A training program conducted in Bartlesville by BDM-Oklahoma technical staff, which included geologists, geophysicists, exploration and drilling specialists, and environmental policy experts. The proposed training schedule offered four courses per year and included those coursed identified by the tribes in the survey. The training program was outlined for members of Native American Tribes whose lands have oil and gas resources. The proposed program contributed to meeting the goals of the U.S. Department of Energy's (DOE) Domestic Oil and Gas Initiative to help Native American tribes become more self-sufficient in developing and managing their resources through training in cost-effective, improved technologies for hydrocarbon production that will meet environmental regulations. The training program outlined was for adult tribal representatives who are responsible for managing tribal mineral holdings or setting policy, or who work in the oil and gas industry. The course content is in response to a survey that was developed by BDM-Oklahoma and sent in the Spring of 1995 to 26 tribal agencies identified through previous contact with DOE. Tribes were asked to indicate course content needs, levels, preferred time of year, and location. Six tribes responded with specific recommendations and needs. These tribes, were the Creek, Pueblo, Cherokee, St. Regis …

Radiocarbon determinations have been obtained on {gamma}-carboxyglutamic acid [Gla] and {alpha}-carboxyglycine (aminomalonate) [Am] as well as acid- and base-hydrolyzed total amino acids isolated from a series of fossil bones. As far as they are aware, Am has not been reported previously in fossil bone and neither Gla nor Am {sup 14}C values have been measured previously. Interest in Gla, an amino acid found in the non-collagen proteins osteocalcin and matrix Gla-protein (MGP), proceeds from the suggestion that it may be preferentially retained and more resistant to diagenetic contamination affecting {sup 14}C values in bones exhibiting low and trace amounts of collagen. The data do not support these suggestions. The suite of bones examined showed a general tendency for total amino acid and Gla concentrations to decrease in concert. Even for bones retaining significant amounts of collagen, Gla (and Am extracts) can yield {sup 14}C values discordant with their expected age and with {sup 14}C values obtained on total amino-acid fractions isolated from the same bone sample.

Clouds of stray electrons are ubiquitous in particle accelerators and frequently limit the performance of storage rings. Earlier measurements of electron energy distribution and flux to the walls provided only a relative electron cloud density. We have measured electron accumulation using ions expelled by the beam. The ion energy distribution maps the depressed beam potential and gives the dynamic cloud density. Clearing electrode current reveals the static background cloud density, allowing the first absolute measurement of the time-dependent electron cloud density during the beam pulse.

The design of the active source for active and passive computed tomography (A&PCT) is critical with respect to accuracy and throughput. The A&PCT active source requirements are highly dependent upon the attenuation properties of the waste matrix within the drum. On of the most highly attenuating waste matrices is sludge. This waste stream will consist of solidified aqueous waste consisting of IDC 001 first stage sludge and IDC 007 wet sludge. Also, the stream consists of solidified organic waste known as code IDC 003 organic setups. We have evaluated the sludge drum data that was previously acquired on the WIT system and have determined that the active source activity must be increased to provide reasonable throughput. The sludge drum that is evaluated here is drum CEPRF11. CEPRF11 is a test drum that was part of the Nondestructive Assay system Capability Evaluation Project (CEP) and contained an actual Rocky Flats waste that is categorized as code 003 solidified organic waste. The full drum was evaluated and found to be somewhat homogenous; therefore, a single slice is arbitrarily chosen to represent the entire drum. Slice number 8 is used and is located approximately at the center of the drum. Figure 1 shows …

During the Phase I program, CCR completed several major building blocks for a 3D large signal, inductive output tube (IOT) code using modern computer language and programming techniques. These included a 3D, Helmholtz, time-harmonic, field solver with a fully functional graphical user interface (GUI), automeshing and adaptivity. Other building blocks included the improved electrostatic Poisson solver with temporal boundary conditions to provide temporal fields for the time-stepping particle pusher as well as the self electric field caused by time-varying space charge. The magnetostatic field solver was also updated to solve for the self magnetic field caused by time changing current density in the output cavity gap. The goal function to optimize an IOT cavity was also formulated, and the optimization methodologies were investigated.

As part of Task 1 in Advanced Technologies for Stripper Gas Well Enhancement, Schlumberger Data & Consulting Services (DCS) joined with two Appalachian Basin producers, Great Lakes Energy Partners, LLC, and Belden & Blake Corporation to develop methodologies for identification and enhancement of stripper wells with economic upside potential. These industry partners previously provided us with data for more than 700 wells in northwestern Pennsylvania. Phase 1 goals of this project were to develop and validate methodologies that can quickly and cost-effectively identify underperforming wells with remediation potential. We enhanced and streamlined our software and are using it with Microsoft's{trademark} Access and Excel programs. During the last quarter of 2002, Great Lakes provided us with additional data for approximately 2,200 wells located in their Cooperstown field situated in northwestern Pennsylvania. We identified approximately 220 potential remediation candidates and Great Lakes personnel reviewed this list for viability and selected more than twenty five wells to be reworked. Approximately fifteen wells have been successfully reworked as of year-end 2004. This field provided a rigorous test of our software and analytical methods. We processed all the information provided to us including the Cooperstown data. Great Lakes also provided supplemental data listing the original …

This report summarizes a quarterly report of the advanced technologies for stripper gas well enhancement during July 1 to September 30, 2004.

The proton driver for the muon collider must produce short pulses of protons in order to facilitate muon cooling and operation with polarized beams. In order to test methods of producing these bunches they have operated the AGS near transition and studied procedures which involved moving the transition energy {gamma} to the beam energy. They were able to produce stable bunches with RMS widths of {sigma} = 2.2-2.7 ns for longitudinal bunch areas of {minus}1.5 V-s, in addition to making measurements of the lowest two orders of the momentum compaction factor.

In this second year of the grant, we have made good progress toward our goals of elucidating the basic materials response to repeated laser pulsing. This work includes both computer simulation and experimentation, as we now describe.

Infill drilling of wells on a uniform spacing, without regard to reservoir performance and characterization, does not optimize reservoir development because it fails to account for the complex nature of reservoir heterogeneities present in many low permeability reservoirs, and carbonate reservoirs in particular. New and emerging technologies, such as geostatistical modeling, rigorous decline curve analysis, reservoir rock typing, and special core analysis can be used to develop a 3-D simulation model for prediction of infill locations. Other technologies, such as inter-well injection tracers and magnetic flow conditioners, can also aid in the efficient evaluation and operation of both injection and producing wells. The purpose of this project was to demonstrate useful and cost effective methods of exploitation of the shallow shelf carbonate reservoirs of the Permian Basin located in West Texas.

Dramatic improvements have been made to the detonation modeling capability recently incorporated into MACH2. These improvements significantly improve the flexibility of the detonation model, allow for accurate depiction of real explosives, and permit highly efficient modeling of long, coaxial generators. In this document, we will first describe these improvements in some detail. We will then discuss the calibration of the detonation model to two explosive materials, PBX9501 and PBXN110. Finally, we will demonstrate the code`s capability for modeling long, coaxial magnetocumulative generators.

The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: (1) Advanced petrophysics; (2) Three-dimensional (3-D) seismic; (3) Crosswell bore tomography; (4) Advanced reservoir simulation; (5) Carbon dioxide (CO{sub 2}) stimulation treatments; (6) Hydraulic fracturing design and monitoring; and (7) Mobility control agents.

The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: (1) Advanced petrophysics; (2) Three-dimensional (3-D) seismic; (3) Crosswell bore tomography; (4) Advanced reservoir simulation; (5) Carbon dioxide (CO{sub 2}) stimulation treatments; (6) Hydraulic fracturing design and monitoring; and (7) Mobility control agents.

This project is designed to develop methods for pre-combustion coal remediation by implementing recent advances in enzyme biochemistry. The novel approach of this study is incorporation of hydrophilic oxidative enzymes in reverse micelles in an organic solvent. Enzymes from commercial sources or microbial extracts are being investigated for their capacity to remove organic sulfur from coal by oxidation of the sulfur groups, splitting of C-S bonds and loss of sulfur as sulfuric acid. Dibenzothiophene (DBT) and ethylphenylsulfide (EPS) are serving as models of organic sulfur-containing components of coal in initial studies.

This project is designed to develop methods for pre-combustion coal remediation by implementing recent advances in enzyme biochemistry. The novel approach of this study is incorporation of hydrophilic oxidative enzymes in reverse micelles in an organic solvent. Enzymes from commercial sources or microbial extracts are being investigated for their capacity to remove organic sulfur from coal by oxidation of the sulfur groups, splitting of C-S bonds and loss of sulfur as sulfuric acid. Dibenzothiophene (DBT) and ethylphenylsulfide (EPS) are serving as models of organic sulfur-containing components of coal in initial studies.

This report describes a proposed system for automating atomic absorption analysis. The system consists of two atomic absorption instruments and an automatic sampler that can be attached to either instrument. A computer program controls the sampling and gathers data. The program then uses the data to perform bookkeeping, data processing, and report writing.

None

The BABAR Silicon Vertex Tracker (SVT) has been efficiently operated for six years since the start of data taking in 1999. Due to higher than expected background levels some unforeseen effects have appeared. We discuss: a shift in the pedestal for the channels of the AToM readout chips that are most exposed to radiation; an anomalous increase in the bias leakage current for the modules in the outer layers. Estimates of future radiation doses and occupancies are shown together with the extrapolated detector performance and lifetime, in light of the new observations.

The objectives of the study are to: Develop a baseline design for indirect liquefaction using advanced Fischer-Tropsch (F-T) technology. Prepare the capital and operating costs for the baseline design. Develop a process flowsheet simulation (PFS) model. The baseline design, the economic analysis, and the computer model will be the major research planning tools that Pittsburgh Energy Technology Center will use to plan, guide, and evaluate its ongoing and future research and commercialization programs relating to indirect coal liquefaction for the manufacture of synthetic liquid fuels from coal.

The objectives of the study are to: Develop a baseline design for indirect liquefaction using advanced Fischer-Tropsch (F-T) technology. Prepare the capital and operating costs for the baseline design. Develop a process flowsheet simulation (PFS) model. The baseline design, the economic analysis, and the computer model will be the major research planning tools that Pittsburgh Energy Technology Center will use to plan, guide, and evaluate its ongoing and future research and commercialization programs relating to indirect coal liquefaction for the manufacture of synthetic liquid fuels from coal.

This report discuss the design of the Plutonium Reclamation Facility the capacity of which will be 300 kilograms per month or 3600 kilograms per year or plutonium. The subject facility, as the name implies, must be extremely flexible in its ability to handle a wide variety of feed materials. The new facility will be operating on a three-shift day, five-day week, 40-week year with an overall efficiency of 75 percent; twelve weeks per year will be required for ``turnaround`` time to enable campaign operation for segregation of feed plutonium by isotopic content.

The importance of the performance of threads libraries is growing as clusters of shared memory machines become more popular POSIX threads, or Pthreads, is an industry threads library standard. We have implemented the first Pthreads benchmark suite. In addition to measuring basic thread functions, such as thread creation, we apply the L.ogP model to standard Pthreads communication mechanisms. We present the results of our tests for several hardware platforms. These results demonstrate that the performance of existing Pthreads implementations varies widely; parts of nearly all of these implementations could be further optimized. Since hardware differences do not fully explain these performance variations, optimizations could improve the implementations. 2. Incorporating Threads Benchmarks into SKaMPI is an MPI benchmark suite that provides a general framework for performance analysis [7]. SKaMPI does not exhaustively test the MPI standard. Instead, it

The fascinating shapes and hierarchical designs of biomineralized structures are an inspiration to materials scientists because of the potential they suggest for biomolecular control over materials synthesis. Conversely, the failure to prevent or limit tissue mineralization in the vascular, skeletal, and urinary systems is a common source of disease. Understanding the mechanisms by which organisms direct or limit crystallization has long been a central challenge to the biomineralization community. One prevailing view is that mineral-associated macromolecules are responsible for either inhibiting crystallization or initiating and stabilizing non-equilibrium crystal polymorphs and morphologies through interactions between anionic moieties and cations in solution or at mineralizing surfaces. In particular, biomolecules that present carboxyl groups to the growing crystal have been implicated as primary modulators of growth. Here we review the results from a combination of in situ atomic force microscopy (AFM) and molecular modeling (MM) studies to investigate the effect of specific interactions between carboxylate-rich biomolecules and atomic steps on crystal surfaces during the growth of carbonates, oxalates and phosphates of calcium. Specifically, we how the growth kinetics and morphology depend on the concentration of additives that include citrate, simple amino acids, synthetic Asp-rich polypeptides, and naturally occurring Asp-rich proteins found in both …

The U.S. Department of Energy (DOE) and the Ohio Coal Development Office (OCDO) have recently initiated a project aimed at identifying, evaluating, and qualifying the materials needed for the construction of the critical components of coal-fired boilers capable of operating at much higher efficiencies than current generation of supercritical plants. This increased efficiency is expected to be achieved principally through the use of ultrasupercritical steam conditions (USC). The project goal initially was to assess/develop materials technology that will enable achieving turbine throttle steam conditions of 760 C (1400 F)/35 MPa (5000 psi), although this goal for the main steam temperature had to be revised down to 732 C (1350 F), based on a preliminary assessment of material capabilities. The project is intended to build further upon the alloy development and evaluation programs that have been carried out in Europe and Japan. Those programs have identified ferritic steels capable of meeting the strength requirements of USC plants up to approximately 620 C (1150 F) and nickel-based alloys suitable up to 700 C (1300 F). In this project, the maximum temperature capabilities of these and other available high-temperature alloys are being assessed to provide a basis for materials selection and application under …