From introduction: "The ORNL-ANP liquid-to-liquid heat exchanger design and development effort has been based on an exceptionally high performance matrix of closely-spaced small diameter tubes that permits practically pure counter-flow operation. In the course of full-scale aircraft power plant design work a number of charts for this type of heat exchanger has been prepared. These charts were intended in part to show the effects of the various parameters in a readily understandable form, and in part to simplify and to reduce markedly the chore of making detailed design calculations. These charts have proved so helpful it seemed very worthwhile to assemble them into a report along with brief explanations and sample calculations."

From abstract: "On the 86-inch cyclotron a 41-kw beam has been calorimetered at a net ion loading efficiency of 40%; the average proton current was 1.85 ma at 22.5 Mev. Practical specific yields have been determined for (p,2n) reactions on zinc and bismuth. The investigation of products of proton-induced fission of uranium has been continued and new techniques are being used in measuring angular distribution of reaction products. The 63-inch heavy particle cyclotron is now in operation; N+++ particles have been accelerated to ~25 Mev. In preliminary tests, induced activities have been detected in carbon, nitrogen, and oxygen targets. A hot-cathode ion source is ready for test operation. The 22-inch cyclotron is being used in an investigation of the problems associated with the use of rf and dc electrodes for the acceleration of protons from the ion source into the dees. Radiation-induced corrosion in Inconel tubing containing #21 eutectic (ANP) has been produced by proton irradiation in the 86-inch cylclotron; it is shown that the corrosion was not due to thermal effects. Approximately 150 grams of highly purified U 238 (< 5 ppm U 235) have been prepared, and two grams of thorium 230 (ionium) has been enriched to 90.6%."

Technical report outlining the physical operability of 30% tributyl phosphate in a hydrocarbon dilutent for the extraction of uranium from more feed slurries. Operability had been satisfactorily demonstrated in jet mixing columns at the pilot plant of the Mallinckrodt Chemical Works. [From Abstract]

Technical report containing a comprehensive study of the physical metallurgy of thorium and some of its alloys containing additions of Be, Si, Zr, Ti, Al, Nb, Cr, Mn, and Ce. Melting range, fabricating characteristics, and tensile properties were studied. [From Abstract]

Technical report covering the metallurgy of thorium and on fabrication techniques. Report investigates the stability and corrosion resistance of thorium exposed to eutectic NaK, extrusion as a means of fabrication of thorium tubes or rods, and corrosion of large single metal crystals by liquid metals. [From Summary]

The fabrication, irradiation and evaluation of the first two superheat fuel assemblies is described in detail. Experimental data indicate that, in general, the nuclear superheat fuel elements have performed satisfactorily under the testing conditions used. Certain problem areas which will influence future fuel element designs have been defined.

This quarterly progress discusses the ongoing work at the Oak Ridge National Laboratory for the quarter ending in March 10, 1952. Topics discussed include reactor theory and design, shielding research, materials research, and includes appendixes with supplemental information.