Many industrial and environmental processes, including bioremediation, would benefit from the feedback and control information provided by a local multi-analyte chemical sensor. For most processes, such a sensor would need to be rugged enough to be placed in situ for long-term remote monitoring, and inexpensive enough to be fielded in useful numbers. The multi-analyte capability is difficult to obtain from common passive sensors, but can be provided by an active device that produces a spectrum-type response. Such new active gas microsensor technology has been developed at Argonne National Laboratory. The technology couples an electrocatalytic ceramic-metallic (cermet) microsensor with a voltammetric measurement technique and advanced neural signal processing. It has been demonstrated to be flexible, rugged, and very economical to produce and deploy. Both narrow interest detectors and wide spectrum instruments have been developed around this technology. Much of this technology's strength lies in the active measurement technique employed. The technique involves applying voltammetry to a miniature electrocatalytic cell to produce unique chemical ''signatures'' from the analytes. These signatures are processed with neural pattern recognition algorithms to identify and quantify the components in the analyte. The neural signal processing allows for innovative sampling and analysis strategies to be employed with the …

This document presents the Treatability Study Preliminary Report for the D-Area Coal Pile Runoff Basin Groundwater at the Savannah River Site.

This study measured the adsorption of cesium from simulated Savannah River Site liquid waste onto crystalline silicotitanate (CST) in equilibrium (Kd) and ion exchange column tests.

The Building 200/205 Pneumatic Transfer Tube D&D Project was directed toward the following goals: Remove any radioactive and hazardous materials associated with the transfer tube; Survey the transfer tube to identify any external contamination; Remove the transfer tube and package for disposal; Survey the soil and sand surrounding the transfer tube for any contamination; and Backfill the trench in which the tube sat and restore the area to its original condition. These goals had been set in order to eliminate the radiological and hazardous safety concerns inherent in the buried transfer tube and to allow, upon completion of the project, the removal of this project from the ANL-E action item list. The physical condition of the transfer tube and possible nuclear fuel samples lost in the tube were the primary areas of concern, while the exact location of the transfer tube was of secondary concern. ANL-E health physics technicians collected characterization data from the ends of the Building 200/205 pneumatic transfer tube in January 1998. The characterization surveys identified contamination to a level of 67,000 dpm (1,117 Bq) ({beta}/{gamma}) and 20,000 dpm (333 Bq) {alpha} smearable at the opening.

None

Both NA44 and EOS continue to publish high quality data on relativistic heavy ion collisions. The next leap in energy will be provided by BRAHMS at RHIC. Experiment NA44 has measured particle correlations of {pi}{sup {+-}}, K{sup +} and protons and single particle distributions of {pi}{sup {+-}}, K{sup {+-}}, p, {anti p}, d and {anti d} for pA, SA and PbPb collisions at 450GeV/c, 200A{center_dot}GeV and 158A{center_dot}GeV for the p, S and Pb beams respectively. When the spectra are fitted to an exponential in m{sub T}, the inverse slopes increase as the system gets heavier and with increasing particle mass. For larger systems the baryon density at mid-rapidity increases implying more secondary collisions. These fuel a collective expansion and a boost in transverse momentum proportional to the mass as seen in the data. The EOS collaboration has continued to publish results from their large data set of heavy ion collisions at the BEVALAC. They plan to study the energy dependence of coalescence and flow by comparing results from NA44 and EOS.

This document describes characterization requirements for the Tank Waste Remediation System (TWRS) Waste Disposal Program's privatization efforts in support of low-activity waste (LAW) treatment and immobilization, This revised Data Quality Objective (DQO) replaces earlier documents (PNNL 1997; DOE-W 1998zq Wiemers 1996). Revision O of this DQO was completed to meet Tri-Party Agreement (TPA) target milestone M-60-14-TO1. Revision 1 updates the data requirements based on the contract issued `August 1998 (DOE-RL 1998b). In addition, sections of Revision O pertaining to "environmental planning" were not acceptable to the Washington State Department of Ecology (Ecology) and have been removed. Regulatory compliance for TWRS Privatization is being addressed in a separate DQO (Wiemers et al. 1998). The Project Hanford Management Contract (PHMC) Contractors and the private contractor may elect to complete issue-specific DQOS to accommodate their individual work scope.

None

None

A modified analytical system was assembled and calibrated, in preparation for a second run with cesium (Cs)-promoted �zinc chromite� catalyst. A new column for the on-line gas chromatography (GC) was purchased for the analysis of various light olefin and paraffin isomers. A run was carried out in the continuous stirred autoclave using the Cs-promoted catalyst. Decahydronaphfialene was used as the slurry liquid. Reaction conditions were 375°C, 2000 psig total pressure, 0.5 H&sub2;/CO ratio, and 5000 sL/Kg (cat.)-hr. Analysis of the data from this run is in progress. A manuscript on the thermal stability of potential slurry liquids was submitted to 'Industrial and Engineering Chemistry Research,' and a paper was presented at the 1997 Spring National Meeting of the American Institute of Chemical Engineers, Houston, Texas.

The purpose of this report is to document our current preliminary design for the Can-in-Canister rack and magazine. Since this is a developmental project with testing still ongoing, these designs will probably change as we become more knowledgeable of the functions, reliability, and cost of these designs.

The Salt Disposition Systems Engineering Team identified the adsorption kinetics of actinides and strontium onto monosodium titanate (MST) as a technical risk for several of the processing alternatives selected for additional evaluation in Phase III of their effort. The Flow Sheet Team requested that the Savannah River Technology Center (SRTC) examine the adsorption kinetics of MST for several process alternatives.This study consisted of a statistically designed set of tests to determine the rate of adsorption of strontium, uranium, neptunium and plutonium as a function of temperature, MST concentration, and concentrations of sodium, strontium, uranium, neptunium and plutonium. Additional tests incorporated into the design assess the effects of mixing as well as the influence from the presence of sludge solids and sodium tetraphenylborate.

In support of the Salt Disposition team, scoping studies have been performed on the radiolysis of moist and aqueous slurries of Crystalline Silicotitanate(CST). If CST is used for removal of Cs-137 from SRS salt solutions, radiolysis of the water by Cs-137 on the CST will produce H2. Also it has been shown that the presence of a solid in the system can enhance the production of H2 by transferring absorbed energy from the solid to the water (1). As indicated in the test plan (2) for this scoping study, it is the intent of this study to determine if CST enhances the radiolytic production of H2 and to estimate the radiolytic hydrogen generation rate from an aqueous CST slurry in a column at the maximum expected Cs-137 loading on the CST.Initially several CST slurry systems were irradiated with Co-60 gamma rays and the radiolytic yield of H2 measured in terms of its G value (molecules of H2 produced per 100 eV of energy absorbed). Based on the results of these tests it was determined that CST did not enhance the radiolytic production of H2 by transferring energy to the water and causing it to decompose.Calculations were then performed to estimate …

A series of laboratory experiments has been performed to determine flowsheet conditions for formation of boron solids during processing of glovebox floor sweepings (FS) and sand, slag, and crucible (S,S, and C) materials in canyon dissolvers. The precipitation of a boron compound (KBF4) was identified during the flowsheet development work for processing Rocky Flats S,S, and C materials at Savannah River. The subsequent series of laboratory experiments has focused on flowsheet conditions planned for the dissolution of glovebox floor sweepings in S,S, and C solutions.The concentrations of potassium fluoride (KF) and total fluoride were established where precipitation of boron solids would and would not occur during the processing of floor sweepings. Other variables such as changes in nitric acid and iron concentrations were found to have no impact on formation of boron solids. Results presented in Table 1 indicate that boron solids will not form at 0.22 molar KF and 0.30 molar total fluoride during processing of floor sweepings and at 0.22 molar KF and 0.32 molar total fluoride during processing of S,S, and C materials.

Sludge washing and parametric caustic leaching tests were performed on sludge samples tiom five Hanford tanks: B-101, BX-1 10, BX-112, C-102, and S-101. These studies examined the effects of both dilute hydroxide washing and caustic leaching on the composition of the residual sludge solids. ` Dilute hydroxide washing removed from <1 to 25% of the Al, -20 to 45% of the Cr, -25 to 97% of the P, and 63 to 99% of the Na from the Hdord tank sludge samples examined. The partial removal of these elements was likely due to the presence of water-soluble sodium salts of aluminate, chromate, hydroxide, nitrate, nitrite, and phosphate, either in the interstitial liquid or as dried salts.

Metallothermic reductions have been extensively studied in the field of extractive metallurgy. At Argonne National Laboratory (ANL), we have developed a molten-salt based reduction process using lithium. This process was originally developed to reduce actinide oxides present in spent nuclear fuel. Preliminary thermodynamic considerations indicate that this process has the potential to be adapted for the extraction of other metals. The reduction is carried out at 650 C in a molten-salt (LiCl) medium. Lithium oxide (Li{sub 2}O), produced during the reduction of the actinide oxides, dissolves in the molten salt. At the end of the reduction step, the lithium is regenerated from the salt by an electrowinning process. The lithium and the salt from the electrowinning are then reused for reduction of the next batch of oxide fuel. The process cycle has been successfully demonstrated on an engineering scale in a specially designed pyroprocessing facility. This paper discusses the applicability of lithium in molten-salt reduction processes with specific reference to our process. Results are presented from our work on actinide oxides to highlight the role of lithium and its effect on process variables in these molten-salt based reduction processes.

BioSimMER (Bioterrorism Simulated Medical Emergency Response) is a Virtual Reality-based mission rehearsal and training environment. BioSimMER employs contingency-oriented, multiple-path algorithms and MOESINIOPS focused on real-world operations. BioSimMER is network-based and immerses multiple trainees in a high resolution synthetic environment, including virtual casualties and instruments that they may interact with and manipulate. Trainees are represented as individuals by virtual human Avatars. The simulation consists of several components: virtual casualties dynamically manifest the symptoms of their injuries and respond to the intervention of the trainees. Agent transport analysis is used to simulate casualty exposures and to drive the responses of simulated sensors/detectors. The selected prototype scenario is representative of combined injuries anticipated in BW operations.

Most accelerator magnets for applications in the field range up to 9 T utilize NbTi superconductor and a cosine theta coil design. For fields above 9 T, it is necessary to use Nb{sub 3}Sn or other strain sensitive materials, and other coil geometries that are more compatible with these materials must be considered. This paper describes their recent efforts to design a series of racetrack coil magnets that will provide experimental verification of this alternative magnet design for a dual aperture dipole magnet with the goal of reaching a field level of 15 T, will be described. The experimental program, which consists of a series of steps leading to a high field accelerator quality magnet, will be presented. Fabrication of a racetrack dipole magnet utilizing Nb{sub 3}Sn superconductor and a wind and react approach will be presented.

We have constructed a high resolution scanning x-ray microscope at the 2-ID-B beamline at the Advanced Photon Source for 1-4 keV x-ray imaging and microspectroscopy experiments. The microscope uses a Fresnel zone plate to focus coherent x-ray undulator radiation to a 150 nm focal spot on a sample. The spectral flux in the focus is 10{sup 8} ph/s/0.1% BW. X-ray photons transmitted by the sample are detected by an avalanche photodiode as the sample is scanned to form an absorption image. The sample stage has both coarse and fine translation axes for raster scanning and a rotation axis for microtomography experiments. The incident x-ray beam energy can also be scanned via the 2-ID-B monochromator while the sample is kept in focus to record spatially resolved absorption spectra. We have measured the performance of the instrument with various test objects. The microscope hardware, software, and performance are discussed in this paper.

The electronic defect density of native, anodic, and synthetic Al oxide layers on Al were studied by solid state electrical measurement as a function of hydration OF the oxide. The non-hydrated synthetic Al oxide layers, which included electron cyclotron resonance (ECR) plasma deposited oxides as well as ECR plasma grown oxides, were highly insulating with electrical transport dominated by thermal emission from deep traps within the oxide. Following hydration these oxides and the native oxides exhibited a large increase in electronic defect density as evidenced by increases in the DC leakage current, reduction in the breakdown field, and increase in AC conductance. Elastic recoil detection of hydrogen revealed that hydration leads to hydrogen incorporation in the oxide films and hydrogen injection through the films into the Al layer below. The increase in electronic defect concentration is related to this hydrogenation and may play a significant role in localized corrosion initiation.

The performance of (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub y} (Bi-2223) superconducting tapes in magnetic fields at 77 K is critical for winding this material into high-field magnets. We have recently enhanced the transport current (I{sub c}) of multifilament Ag-clad Bi-2223 tapes in a self-field at 77 K by increasing the packing density of the precursor powder improving the mechanical deformation, optimizing the conductor design, and adjusting the cooling rate. I{sub c} values of &gt;40 A were obtained repeatedly. However, a transport current of 42 A in a self-field declined to 4 A in a 0.2 T magnetic field applied parallel to the c-axis at 77 K. A new composite tape was then fabricated in which a YBa{sub 2}Cu{sub 3}O{sub 7{minus}{delta}} (Y-123) film was deposited on the top of the Ag-sheathed Bi-2223 tape to shield the applied magnetic field and protect the central Bi-2223 filaments. Magnetization measurements showed that the critical current densities of the Y-123-coated, Ag-sheathed Bi-2223 tapes were higher than those of an uncoated tape. These preliminary results may provide the basis for further improving the processing of long-length Bi-2223 tapes for high-field applications.

The title implies an impossibly broad field, as the Standard Model includes the fermion matter states, as well as the forces and fields of SU(3) x SU(2) x U(1). For practical purposes, I will confine myself to electroweak unification, as discussed in the lectures of M. Herrero. Quarks and mixing were discussed in the lectures of R. Aleksan, and leptons and mixing were discussed in the lectures of K. Nakamura. I will essentially assume universality, that is flavor independence, rather than discussing tests of it. I will not pursue tests of QED beyond noting the consistency and precision of measurements of {alpha}{sub EM} in various processes including the Lamb shift, the anomalous magnetic moment (g-2) of the electron, and the quantum Hall effect. The fantastic precision and agreement of these predictions and measurements is something that convinces people that there may be something to this science enterprise. Also impressive is the success of the ''Universal Fermi Interaction'' description of beta decay processes, or in more modern parlance, weak charged current interactions. With one coupling constant G{sub F}, most precisely determined in muon decay, a huge number of nuclear instabilities are described. The slightly slow rate for neutron beta decay was …

During fiscal year 1999, the level of success achieved by the Tank Waste Remediation System (TWRS) shall be determined by specific performance measures. These measures take the form of significant deliverables, one of which is the completion of Tank Characterization Reports (TCRS). In order to achieve success regarding the TCR performance deliverable, multiple organizations across TWRS must work together. Therefore, the requirements and expectations needed from each of these TWRS organizations were examined in order to gain an understanding of the performance necessary from each organization to achieve the end deliverable. This memorandum of understanding (MOU) documents the results of this review and establishes the performance criteria by which TWRS will assess its progress and success. These criteria have been determined based upon a TWRS Characterization Project budget of $42.1 million for fiscal year 1999; if this budget is changed or the currently identified workscope is modified, this MOU will need to be revised accordingly. This MOU is subdivided into six sections, where sections three through six each identify individual interfaces between TWRS organizations. The specific performance criteria related to each TWRS organizational interface are then delineated in the section, along with any additional goals or issues pertaining to that …

Most analytical solutions and computer codes for well-test analysis assume a radial flow geometry around a well even though actual flow geometries can be quite different particularly in fractured media. Accurate estimation of hydraulic parameters requires knowledge of the flow geometry. Flow dimensions, representing the combined effects of flow geometry and variations in hydraulic properties, em be interpreted from the late-time slope of the pressure derivative on a log-log plot. However, the interpreted flow dimensions could be caused by an infinite number of flow geometry and hydraulic property combinations. Identifying the correct flow geometry so that appropriate hydraulic properties can be calculated is a difficult process, requiring additional information from a variety of sources. Defining a "conservative" model for a system with nonradial flow dimensions is problematic at best. Errors are compounded when hydraulic properties interpreted by force-fitting radial model to tests in nonradial systems are used in flow and transport models that also fail to take proper account of flow geometry. Whatever the flow dimension of a system might be, proper test interpretation and careful model construction, calibration, and testing are required to provide accurate modeling of flow and transport in that system.