Abstract: The report describes the results of an experimental study involving the injection of a gaseous secondary jet into an unbounded supersonic flow field which was uniform outside of a turbulent boundary layer. The investigation was principally concerned with the formulation of the shock wave shapes and streamline patterns to be associated with typical turbulent, two-dimensional jet-interaction flows. In support of this objective, results are presented for a Mach 5 test conducted using a flat-plate model containing a sonic secondary jet directed normal to the main-stream. The jet-interaction flow field was primarily investigated for jet strengths (ratio of jet gas stagnation pressure to free-stream static pressure) of 180 and 550. Intermediate strengths were also studied but in lesser detail. Local flow properties were measured throughout the flow field and surface pressure distributions were recorded fore and aft of the secondary jet. From these data and complementary shadowgraph studies, the streamline pattern and attendant shock structure were formulated.

The following report presents data from the SALMON experiment, an experiment made to study the mechanics of a tamped nuclear detonation in a salt dome in terms of generated shock waves as they are propagated out of the dome and progressively through the crust and mantle of the earth. This experiment was made in the Tatum salt dome, Mississippi, October 22, 1964.

Abstract. The rate constants for the reaction of the hydrated electron eaq with a number of solutes and with radicals formed in water radiolysis are reported. Hydrated electrons were formed in the electron pulse irradiated solutions at concentrations in the range from 1 to 10 pM. Their reaction was followed by the decay of the optical absorption of eaq at 5780 A. Generally a 04 psec pulse of 15 MeV electrons was used. In the absence of eaq scavengers, second-order kinetics prevailed owing to the dominance of the reactions,eaq+eaq, eaq+H, and eaq+H202 when OH radical scavengers were present in alkaline solution. An analysis of the decay curves leads to values for keaq+eaq and keaq+H of 0.9~ 1010 and 3 x 1010 M-1 sec-1, respectively. With scavenger present in excess over [eaq], pseudo first-order kinetics were found and rate constants for a number of inorganic and organic compounds are reported. The agreement of these and other rate constants with diffusion-controlled reaction theory is discussed.

Report documenting the progress of the Army Gas-Cooled Reactor Systems Program to develop a mobile, low-power, nuclear power plant for Military field operation.

"A brief examination of the post irradiation grafting of machine irradiated polyethylene film with acrylic acid monomer was made. Evidence of postgrafting was detected in samples that had been irradiated to a total dose of 10 Mrads at a dose rate of 0.01 Mrad/sec. and then exposed to a 25% purified acrylic acid solution in benzene for periods of 1 to 4 days."

From abstract: "To investigate the deviation of the internal conversion coefficients of E2 transitions from theoretical computations and their dependence on nuclear deformation, the total internal conversion coefficient of the 121.8-kev 2+-0+ transition in ellipsoidal Sm152[over]90 was measured to be 1.135 ± 0.010 with a high accuracy coincidence-sum method. The K-shell to total internal conversion ratio was determined to be 0.588 ± 0.003 with a [beta] spectrometer...The experiment revealed no deviation from theory nor indications of strong dependence on nuclear deformation; it therefore did not confirm recent beliefs in this regard. The details of the coincidence-sum method were described. The K electron to total electron capture ratio, from Eu152 to the 1.53 Mev state in Sm152 was also measured to be 0.79±0.02."

"As a part of a program to determine the p-p scattering matrix at 213 Mev, the triple scattering parameters R and A were measured at 30, 40, 50, 60, 70, 80. and 90 deg in the center-of-msss system. The results are compared with a phase shift analysis by MacGregor and Moravcsik and with the predictions of the boundary condition model of Saylor, Bryan and Marshak."

Report issued by the Oak Ridge National Laboratory discussing studies conducted on corrosion by fluorides. Equipment, procedures, results, and analysis is presented. This report includes tables, illustrations, and photographs.

Report containing "the results of a study which was directed at providing additional experimental loop irradiation space for the AEC-DRD testing program. It was a premise that the experiments allocated to this reactor were those that could not be accommodated in the MTR, ETR or in existing commercial test reactors" (p. 5).

"ABS>Injection trajectories were calculated for different injection conditions for the Cambridge Electron Accelerator, considering also the effect of magnetic fringing fields. The general problem of matching the emittance of the linac to the acceptance of the synchrotron in the transversal phase space is considered, and it is shown that this can be done by a set of two quadrupole lenses. In order to eliminate rudial betatron oscillations due to energy deviations of the injected particles, a pulsed electric quadrupole lens in the synchrotron in combination with two deflectors between linac and synchrotron can be used to place particles of different energies on their specific equilibrium orbits. A layout of the whole injection system following the output of the linac is given."

Safety measures of the Livermore Pool Type Reactor in reaction to certain meteorological conditions and following the improbable rupture of the reactor building.

Abstract: "Uranium monocarbide-Zircaloy II alloy cermets were developed and tested for chemical and physical properties. It was determined that pure uranium monocarbide can be prepared by vacuum are melting techniques. Following melting, the combination, hot pressing, and corrosion behavior of dense monocarbide has been studied. The preparation of uranium monocarbide-Zircaloy II cermet bodies was investigated by means of hot pressing, cold pressing and sintering, warm pressing, extrusion, and hot rolling. The corrosion resistance of the cermets was related to such variables as composition, preparation technique, and powder size. 01 per cent uranium monocarbide, 70 per cent zircaloy II cermets withstood corrosion tests in 680 F water. Cermets having above 30 weight per cent uranium monocarbide were not corrosion resistant."

Detailed information on the radiations associated with several even-even isotopes has been obtained. In some instances enough information has been gathered to allow construction of skeleton energy level diagrams for the isotopes. Activities studied were obtained from pile irradiation of pure odd-even natural isotopes and included Dy160, W182, Sm152, Gd152 and Gd154. Details of the work done on and results obtained for these isotopes are reported in section 3. Some analytic and experimental studies were carried out on the application of tilting beta-ray spectrograph sources for improvement of resolution. The uses and limitation of this technique are discussed in section 2.

A report regarding a drilling project at Tenderfoot Mesa, Mesa County, Colorado.

Abstract: "A general description is given of the permanent zirconium plant at Y-12. Equipment is described and materials of construction are listed. Photographs illustrating principal equipment and reduced construction drawings are also presented. Operating conditions and costs information are listed."

Abstract: A re-evaluation of the cost of producing essentially hafnium free zirconium as zirconium oxide at a rate of 150,000-200,000 pounds zirconium per year by solvent extraction of the metal thiocyanates in a permanent plant has been made. Using part of the present temporary facilities, the cost, with five year amortization of the plant, will be $3.15 per pound zirconium. A by-product of the mixed oxides of hafnium and zirconium, having at least fifty percent hafnium and perhaps as high as ninety percent hafnium, can be made available with little additional cost.

Abstract: Use of the mixer-settler apparatus as a rapid means of determining improved conditions for plant operation is described including the experimental details. The preparation of highly purified samples of both zirconium oxide and hafnium oxide is discussed. (This document is concerned almost entirely with explorations of small scale continuous systems. Another document dealing with this general problem using small scale batch operations is being published simultaneously. It should prove of advantage to the reader to study this companion report, Document Y-611, by Barton, Overholser, and Grimes, to obtain a complete picture of the available information.).

"The most hasardous conditions relating to the storage and handling of the SRE fuel are those in which water and fuel form a possible critical assembly. Therefore, this memorandum is primarily devoted to an analysis of the conditions necessary for a critical mixture of water and SRE fuel. Certain special geometries are then analyzed for their safeness."

Describes the current prototype model of a linear amplifier, two-channel pulse-height analyser, two-channel count-rate meter, and count-rate difference detector for a gamma-ray spectrometer monitor developed to approach the above design criteria.

The preparation of radioactive metallurgical specimens for microscopic examination is one of the responsibilities of the Radiometallurgy Sub-Unit. An abrasive cut-off machine development program, based upon a previous experimental model, was undertaken to provide a method for sectioning of irradiated materials without undue personnel exposure or spread of contamination and finally to provide data for the design of an abrasive cutting unit for use in the work cells in the Radiometallurgy Building. A horizontal-feed type set-off machine, powered by a 7 1/2 hp motor with V-belt drive, has been developed for the submerged sectioning of irradiated uranium and is currently being used successfully to obtain samples for metallurgical, chemical and physical investigations without excessive personnel exposure or spread of radioactive contaminates.

The monitoring of thermal and resonance neutron flux in a thermal reactor having high flux over periods of time from 1 to 12 months using think Co foils is considered. Special attention is paid to the many correction factors to be applied to the activation data; neutron temperature, effective cadmium cutoff energy, burnout of Co59 and Co60, and decay of Co60. Results on a homogeneity test of 10 mil, 0.08% Co-A1 alloy foils is given.

Abstract:"A method is described for the electroreduction of plutonium to the +3 valence state in a nitric acid-sulfamic acid solution. Exploratory experiments in the search for a coulometric titration of Pu(III) using electrolytically generated ceric ion are also described. The results strongly indicate that a convenient procedure can be devised. Suggestions for future work are presented."

Technical report calculating "effective removal cross sections" for Pb, Fe and O from measurements of fast neutron does in the water surrounding the BSF reactor. The values for Pb and Fe agree quite well with those previously determined from Lid tank data, whereas that for O is somewhat lower. [From Abstract]

From abstract: "The extraction of acids with long-chain amines is described. Preliminary results on the extraction of the amine salts of polonium, plutonium and uranium are given."