Comparing the results of the calculations for computing the mean pressure of an aviation engine for any number of revolutions, with those of experiment, the writer, by numerous examples, shows the perfect agreement between them. This report will show that, by means of a special abacus, an engineer can instantly plot the characteristics of an engine.

The aim was to bring attention to what might be the cause of some aircraft accidents for which there was no satisfactory explanation. The author notes that in testing aircraft accidents at the Bureau of Standards, it happened frequently that the engine performance became erratic when the temperature of the air entering the carburetor was between 0 C and 20 C. Investigation revealed the trouble to have been caused by the formation and collection of snow somewhere between the entrance to the carburetor and the manifold, probably at the throttle.

This report presents a method of calculating polar curves which is at least as precise as graphical methods, but it more rapid. Knowing the wind tunnel test of a wing and the performances of an airplane of the same profile, it is easy to verify the characteristic coefficients and, at the same time, the methods determining induced resistances.

As the purpose of the report is to transmit as smoothly and as easily as possible, certain facts and ideas, to the average person likely to read it, it should be written in a full and simple enough manner to be comprehended by the least tutored, and still not be boring to the more learned readers.

Much attention is given here to the design of the wind tunnel and the experimental set-up. In comparing their results on the wind resistance of spheres to the results of other researchers, the authors find wide discrepancies. They are unable to explain the cause of the discrepancies, concluding, as they do, that the differing results could not be explained by the action of the wind tunnel walls.

The author argues that because of a general misunderstanding of the principles of flight at low speed, there are a large number of airplanes that could be made to fly several miles per hour slower than at present by making slight modifications. In order to show how greatly the wing section affects the minimum speed, curves are plotted against various loadings. The disposition of wings on the airplane slightly affects the lift coefficient, and a few such cases are discussed.

This report presents a table of specifications of the rotary engine and a very brief description of some of the notable features such as the exhaust valves controlled by means of a fixed cam gear.

"It should be clear that in order to obtain a lift it is necessary that the air which flows past an aerofoil be given a downward acceleration; indeed the lift can be only the reaction produced by the downward acceleration of the flowing air. The motion of the air in the neighborhood of an aerofoil may be followed theoretically with great exactness. In the following, it will be undertaken to make understood, through the simplest possible considerations, the effect of span and loading on the air force on an aerofoil, and while these do not form a strong proof of the correctness of the formulae developed, yet they explain the essential features of the phenomena" (p. 1).

In the subdivided wing section profile, the diagram of the current is entirely changed and the harmful formation of eddies is avoided through premature deflection. Pressure equalization does not occur between the upper and under sides. This report presents a discussion of the various laws relating to wing design with the conclusion being that lift increases with more acute angles of attack.

This report details the Rumpler Limousine which was a further development of the well known type 5 A 2. The fuselage, engine, cabin, wings, controls, and landing gear are all discussed.

Different aircraft engines are categorized as being of interest to only the Army or Navy or to both armed services. A listing of the different engines is presented along with some statistics, namely, horsepower.

The problem of insuring the emerging commercial aeronautic industry is detailed. The author also motes that a complete solution cannot be obtained until the necessary statistics are compiled.

We see with great satisfaction that Bagnulo's studies and experiments on his high-speed, heavy-fuel engines, promise to solve not only the general problem of economical power and hence of thermal efficiency, but also all other special problems, of weight and space, and, what is still more important, range of error.

The favorable speed of an airship is chiefly determined by the condition of the consumption of the least amount of fuel per unit of traveled distance, although other conditions come into play. The resulting rules depend on the character of the wind and on the variability of the efficiency of the engine propeller units. This investigation resulted in the following rules. 1) Always keep the absolute course and steer at such an angle with reference to it as to neutralize the side wind. 2) In a strong contrary wind, take a speed one and one half times the velocity of the wind. 3) As a general rule, take the velocity of the wind and the velocity of the course component of the wind. Add them together if the wind has a contrary component, but subtract them from each other if the wind has a favorable component.

Different systems of navigations beacons are discussed with an emphasis on radiotelegraphy and radiotelephony.

In the following report, we will first draw some conclusions of purely theoretical interest, from the general equations of motion. At the end, we will consider the motion of an airplane, with the engine dead and with the assumption that the angle of attack remains constant. Thus we arrive at a simple result, which can be rendered practically utilizable for determining the trajectory of an airplane descending at a constant steering angle.

An airship model made by the Goodyear Rubber Company was filled with water and suspended from a beam. The deformations of the envelope were studied under the following conditions: 1) both ballonets empty; 2) forward ballonets filled with air; 3) rear ballonets filled with air; and 4) both ballonets filled with air. Photographs were taken to record the deflections under each of these conditions, and a study was made to determine the minimum head of water necessary to maintain the longitudinal axis of the envelope under these conditions. It was concluded that any pressure sufficient to keep the airship full may be used. It appears that a pressure of one inch of water would provide a suitable factor of safety, and therefore it is the pressure that is recommended.

Different maps and scales are discussed with particular emphasis on their use in aviation. The author makes the observation that current navigation methods are slow and dangerous and should be replaced by scientific methods of navigation based on loxodromy and the use of the compass.

Thus far, all attempts at the quantitative determination of drag, on the basis of the theory of viscous fluids, have met with but slight success. For this reason, whenever a more accurate knowledge of the drag is desirable, it must be determined by experiment. Here, a few experimental results are given on the drag of a cylinder exposed to a stream of air at right angles to its axis. It is shown that the drag depends on the absolute dimensions of the body and the velocity and viscosity of the fluid in a much more complex manner than has heretofore been supposed.

This report provides a list of landing locations for seaplanes on the Atlantic coast of the United States and the facilities and services located there.

The future of aerial photography is examined with special reference to corporate uses.

The organization of a meteorological service for an air route involves the solution of two distinct problems: distribution and grouping of meteorological stations and communications. Experience gained in the establishment of two lines, Paris-Warsaw and Constantinople-Bucharest enables us to establish certain principles, which may be of interest to note here.

At the request of the N.A.C.A. the "Universal Propeller" was operated and explained by the inventor, Mr. Spencer Heath, for the purpose of demonstrating the following features of design: 1) Elimination of continuously running gears, collars or bearings in the pitch control mechanism; 2) The use of engine power in place of manual labor in changing blade angle; 3) The absence of any structural limitation to the range of blade angles available and the possibility of limiting the blade travel between any two predetermined extreme positions; 4) Continuous indication on the instrument board of the blade position; 5) Automatic throttling of the engine while the propeller is passing through the position of neutral pitch.

It is shown by the author's experiments that hydrogen which escapes to the atmosphere through openings in the system may burn spontaneously if it contains dust. Purely thermal reasoning can not account for the combustion. It seems to be rather an electrical ignition. In order to determine whether the cause of the spontaneous ignition was thermo-chemical, thermo-mechanical, or thermo-electrical, the experiments in this paper were performed.