"Contact conductances for three semi-smooth and rough stainless steel contacts involving six steels are determined. The procedure and equipment used are fully described, and the results are given. Graphs display thermal conductance and conductivity versus pressure and temperature."

Breakaway corrosion of Be in moist CO2 can be avoided if the Be is fabricated using preoxidized powder. The powder is preoxidized by heating in dry O/sub 2/. Preoxidation of Be powder was measured as a function of temperature and time of heating in O/sub 2/. The subsequent reactions of the preoxidized powder in moist CO/sub 2/ at 700 deg C were studied and the effect of increasing amounts of added oxide was measured. A model is proposed to explain the inhibition of corrosion by added oxide. (auth)

This report supersedes ORNL CF-57-2-1, which was an extension and revision of ORNL CF-54-6-72. Details concerning a recommended system of flow-plan symbols and drawing are given. The system is designed to identify the function of all major instrument components and to show schematically the operation of the instrument relative to the particular process. The system is used for identification and designation. The system is a modification of the Instrument Society of American Recommended Practice (RP 5.1).

A survey of the aqueous coordination chemistry of beryllium is given. The possible use of coordination chemistry in the separation of beryllium from fission products is discussed, outlining methods for separation processes.

The validity of the nuclear track emulsion technique for fast-neutron dosimetry is examined in the exposure of a human phantom to PuBe neutrons, Semiautomatic track scanning and high-speed data analysis obviate the major disadvantages of emulsion dosimetry, and allow the absolute differential proton track energy spectrum at various locations in the phantom to be obtained without a serious cost in time. From this are calculated the total absorbed local tissue dose due to proton recoils and the local thermal neutron intensity during irradiation.

The designer's concept of a test program for the 30-Mw prototype intermediate heat exchanger and steam generator designed and fabricated as part of the Sodium Components Development Program is presented. The performance data will serve to verify the thermal design, or allow application of improved techniques to future designs, give an improved basis for stress analysis in design of future units, and demonstrate the capability and limitations of the units in relation to the performance specifications for which they were designed. Welding techniques for type 316 stainless steel are described. The specifications and operating conditions of the units are given along with instrumentation drawings showing test equipment design and arrangement.

A comparison of methods of capital cost estimation used for nuclear fuel reprocessing plants shows that, because of the special nature and complexity of such plants, cost estimation methods for conventional chemical plants involving the use of cost factors are not applicable and will give low estimates. Cost factors which are available from other countries where reprocessing plants are installed should be used with caution since those factors apply only for the particular design philosophy used and pertain to industrial conditions which are different in this county. Capital cost estimation methods involving direct take-offs from detailed design drawings are necessary to obtain reliable estimates. The methods of estimating operating costs for nuclear reprocessing and conventional chemical plants are similar.

A technique is presented for liquid ammonia leaching of metallic sodium from corrosion coupons, filter elements, and sodium samples to reveal contaminants and impurities.

The raw materials and fabrication procedures employed in preparing thirty two zirconium alloy compositions for evaluation as described in GEAP-3979 are reported. Considerations involved in the extension of reported laboratory procedures to larger scale production are discussed.

This paper considers the duty of the physician to provide comfort and care for cancer patients and suggests four tenants for physicians to follow to assist with this: 1) No matter what the patient's condition, the physician shall be always available, even if only to listen and talk. 2) In spite of the ravages of cancer, the patient lives with it. 3.) The patient is an adult under guarantees of the constitution. and 4) The physician will always communicate with the patient. The paper ends with a discussion of the objectives for management of cancer patients.

From abstract: "The adsorption of ethane, ethylene and acetylene on clean iridium in a field emission microscope has been found to cause characteristic changes in the work function of the iridium surface. Further changes, which are time and temperature dependent, result when such surfaces are heated. Flash filament experiments have shown that the changes in work function upon heating are due to desorption reactions and that the desorbed product consists principally of hydrogen. By assuming a linear relationship between surface coverage and work function, it has been possible to determine the desorption kinetics from the observed rates of work function change at various temperatures. The results are consistent with a mechanism involving stepwise surface dehydrogenation in which a pair of hydrogen atoms is removed from the hydrocarbon molecule in each step, followed by desoption of the adsorbed hydrogen. At very high temperatures the remaining carbon atoms are removed, presumably by evaporation."

Technical report outlining the nature and effects of energy loss and radiation in biological materials during radiobiological processes.

Technical report describing a bubble chamber film track measuring stage designed for maximum versatility that was build at Brookhaven National Laboratory. The report includes photographs and diagrams of the device.

Technical report describing "A means for automatically determining the coordinates of a point at the center of a bubble chamber track." from the abstract.

This preliminary Hazards Summary Report presents to the Atomic Energy Commission (AEC), Division of Licensing and Regulation, a description of the Nuclear Development Center, the characteristics of the proposed site, and an evaluation of the potential hazards associated with operating the test reactor at this location.

A computer program which optimizes the locations and strengths of magnets in a beam transport system has been written for the IBM 704 and 7090 computers Programs have been previously written which trace a ray through a system of magnets and determine its focusing properties When using such a program, one examines the characteristics of the emergent beam and then varies the parameters of the system manually to optimize it In the program which will now be described, the computer itself performs the examination and varies the parameters.

Preliminary results are presented on hyperon-anti-hyperon production in proton-anti-proton collisions at 3.25 Bev/c. The exposure consisted of approximately 40,000 pictures taken in the Brookhaven National Laboratory 20" liquid hydrogen bubble chamber. The anti-proton beam was extracted from the A.G.S. and electro-statically separated. An average of approximately 15 anti-protons per picture was obtained at this momentum with an estimated beam contamination of less than 10K. The beam momentum was determined from kinematical analysis of a large sample of events. The scanning and measuring of the film has been done both at Yale and at Brookhaven, as well as the analysis of the data. A combination of the data from both laboratories is presented.

During 1961 and 1962, a separated beam was designed and installed at the AGS for use with the 20 inch hydrogen bubble chamber. The beam utilizes electromagnetic velocity spectrometers in two stages of separation. Since the fall of 1962, the bubble chamber has taken 600,000 pictures containing antiprotons, K± mesons, and π± mesons as beam tracks. This paper concerns the use of the separated beam for antiprotons and π⁺ mesons.

This technical report discusses the synthesis of vic-dioximes, the analysis of vic-dioximes, the structure of vic-dioximes, the structure of metal(II)-vic-dioxime complexes, and analytical applications of this research. The report includes tables and figures that accompany the report's contents and findings.

This technical report discusses processes to study the stability constants and intrinsic solubility of several Nickel(II)-vic-Dioxime complexes.

"Mixed Fission Products (MFP) for use as a heat source for thermoelectric generators will become increasingly available in the coming years. The Atomic Energy Commission sponsored program on solidification of nuclear wastes is now entering the hot-bench scale test phase. During this phase approximately 5000 thermal watts of two year old MFP could be produced monthly. Two different types of hot calcination pilot plants are planned for installation at the Hanford National Laboratories in the 1964 to 1966 time period. Each of these plants should be able to produce 160,000 thermal watts of two year MFP and 16,000 thermal watts of ten year MFP on a monthly basis. A full scale plant for a 15,000 Mw(e) nuclear economy is estimated to produce four to five times as much MFP as either of the pilot plants. Costs will be dependent upon AEC policy in effect at the time the plant is operating."

An investigation was made of Cosmotron intensity versus time through the entire time interval from the beginning of injection to the completion of r-f capture. The induction electrode signal was used for the instantaneous measurement of beam intensity. Oscilloscope displays of the signal were photographed and traced. Base lines were filled in on the tracings and the area of the pulses measured with a polar planimeter. It was found that the relation losses of beam intensity increase with injection intensity (total injected charge), and that most of the losses take place in the time interval between the end of injection and the completion of the first synchrotron oscillation

Technical report. From Abstract : "The scandium-yttrium and scandium-zirconium were studied by thermal and x-ray methods. Both systems are characterized by complete solid solubility in the low temperature hexagonal form and in the high temperature bcc form. In the Sc-Y system, there is a minimum in the solidus at 50 at. pct and 1365°C, while the solidus in the Sc-Zr system follows a nearly straight line relationship between the melting point of scandium and zirconium. There is a minimum in the temperature of transition from hexagonal to bcc in the Sc-Y system at 43 at. pct Y and 1175°C; while the temperature of transition is raised in the Sc-Zr system to a maximum of 1415°C at 30 at. pct Zr."

From abstract: "The self-diffusion coefficient of yttrium in yttrium oxide has been determined for polycrystalline Y2O3 in the temperature range 1400 to 1800°C. Radioactive Y-91 was deposited on sintered specimens of 94 to 97% theoretical density. The specimens were annealed under vacuum and sectioned. The following equation describes the temperature dependence of the diffusion coefficient over the range studied: D = 2.41 x 10[^]-4 exp (-43,900/RT) cm[^]2/sec."