A handbook of mathematical functions that is designed to provide scientific investigations with a comprehensive and self-contained summary of the mathematical functions that arise in physical and engineering problems.

Report issued by the Bureau of Mines over a study on "stress determinations in an area known to be under high stress concentration induced by prior mining operations" (p. 2). The geology, procedures, and instrumentation are discussed. This report includes tables, illustrations, and photographs.

From Abstract: "Primary interest was placed on the scale formation problem. Significant improvements were made in the process and described in this report. Maintenance requirements were unusually high during the year, primarily as a result of cumulative corrosion damage over the last three years. The most significant damage was in the circulating pumps, the heat exchangers and feed piping. These and other failures are described."

From summary: Site investigations were conducted at two locations, the sites of the DUGOUT and CHARLIE events, at the Nevada Test Site for the purpose of evaluating the dynamic in situ technique as a means of determining the boundaries of craters produced by explosive detonations.

This report summarizes the geological analyses of one of the preliminary cross sections from the Pahute Mesa in the Nevada Test Site, particularly the uppermost Precambrian-Paleozoic strata.

Report discussing microwave attenuation measurement methods and standards. In addition, a relatively new and more precise way of representing and analyzing an attenuation measurement is presented. This in turn permits more rigorous definitions and error analyses than were previously possible. The referral of microwave attenuation measurements to standards operating at lower frequencies is discussed with particular attention to the errors in the referral processes as well as the errors in the standards themselves. Desirable characteristics are listed for attenuators which are suitable for calibration. Measurement methods are classified and described. Comments are made on the accuracy and convenience of various methods, and references are given which cover most of the basic and important research in this field. Key words: Microwave, attenuation, measurements, standards, tutorial.

Report describing the application of conventional cost experience to physical features of source of supply, treatment, pumping, transmission, distribution, and storage for community water supply sources. Some costs due to readily removable water quality characteristics like suspended solids, color, taste, and order are measurable, as are other conventional costs of operation and maintenance. Other costs related to an excess of dissolved solids, however, tend to be unknown and are the subject of this study.

Report issued by the Oak Ridge National Laboratory discussing annual progress made by the Instrumentation and Controls Division during 1966. Descriptions of progress and studies conducted are presented. This report includes tables, illustrations, and photographs.

From introduction: "This report has been prepared in conjunction with the Liquid Metal Fast Breeder Reactor (LMFBR) Follow-On Study. It is the Concept I description of Task I as outlined by Argonne National Laboratory (ANL) in Appendix C of their Follow-On Study Program."

Report discussing the selection, specifications, and use of signal-light colors. It discusses the nature of the problem, and the mathematical representation, recognition, production, control, and use of such colors. The characteristics of different types of chromaticity boundaries and the purpose and effect of the requirement for similarity of chromaticity characteristics are given special consideration. The treatment is varied according to the intended use. The discussion of the control of colors and the section on the use of colors are nontechnical, whereas the section on the production of signal colors is designed for the colorimetrist who is faced with the problem of selecting limit filters or drafting a specification.

From Abstract: "The bibliography, a supplement to NBS Monograph 35, of the same title, covers the years 1960 to 1965, inclusive, and include 109 references for prior years not listed in Monograph 35. It contains 1787 references, 38 of which are to books. The references, besides those directly concerned with pressure measurement, include those on vacuum technology which may bear on the technique of vacuum measurement, such as on adsorption and desorption, diffusion of gases into solids, gas conductance and hardware such as pumps, seals and traps."

Report issued by the Argonne National Laboratory discussing a computer program used for fast reactor safety experiments. As stated in the summary, "this report gives a detailed description of a hybrid-computer program for calculating temperatures in a multi-region, axisymmetric, cylindrical configuration consisting of solid materials bounded by flowing coolant. Included is an explanation of the mathematical methods, together with a discussion of special features, input-output descriptions, and several sample problems" (p. 7). This report includes tables, and illustrations.

The report is about the geophysical year oceanographic program of the Argentine Republic.

Analysis of geologic, hydrologic, and geophysical data obtained in and around Yellow Creek core hole No. 1, Rio Blanco County, Colorado, indicate a 1,615-foot section of oil shale was penetrated by the hole. Geophysical log data indicate the presence of 25 gallons per ton shale for a thickness of 500 feet may be marginal. The richest section of oil shale is indicated to be centered around a depth of 2,260 feet. Within the oil shale the interval 1,182 to 1,737 feet is indicated to be relatively structurally incompetent and probably permeable. Extension of available regional hydrologic data indicate the oil shale section is probably water bearing and may yield as much as 1,000 gallons per minute. Hydrologic testing in the hole is recommended.

This report summarizes results on surveys taken by the U.S. Geological Survey made to determine the seismic velocity, electrical resistivity, and preliminary geology of rock in the U12n.03 tunnel, Nevada Test Site.

This report summarizes the results of the U.S. Geological Survey geophysical and geological studies of the rock in the U16a.04 tunnel in the Nevada Test Site.

The following report summarizes the geological and geophysical studies made on the rocks of the Midi Mist site in the Area-12 tunnel complex of the Nevada Test Site. The data was needed to determine whether the rock met the technical criteria of the nuclear experiment.

The following report summarizes the geophysical studies of the rocks made in the U12e.10 tunnel of the Nevada Test Site.

From Abstract: "A calibration is applied to the intensity measurements of the 1400 lines below 2450 A in the NBS Tables of Spectral-Line Intensities. Tables of the new values are presented with the lines arranged by elements and by wavelengths."

Major psychological findings and data in the field of the legibility of alphanumeric characters and other symbols.

A report summarizing the geology of Crooks Gap, Fremont County, Wyoming, as related to Uranium Resources

Abstract: "The Midi Mist (U12n.02) event produced rock spalling along bedding, joint, and fault planes in the U12n.02 and U12n.03 drifts. The spalling in the U12n.02 drift started at about construction station 12 + 75 and was continuous toward the W.P. Most of the spalling in the U12n.03 drift occurred between C.S. 0 + 00 and 7 + 00."

Report issued by the Office of Saline Water over studies conducted on the desulfating process at desalination plants. As stated in the introduction, "the explicit purpose of this study is to determine whether or not application of the feed-water desulfating process to the feed to a desalting plant will reduce the overall cost of desalted water" (p. 1). This report includes tables, and illustrations.

"The surficial deposits of Yucca Flat, divided into eleven units, are shown at a scale of 1:48,000 (fig. 1A). Major rock types of the bordering bedrock areas are indicated, as are the lithologies of portions of the surficial units. The map explanation (fig. 1B) includes a description of the surficial units." (page 2)