From Summary: "A preliminary investigation of the stalling processes of four typical airfoil sections was made over the critical range of the Reynolds Number. Motion pictures were taken of the movements of small silk tufts on the airfoil surface as the angle of attack increased through a range of angles including the stall. The boundary-layer flow also at certain angles of attack was indicated by the patterns formed by a suspension of lampblack in oil brushed onto the airfoil surface. These observations were analyzed together with corresponding force-test measurements to derive a picture of the stalling processes of airfoils."

"The theory of turbulence reached its full growth at the end of the 19th century as a result of the work by Boussinesq and Reynolds. It then underwent a long period of stagnation which ended under the impulse given to it by the development of wind tunnels caused by the needs of aviation. Numerous researchers, attempted to put Reynolds' elementary statistical theory into a more precise form. During the war, some isolated scientists - von Weizsacker and Heisenberg in Germany, Kolmogoroff in Russia, Onsager in the U.S.A. - started a program of research. By a system of assumptions which make it possible to approach the structure of turbulence in well-defined limiting conditions quantitatively, they obtained a certain number of laws on the correlations and the spectrum. Since the late reports have improved the mathematical language of turbulence, it was deemed advisable to start with a detailed account of the mathematical methods applicable to turbulence, inspired at first by the work of the French school, above all for the basic principles, then the work of the foreigners, above all for the theory of the spectrum" (p. 1).

Report presenting a flight investigation to determine the contributions of wing, tail, and fuselage to the total airplane lift of a propeller-driven fighter-type airplane. The tests occurred over a range of Mach numbers. The loads on the various airplane components were measured by the use of calibrated strain-gage installations located at the roots of the wings and horizontal tail surfaces.

From Summary: "An analysis is given of the oscillating motion of a ballistic missile which upon entering the atmosphere is angularly misaligned with respect to the flight path. The history of the motion for some example missiles is discussed from the point of view of the effect of the motion on the aerodynamic heating and loading. The miss distance at the target due to misalignment and to small accidental trim angles is treated. The stability problem is also discussed for the case where the missile is tumbling prior to atmospheric entry."

A simplified analysis of the velocity and deceleration history of missiles entering the earth's atmosphere at high supersonic speeds is presented. The results of this motion analysis are employed to indicate means available to the designer for minimizing aerodynamic heating. The heating problem considered involves not only the total heat transferred to a missile by convection, but also the maximum average and local time rates of convective heat transfer.

The heat of combustion of the product formed by the reaction acetylene and diborane was found to be 20,100 +/- 100 Btu per pound for the reaction of liquid fuel to gaseous carbon dioxide, gaseous water, and solid boric oxide. The measurements were made in a Parr oxygen-bomb calorimeter, and chemical analyses both of the sample and of the combustion products indicated combustion in the bomb calorimeter to have been 97 percent complete. The estimated net heat of combustion for complete combustion would therefore be 20,700 +/- 100 Btu per pound.

Report presenting a comparison of fixed-geometry, translating-spike, and bypass-inlets on the basis of turbojet- and ramjet-engine performance. Results regarding a comparison of the experimental data and its application to ramjet and turbojet engines are provided.

Report discussing the knock-limited performance of blends of triptane and 28-R fuel in an F-4 engine at three sets of conditions and three compression ratios. The knock limits of the triptane blends were more sensitive to compression ratio than the 28-R fuel, and the sensitivities of the blends increased as the severity of other engine conditions increased.

Hitherto, definite specifications have always been made for fuel oils and they have been classified as more or less good or non-utilizable. The present aim, however, is to build Diesel engines capable of using even the poorest liquid fuels and especially the waste products of the oil industry, without special chemical or physical preparation.

Memorandum presenting the calculation of the heats of formation and combustion for liquid and gaseous alkyl- and silyl-substituted boron compounds by a semitheoretical method. The results indicated that alkylation and more especially silylation reduce the heat of combustion. Results regarding alkyl- and silyldecaboranes, diborylmethane, diborylethane, and their alkyl derivatives, bipentaboranyl and bideocaboranyl, dipentaboranyl- and didecaboranylalkanes, and heats of combustion of isomers are provided.

A theoretical analysis of helicopter maneuver stability is made and the results are compared with experimental results for both a single and a tandem rotor helicopter. Techniques are described for measuring in flight the significant stability derivatives for use with the theory to aid in design studies of means for achieving marginal maneuver stability for a prototype helicopter.

Report presenting calculations and flight-test measurements on a single-main-rotor helicopter indicate that the damping moment about the helicopter center of gravity produced during pitching or rolling by a rotor which has flapping hinges on the rotor shaft, which depends primarily on four quantities: rotor speed, blade mass factor, height of the rotor hub above the helicopter center of gravity, and the ratio of collective pitch to the thrust coefficient - solidity ratio.

"Theoretically derived charts and equations are presented by which tail-rotor design studies of directional trim and control response at low forward speed can be conveniently made. The charts can also be used to obtain the main-rotor stability derivatives of thrust with respect to collective pitch and angle of attack at low forward speeds. The use of the charts and equations for tail-rotor design studies is illustrated. Comparisons between theoretical and experimental results are presented. The charts indicate, and flight tests confirm, that the region of vortex roughness which is familiar for the main rotor is also encountered by the tail rotor and that prolonged operation at the corresponding flight conditions would be difficult" (p. 1).

Report presenting an investigation to determine the aerodynamic characteristics in sideslip of a triangular wing of aspect ratio 2.04 in combination with a body of fineness ratio 12.5 and a vertical tail surface. The body combined with the triangular plan-form wing caused no significant changes in the lift characteristics of the wing and only a 1-percent decrease in the static margin. Results regarding the longitudinal characteristics, lateral and directional characteristics, and estimation of tail and rudder effectiveness are provided.

"A solution is presented for the coupled modes and frequencies of swept wings mounted on a fuselage. The energy method is used in conjunction with power series to obtain the characteristic equations for both symmetrical and asymmetrical vibration. A numerical example which is susceptible to exact solution is presented, and the results for the exact solution and the solution presented in this paper show excellent agreement" (p. 1).

Memorandum presenting flight tests conducted on two straight-wing jet airplanes of generally similar configuration, one exhibiting a diving tendency and the other a climbing tendency, in order to investigate the cause for the particular type of behavior of each airplane at high Mach numbers. The results showed that the diving tendency experienced by the one airplane was due to the predominant effect of an increased angle of attack of the horizontal tail.

"This report contains the flight-test results of the lateral and directional-stability and control phase (including tests with wing-tip tanks) of a general flying-qualities investigation of the Lockheed P-80A airplane (Army No. 44-85099). These tests were conducted at indicated airspeeds up to 494 miles per hour (0.691 Mach number) at low altitude and up to 378 miles per hour (0.816 Mach number) at high altitude. These tests showed that the flying qualities of the airplane were for the most part in accordance with the requirements of the Army Air Forces Stability and Control Specifications" (p. 1).

Report presenting tests to determine the flight characteristics of an F-86 airplane equipped with a blowing-type boundary-layer-control installation on the trailing-edge flaps. The effectiveness of the flap was determined in conjunction with slatted leading edges and an inflatable rubber boot on the leading edge. Measurements were made of lift, drag, flow requirements, and computations for take-off, climb, and landing.

Report presenting three experimental investigation conducted with 75-millimeter-bore cylindrical roller bearings to determine the effects of roller axial clearance ratio, cage diametral clearance ratio, and cage land width-diameter ratio on bearing operating temperatures, wear, cage slip, and high-speed operating characteristics.

Report presenting an investigation to determine the performance of large tailless and conventional airplanes. The primary conclusion drawn fro the testing is that large all-wing tailless airplanes may have better performance characteristics than their equivalent tail-boom airplanes for certain types of missions. Results regarding a general performance comparison, performance variations with structural weight, landing speed, and take-off distance, and performance comparison based on arbitrary design specification are provided.

Flight tests were conducted between Mach numbers of 0.9 and 1.8 over a Reynolds number range of 9(exp 6) to 30(exp 6) to determine the zero-lift drag and some rolling-effectiveness characteristics of the Northrop MX -775B missile with small and large body. The MX-775B is a proposed long range, supersonic, ground-to-ground missile having an arrow wing with 67.5 degree leading-edge sweep, 15 deg trailing-edge sweep, and a modified NACA 0004 airfoil section. The configuration has no horizontal tail but has wing trailing-edge elevons which serve a dual purpose as elevators and ailerons. The ratio of body frontal area to wing plan-form area is 0.0127 for the small-body configuration and 0.0330 for the large-body configuration.

Report presenting an altitude-chamber investigation to determine the altitude performance characteristics of the British Rolls-Royce Nene II turbojet engine with an 18.41-inch-diameter jet nozzles. Testing occurred at a range of simulated altitudes and ram-pressure ratios. Results regarding the simulated flight performance, generalized performance, and effect of jet-nozzle area on performance are provided.

The altitude-ignition limits of a condenser-discharge ignition system installed on a turbojet engine were determined at a flight Mach number of 0.6 using 1.1-pound Reid vapor pressure fuel. Ignition was possible up to an altitude of 55,000 feet with 4.8 joules per spark and 6 sparks per second.

Report presenting a study of the altitude-starting limits of a production turbojet engine with an axial-flow compressor and a multiple through-flow combustor. The ignition limits, flame-propagation limits, and acceleration limits of the engine were improved to increase the starting limits to relatively high altitude.