A heavy Standard Model Higgs boson is not only disfavored by electroweak precision observables but is also excluded by direct searches at the 7 TeV LHC for a wide range of masses. Here, we examine scenarios where a heavy Higgs boson can be made consistent with both the indirect constraints and the direct null searches by adding only one new particle beyond the Standard Model. This new particle should be a weak multiplet in order to have additional contributions to the oblique parameters. If it is a color singlet, we find that a heavy Higgs with an intermediate mass of 200-300 GeV can decay into the new states, suppressing the branching ratios for the standard model modes, and thus hiding a heavy Higgs at the LHC. If the new particle is also charged under QCD, the Higgs production cross section from gluon fusion can be reduced significantly due to the new colored particle one-loop contribution. Current collider constraints on the new particles allow for viable parameter space to exist in order to hide a heavy Higgs boson. We categorize the general signatures of these new particles, identify favored regions of their parameter space and point out that discovering or excluding …

None

None

Recently the new ENDF/B-VII.1 library was released; this completely replaces the earlier ENDF/B-VII.0 library. One of the first questions we ask about a new library is: What's Different? Here I attempt to at least partially answer this question. I present results in both tabulated form (so you can quickly determine if any evaluations of interest to you have changed), and graphic form (so that you can see how much evaluations have changed and in what energy ranges). For the table I have compared what I refer to as the ENDF neutron data, namely MF=1 through 6. Here I did a character-by-character comparison of the same sections (MF/MT) that appear I both ENDF/B-VII.0 and VII.1; here I found differences in 170 evaluations. For the plots I have only compared the total cross sections for all evaluations that are common to both libraries, and I found that of the 423 evaluations in ENDF/B-VII.1, 120 of these have total cross sections that differ by 1% or more from the evaluation of the same isotope in ENDF/B-VII.0. This should be considered only a preliminary comparison; obviously there can be more subtle important differences that do not effect of total cross sections. Here I present …

Direct detection strategies are proposed for dark matter particles with MeV to GeV mass. In this largely unexplored mass range, dark matter scattering with electrons can cause single-electron ionization signals, which are detectable with current technology. Ultraviolet photons, individual ions, and heat are interesting alternative signals. Focusing on ionization, we calculate the expected dark matter scattering rates and estimate the sensitivity of possible experiments. Backgrounds that may be relevant are discussed. Theoretically interesting models can be probed with existing technologies, and may even be within reach using ongoing direct detection experiments. Significant improvements in sensitivity should be possible with dedicated experiments, opening up a window to new regions in dark matter parameter space.

This manual is a tool to provide information to all responders and emergency planners and is suggested as a starting point for all organizations that provide personnel/assets for radiological emergency response. It defines the safety requirements for the protection of all emergency responders. The intent is to comply with appropriate regulations or provide an equal level of protection when the situation makes it necessary to deviate. In the event a situation arises which is not addressed in the manual, an appropriate management-level expert will define alternate requirements based on the specifics of the emergency situation. This manual is not intended to pertain to the general public.

Scalla is a distributed low-latency file access system that incorporates novel techniques that minimize latency and maximize scalability over a large distributed system with a distributed namespace. Scalla's techniques have shown to be effective in nearly a decade of service for the high-energy physics community using commodity hardware and interconnects. We describe the two components used in Scalla that are instrumental in its ability to provide low-latency, fault-tolerant name resolution and load distribution, and enable its use as a high-throughput, low-latency communication layer in the Qserv system, the Large Synoptic Survey Telescope's (LSST's) prototype astronomical query system. Scalla arguably exceeded its three main design objectives: low latency, scaling, and recoverability. In retrospect, these objectives were met using a simple but effective design. Low latency was met by uniformly using linear or constant time algorithms in all high-use paths, avoiding locks whenever possible, and using compact data structures to maximize the memory caching efficiency. Scaling was achieved by architecting the system as a 64-ary tree. Nodes can be added easily and as the number of nodes increases, search performance increases at an exponential rate. Recoverability is inherent in that no permanent state information is maintained and whatever state information is needed …

A review of current commercially available, industrial-grade, low friction coatings will show that interfacial contact pressures nearing 1GPa ({approx}150ksi) inherently limit surface engineering solutions like WC, TiN, TiAlN, and so forth. Extremely hard coatings, then, are often pursued as the principle path, although they too are not without significant limitations. A majority of these compounds are inherently brittle in nature or may not pair well with their mating substrate. In either case, their durability in high contact stress environments is compromised. In parallel to thin film coatings, many conventional surface treatments do not yield an interface hard enough to withstand extreme stresses under load. New research into advanced, nanocomposite materials like (Ti, Zr)B2 shows great promise. Bulk compacts of this compound have demonstrated an order of magnitude better wear resistance than current offerings, notably materials like tungsten carbide. At a laboratory level, the (Ti,Zr)B2 nanocomposite material exhibited abrasive and erosive wear resistance nearly ten times better than existing mixed-phase boride systems. In ASTM abrasion and erosion testing, these new compositions exhibit wear resistance superior to other known advanced materials such as RocTec 500 and 'Borazon' cubic boron nitride. Many significant challenges exist for mass production of (Ti, Zr)B2, one of …

Results for the production of W-bosons in conjunction with up to three jets including parton shower corrections are presented and compared to recent LHC data. These results consistently incorporate the full next-to leading order QCD corrections through the MC{at}NLO method, as implemented in the SHERPA event generator, with the virtual corrections obtained from the BLACKHAT library.

Progress is reported on 20 different projects in a wide variety of areas ranging from nuclear chemistry and radiation detection to energy storage and renewable energy.

This work studies the performance and scalability characteristics of"hybrid'" parallel programming and execution as applied to raycasting volume rendering -- a staple visualization algorithm -- on a large, multi-core platform. Historically, the Message Passing Interface (MPI) has become the de-facto standard for parallel programming and execution on modern parallel systems. As the computing industry trends towards multi-core processors, with four- and six-core chips common today and 128-core chips coming soon, we wish to better understand how algorithmic and parallel programming choices impact performance and scalability on large, distributed-memory multi-core systems. Our findings indicate that the hybrid-parallel implementation, at levels of concurrency ranging from 1,728 to 216,000, performs better, uses a smaller absolute memory footprint, and consumes less communication bandwidth than the traditional, MPI-only implementation.

This is the final report for a university research project which advanced development of a new technology for identifying chemical reduction of hexavalent chromium contamination in groundwater systems. Reduction renders mobile and toxic hexavalent chromium immobile and less toxic. The new method uses stable isotope ratio measurements, which are made using multicollector ICP-mass spectrometry. The main objectives of this project were completed during the project period and two peer-reviewed articles were published to disseminate the information gained.

The current mission at H-Canyon involves the dissolution of an Alternate Feedstocks 2 (AFS-2) inventory that contains plutonium metal. Once dissolved, HB-Line is tasked with purifying the plutonium solution via anion exchange, precipitating the Pu as oxalate, and calcining to form plutonium oxide (PuO{sub 2}). The PuO{sub 2} will provide feed product for the Mixed Oxide (MOX) Fuel Fabrication Facility, and the anion exchange raffinate will be transferred to H-Canyon. The results presented in this report document the potential success of the RE resin column extraction application on highly concentrated Pu samples to meet MOX feed product specifications. The original 'Hearts Cut' sample required a 10000x dilution to limit instrument drift on the ICP-MS method. The instrument dilution factors improved to 125x and 250x for the sample raffinate and sample eluent, respectively. As noted in the introduction, the significantly lower dilutions help to drop the total MRL for the analyte. Although the spike recoveries were half of expected in the eluent for several key elements, they were between 94-98% after Nd tracer correction. It is seen that the lower ICD limit requirements for the rare earths are attainable because of less dilution. Especially important is the extremely low Ga limit …

The recent rapid progress in nanofabrication and experimental techniques made it possible to investigate a variety of meso-- and nano--scale systems, which were unavailable only a few years ago. Examples include fabrication of high-quality quantum wires in semiconductor heterostructures, of nanoscale hybrid superconductor--normal metal structures, and of a variety of novel (and much smaller) quantum dot and q-bit designs. These technological advances have led to formulation of a number of condensed matter theory problems which are equally important for applications and for the fundamental science. The present proposal aims at filling the exposed gaps in knowledge and at facilitating further development of experimental and theoretical physics of nanoscale structures. Specifically, the two PIs address the following issues: (i) The theory of interacting electrons in a quantum wire which accounts adequately for the non-linear dispersion relation of the electrons. The existing approaches rely on models with {\em linearized} electron spectrum, which fall short of addressing a growing list of experimentally relevant phenomena. (ii) Dynamics of hybrid normal--superconducting systems. A reliable treatment of dissipative phenomena in such structures is not developed as of yet, while rapid progress in fabrication makes finding the proper theoretical treatment methods highly desirable. (iii)~The fundamental limits on …

The regional-scale Weather Research and Forecasting (WRF) model is being used by a DOE Earth System Modeling (ESM) project titled “Improving the Characterization of Clouds, Aerosols and the Cryosphere in Climate Models” to evaluate the performance of atmospheric process modules that treat aerosols and aerosol radiative forcing in the Arctic. We are using a regional-scale modeling framework for three reasons: (1) It is easier to produce a useful comparison to observations with a high resolution model; (2) We can compare the behavior of the CAM parameterization suite with some of the more complex and computationally expensive parameterizations used in WRF; (3) we can explore the behavior of this parameterization suite at high resolution. Climate models like the Community Atmosphere Model version 5 (CAM5) being used within the Community Earth System Model (CESM) will not likely be run at mesoscale spatial resolutions (10–20 km) until 5–10 years from now. The performance of the current suite of physics modules in CAM5 at such resolutions is not known, and current computing resources do not permit high-resolution global simulations to be performed routinely. We are taking advantage of two tools recently developed under PNNL Laboratory Directed Research and Development (LDRD) projects for this activity. …

None

We perform amplitude analyses of the decays B{sup 0} {yields} K{sup +}K{sup -}K{sub s}{sup 0}, B{sup +} {yields} K{sup +}K{sup -}K{sup +}, and B{sup +} {yields}, and measure CP-violating parameters and partial branching fractions. The results are based on a data sample of approximately 470 x 10{sup 6} B{bar B} decays, collected with the BABAR detector at the PEP-II asymmetric-energy B factory at the SLAC National Accelerator Laboratory. For B{sup +} {yields} K{sup +}K{sup -}K{sup +}, we find a direct CP asymmetry in B{sup +} {yields} {phi}(1020)K{sup +} of A{sub CP} = (12.8 {+-} 4.4 {+-} 1.3)%, which differs from zero by 2.8{sigma}. For B{sup 0} {yields} K{sup +}K{sup -}K{sub s}{sup 0}, we measure the CP-violating phase {beta}{sub eff} ({phi}(1020)K{sub s}{sup 0}) = (21 {+-} 6 {+-} 2){sup o}. For B{sup +} {yields} K{sub s}{sup 0}K{sub s}{sup 0}K{sup +}, we measure an overall direct CP asymmetry of A{sub CP} = (4{sub -5}{sup +4} {+-} 2)%. We also perform an angular-moment analysis of the three channels, and determine that the f{sub X}(1500) state can be described well by the sum of the resonances f{sub 0}(1500), f{prime}{sub 2}(1525), and f{sub 0}(1710).

This thesis presents the first measurement of 6 hadronic event shapes in proton-proton collisions at a center-of-mass energy of {radical}s = 7 TeV using the ATLAS detector at the Large Hadron Collider. Results are presented at the particle-level, permitting comparisons to multiple Monte Carlo event generator tools. Numerous tools and techniques that enable detailed analysis of the hadronic final state at high luminosity are described. The approaches presented utilize the dual strengths of the ATLAS calorimeter and tracking systems to provide high resolution and robust measurements of the hadronic jets that constitute both a background and a signal throughout ATLAS physics analyses. The study of the hadronic final state is then extended to jet substructure, where the energy flow and topology within individual jets is studied at the detector level and techniques for estimating systematic uncertainties for such measurements are commissioned in the first data. These first substructure measurements in ATLAS include the jet mass and sub-jet multiplicity as well as those concerned with multi-body hadronic decays and color flow within jets. Finally, the first boosted hadronic object observed at the LHC - the decay of the top quark to a single jet - is presented.

Applications running on today's supercomputers tolerate failures by periodically saving their state in checkpoint files on stable storage, such as a parallel file system. Although this approach is simple, the overhead of writing the checkpoints can be prohibitive, especially for large-scale jobs. In this paper, we present initial results of an enhancement to our Scalable Checkpoint/Restart Library (SCR). We employ MRNet, a tree-based overlay network library, to transfer checkpoints from the compute nodes to the parallel file system asynchronously. This enhancement increases application efficiency by removing the need for an application to block while checkpoints are transferred to the parallel file system. We show that the integration of SCR with MRNet can reduce the time spent in I/O operations by as much as 15x. However, our experiments exposed new scalability issues with our initial implementation. We discuss the sources of the scalability problems and our plans to address them.

The Maintenance Plan for the Performance Assessments and Composite Analyses for the Area 3 and Area 5 Radioactive Waste Management Sites at the Nevada Test Site (National Security Technologies, LLC, 2007a) requires an annual review to assess the adequacy of the Performance Assessments (PAs) and Composite Analyses (CAs), with the results submitted annually to U.S. Department of Energy (DOE) Office of Environmental Management. The Disposal Authorization Statements for the Area 3 and Area 5 Radioactive Waste Management Sites (RWMSs) also require that such reviews be made and that secondary or minor unresolved issues be tracked and addressed as part of the maintenance plan (DOE, 1999a; 2000). The U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office performed an annual review of the Area 3 and Area 5 RWMS PAs and CAs for fiscal year (FY) 2011. This annual summary report presents data and conclusions from the FY 2011 review, and determines the adequacy of the PAs and CAs. Operational factors (e.g., waste forms and containers, facility design, and waste receipts), closure plans, monitoring results, and research and development (R and D) activities were reviewed to determine the adequacy of the PAs. Likewise, the environmental restoration activities at the …

The LLNL Detonation Science Project has a major interest in understanding the physics of detonation on a millimeter scale. This report summarizes the rate stick experiment results of two high explosives. The GO/NO-GO threshold between varying diameters of ultra-fine TATB (ufTATB) and LX-16 were recorded on an electronic streak camera and analyzed. This report summarizes the failure diameters of rate sticks for ufTATB and LX-16. Failure diameter for the ufTATB explosive, with densities at 1.80 g/cc, begin at 2.34 mm (not maintaining detonation velocity over the entire length of the rate stick). ufTATB rate sticks at the larger 3.18 mm diameter maintain a constant detonation velocity over the complete length. The PETN based and LLNL developed explosive, LX-16, with densities at 1.7 g/cc, shows detonation failure between 0.318 mm and 0.365 mm. Additional tests would be required to narrow this failure diameter further. Many of the tested rate sticks were machined using a femtosecond laser focused into a firing tank - in case of accidental detonation.

To date the vast majority of bacterial and archaeal genomes sequenced are of rather limited phylogenetic diversity as they were chosen based on their physiology and/ or medical importance. The Genomic Encyclopedia of Bacteria and Archaea (GEBA) project (Wu et al. 2009) is aimed to systematically filling the gaps of the tree of life with phylogenetically diverse reference genomes. However more than 99percent of microorganisms elude current culturing attempts, severely limiting the ability to recover complete or even partial genomes of these largely mysterious species. These limitations gave rise to the GEBA uncultured project. Here we propose to use single cell genomics to massively expand the Genomic Encyclopedia of Bacteria and Archaea by targeting 80 single cell representatives of uncultured candidate phyla which have no or very few cultured representatives. Generating these reference genomes of uncultured microbes will dramatically increase the discovery rate of novel protein families and biological functions, shed light on the numerous underrepresented phyla that likely play important roles in the environment, and will assist in improving the reconstruction of the evolutionary history of Bacteria and Archaea. Moreover, these data will improve our ability to interpret metagenomics sequence data from diverse environments, which will be of tremendous …

We present an experimental and numerical study of hydrodynamic and magnetohydrodynamic free shear layers and their stability. We first examine the experimental measurement of globally unstable hydrodynamic shear layers in the presence of rotation, and their range of instability. These are compared to numerical simulations, which are used to explain the modification of the shear layer and thus the critical Rossby number for stability. Magnetic fields are then applied to these scenarios, and globally unstable magnetohydrodynamic shear layers generated. These too are compared to numerical simulations, showing behavior consistent with the hydrodynamic case and previously reported measurements.

This document describes a systematic method to develop flow rate recommendations for Pump-and-Treat (P&T) extraction and injection wells in 100-KR-4 and 100-HR-3 Groundwater Operable Units (OU) of the Hanford Site. Flow rate recommendations are developed as part of ongoing performance monitoring and remedy optimization of the P&T interim actions to develop hydraulic contairnnent of the dissolved chromium plume in groundwater and protect the Columbia River from further discharges of groundwater from inland. This document details the methodology and data required to infer the influence of individual wells near the shoreline on hydraulic containment and river protection and develop flow rate recommendations to improve system performance and mitigate potential shortcomings of the system configuration in place.