Urbanization is reshaping China's economy, society, and energy system. Between 1990 and 2008 China added more than 300 million new urban residents, bringing the total urbanization rate to 46%. The ongoing population shift is spurring energy demand for new construction, as well as additional residential use with the replacement of rural biomass by urban commercial energy services. This project developed a modeling tool to quantify the full energy consequences of a particular form of urban residential development in order to identify energy- and carbon-efficient modes of neighborhood-level development and help mitigate resource and environmental implications of swelling cities. LBNL developed an integrated modeling tool that combines process-based lifecycle assessment with agent-based building operational energy use, personal transport, and consumption modeling. The lifecycle assessment approach was used to quantify energy and carbon emissions embodied in building materials production, construction, maintenance, and demolition. To provide more comprehensive analysis, LBNL developed an agent-based model as described below. The model was applied to LuJing, a residential development in Jinan, Shandong Province, to provide a case study and model proof of concept. This study produced results data that are unique by virtue of their scale, scope and type. Whereas most existing literature focuses on building-, …

We developed a mathematical method to analyze flow cytometry data to describe the kinetics of {gamma}H2AX and pATF2 phosphorylations ensuing various qualities of low dose radiation in normal human fibroblast cells. Previously reported flow cytometry kinetic results for these DSB repair phospho-proteins revealed that distributions of intensity were highly skewed, severely limiting the detection of differences in the very low dose range. Distributional analysis reveals significant differences between control and low dose samples when distributions are compared using the Kolmogorov-Smirnov test. Radiation quality differences are found in the distribution shapes and when a nonlinear model is used to relate dose and time to the decay of the mean ratio of phosphoprotein intensities of irradiated samples to controls. We analyzed cell cycle phase and radiation quality dependent characteristic repair times and residual phospho-protein levels with these methods. Characteristic repair times for {gamma}H2AX were higher following Fe nuclei as compared to X-rays in G1 cells (4.5 {+-} 0.46 h vs 3.26 {+-} 0.76 h, respectively), and in S/G2 cells (5.51 {+-} 2.94 h vs 2.87 {+-} 0.45 h, respectively). The RBE in G1 cells for Fe nuclei relative to X-rays for {gamma}H2AX was 2.05 {+-} 0.61 and 5.02 {+-} 3.47, at 2 …

The Used Fuel Disposition (UFD) Campaign within DOE-NE is evaluating storage and disposal options for a range of waste forms and a range of geologic environments. To assess the potential performance of conceptual repository designs for the combinations of waste form and geologic environment, a master set of Features, Events, and Processes (FEPs) has been developed and evaluated. These FEPs are based on prior lists developed by the Yucca Mountain Project (YMP) and the international repository community. The objective of the UFD FEPs activity is to identify and categorize FEPs that are important to disposal system performance for a variety of disposal alternatives (i.e., combinations of waste forms, disposal concepts, and geologic environments). FEP analysis provides guidance for the identification of (1) important considerations in disposal system design, and (2) gaps in the technical bases. The UFD FEPs also support the development of performance assessment (PA) models to evaluate the long-term performance of waste forms in the engineered and geologic environments of candidate disposal system alternatives. For the UFD FEP development, five waste form groups and seven geologic settings are being considered. A total of 208 FEPs have been identified, categorized by the physical components of the waste disposal system …

The Used Fuel Disposition (UFD) Campaign within DOE-NE is evaluating storage and disposal options for a range of waste forms and a range of geologic environments. For each waste form and geologic environment combination, there are multiple options for repository conceptual design. The Disposal Systems Evaluation Framework (DSEF) is being developed to formalize the development and documentation of options for each waste form and environment combination. The DSEF is being implemented in two parts. One part is an Excel workbook with multiple sheets. This workbook is designed to be user friendly, such that anyone within the UFD Campaign can use it as a guide to develop and document repository conceptual designs that respect thermal, geometric, and other constraints. The other part is an Access relational database file that will be centrally maintained to document the ensemble of conceptual designs developed with individual implementations of the Excel workbook. The DSEF Excel workbook includes sheets for waste form, environment, geometric constraints, engineered barrier system (EBS) design, thermal, performance assessment (PA), materials, cost, and fuel cycle system impacts. Each of these sheets guides the user through the process of developing internally consistent design options, and documenting the thought process. The sheets interact with …

Recently a Resistive Magnetohydrodynamics (MHD) package has been added to the KULL code. In order to be compatible with the underlying hydrodynamics algorithm, a new sub-zonal magnetics discretization was developed that supports arbitrary polygonal and polyhedral zones. This flexibility comes at the cost of many more unknowns per zone - approximately ten times more for a hexahedral mesh. We can eliminate some (or all, depending on the dimensionality) of the extra unknowns from the global matrix during assembly by using a Schur complement approach. This trades expensive global work for cache-friendly local work, while still allowing solution for the full system. Significant improvements in the solution time are observed for several test problems.

This is an assessment report on the population of marine mammals along the U.S. Pacific coastline. These reports are ever-growing and subject to change annually.

The last unknown neutrino mixing angle theta_13 is one of the fundamental parameters of nature; it is also a crucial parameter for determining the sensitivity of future long-baseline experiments aimed to study CP violation in the neutrino sector. Daya Bay is a reactor neutrino oscillation experiment designed to achieve a sensitivity on the value of sin^2(2*theta_13) to better than 0.01 at 90percent CL. The experiment consists of multiple identical detectors placed underground at different baselines to minimize systematic errors and suppress cosmogenic backgrounds. With the baseline design, the expected anti-neutrino signal at the far site is about 360 events per day and at each of the near sites is about 1500 events per day. An overview and current status of the experiment will be presented.

This report is designed to assist Members of Congress as they consider the costs and benefits of the U.S.-South Korean Free Trade Agreement (KORUS FTA.) It examines the provisions of the KORUS FTA in the context of the overall U.S.-South Korean economic relationship, U.S. objectives, and South Korean objectives.

This report discusses the financial assistance for constructing municipal sewage treatment plants and certain other types of water quality improvement projects. It also points out Titles II and VI ---Municipal Wastewater Treatment Construction.

The Marine Protection, Research, and Sanctuaries Act has two basic aims: to regulate intentional ocean disposal of materials, and to authorize related research. Permit and enforcement provisions of the law are often referred to as the Ocean Dumping Act. The basic provisions of the act have remained virtually unchanged since 1972, when it was enacted to establish a comprehensive waste management system to regulate disposal or dumping of all materials into marine waters that are within U.S. jurisdiction, although a number of new authorities have been added. This report presents a summary of the law.

This report examines recent congressional interest in the security of wastewater utilities, and whether or not to include water utilities in chemical plant security regulations implemented by Department of Homeland Security. Damage to or destruction of the nation's water supply and water quality infrastructure by terrorist attack or natural disaster could disrupt the delivery of vital human services in this country, threatening public health and the environment, or possibly causing loss of life. Interest in such problems has increased greatly since the September 11, 2001, terrorist attacks in the United States.

This report provides a brief overview and charts illustrating statistics about who would receive tax cuts, tax increases, or stay the same under the Senate version of the Tax Reform Bill.

Oak Ridge National Laboratory and A123 Systems, Inc. collaborated on this project to develop a better understanding, quality control procedures, and safety testing for A123 System’s nanocomposite separator (NCS) technology which is a cell based patented technology and separator. NCS demonstrated excellent performance. x3450 prismatic cells were shown to survive >8000 cycles (1C/2C rate) at room temperature with greater than 80% capacity retention with only NCS present as an alternative to conventional polyolefin. However, for a successful commercialization, the coating conditions required to provide consistent and reliable product had not been optimized and QC techniques for being able to remove defective material before incorporation into a cell had not been developed. The work outlined in this report addresses these latter two points. First, experiments were conducted to understand temperature profiles during the different drying stages of the NCS coating when applied to both anode and cathode. One of the more interesting discoveries of this study was the observation of the large temperature decrease experienced by the wet coating between the end of the infrared (IR) drying stage and the beginning of the exposure to the convection drying oven. This is not a desirable situation as the temperature gradient could have …

This report discusses the possibility of the new Congress and the new President to overturn agency final rules of the Obama Administration issued after early June 2016.

This report discusses the Historically Underutilized Business Zone Empowerment Contracting (HUBZone) program, which provides participating small businesses located in areas with low income, high poverty, or high unemployment with contracting opportunities in the form of set-asides, sole-source awards, and price-evaluation preferences. It provides information about the program and it's structure; outlines arguments for an against targeting assistance and the continuation of the program; analyzes the program's administration; and examines related legislation.

The objective of this program was to use a new media – videos posted on YouTube – to augment education about the emerging Smart Grid. All of the specific tasks have been completed per plan, with twelve videos and three podcasts posted on YouTube on the NEMA Vids4Grids channel.

The Department of Energy - Savannah River (DOE-SR) previously provided direction to Savannah River Remediation (SRR) to maintain fissile concentration in glass below 897 g/m{sup 3}. In support of the guidance, the Savannah River National Laboratory (SRNL) provided a technical basis and a supporting Microsoft{reg_sign} Excel{reg_sign} spreadsheet for the evaluation of fissile loading in Sludge Batch 5 glass based on the Fe concentration in glass as determined by the measurements from the Slurry Mix Evaporator (SME) acceptability analysis. SRR has since requested that SRNL provide the necessary information to allow SRR to update the Excel spreadsheet so that it may be used to maintain fissile concentration in glass below 897 g/m{sup 3} during the processing of Sludge Batch 6 (SB6). One of the primary inputs into the fissile loading spreadsheet includes a bounding density for SB6-based glasses. Based on the measured density data of select SB6 variability study glasses, SRNL recommends that SRR utilize the 99/99 Upper Tolerance Limit (UTL) density value at 38% WL (2.823 g/cm{sup 3}) as a bounding density for SB6 glasses to assess the fissile concentration in this glass system. That is, the 2.823 g/cm{sup 3} is recommended as a key (and fixed) input into the …

This report provides a comprehensive list of existing laws and pending legislation containing conditions, limitations, and reporting requirements for U.S. foreign assistance to Pakistan. It will track the debate on this topic and resulting changes.

The field of metamaterials is driven by fascinating and far-reaching theoretical visions, such as perfect lenses, invisibility cloaking, and enhanced optical nonlinearities. However, losses have become the major obstacle towards real world applications in the optical regime. Reducing the losses of optical metamaterials becomes necessary and extremely important. In this thesis, two approaches are taken to reduce the losses. One is to construct an indefinite medium. Indefinite media are materials where not all the principal components of the permittivity and permeability tensors have the same sign. They do not need the resonances to achieve negative permittivity, {var_epsilon}. So, the losses can be comparatively small. To obtain indefinite media, three-dimensional (3D) optical metallic nanowire media with different structures are designed. They are numerically demonstrated that they are homogeneous effective indefinite anisotropic media by showing that their dispersion relations are hyperbolic. Negative group refraction and pseudo focusing are observed. Another approach is to incorporate gain into metamaterial nanostructures. The nonlinearity of gain is included by a generic four-level atomic model. A computational scheme is presented, which allows for a self-consistent treatment of a dispersive metallic photonic metamaterial coupled to a gain material incorporated into the nanostructure using the finite-difference time-domain (FDTD) method. …

This report discusses the structure and role of the Federal Communications Commission (FCC) and recent legislation in the 115th Congress regarding the FCC.

The federal role in cybersecurity has been a topic of discussion and debate for over a decade. Despite significant legislative efforts in the 112th Congress on bills designed to improve the cybersecurity of U.S. critical infrastructure (CI), no legislation on that issue was enacted in that Congress. This report discusses the ramifications of Executive Order 13636, which issued in February 2013 was an attempt to enhance security and resiliency of CI through voluntary, collaborative efforts involving federal agencies and owners and operators of privately owned CI, as well as use of existing federal regulatory authorities.

Radiochemical analysis of post-shot debris inside the National Ignition Facility (NIF) target chamber can help determine various diagnostic parameters associated with the implosion efficiency of the fusion capsule. This capability is limited by the amount of target isotope that can be loaded inside the capsule ablator without affecting performance and the collection efficiency of the capsule debris after implosion. Prior to designing a collection system, the chemical nature and distribution of the debris inside the chamber must be determined and analysis methods developed. The focus of our current work has been on determining the elemental composition and distribution of debris on various blast shields and witness plates that were exposed to the chamber during ignition shots that occurred in 2009. These passive collection plates were used to develop both non-destructive and chemical analysis techniques to determine debris composition and melt depth at various shot energy profiles. A summary of these data will be presented along with our current strategy for the 2011 campaign.

5098-SR-05-0 PROJECT-SPECIFIC TYPE A VERIFICATION FOR THE HIGH FLUX BEAM REACTOR UNDERGROUND UTILITIES REMOVAL PHASE 3 TRENCH 1 BROOKHAVEN NATIONAL LABORATORY

Imaging x-ray crystal spectrometer #2;XCS#3; arrays are being developed as a US-ITER activity for Doppler measurement of Ti and v profiles of impurities #2;(W, Kr, and Fe)#3; with ~#4;7 cm (a/30)#3; and 10-100 ms resolution in ITER. The imaging XCS, modeled after a prototype instrument on Alcator C-Mod, uses a spherically bent crystal and 2D x-ray detectors to achieve high spectral resolving power (E / dE >#2;6000)#3; horizontally and spatial imaging vertically. Two arrays will measure Ti and both poloidal and toroidal rotation velocity profiles. The measurement of many spatial chords permits tomographic inversion for the inference of local parameters. The instrument design, predictions of performance, and results from C-Mod are presented.