This document presents a set of guidelines for authors who wish to express themselves more clearly to foreign readers, or readers whose first language is not American English. Topics include idioms, technical terms, jargon, word meaning, acronyms, and international conventions of measurement. The guidelines will help writers of technical documents present their ideas more effectively to audiences that may include individuals whose first language is not American English, including audiences with individuals from other English-speaking countries.

The Public Utility Holding Company Act of 1935 (PUHCA) and the Federal Power Act (FPA) were enacted to eliminate unfair practices and other abuses by electricity and gas holding companies by requiring federal control and regulation of interstate public utility holding companies. Comprehensive energy legislation has passed the House and Senate. The House passed H.R. 6 on April 11, 2003. On July 31, 2003, the Senate suspended debate on S. 14, inserted the text of H.R. 4 (107th Congress) as a substitute, and passed H.R. 6. A conference agreement was reached November 17, 2003, and passed by the House the next day. H.R. 6 includes an electricity title that would, in part, repeal PUHCA, would prospectively repeal the mandatory purchase requirement under PURPA, and would create an electric reliability organization. On June 15, 2004, H.R. 4503, a comprehensive energy policy bill, passed the House.

Insulated pressure vessels are cryogenic-capable pressure vessels that can be fueled with liquid hydrogen or ambient-temperature compressed hydrogen. This flexibility results in multiple advantages with respect to compressed hydrogen tanks or low-pressure liquid hydrogen tanks. Our work is directed at verifying that commercially available aluminum-lined, fiber-wrapped pressure vessels can be safely used to store liquid hydrogen. A series of tests have been conducted, and the results indicate that no significant vessel damage has resulted from cryogenic operation. Future activities include a demonstration project in which the insulated pressure vessels will be installed and tested on two vehicles. A draft standard will also be generated for certification of insulated pressure vessels.

We are working on developing an alternative technology for storage of hydrogen or natural gas on light-duty vehicles. This technology has been titled insulated pressure vessels. Insulated pressure vessels are cryogenic-capable pressure vessels that can accept either liquid fuel or ambient-temperature compressed fuel. Insulated pressure vessels offer the advantages of cryogenic liquid fuel tanks (low weight and volume), with reduced disadvantages (fuel flexibility, lower energy requirement for fuel liquefaction and reduced evaporative losses). The work described in this paper is directed at verifying that commercially available pressure vessels can be safely used to store liquid hydrogen or LNG. The use of commercially available pressure vessels significantly reduces the cost and complexity of the insulated pressure vessel development effort. This paper describes a series of tests that have been done with aluminum-lined, fiber-wrapped vessels to evaluate the damage caused by low temperature operation. All analysis and experiments to date indicate that no significant damage has resulted. Future activities include a demonstration project in which the insulated pressure vessels will be installed and tested on two vehicles. A draft standard will also be generated for obtaining insulated pressure vessel certification.

To enable collaboration on the daily tasks involved in scientific research, collaborative frameworks should provide lightweight and ubiquitous components that support a wide variety of interaction modes. We envision a collaborative environment as one that provides a persistent space within which participants can locate each other, exchange synchronous and asynchronous messages, share documents and applications, share workflow, and hold videoconferences. We are developing the Pervasive Collaborative Computing Environment (PCCE) as such an environment. The PCCE will provide integrated tools to support shared computing and task control and monitoring. This paper describes the PCCE and the rationale for its design.

The Source Injector Program for the US Heavy Ion Fusion Virtual National Laboratory is currently exploring the feasibility of using RF gas plasma sources for a HIF driver. This source technology is presently the leading candidate for the multiple aperture concept, in which bright millimeter size beamlets are extracted and accelerated electrostatically up to 1 MeV before the beamlets are allowed to merge and form 1 A beams. Initial experiments have successfully demonstrated simultaneously high current density, {approx} 100 mA/cm{sup 2} and fast turn on, {approx} 1 {micro}s. These experiments were also used to explore operating ranges for pressure and RF power. Results from these experiments are presented as well as progress and plans for the next set of experiments for these sources.

Presently the Heavy Ion Fusion Virtual National Laboratory is researching ion sources and injector concepts to understand how to optimize beam brightness over a range of currents (50-2000 mA argon equivalent). One concept initially accelerates millimeter size, milliamp beamlets to 1 MeV before merging them into centimeter size, ampere beams. Computer simulations have shown the final brightness of the merged beams is dominated by the emittance growth of the merging process, as long as the beamlets ion temperature is below a few eV. Thus, a RF multicusp source capable of high current density can produce beams with better brightness compared to ones extracted from a colder source with a large aperture and lower current density. As such, experiments have begun to develop a RF multicusp source capable of delivering one amp of extracted beam current. It is expected that it will require 10 kW of 13 MHz RF power delivered via a quartz shielded, one and half turn, four inch diameter antenna. Important considerations in the development of the source include the dependence of current density and beam ion temperature on consumed RF power and gas pressure. A fast rise time ({approx}100 ns) for the extracted beam pulse must also …

The overall objective of this project is the three phase development of an Early Entrance Coproduction Plant (EECP) which produces at least one product from at least two of the following three categories: (1) electric power (or heat), (2) fuels, and (3) chemicals. The objective is to have these products produced by technologies capable of using synthesis gas derived from coal and/or other carbonaceous feedstocks. The objective of Phase I is to determine the feasibility and define the concept for the EECP located at a specific site; develop a Research, Development, and Testing (RD&T) Plan for implementation in Phase II; and prepare a Preliminary Project Financing Plan. The objective of Phase II is to implement the work as outlined in the Phase I RD&T Plan to enhance the development and commercial acceptance of coproduction technology that produces high-value products, particularly those that are critical to our domestic fuel and power requirements. The project will resolve critical knowledge and technology gaps on the integration of gasification and downstream processing to coproduce some combination of power, fuels, and chemicals from coal and/or other carbonaceous feedstocks. The objective of Phase III is to develop an engineering design package and a financing and testing …

Today's restrictive environmental regulations encourage paper mills to close their water systems. Closed water systems increase the level of contaminants significantly. Accumulations of solid suspensions are detrimental to both the papermaking process and the final products. To remove these solids, technologies such as flotation using dissolved air (DAF), centrifuging, and screening have been developed. Dissolved Air Flotation systems are commonly used to clarify whitewater. These passive systems use high pressure to dissolve air into whitewater. When the pressure is released, air micro-bubbles form and attach themselves to fibers and particles, which then float to the surface where they are mechanically skimmed off. There is an economic incentive to explore alternatives to the DAF technology to drive down the cost of whitewater processing and minimize the use of chemicals. The installed capital cost for a DAF system is significant and a typical DAF system takes up considerable space. An alternative approach, which is the subject of this project, involves a dual method combining the advantages of chemical flocculation and in-line ultrasonic clarification to efficiently remove flocculated contaminants from a water stream

The project Production Scale Implementation of a Petroleum Contaminated Soils Bioreactor was launched in FY00 and showed that bioremediation can be performed under strictly controlled conditions. Initial results showed a 50 percent reduction of total petroleum hydrocarbon concentration in soil from the Czechowice-Dziedzice refinery. It was determined that changes in the design and construction of the bioreactor could improve system performance.

We have developed cermet membranes that nongalvanically separate hydrogen from gas mixtures. The highest measured hydrogen flux was 16.2 cm{sup 3} (STP)/min-cm{sup 2} for an ANL-3a membrane at 900 C. For ANL-3 membranes with thickness of 0.04-0.5 mm, permeation rate is limited by the bulk diffusion of hydrogen through the metal phase. The effect of hydrogen partial pressure on permeation rate confirmed this conclusion and suggested that higher permeation rates may be obtained by decreasing the membrane thickness. Permeation rate in a syngas atmosphere for times up to 190 h showed no degradation in performance, which indicates that ANL-3 may be suitable for long-term, practical hydrogen separation.

None

EUV mask blanks are fabricated by depositing a reflective Mo/Si multilayer film onto super-polished substrates. Small defects in this thin film coating can significantly alter the reflected field and introduce defects in the printed image. Ideally one would want to produce defect-free mask blanks; however, this may be very difficult to achieve in practice. One practical way to increase the yield of mask blanks is to effectively repair multilayer defects, and to this effect they present two complementary defect repair strategies for use on multilayer-coated EUVL mask blanks. A defect is any area on the mask which causes unwanted variations in EUV dose in the aerial image obtained in a printing tool, and defect repair is correspondingly defined as any strategy that renders a defect unprintable during exposure. The term defect mitigation can be adopted to describe any strategy which renders a critical defect non-critical when printed, and in this regard a non-critical defect is one that does not adversely affect device function. Defects in the patterned absorber layer consist of regions where metal, typically chrome, is unintentionally added or removed from the pattern leading to errors in the reflected field. There currently exists a mature technology based on ion …

The high volume inspection equipment currently available to support development of EUV blanks is non-actinic. The same is anticipated for patterned EUV mask inspection. Once potential defects are identified and located by such non-actinic inspection techniques, it is essential to have instrumentation to perform detailed characterization, and if repairs are performed, re-evaluation. The ultimate metric for the acceptance or rejection of a mask due to a defect, is the wafer level impact. Thus measuring the aerial image for the site under question is required. An EUV Aerial Image Microscope (''AIM'') similar to the current AIM tools for 248nm and 193nm exposure wavelength is the natural solution for this task. Due to the complicated manufacturing process of EUV blanks, AIM measurements might also be beneficial to accurately assessing the severity of a blank defect. This is an additional application for an EUV AIM as compared to today's use In recognition of the critical role of an EUV AIM for the successful implementation of EUV blank and mask supply, International SEMATECH initiated this design study with the purpose to define the technical requirements for accurately simulating EUV scanner performance, demonstrating the feasibility to meet these requirements and to explore various technical approaches …

The purpose of this document is to provide a calculus spreadsheet for the design of second-order pseudo-gaussian shapers. A very interesting reference is given by C.H. Mosher ''Pseudo-Gaussian Transfer Functions with Superlative Recovery'', IEEE TNS Volume 23, p. 226-228 (1976). Fred Goulding and Don Landis have studied the structure of those filters and their implementation and this document will outline the calculation leading to the relation between the coefficients of the filter. The general equation of the second order pseudo-gaussian filter is: f(t) = P{sub 0} {center_dot} e{sup -3kt} {center_dot} sin{sup 2}(kt). The parameter k is a normalization factor.

The primary goal of this program is to develop a commercially viable enthalpy exchangers that exhibits performance comparable to state-of-the-art exchangers, meets flammability test standards, supports no biological growth, maintains mechanical integrity for a 10 year life (typical of competitive warrantees) and exhibits a total media raw material cost of approximately 1/5 of that of the competition. The first three program tasks were devoted to: (1) gathering background information on competitors and their methods of manufacturing; (2) establishing experimental and evaluation procedures for the program; (3) identifying potential desiccants, supports and binders to be tested; (4) preparing matrix combinations on a laboratory scale; (5) testing component combinations for equilibrium moisture uptakes at different relative humidities (isotherms) and dynamic moisture adsorption rates; (6) using media adsorption properties to models to predict exchanger performance; (7) estimating ease of manufacture and finished wheel costs; and (8) calculating raw material, wheel and cassette costs based on the best media formulations. Since the rotary enthalpy exchangers have high rotational speeds, uptake rate is at least as important as equilibrium moisture uptake. Therefore, a procedure and apparatus were developed to determine adsorption rate so that the Lewis number (the ratio of mass transfer resistance to heat …

This report describes the groundwater monitoring and corrective-action program at the M-Area Hazardous Waste Management Facility (HWMF) and the Metallurgical Laboratory (Met Lab) HWMF at the Savannah River Site (SRS) during the third and fourth quarters of 2001. The report also provides a summary of the corrective-action program for the entire year. This program is required by South Carolina Resource Conservation and Recovery Act (RCRA) Hazardous Waste Permit SC1 890 008 989 and Section 264.100(g) of the South Carolina Hazardous Waste Management Regulations.

A review was conducted of past laboratory-scale test methods and to assess their validity for ranking materials and lubricants for use as piston and liner materials in compression-ignition (CI) and spark-ignition (SI) engines. Most of the previous work was aimed at simulating SI engine environments. This report begins with a discussion of the numerous factors that can affect the validity of an approach to simulating engine conditions in a laboratory. These include not only mechanical, chemical and thermal factors, but also human factors as regards how the vehicle is operated and maintained. The next section provides an annotated review of open literature publications that address the issues of laboratory simulation of engine components. A comparison of these studies indicates a lack of sufficient standardization in procedures to enable a systematic comparison of one publication to another. There were just a few studies that compared several laboratory test methods to engine test results, and these indicated that some test methods correlate, at least qualitatively, better than others. The last section provides a series of recommendations for improving the accuracy and validity of laboratory-scale simulations of engine behavior. It became clear that much of the engine wear damage occurs during start-up when …

Appropriations are one part of a complex federal budget process that includes budget resolutions, appropriations (regular, supplemental, and continuing) bills, rescissions, and budget reconciliation bills. This report is a guide to one of the 13 regular appropriations bills that Congress passes each year.

Recent work on the VIM Monte Carlo code has aimed at advanced data libraries, ease of use, availability to users outside of Argonne, and fission source convergence algorithms in eigenvalue calculations. VIM is one of three US Monte Carlo codes in the USDOE Nuclear Criticality Safety Program, and is available through RSICC and the NEA Data Bank.

The objective of this project is to demonstrate at pilot scale the use of solid honeycomb catalysts to promote the oxidation of elemental mercury in the flue gas from coal combustion. The project is being funded by the U.S. DOE National Energy Technology Laboratory under Cooperative Agreement DE-FC26-01NT41185. EPRI, Great River Energy (GRE), and City Public Service (CPS) of San Antonio are project co-funders. URS Group is the prime contractor. The mercury catalytic oxidation process under development uses catalyst materials applied to honeycomb substrates to promote the oxidation of elemental mercury in the flue gas from coal-fired power plants that have wet lime or limestone flue gas desulfurization (FGD) systems. Oxidized mercury is removed in the wet FGD absorbers and co-precipitates in a stable form with the byproducts from the FGD system. The co-precipitated mercury does not appear to adversely affect the disposal or reuse properties of the FGD byproduct. The current project will test previously identified, effective catalyst materials at a larger, pilot scale and in a commercial form, so as to provide engineering data for future full-scale designs. The pilot-scale tests will continue for up to 14 months at each of two sites to provide longer-term catalyst life …

None

Electroluminescent devices such as light-emitting diodes (LED) and high-energy density batteries. These new polymers offer cost savings, weight reduction, ease of processing, and inherent rugged design compared to conventional semiconductor materials. The photovoltaic industry has grown more than 30% during the past three years. Lightweight, flexible solar modules are being used by the U.S. Army and Marine Corps for field power units. LEDs historically used for indicator lights are now being investigated for general lighting to replace fluorescent and incandescent lights. These so-called solid-state lights are becoming more prevalent across the country since they produce efficient lighting with little heat generation. Conductive polymers are being sought for battery development as well. Considerable weight savings over conventional cathode materials used in secondary storage batteries make portable devices easier to carry and electric cars more efficient and nimble. Secondary battery sales represent an $8 billion industry annually. The purpose of the project was to synthesize and characterize conductive polymers. TRACE Photonics Inc. has researched critical issues which affect conductivity. Much of their work has focused on production of substituted poly(phenylenevinylene) compounds. These compounds exhibit greater solubility over the parent polyphenylenevinylene, making them easier to process. Alkoxy substituted groups evaluated during this study …

With today's tightening budgets computer applications must provide ''true'' long-term benefit to the company. Businesses are spending large portions of their budgets ''Re-Engineering'' old systems to take advantage of ''new'' technology. But what they are really getting is simply a new interface implementing the same incomplete or poor defined requirements as before. ''True'' benefit can only be gained if sound analysis and design practices are used. WHAT data and processes are required of a system is not the same as HOW the system will be implemented within a company. It is the System Analyst's responsibility to understand the difference between these two concepts. The paper discusses some simple techniques to be used during the Analysis and Design phases of projects, as well as the information gathered and recorded in each phase and how it is transformed between these phases. The paper also covers production application generated using Oracle Designer. Applying these techniques to ''real world'' problems, the applications will meet the needs for today's business and adapt easily to ever-changing business environments.