Policymakers rely on transportation statistics, including data on personal travel behavior, to formulate strategic transportation policies and to improve the safety and efficiency of the U.S. transportation system. Data on personal travel trends are needed to examine the reliability, efficiency, capacity, and flexibility of the Nation's transportation system to meet current demands and accommodate future demands; to assess the feasibility and efficiency of alternative congestion-alleviating technologies (e.g., high-speed rail, magnetically levitated trains, intelligent vehicle and highway systems); to evaluate the merits of alternative transportation investment programs; and to assess the energy-use and air-quality impacts of various policies. To address these data needs, the Department of Transportation (DOT) initiated an effort in 1969 to collect detailed data on personal travel. The 1969 survey was the first Nationwide Personal Transportation Survey (NPTS). The survey was conducted again in 1977, 1983, 1990, and 1995. The 1995 survey was cosponsored by four DOT agencies: Federal Highway Administration (FHWA), Bureau of Transportation Statistics (BTS), Federal Transit Administration (FTA), and National Highway Traffic Safety Administration (NHTSA). The primary objective of the survey was to collect trip-based data on the nature and characteristics of personal travel. Commercial and institutional travel were not part of the survey.

The U.S. Department of Energy (DOE) Office of Industrial Technologies, Mining Industry of the Future Program, works with the mining industry to further the industry's advances toward environmental and economic goals. Two of these goals are (1) responsible emission and by-product management and (2) low-cost and efficient production (DOE 1998). DOE formed an alliance with the National Mining Association (NMA) to strengthen the basis for research projects conducted to benefit the mining industry. NMA and industry representatives actively participate in this alliance by evaluating project proposals and by recommending research project selection to DOE. Similarly, the National Research Council (NRC) has recently and independently recommended research and technology development opportunities in the mining industry (NRC 2001). The Oak Ridge National Laboratory (ORNL) and Colorado School of Mines engineers conducted one such project for DOE regarding by -product recovery from mining process residue. The results of this project include this report on mining industry process residue and waste with opportunity for by-product recovery. The U.S. mineral processing industry produces over 30,000,000 metric tons per year of process residue and waste that may contain hazardous species as well as valuable by-products. This study evaluates the copper, lead, and zinc commodity sectors which …

Although bulk silicon is not known to exhibit susceptibility to cyclic fatigue, micron-scale structures made from silicon films are known to be vulnerable to degradation by fatigue in ambient air environments, a phenomenon that has been recently modeled in terms of a mechanism of sequential oxidation and stress-corrosion cracking of the native oxide layer.

A field test of an aerosol-spray duct-sealing technology and a conventional, best-practice approach was performed in 80 homes to determine the efficacy and programmatic needs of the duct-sealing technologies as applied in the U.S. Department of Energy Weatherization Assistance Program. The field test was performed in five states: Iowa, Virginia, Washington, West Virginia, and Wyoming. The study found that, compared with the best-practice approach, the aerosol-spray technology is 50% more effective at sealing duct leaks and can potentially reduce labor time and costs for duct sealing by 70%, or almost 4 crew-hours. Further study to encourage and promote use of the aerosol-spray technology within the Weatherization Assistance Program is recommended. A pilot test of full production weatherization programs using the aerosol-spray technology is recommended to develop approaches for integrating this technology with other energy conservation measures and minimizing impacts on weatherization agency logistics. In order to allow or improve adoption of the aerosol spray technology within the Weatherization Assistance Program, issues must be addressed concerning equipment costs, use of the technology under franchise arrangements with Aeroseal, Inc. (the holders of an exclusive license to use this technology), software used to control the equipment, safety, and training. Application testing of the …

One potentially large source of underutilized distributed generation (DG) capacity exists in single-phase standby backup gensets on farms served from single-phase feeder laterals. Utilizing the excess capacity would require interconnecting to the utility system. Connecting single-phase gensets to the utility system presents some interesting technical issues that have not been previously investigated. This paper addresses several of the interconnection issues associated with this form of DG including voltage regulation, harmonics, overcurrent protection, and islanding. A significant amount of single-phase DG can be accommodated by the utility distribution system, but there are definite limitations due to the nature and location of the DG. These limitations may be more restrictive than is commonly assumed for three-phase DG installed on stronger parts of the electric distribution system.

The transport, flow shear, and linear growth rates of microturbulence are studied for a Joint European Torus (JET) plasma with high central q in which an internal transport barrier (ITB) forms and grows to a large radius. The linear microturbulence growth rates of the fastest growing (most unstable) toroidal modes with high toroidal mode number are calculated using the GS2 and FULL gyrokinetic codes. These linear growth rates, gamma (subscript lin) are large, but the flow-shearing rates, gamma (subscript ExB) (dominated by the toroidal rotation contribution) are also comparably large when and where the ITB exists.

Building upon the 1999 AD Little Study, an expanded market analysis was performed by GE Power Systems in 2001 to quantify the potential demand for an NGGT product. This analysis concluded that improvements to the US energy situation might be best served in the near/mid term (2002-2009) by a ''Technology-Focused'' program rather than a specific ''Product-Focused'' program. Within this new program focus, GEPS performed a parametric screening study of options in the three broad candidate categories of gas turbines: aero-derivative, heavy duty, and a potential hybrid combining components of the other two categories. GEPS's goal was to determine the best candidate systems that could achieve the DOE PRDA expectations and GEPS's internal design criteria in the period specified for initial product introduction, circa 2005. Performance feasibility studies were conducted on candidate systems selected in the screening task, and critical technology areas were identified where further development would be required to meet the program goals. DOE PRDA operating parameters were found to be achievable by 2005 through evolutionary technology. As a result, the study was re-directed toward technology enhancements for interim product introductions and advanced/revolutionary technology for potential NGGT product configurations. Candidate technologies were identified, both evolutionary and revolutionary, with a …

Retardation of nuclear contaminants in rock matrices can lead to long retention times, allowing substantial radionuclide decay prior to eventual release. Imbibition and diffusion into the rock matrix can move contaminants away from an active fracture, thereby contributing to their retardation. However, diffusive transport in some rocks may behave anomalously because of their sparsely connected porespace, in contrast to diffusion in rocks with denser pore connections. We examined imbibition of weakly sorbing tracers into welded tuff and Indiana sandstone, and water imbibition into metagraywacke and Berea sandstone. Tuff samples were initially equilibrated to 12% and 76% water (v/v) within controlled humidity chambers, while the other rocks were air-dried. For imbibition, one face was exposed to water, with or without tracer, and uptake was measured over time. Following imbibition, tracer concentration measurements were made at fine (1 mm) increments. Three anomalous results were observed: (1) Indiana sandstone and metagraywacke showed mass of imbibed water scaling as time{sup 0.26}, while tuff and Berea sandstone showed the more classical scaling with time{sup 0.05}; (2) tracer movement into dry (2% initial saturation) Indiana sandstone showed a dispersion pattern similar to that expected during tracer movement into moist (76% initial saturation) tuft and (3) tracer …

The purpose of this study was to do an initial estimate of the potential for energy savings in the state of Iowa. Several methods for determining savings were examined, including existing programs, surveys, savings calculators, and economic simulation. Each method has advantages and disadvantages, trading off between detail of information, accuracy of results, and scope. This paper concentrated on using economic simulation (the NEMS model (EIA 2000a)) to determine market potential for energy savings for the residential and commercial sectors. The results of surveys were used to calculate the economic potential for savings in the industrial sector. The NEMS model is used by the Energy Information Administration to calculate twenty-year projections of energy use for every region of the country. The results of the Annual Energy Outlook 2000 were used as the Base case (EIA 1999a). Two alternative cases were created to simulate energy savings policies. Voluntary, market-related programs were simulated by lowering the effective discount rates that end-users use when making decisions on equipment purchases. Standards programs in the residential sector were simulated by eliminating the availability of low efficiency equipment in future years. The parameters for these programs were based on the Moderate scenario from the DOE Clean …

The D0 Run2b stave structure has been tested to determine the pressure drop along the cooling line and suggest a possible cooling pipe size. The measured pressure drop, charted versus the flow rate, shows good agreement with what is theoretically predicted, the latter underestimating the experimental data in the worst case with a 5.5% error. At a fixed flow rate of 175-ml/min and bulk temperature of -15 C, a cooling pipe formed from a 0.158 inch (4.0mm) ID tube would meet the 3.0 psi target pressure drop. With the same piping and a bulk temperature of -10 C the pressure drop is around 2.3 psi.

The use of ITS-generated data as a data resource is a multifaceted challenge. The most effective way of confronting this challenge is to focus early efforts on localized areas with well-defined parameters. With the idea of starting with a well-defined problem, this research demonstrates the feasibility of using ITS-generated data to meet traffic information needs. Specifically, this study focused on two crucial traffic parameters: (1) total traffic volume, and (2) total VMT--basically, the information collected from the Traffic Monitoring Program. Traffic data collected from Florida and New York ITS deployments were used to test the communications and estimation procedures.

High power laser pulses can produce damage in high quality fused silica optics that can lead to its eventual obscuration and failure. Current models suggest the initiation of a plasma detonation due to absorbing initiators and defects, leading to the formation of shock waves. Recent experiments have found a densified layer at the bottom of damage sites, as evidence of the laser-damage model. We have studied the propagation of shock waves through fused silica using molecular dynamics. These simulations show drastic modifications in the structure and topology of the network, in agreement with experimental observations.

The Princeton Plasma Physics Laboratory (PPPL) and the Massachusetts Institute of Technology (MIT) are preparing an experiment of current profile control using lower-hybrid waves in order to produce and sustain advanced tokamak regimes in steady-state conditions in Alcator C-Mod. Unlike JET's, ToreSupra's and JT60's couplers, the C-Mod lower-hybrid coupler does not employ the now conventional multijunction design, but will have similar characteristics, compactness, and internal power division while retaining full control of the antenna element phasing. This is achieved by using 3 dB vertical power splitters and a stack of laminated plates with the waveguides milled in them. Construction is simplified and allows easy control and maintenance of all parts. Many precautions are taken to avoid arcing. Special care is also taken to avoid the recycling of reflected power which could affect the coupling and the launched n(subscript ||) spectrum. The results from C-Mod should allow further simplification in the designs of the coupler planned for KSTAR (Korea Superconducting Tokamak Advanced Research) and ITER (International Thermonuclear Experimental Reactor).

The scheme of a 62-TeV center of mass p-p collider with superbunch beams at Fermilab is proposed as a practical and realistically achievable future project. It will be built in two stages, using the same tunnel, first with a 2 Tesla low field magnet collider ring and later with a 10 Tesla high field magnet collider ring. Both low and high field magnets have twin bore aperture and will be installed in the tunnel with the circumference of 87.25 km. In each bore a proton beam is accelerated, using induction cavities to increase luminosity. In the first stage they install a 7 TeV accelerator ring with operating field of 2 Tesla, based on the superferric transmission-line design. This ring will be operated at a 14-TeV center of mass collider. This will have the same energy as the LHC, but it will have 15 times higher luminosity, namely 1.5 x 10{sup 35}/cm{sup 2}/sec. The estimated synchrotron radiation is negligible with this machine. The existing Fermilab accelerator system, including the 150 GeV main injector, will be used as the injector system. Its rough cost estimation and schedule for this first stage are presented. In the second stage proton beams are accelerated, also …

None

BTeV is a B-physics experiment that expects to begin collecting data at the C0 interaction region of the Fermilab Tevatron in the year 2006. Its primary goal is to achieve unprecedented levels of sensitivity in the study of CP violation, mixing, and rare decays in b and c quark systems. In order to realize this, it will employ a state-of-the-art first-level vertex trigger (Level 1) that will look at every beam crossing to identify detached secondary vertices that provide evidence for heavy quark decays. This talk will briefly describe the BTeV detector and trigger, focus on the software and hardware aspects of the Level 1 vertex trigger, and describe work currently being done in these areas.

Numerical studies have been performed for optimally extracting high-intensity, space-charged-limited multi-charged ion beams from an all-permanent-magnet, ''volume-type'' ECR ion source, equipped with a three-electrode extraction system. These studies clearly demonstrate the importance of being able to adjust the extraction gap in order to ensure high quality, minimum divergence (highly transportable) ion beams. Optimum extraction conditions are reached whenever the plasma meniscus has an optimum curvature for a given current density. Optimum perveance (optimum current) values are found to closely agree with those derived from elementary analytical theory for extraction of space-charge-dominated beams. Details of the electrode system design as well as angular divergence and RMS emittance versus extraction parameter data (e.g., perveance and extraction gap) are provided for ion beams of varying charge-state and mass, extracted under the influence of a mirror-geometry plasma confinement magnetic field.

This publication has been prepared to record some of the history of the Cross Section Evaluation Working Group (CSEWG). CSEWG is responsible for creating the evaluated nuclear data file (ENDF/B) which is widely used by scientists and engineers who are involved in the development and maintenance of applied nuclear technologies. This organization has become the model for the development of nuclear data libraries throughout the world. The data format (ENDF) has been adopted as the international standard. On November 5, 2001, a symposium was held at Brookhaven National Laboratory to celebrate the 50 th meeting of the CSEWG organization and the 35 th anniversary of its first meeting in November 1966. The papers presented in this volume were prepared by present and former CSEWG members for presentation at the November 2001 symposium. All but two of the presentations are included. I have included an appendix to list all of the CSEWG members and their affiliations, which has been compiled from the minutes of each of the CSEWG meetings. Minutes exist for all meetings except the 4 th meeting held in January 1968. The list includes 348 individuals from 71 organizations. The dates for each of the 50 CSEWG meetings are …

None

The pixel detector for the BTeV experiment at Fermilab provides digitized data from approximately 22 million silicon pixel channels. Portions of the detector are six millimeters from the beam providing a substantial hit rate and high radiation dose. The pixel detector data will be employed by the lowest level trigger system for track reconstruction every beam crossing. These requirements impose a considerable constraint on the readout scheme. This paper presents a readout technique that provides the bandwidth that is adequate for high hit rates, minimizes the number of radiation hard components, and satisfies all other design constraints.

The principal factors that severely limit intensities of short-lived radioactive ion beams produced by the Isotope Separator On-Line (ISOL) technique are time delays due to diffusion of radioactive species from solid or liquid target materials and their effusive-flow transport to the ion source. Although diffusion times can be reduced by proper design of short diffusion length, highly refractory targets, effusive-flow times are more difficult to assess. After diffusion from the target material, the species must travel through the target material and vapor transport system to the ion source. The time required for effusive-flow transport to the ion source depends on the conduction path, chemical reactions between the species and target material and materials of construction as well as the physical size and geometry of the transport system. We have developed a fast-valve (1 ms closing time) for introducing gaseous or vapor-state species into the target/vapor transport/ion source/system th at permits measurement of effusive-flow times for any gaseous or vaporous species (chemically active or chemically inactive) through any vapor transport system, independent of size and geometry. Characteristic times are determined from the exponential decay of the momentum analyzed ion beam intensity for the species.during effusive-flow through the vapor transport system under …

An understanding of the role of fractures at Yucca Mountain, Nevada, is needed to evaluate the suitability of the site to host a high-level nuclear waste repository. Current infiltration rates at Yucca Mountain require water to move through some fractures in the unsaturated welded units because the matrix porosity and permeability of these units are too small to accommodate the total flow. Though only about 20% of connected fractures are estimated to actively transmit water, flow and transport within fractures can greatly affect repository performance because fractures could be fast pathways for migration of radioactive particles. Under the current design, the potential repository would be located in a densely welded tuff sequence with highly variable fracture characteristics. This variability, resulting largely from the presence of lithophysal cavities, creates heterogeneous flow patterns through the unsaturated zone. Lithophysal cavities interrupt the continuity of fractures they intersect and may locally influence fracture propagation. In welded nonlithophysal zones, fractures tend to be longer and more widely spaced than in lithophysal zones, which generally display a greater number of closely spaced, short-length fractures. Seepage of water into potential waste-emplacement drifts will be affected by the fracture characteristics within the surrounding rock wall. Fractures with sufficient …

General use fact sheet about geothermal energy in Idaho. Idaho holds enormous resources - among the largest in the United States - of this clean, reliable form of energy that to date have barely been tapped.

The project described in this report was conducted by personnel from Oak Ridge National Laboratory's Grand Junction Office (ORNL/GJ). The purpose was to refine information regarding groundwater contamination emanating from the Atlas Corporation's former uranium mill in Moab, Utah.