This is the final report of a three-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Our objectives were to develop a multidisciplinary team and capabilities to develop a fundamental understanding of homogeneous, heterogeneous, and heterogenized catalysts. With the aid of theoretical chemistry approaches we explored and characterized the chemical reactivity and physical properties of a large number of catalytic systems.

We consider halo formation in continuous beams oscillating at natural modes by inspecting particle trajectories. Trajectory equations containing field nonlinearities are derived from a weighted polynomial expansion. We then use perturbational techniques to further analyze particle motion.

None

None

None

None

One of the most difficult issues of constitutional law concerns the extent to which the establishment of religion clause of the First Amendment imposes constraints on the provision of public aid to private sectarian schools. This report gives a brief overview of the evolution of the Court’s interpretation of the establishment clause in this area and itemizes the categories of aid that have been addressed by the Court and held to be constitutionally permissible or impermissible, both at the elementary and secondary school level and at the college level.

This report summarizes each of the Supreme Courts decisions in regard to instances of prayer and religion in public schools. The report gives a detailed overview of what has been held to be constitutionally permissible and constitutionally forbidden, and describes two issues as yet unsettled.

Armenia has few proven reserves of natural energy and is dependent on long, unreliable transport lines for oil and gas. Preliminary studies indicate that the wind energy potential in Armenia is more than 500 megawatts (MW), assuming a reasonable fraction of 10% of the land area in the high-wind zones. Over the long term, the Armenian government intends to meet 8%--10% of its electric consumption needs by grid-connected wind turbines. The goals of this project are to enhance Armenia's energy security, mitigate the environmental damage of conventional sources of energy, reduce future carbon dioxide emissions, build an environmentally sound and sustainable model for economic development, and promote trade between the U.S. and Armenia. The project is being funded by the Cafesjian Family Foundation, a private foundation based in the United States in Naples, Florida, with the participation of Ecotrade, Inc. of Glendale, California. The National Renewable Energy Laboratory (NREL) is providing technical assistance. As part of the wind energy development project, the authors conducted a preliminary wind-energy resource assessment for some regions in Armenia. This activity provided valuable information needed to facilitate the commercialization of wind farms in Armenia and to lay the groundwork for subsequent wind resource activities. This …

The Fiscal Year 2001 Tank Characterization Technical Sampling Basis and Waste Information Requirements Document (TSB-WIRD) has the following purposes: (1) To identify and integrate sampling and analysis needs for fiscal year (FY) 2001 and beyond. (2) To describe the overall drivers that require characterization information and to document their source. (3) To describe the process for identifying, prioritizing, and weighting issues that require characterization information to resolve. (4) To define the method for determining sampling priorities and to present the sampling priorities on a tank-by-tank basis. (5) To define how the characterization program is going to satisfy the drivers, close issues, and report progress. (6)To describe deliverables and acceptance criteria for characterization deliverables.

A brief overview of Grand Unified Models is presented with some attention paid to their predictions for neutrino oscillations. Given the well-known features of the two non-unified standard models, SM and MSSM, a listing of the features of classes of unified models is given, where a GUT flavor symmetry and/or family symmetry are introduced to reduce the number of model parameters. Some general remarks are then made concerning the type of predictions that follow for the neutrino masses and mixings.

We evaluated several concepts for a new survey for small objects in the Solar System. We designed a highly novel survey for comets in the outer region of the Solar System, which exploits the occultations of relatively bright stars to infer the presence of otherwise extremely faint objects. The populations and distributions of these objects are not known; the uncertainties span orders of magnitude! These objects are important scientifically as probes of the primordial solar system, and programmatically now that major investments may be made in the possible mitigation of the hazard of asteroid or comet collisions with the Earth.

This paper reports on the feasibility study of a proton Super-Conducting Linac (SCL) as a driver for the High-Flux Breeder Reactor (HFBR) at Brookhaven National Laboratory (BNL). The Linac operates in Continuous Wave (CW) mode to produce an average 10 MW of beam power. The Linac beam energy is 1.0 GeV. The average proton beam intensity in exit is 10 mA.

A ''new'' process for developing control systems - Less engine testing - More robust control system - Shorter development cycle time - ''Smarter'' approach to engine control - On-board models describe engine behavior - Shorter, systematic calibration process - Customer and legislative requirements designed-in.

The Cast Metal Coalition, composed of more than 22 research providers and universities and 149 industrial partners, has completed a four-year research and development partnership with the Department of Energy. This report provides brief summaries of the 29 projects performed by the Coalition. These projects generated valuable information in such aspects of the metals industry as process prediction technologies, quality control, improved alloys, product machinability, and casting process improvements.

Isotopes and accelerators, hallmarks of nuclear physics, are finding increasingly sophisticated and effective applications in the medical field. Diagnostic and therapeutic uses of radioisotopes are now a $10B/yr business worldwide, with over 10 million procedures and patient studies performed every year. This paper will discuss the use of isotopes for these applications. In addition, beams of protons and heavy ions are being more and more widely used clinically for treatment of malignancies. To be discussed here as well will be the rationale and techniques associated with charged-particle therapy, and the progress in implementation and optimization of these technologies for clinical use.

This Calculation is intended to satisfy engineering requirements for maximum 60-minute precipitation amounts for 50 and 100-year return periods at and near Yucca Mountain. This data requirement is documented in the ''Interface Control Document for Support Operations to Surface Facilities Operations Functional and Organizational Interfaces'' (CRWMS M&O 1998a). These developed data will supplement the information on 0.1 hour to 6-hour (in 0.1-hour increments) probable maximum precipitation (PMP) presented in the report, ''Precipitation Design Criteria for Storm Water Management'' (CRWMS M&O 1998b). The Reference Information Base (RIB) item, Precipitation ''Characteristics for Storm Water Management'' (M09902RIB00045 .OOO), was developed based on CRWMS M&O (1998b) and will be supplemented (via revision) with the information developed in this Calculation. The ''Development Plan for the Calculation: Precipitation Characteristics for Storm Water Management'' (CRWMS M&O 2000) was prepared in accordance with AP-2.l3Q, ''Technical Product Development Planning''. This calculation was developed in accordance with AP-3.12Q, Rev. O/ICN 2.

Background levels in detectors and radiation problems at future colliders--whether pp, e{sup +}e{sup {minus}} or {mu}{sup +}{mu}{sup {minus}} are in large part determined by the presence of muons. Neutrinos from muon decay at muon colliders or storage rings are highly collimated and propagate outward within a narrowdisk in which significant radiation doses persist out to very large distances. This paper highlights physics models and Monte Carlo algorithms developed mainly for studying these problems as well as some typical results.

The incident energy at which the azimuthal distributions in semi-central heavy ion collisions change from in-plane to out-of-plane enhancement--E{sub tran} is studied as a function of mass of emitted particles, their transverse momentum and centrality for Au+Au collisions. The analysis is performed in a reference frame rotated with the sidewards flow angle ({Theta}{sub flow}) relative to the beam axis. A systematic decrease of E{sub tran} as function of mass of the reaction products, their transverse momentum and collision centrality is evidenced. The predictions of a microscopic transport model (IQMD) are compared with the experimental results.

For the past 10 years the Advanced Industrial Materials (AIM) has supported development of new and improved materials to enable U.S. industry to improve energy efficiency, increase productivity, and reduce waste. It has been a National Laboratory based program, with work currently under way at Oak Ridge National Laboratory, Los Alamos National Laboratory, and Sandia National Laboratories, in collaboration with industrial and university partners. With the advent of the Industries of the Future (IOF) strategy within the Office of Industrial Technologies (OIT) and the scheduled completion of the Continuous Fiber Ceramic Composites (CFCC) Program in FY 2002, an integrated materials program is being developed in OIT. So this represents the last summary of AIM research and development. The new program, Industrial Materials for the Future (IMF), will be competitive in operation, with solicitations for proposals for development of materials in accordance with the IOF Technology Roadmaps, followed by merit review and funding of the best proposals. Industry will take the lead in ''industry-specific'' research and development, in cooperation with National Laboratories, as needed. National Laboratories and universities will take the lead in maintaining a base technology program, for the purpose of maintaining a continuing flow of new materials technologies. The …

The accurate detection and characterization of nonlinearities associated with damage in structural systems is an area of vibration analysis that is being widely researched. In this paper, nonlinear behavior is considered a potential indicator of damage. Most conventional damage detection methods, such as those based on resonant frequencies and mode shapes, do not accurately identify the location and extent of nonlinearities present in a given structural system. As an extension of previous work at LANL, an effort is made to validate a damage detection method proposed by Adams. This method states that the frequency response function (FRF) matrix obtained from a low-level vibration test approximates the underlying linear FRF matrix of the system. The nonlinear systems' responses to high level excitation are combined with the linear FRF in a classic feedback loop to obtain the contributions of nonlinear internal forces. The temporal and spatial characteristics of the nonlinearities present in a structural system are identified. An 8-DOF system is used as a test case to validate the aforementioned method. Results of the tests and important issues concerning the method are presented.

The purpose of this protocol is to assist US Department of Energy (DOE) sites in releasing concrete for reuse. Current regulations allow the sites to release surface-contaminated materials if their radioactivity falls below certain levels and to possibly release materials with volumetric contamination or higher levels of surface contamination on a case-by-case basis. In all cases, an ALARA (as low as reasonably achievable) analysis that evaluates the risks of releasing volumetrically contaminated concrete or concrete with higher levels of surface contamination is required as a basis for proposing and setting new release limits that allow for reuse of the concrete material. To evaluate the dose impacts of reusing radioactively contaminated material, the measured radiation levels (pCi/g or disintegrations per minute [dpm]/100 cm{sup 2}) must be converted to the estimated dose (mrem/yr) that would be received by affected individuals. The dose depends on the amounts and types of isotopes present and the time, distance, and method of exposure (e.g., inhalation or external exposure). For each disposition alternative, the protocol provides a systematic method to evaluate the impact of the dose on the affected individuals. The cost impacts of reusing concrete also need to be evaluated. They too depend on the disposition …

None

We develop scalable algorithms and object-oriented code frameworks for terascale scientific simulations on massively parallel processors (MPPs). Our research in multigrid-based linear solvers and adaptive mesh refinement enables Laboratory programs to use MPPs to explore important physical phenomena. For example, our research aids stockpile stewardship by making practical detailed 3D simulations of radiation transport. The need to solve large linear systems arises in many applications, including radiation transport, structural dynamics, combustion, and flow in porous media. These systems result from discretizations of partial differential equations on computational meshes. Our first research objective is to develop multigrid preconditioned iterative methods for such problems and to demonstrate their scalability on MPPs. Scalability describes how total computational work grows with problem size; it measures how effectively additional resources can help solve increasingly larger problems. Many factors contribute to scalability: computer architecture, parallel implementation, and choice of algorithm. Scalable algorithms have been shown to decrease simulation times by several orders of magnitude.