We argue that extended technicolor augmented with topcolor requires that all mixing between the third and the first two quark generations resides in the mixing matrix of left-handed down quarks. Then, the anti-B_d--B_d mixing that occurs in topcolor models constrains the coloron and Z' boson masses to be greater than about 5 TeV. This implies fine tuning of the topcolor couplings to better than 1percent.

Natural radionuclides have been proposed for use in assessing the transport of ozone and aerosols in the troposphere. For example, {sup 7}Be is known to be produced in the upper troposphere and lower stratosphere by interactions with cosmogenic particles. Beryllium-7 has a 53.28-day half-life and is a gamma emitter that attaches itself to fine particles in the atmosphere once it is formed. Indeed, in tropospheric aerosol samples TBe is typically found in association with aerosol particles that are 0.3 {micro}m in diameter. Some investigators have asserted that ozone from aloft can be transported into rural and urban regions during stratospheric/tropospheric folding events, leading to increased background levels of ozone. During the Texas 2000 Air Quality study, aerosol samples with a 2.5-{micro}m cutoff were collected during 12-hour cycles (day/night) for a 30-day period at the Deer Park, Texas, field site in August-September 2000. To monitor {sup 7}Be levels, high-volume samples were collected on glass fiber filters on Julian dates 225-259. Sample collection was at a field site near a city park, away from any nearby traffic. This site is under routine operation by the Texas Natural Resource Conservation Commission. Instruments operated at this same site during the study period included an …

A potential scenario for retrieving saltcake from single shell tanks is the ''Rainbird{reg_sign} sprinkler'' method. Water is distributed evenly across the surface of the saltcake and allowed to percolate by gravity through the waste. The salt dissolves in the water, forming a saturated solution. The saturated liquid is removed by a saltwell pump situated near the bottom of the tank. By this method, there is never a large inventory of liquid in the tank that could pose a threat of leakage. There are many variables or factors that can influence the hydrodynamics of this retrieval process. They include saltcake porosity; saltwell pumping rate; salt dissolution chemistry; factors that could promote flow channeling (e.g. tank walls, dry wells, inclusions or discontinuities in the saltcake); method of water distribution; plug formation due to crystal formations or accumulation of insoluble solids. A brief literature search indicates that very little experimental data exist on these aspects of saltcake dissolution (Wiersma 1996, 1997). The tests reported here were planned (Herting, 2000) to provide preliminary data and information for planning future, scaled-up tests of the sprinkler method.

Correspondence issued by the General Accounting Office with an abstract that begins "Concerns have been raised about the use of unreconciled activity address codes to requisition new and excess government property. The Department of Defense's (DOD) regulation 4000.25-6-M requires that all military services and DOD activities reconcile the activity codes to the Defense Automatic Addressing System Center's master file. Such reconciliations could prevent unauthorized personnel from requesting and receiving government property. GAO found, however, that many military service points failed to comply with DOD's regulation. Most indicated that they were unaware of the requirement. As a result of this, 27,879 activity codes appeared either in the agency record but not the Addressing System Center's master file or in the Center's file but not the agency record. In addition, agencies that have their own internal activity code files do not routinely reconcile to the master file. This failure resulted in 97,450 activity codes being identified as questionable. In both situations, inventory management is vulnerable to waste, fraud, and abuse. In fact, preliminary indications are that such questionable activity codes were used to requisition millions of dollars worth of excess and new property."

The Facilities Disposition Division (FDD) at the Savannah River Site is engaged in planning the deactivation/closure of three of the site's five reactor disassembly basins. Activities are currently underway at 105-R Disassembly Basin and will continue with the 105-P and 105-C disassembly basins. The basins still contain the cooling and shielding water that was present when operations ceased. Low concentrations of radionuclides are present, with tritium, Cs-137, and Sr-90 being the major contributors. Although there is no evidence that any of the basins have leaked, the 50-year-old facilities will eventually contaminate the surrounding groundwaters. The FDD is pursuing a pro-active solution to close the basins in-place and prevent a release to the groundwater. In-situ ion-exchange is currently underway at the R-Reactor Disassembly Basin to reduce the Cs and Sr concentrations to levels that would allow release of the treated water to previously used on-site cooling ponds. A NEPA Environmental Assessment (EA) is being prepared to propose the preferred closure alternative for each of the three basins. The EA will be the primary mechanism to inform the public and gain stakeholder and regulatory approval.

Correspondence issued by the General Accounting Office with an abstract that begins "This report focuses on the military's inventory management activities. Army activities and contractors are assigned activity codes to requisition property in the military supply system. Some of these codes are identified as "unauthorized" to requisition and are primarily used as a ship-to address. GAO found that 15 percent of Army activity codes identified as unauthorized to requisition were inappropriately used to requisition more than $2.6 billion in new government property during the past five years. These problems exist because activity coordinators are poorly trained or inexperienced. The Army also lacks internal controls to prevent such unauthorized requisitions."

None

A letter report issued by the General Accounting Office with an abstract that begins "The Federal Aviation Administration's (FAA) agencywide computer security programs have serious, pervasive problems in the following key areas: personnel security, facility physical security, operational systems security, information systems security management, service continuity, and intrusion detection. Until FAA addresses the pervasive weaknesses in its computer security program, its critical information systems will remain at increased risk of intrusion and attack and its aviation operations will also remain at risk."

This report discusses issues regarding Agriculture funding, specifically the Federal Agriculture Improvement and Reform (FAIR) Act (P.L. 104-127), which prescribed farm commodity support policy through 2002.

The Quality Assurance Project Plan (QAPjP) has been prepared for waste characterization activities to be conducted by the Transuranic (TRU) Project at the Hanford Site to meet requirements set forth in the Waste Isolation Pilot Plan (WIPP) Hazardous Waste Facility Permit, 4890139088-TSDF, Attachment B, including Attachments B1 through B6 (WAP) (DOE, 1999a). The QAPjP describes the waste characterization requirements and includes test methods, details of planned waste sampling and analysis, and a description of the waste characterization and verification process. In addition, the QAPjP includes a description of the quality assurance/quality control (QA/QC) requirements for the waste characterization program. Before TRU waste is shipped to the WIPP site by the TRU Project, all applicable requirements of the QAPjP shall be implemented. Additional requirements necessary for transportation to waste disposal at WIPP can be found in the ''Quality Assurance Program Document'' (DOE 1999b) and HNF-2600, ''Hanford Site Transuranic Waste Certification Plan.'' TRU mixed waste contains both TRU radioactive and hazardous components, as defined in the WLPP-WAP. The waste is designated and separately packaged as either contact-handled (CH) or remote-handled (RH), based on the radiological dose rate at the surface of the waste container. RH TRU wastes are not currently shipped to …

As a generator of transuranic (TRU) and TRU mixed waste destined for disposal at the Waste Isolation Pilot Plant (WIPP), the Hanford Site must ensure that its TRU waste meets the requirements of US. Department of Energy (DOE) 0 435.1, ''Radioactive Waste Management,'' and the Contact-Handled (CH) Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant (WIPP-WAC). WIPP-WAC requirements are derived from the WIPP Technical Safety Requirements, WIPP Safety Analysis Report, TRUPACT-II SARP, WIPP Land Withdrawal Act, WIPP Hazardous Waste Facility Permit, and Title 40 Code of Federal Regulations (CFR) 191/194 Compliance Certification Decision. The WIPP-WAC establishes the specific physical, chemical, radiological, and packaging criteria for acceptance of defense TRU waste shipments at WIPP. The WPP-WAC also requires that participating DOE TRU waste generator/treatment/storage sites produce site-specific documents, including a certification plan, that describe their program for managing TRU waste and TRU waste shipments before transferring waste to WIPP. Waste characterization activities provide much of the data upon which certification decisions are based. Waste characterization requirements for TRU waste and TRU mixed waste that contains constituents regulated under the Resource Conservation and Recovery Act (RCRA) are established in the WIPP Hazardous Waste Facility Permit Waste Analysis Plan (WAP). The …

Through December 1999, project work has been completed on the following activities: data preparation; basic reservoir engineering; developing a deterministic three dimensional (3-D) geologic model, a 3-D deterministic reservoir simulation model and a rock-log model; well drilling and completions; and surface facilities on the Fault Block II-A Tar (Tar II-A) Zone. Work is continuing on improving core analysis techniques, final reservoir tracer work, operational work and research studies to prevent thermal-related formation compaction in the Tar II-A steamflood area, and operational work on the Tar V steamflood pilot and Tar II-A post steamflood project. Work was discontinued on the stochastic geologic model and developing a 3-D stochastic thermal reservoir simulation model of the Tar II-A Zone in order to focus the remaining time on using the 3-D deterministic reservoir simulation model to provide alternatives for the Tar II-A post steamflood operations and shale compaction studies. Thermal-related formation compaction is a concern of the project team due to observed surface subsidence in the local area above the Tar II-A steamflood project. On January 12, 1999, the steamflood project lost its inexpensive steam source from the Harbor Cogeneration Plant as a result of the recent deregulation of electrical power rates in California. …

Through March 2000, project work has been completed on the following activities: data preparation; basic reservoir engineering; developing a deterministic three dimensional (3-D) geologic model, a 3-D deterministic reservoir simulation model and a rock-log model; well drilling and completions; and surface facilities on the Fault Block II-A Tar (Tar II-A) Zone. Work is continuing on improving core analysis techniques, final reservoir tracer work, operational work and research studies to prevent thermal-related formation compaction in the Tar II-A steamflood area, and operational work on the Tar V steamflood pilot and Tar II-A post steamflood project. Work was discontinued on the stochastic geologic model and developing a 3-D stochastic thermal reservoir simulation model of the Tar II-A Zone so the project team could use the 3-D deterministic reservoir simulation model to provide alternatives for the Tar II-A post steamflood operations and shale compaction studies. The project team spent the second quarter 2000 writing the 1997-2000 Annual Report, completing research for the project on the subjects mentioned above, and operating the Tar II-A post-steamflood project and the Tar V horizontal well steamflood pilot. Thermal-related formation compaction is a concern of the project team due to observed surface subsidence in the local area above …

Other written product issued by the General Accounting Office with an abstract that begins "GAO published a document on establishing core competencies for project managers. This document identifies competencies in three areas (1) financial management, (2) human resources, and (3) technical."

None

A set of twenty-three 20-L crystallizer runs exploring the importance of several engineering variables found that growth temperature is the most important variable controlling damage resistance of DKDP over the conditions investigated. Boules grown between 45 C and room temperature have a 50% probability of 3{omega} bulk damage that is 1.5 to 2 times higher than boules grown between 65 and 45 C. This raises their damage resistance above the NIF tripler specification for 8 J/cm{sup 2} operation by a comfortable margin. Solution impurity levels do not correlate with damage resistance for iron less than 200 ppb and aluminum less than 2000 ppb. The possibility that low growth temperatures could increase damage resistance in NIF-scale boules was tested by growing a large boule in a 1000-L crystallizer with a supplemental growth solution tank. Four samples representing early and late pyramid and prism growth are very close to the specification as best it is understood at the present. Implications of low temperature growth for meeting absorbance, homogeneity, and other material specifications are discussed.

Rhenium generally improves the properties of molybdenum, and, therefore, there is interest in use of Mo-Re alloys in space system applications. Both Mo and Re have relatively low solubilities for oxygen but readily form oxide scales when exposed to oxidizing environments above {approx}350 C. Studies are being conducted on Mo-41Re to determine the rate of oxidation, type of scale formation, and effects on mechanical properties as a function of temperature and partial pressure of oxygen. Thus far, weight gains associated with formation of MoO{sub 2} have been found for P{sub o{sub 2}} < 10{sup -3} Pa (torr) in vacuum, and weight losses associated with evaporation of MoO{sub 3} above 10{sup -3} Pa. However, no significant changes in tensile properties were measured.

None

This report summarizes the research performed in the past year in the Argonne Physics Division. The Division's programs include operation of ATLAS as a national heavy-ion user facility, nuclear structure and reaction research with beams of heavy ions, accelerator research and development especially in superconducting radio frequency technology, nuclear theory and medium energy nuclear physics. The Division took significant strides forward in its science and its initiatives for the future in the past year. Major progress was made in developing the concept and the technology for the future advanced facility of beams of short-lived nuclei, the Rare Isotope Accelerator. The scientific program capitalized on important instrumentation initiatives with key advances in nuclear science. In 1999, the nuclear science community adopted the Argonne concept for a multi-beam superconducting linear accelerator driver as the design of choice for the next major facility in the field a Rare Isotope Accelerator (WA) as recommended by the Nuclear Science Advisory Committee's 1996 Long Range Plan. Argonne has made significant R&D progress on almost all aspects of the design concept including the fast gas catcher (to allow fast fragmentation beams to be stopped and reaccelerated) that in large part defined the RIA concept the superconducting rf …

The Fuel Retrieval System (FRS) Process Validation Procedure (Stegen 2000) requires that a specified quantity of fuel processed through the Primary Cleaning Machine (PCM) be assessed for cleanliness during initial operational and process validation testing. Specifically, these assessments are visual examinations of the fuel, performed to confirm that the PCM adequately cleans the fuel elements of canister sludge. The results of these examinations will be used to demonstrate that residual quantities of canister particulate on fuel elements loaded into Multi-Canister Overpacks (MCOs) are within projected levels used to establish safety basis limits (Sloughter 2000). The fuel assessments, performed as part of the validation process, will be conducted during the Hot Operations portion of the Phased Startup Initiative (PSI) of the Fuel Retrieval and Integrated Water Treatment Systems (Pajunen 2000). Hot Operations testing constitutes Phases 3 and 4 of the PSI. The fuel assemblies in all candidate canisters will be thoroughly examined during these test phases (highly degraded fuel assemblies that qualify as scrap are exempt from evaluation). During subsequent production operation of the FRS, only periodic examinations for cleanliness will be performed and documented. This document describes the specific processes and techniques that will be applied in performing the cleanliness …

None

Congressional interest in the value of intellectual property has grown as technology becomes increasingly important to the United States. It is now widely accepted that technological progress accounts for up to one-half of the nation's economic growth. Concurrently, the role of patents has changed as the use of cooperative research and development (R&D) expands to facilitate this technological advancement and generate new products, processes, and services for the marketplace.

A compilation is made of the various ways in which quantum phenomena enter into the design and operation of a neutrino factory. They include production of pions, decay of pions into muons, ionization energy loss of muons in material, scattering and energy straggling of muons in material, polarization of muons, and the decay of muons into neutrinos, and the radiation effect of neutrinos. For each process formulas are presented which cover the basic mechanism. A discussion is presented of the areas of uncertainty and of the experiments, underway and proposed, which will reduce the uncertainty to an acceptable level.

In this talk the authors present a highly accurate coarsening algorithm for constructing coarse finite element spaces to be used in algebraic multigrid methods designed for finite element problems on generally unstructured meshes. The new algorithm relies on removing certain percentage of the high oscillating components from the spectrum of local stiffness matrices corresponding to element agglomerations. By doing so, one is guaranteed that the hierarchical complement finite element subspace gives rise to a well conditioned matrix. The coarsening consists of an agglomeration step and of computing a few minimal eigenvectors of the corresponding assembled agglomerate stiffness matrix. The method requires access to the individual element matrices. Based on the topological agglomeration algorithms they employed one is able to define coarse elements and coarse element matrices thus allowing for recursive use of the same algorithm. Some numerical illustration for elliptic problems is also given.