Resource Type

Space-charge compensation in high-intensity proton rings (open access)

Space-charge compensation in high-intensity proton rings

Recently, it was proposed to use negatively charged electron beams for compensation of beam-beam effects due to protons in the Tevatron collider. The authors show that a similar compensation is possible in space-charge dominated low energy proton beams. The idea has a potential of several-fold increase of the FNAL Booster beam brightness. Best results will be obtained using three electron lenses around the machine circumference, using co-moving electron beam with time structure and profile approximately matched to the proton beam. This technique, if feasible, will be more cost effective than the straightforward alternative of increasing the energy of the injection linac.
Date: September 21, 2000
Creator: A. Burov, G.W. Foster and V.D. Shiltsev
System: The UNT Digital Library
Novel Source Ionizer Options for Polarized Ions (open access)

Novel Source Ionizer Options for Polarized Ions

N/A
Date: September 1, 2000
Creator: A., Hershcovitch
System: The UNT Digital Library
Polarized proton beam acceleration with a single Siberian Snake in each RHIC ring (open access)

Polarized proton beam acceleration with a single Siberian Snake in each RHIC ring

N/A
Date: March 1, 2000
Creator: A., Lehrach; Luccio, A. U. & Roser, T.
System: The UNT Digital Library
CATALYSIS SCIENCE AND TECHNOLOGY (open access)

CATALYSIS SCIENCE AND TECHNOLOGY

This is the final report of a three-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Our objectives were to develop a multidisciplinary team and capabilities to develop a fundamental understanding of homogeneous, heterogeneous, and heterogenized catalysts. With the aid of theoretical chemistry approaches we explored and characterized the chemical reactivity and physical properties of a large number of catalytic systems.
Date: August 1, 2000
Creator: ABRAMS, M.; BAKER, R. & AL, ET
System: The UNT Digital Library
Spectroscopic Detection of Pathogens (open access)

Spectroscopic Detection of Pathogens

The goal of this LDRD Research project was to provide a preliminary examination of the use of infrared spectroscopy as a tool to detect the changes in cell cultures upon activation by an infectious agent. Due to a late arrival of funding, only 5 months were available to transfer and setup equipment at UTTM,develop cell culture lines, test methods of in-situ activation and collect kinetic data from activated cells. Using attenuated total reflectance (ATR) as a sampling method, live cell cultures were examined prior to and after activation. Spectroscopic data were collected from cells immediately after activation in situ and, in many cases for five successive hours. Additional data were collected from cells activated within a test tube (pre-activated), in both transmission mode as well as in ATR mode. Changes in the infrared data were apparent in the transmission data collected from the pre-activated cells as well in some of the pre-activated ATR data. Changes in the in-situ activated spectral data were only occasionally present due to (1) the limited time cells were studied and (2) incomplete activation. Comparison of preliminary data to infrared bands reported in the literature suggests the primary changes seen are due an increase in ribonucleic …
Date: November 1, 2000
Creator: ALAM,M. KATHLEEN; TIMLIN,JERILYN A.; MARTIN,LAURA E.; HJELLE,DRIAN; LYONS,RICK & GARRISON,KRISTIN
System: The UNT Digital Library
Monte Carlo simulations of phosphate polyhedron connectivity in glasses (open access)

Monte Carlo simulations of phosphate polyhedron connectivity in glasses

Monte Carlo simulations of phosphate tetrahedron connectivity distributions in alkali and alkaline earth phosphate glasses are reported. By utilizing a discrete bond model, the distribution of next-nearest neighbor connectivities between phosphate polyhedron for random, alternating and clustering bonding scenarios was evaluated as a function of the relative bond energy difference. The simulated distributions are compared to experimentally observed connectivities reported for solid-state two-dimensional exchange and double-quantum NMR experiments of phosphate glasses. These Monte Carlo simulations demonstrate that the polyhedron connectivity is best described by a random distribution in lithium phosphate and calcium phosphate glasses.
Date: January 1, 2000
Creator: ALAM,TODD M.
System: The UNT Digital Library
Accident and Off Normal Response and Recovery from Multi Canister Overpack (MCO) Processing Events (open access)

Accident and Off Normal Response and Recovery from Multi Canister Overpack (MCO) Processing Events

In the process of removing spent nuclear fuel (SNF) from the K Basins through its subsequent packaging, drymg, transportation and storage steps, the SNF Project must be able to respond to all anticipated or foreseeable off-normal and accident events that may occur. Response procedures and recovery plans need to be in place, personnel training established and implemented to ensure the project will be capable of appropriate actions. To establish suitable project planning, these events must first be identified and analyzed for their expected impact to the project. This document assesses all off-normal and accident events for their potential cross-facility or Multi-Canister Overpack (MCO) process reversal impact. Table 1 provides the methodology for establishing the event planning level and these events are provided in Table 2 along with the general response and recovery planning. Accidents and off-normal events of the SNF Project have been evaluated and are identified in the appropriate facility Safety Analysis Report (SAR) or in the transportation Safety Analysis Report for Packaging (SARP). Hazards and accidents are summarized from these safety analyses and listed in separate tables for each facility and the transportation system in Appendix A, along with identified off-normal events. The tables identify the general response …
Date: September 19, 2000
Creator: ALDERMAN, C.A.
System: The UNT Digital Library
Fast Grid Search Algorithm for Seismic Source Location (open access)

Fast Grid Search Algorithm for Seismic Source Location

The spatial and temporal origin of a seismic energy source are estimated with a first grid search technique. This approach has greater likelihood of finding the global rninirnum of the arrival time misiit function compared with conventional linearized iterative methods. Assumption of a homogeneous and isotropic seismic velocity model allows for extremely rapid computation of predicted arrival times, but probably limits application of the method to certain geologic environments and/or recording geometries. Contour plots of the arrival time misfit function in the vicinity of the global minimum are extremely useful for (i) quantizing the uncertainty of an estimated hypocenter solution and (ii) analyzing the resolving power of a given recording configuration. In particular, simultaneous inversion of both P-wave and S-wave arrival times appears to yield a superior solution in the sense of being more precisely localized in space and time. Future research with this algorithm may involve (i) investigating the utility of nonuniform residual weighting schemes, (ii) incorporating linear and/or layered velocity models into the calculation of predicted arrival times, and (iii) applying it toward rational design of microseismic monitoring networks.
Date: July 1, 2000
Creator: ALDRIDGE,DAVID F.
System: The UNT Digital Library
Cooperative Monitoring Center Occasional Paper/16: The Potential of Technology for the Control of Small Weapons: Applications in Developing Countries (open access)

Cooperative Monitoring Center Occasional Paper/16: The Potential of Technology for the Control of Small Weapons: Applications in Developing Countries

For improving the control of small arms, technology provides many possibilities. Present and future technical means are described in several areas. With the help of sensors deployed on the ground or on board aircraft, larger areas can be monitored. Using tags, seals, and locks, important objects and installations can be safeguarded better. With modern data processing and communication systems, more information can be available, and it can be more speedily processed. Together with navigation and transport equipment, action can be taken faster and at greater range. Particular considerations are presented for cargo control at roads, seaports, and airports, for monitoring designated lines, and for the control of legal arms. By starting at a modest level, costs can be kept low, which would aid developing countries. From the menu of technologies available, systems need to be designed for the intended application and with an understanding of the local conditions. It is recommended that states start with short-term steps, such as acquiring more and better radio transceivers, vehicles, small aircraft, and personal computers. For the medium term, states should begin with experiments and field testing of technologies such as tags, sensors, and digital communication equipment.
Date: July 1, 2000
Creator: ALTMANN, JURGEN
System: The UNT Digital Library
Methodology for characterizing modeling and discretization uncertainties in computational simulation (open access)

Methodology for characterizing modeling and discretization uncertainties in computational simulation

This research effort focuses on methodology for quantifying the effects of model uncertainty and discretization error on computational modeling and simulation. The work is directed towards developing methodologies which treat model form assumptions within an overall framework for uncertainty quantification, for the purpose of developing estimates of total prediction uncertainty. The present effort consists of work in three areas: framework development for sources of uncertainty and error in the modeling and simulation process which impact model structure; model uncertainty assessment and propagation through Bayesian inference methods; and discretization error estimation within the context of non-deterministic analysis.
Date: March 1, 2000
Creator: ALVIN,KENNETH F.; OBERKAMPF,WILLIAM L.; RUTHERFORD,BRIAN M. & DIEGERT,KATHLEEN V.
System: The UNT Digital Library
Acceptance Test Report for the 241-AZ-101 Ultrasonic Interface Level Analyzer (open access)

Acceptance Test Report for the 241-AZ-101 Ultrasonic Interface Level Analyzer

This document comprises the Acceptance Test Report for the 241-AZ-101 Ultrasonic Interface Level Analyzer. This document presents the results of Acceptance Testing of the 241-AZ-101 Ultrasonic Interface Level Analyzers (URSILLAs). Testing of the URSILLAs was performed in accordance with ATP-260-001, ''URSILLA Pre-installation Acceptance Test Procedure''. The objective of the testing was to verify that all equipment and components function in accordance with design specifications and original equipment manufacturer's specifications.
Date: January 27, 2000
Creator: ANDREWS, J.E.
System: The UNT Digital Library
Operational Test Report for the 241-AZ-101 Ultrasonic Interface Level Analyzer (open access)

Operational Test Report for the 241-AZ-101 Ultrasonic Interface Level Analyzer

This document comprises the Operational Test Report for the 241-AZ-101 Ultrasonic Interface Level Analyzer. The objective of the testing was to verify that all equipment and components functioned as designed following construction completion and turnover to operations.
Date: March 28, 2000
Creator: ANDREWS, J.E.
System: The UNT Digital Library
Evaluation of the Cask Transportation Facility Modifications (CTFM) compliance to DOE order 6430.1A Project A.5 and A.6 (open access)

Evaluation of the Cask Transportation Facility Modifications (CTFM) compliance to DOE order 6430.1A Project A.5 and A.6

This report was prepared to evaluate the compliance of CTFM to DOE Order 6430.1A. This document presents the results of an evaluation that was performed to assess compliance of the K West (KW) Cask Transportation Facility Modifications (CTFM) designs against applicable requirements of Department of Energy (DOE) Order 6430.1 A, General Design Criteria. This evaluation was grouped under two categories described as Cask Loadout System (CLS) and Cranes/Other Modifications.
Date: April 24, 2000
Creator: ARD, K.E.
System: The UNT Digital Library
Spent Nuclear Fuel (SNF) Project Cask and MCO Helium Purge System Design Review Completion Report Project A.5 and A.6 (open access)

Spent Nuclear Fuel (SNF) Project Cask and MCO Helium Purge System Design Review Completion Report Project A.5 and A.6

This report documents the results of the design verification performed on the Cask and Multiple Canister Over-pack (MCO) Helium Purge System. The helium purge system is part of the Spent Nuclear Fuel (SNF) Project Cask Loadout System (CLS) at 100K area. The design verification employed the ''Independent Review Method'' in accordance with Administrative Procedure (AP) EN-6-027-01.
Date: April 19, 2000
Creator: ARD, K.E.
System: The UNT Digital Library
Significance of Soft Zone Sediments at the SRS (open access)

Significance of Soft Zone Sediments at the SRS

The purpose of this report is to provide information on the origin, extent and stability of ''soft zones'' in the carbonate bearing strata at the Savannah River Site (SRS). As part of this study, a comprehensive historical compendium of how soft zones have been addressed during the past 47 years at SRS is reviewed.
Date: February 3, 2000
Creator: Aadland, R. K.
System: The UNT Digital Library
Combined approach to the inverse protein folding problem. Final report (open access)

Combined approach to the inverse protein folding problem. Final report

The main scientific contribution of the project ''Combined approach to the inverse protein folding problem'' submitted in 1996 and funded by the Department of Energy in 1997 is the formulation and development of the idea of the multilink recognition method for identification of functional and structural homologues of newly discovered genes. This idea became very popular after they first announced it and used it in prediction of the threading targets for the CASP2 competition (Critical Assessment of Structure Prediction).
Date: June 1, 2000
Creator: Abagyan, Ruben A.
System: The UNT Digital Library
ADVANCED SORBENT DEVELOPMENT (open access)

ADVANCED SORBENT DEVELOPMENT

The overall objective of this program was to develop regenerable sorbents for use in the temperature range of 343 to 538 C (650 to 1000 F) to remove hydrogen sulfide (H{sub 2}S) from coal-derived fuel gases in a fluidized-bed reactor. The goal was to develop sorbents that are capable of reducing the H{sub 2}S level in the fuel gas to less than 20 ppmv in the specified temperature range and pressures in the range of 1 to 20 atmospheres, with chemical characteristics that permit cyclic regeneration over many cycles without a drastic loss of activity, as well as physical, characteristics that are compatible with the fluidized bed application. This topical report focuses on the investigation directed toward preparation of zinc-based sorbents using the sol-gel approach that has been shown to require only a moderate temperature for calcination, while resulting in significantly more attrition-resistant sorbents. The sorbents prepared in this part of the investigation and the results from their evaluation in packed-bed and fluidized-bed reactors are described in this report.
Date: January 1, 2000
Creator: Abbasian, Javad
System: The UNT Digital Library
CONTINUED DEVELOPMENT OF THE ROTARY COMBUSTOR FOR REFIRING PULVERIZED COAL BOILERS (open access)

CONTINUED DEVELOPMENT OF THE ROTARY COMBUSTOR FOR REFIRING PULVERIZED COAL BOILERS

The Rotary Combustor is a novel concept for burning coal with low SO{sub 2} and NO{sub x} emissions. It burns crushed coal in a fluid bed where the bed is maintained in a rotating drum by centripetal force. Since this force may be varied, the combustor may be very compact, and thus be a direct replacement for a p.c. burner on existing boilers. The primary objective of this project is to demonstrate that a typical industrial boiler can be refired with the modified prototype Rotary Combustor to burn Ohio high-sulfur coal with low emissions of SO{sub 2} and NO{sub x}. The primary problem that must be resolved to demonstrate sustained operations with coal is temperature control in the rotating fluid bed. The prototype Rotary Combustor was assembled and installed on the T-850P CNB boiler at the CONSOL Energy site in South Park, Pennsylvania. Several design improvements were investigated and implemented during the assembly to improve the prototype Rotary Combustor operations compared to prior tests at Detroit Stoker in Monroe, Michigan. An Operating Manual and Safety Review were completed. The shakedown test phase was initiated. Two major problems were initially encountered: binding of the rotating drum at operating temperatures, and reduced …
Date: November 1, 2000
Creator: Abbott, Murray F.; Mereb, Jamal B.; Hanson, Simon P. & Virr, Michael J.
System: The UNT Digital Library
Neutronic Benchmarks for the Utilization of Mixed-Oxide Fuel: Joint U.S./Russian Progress Report for Fiscal Year 1997 - Volume 4, Part 2--Saxton Plutonium Program Critical Experiments (open access)

Neutronic Benchmarks for the Utilization of Mixed-Oxide Fuel: Joint U.S./Russian Progress Report for Fiscal Year 1997 - Volume 4, Part 2--Saxton Plutonium Program Critical Experiments

Critical experiments with water-moderated, single-region PuO{sub 2}-UO{sub 2} or UO{sub 2}, and multiple-region PuO{sub 2}-UO{sub 2}- and UO{sub 2}-fueled cores were performed at the CRX reactor critical facility at the Westinghouse Reactor Evaluation Center (WREC) at Waltz Mill, Pennsylvania in 1965 [1]. These critical experiments were part of the Saxton Plutonium Program. The mixed oxide (MOX) fuel used in these critical experiments and then loaded in the Saxton reactor contained 6.6 wt% PuO{sub 2} in a mixture of PuO{sub 2} and natural UO{sub 2}. The Pu metal had the following isotopic mass percentages: 90.50% {sup 239}Pu; 8.57% {sup 239}Pu; 0.89% {sup 240}Pu; and 0.04% {sup 241}Pu. The purpose of these critical experiments was to verify the nuclear design of Saxton partial plutonium cores while obtaining parameters of fundamental significance such as buckling, control rod worth, soluble poison worth, flux, power peaking, relative pin power, and power sharing factors of MOX and UO{sub 2} lattices. For comparison purposes, the core was also loaded with uranium dioxide fuel rods only. This series is covered by experiments beginning with the designation SX.
Date: October 12, 2000
Creator: Abdurrahman, NM
System: The UNT Digital Library
Electricity: The Road Toward Restructuring (open access)

Electricity: The Road Toward Restructuring

This report talks about Electricity regulation and transmission issues. It also includes the history of the California Electricity Crisis.
Date: May 11, 2000
Creator: Abel, Amy & Parker, Larry
System: The UNT Digital Library
State-by-State Comparison of Selected Electricity Restructuring Provisions (open access)

State-by-State Comparison of Selected Electricity Restructuring Provisions

Since 1996, twenty-one states have restructured their electricity markets. While the extent of this restructuring varies by state, four issues have generally been considered by all state legislatures: stranded costs, aggregation, universal service, and public benefits. This report compares the treatment of these issues in the restructuring legislation of the twenty-one states. Using information collected directly from the relevant state laws and the rules promulgated by state public utility commissions, this report provides a state-by-state comparison of the restructuring provisions relating to the four issues.
Date: January 13, 2000
Creator: Abel, Amy & Shimabukuro, Jon O.
System: The UNT Digital Library
Ideas and concepts for diagnosis of performance and evaluation of data reliability based upon ARSA state-of-health (SOH) data (open access)

Ideas and concepts for diagnosis of performance and evaluation of data reliability based upon ARSA state-of-health (SOH) data

At the current time, the Pacific Northwest National Laboratory (PNNL) prototype for the Automated Radioxenon Sampler/Analyzer (ARSA) automatically transmits, on a daily basis, a subset of all state-of-health (SOH) data in an e-mail data file to a limited number of recipients. These variables represent what were considered the most critical physical parameters for the ARSA's operation at the beginning of the field demonstration in Freiburg, Germany. Operators at PNNL perform a daily review of the information in the data file for anomalous operational conditions as evidenced by sensor readings. The initial review is easily implemented by plotting the various sensor data versus time and looking for gross deviations in the periodicity of the variables compared to previous sample sensor data. After viewing the 24-hr graphical plots, if necessary, a review is conducted of the tabular data of specific sensor anomalies. In most cases, the experience has been that when there is an ARSA operational problem the data file will have multiple sensor readings that reflect some aspect of the problem.
Date: April 27, 2000
Creator: Abel, KH; Bowyer, TW; Hayes, JC; Heimbigner, TR; Panisko, ME; McIntyre, JI et al.
System: The UNT Digital Library
Ideas and Concepts for Diagnosis of Performance and Evaluation of Data Reliability Based Upon ARSA State-of-Health (SOH) Data (open access)

Ideas and Concepts for Diagnosis of Performance and Evaluation of Data Reliability Based Upon ARSA State-of-Health (SOH) Data

At the current time the Pacific Northwest National Laboratory (PNNL) prototype for the Automated Radioxenon Sampler/Analyzer (ARSA) automatically transmits, on a daily basis, a subset of all state-of-health (SOH) data in an e-mail data file to a limited distribution of participants.
Date: April 27, 2000
Creator: Abel, Keith H.; Bowyer, Ted W.; Hayes, James C.; Heimbigner, Tom R.; Panisko, Mark E.; McIntyre, Justin I. et al.
System: The UNT Digital Library
Drying Results of K-Basin Damaged/Corroded SNF Internal Sludge and Surface Coating (open access)

Drying Results of K-Basin Damaged/Corroded SNF Internal Sludge and Surface Coating

Experiments were performed using a thermogravimetric analysis (TGA) system by Pacific Northwest National Laboratory (PNNL)to study the drying behavior of the K-Basin spent nuclear fuel (SNF) internal sludge and two different surface coatings of SNF elements. These measurements were conducted in support of the safety and process analyses of the proposed Integrated Process Strategy (IPS) to move the N-Reactor fuel stored at K-Basin to an interim storage facility. These limited experiments on the corrosion products of K-Basin SNF material were part of the broad studies performed to ascertain the bounding pressurization of the Multi-Canister Overpack (MCO). Seven SNF internal sludge samples taken from different damage regions of three damaged/corroded outer K-Basin SNF elements were dried. Additionally, two surface coating samples taken from two SNF elements stored at K-West were tested. All the tests were performed in a vacuum atmosphere with the same temperature ramp rate of about 0.4 C/ min. Each TGA test sample was weighed before and after the test on a balance located in the Shielded Analytical Laboratory hot cell. The test samples were vacuum dried in the TGA system for about 24 hours prior to heating them at the rate of 0.4 C/min. The observations from the …
Date: September 21, 2000
Creator: Abrefah, J.; Alexander, D. L. & Marschman, S. C.
System: The UNT Digital Library