None

Air pollution arising from the emission of nitrogen oxides as a result of combustion taking place in boilers, furnaces and engines, has increasingly been recognized as a problem. New methods to remove NO{sub x} emissions significantly and economically must be developed. The current technology for post-combustion removal of NO is the selective catalytic reduction (SCR) of NO by ammonia or possibly by a hydrocarbon such as methane. The catalytic decomposition of NO to give N2 will be preferable to the SCR process because it will eliminate the costs and operating problems associated with the use of an external reducing species. The most promising decomposition catalysts are transition metal (especially copper)-exchanged zeolites, perovskites, and noble metals supported on metal oxides such as alumina, silica, and ceria. The main shortcoming of the noble metal reducible oxide (NMRO) catalysts is that they are prone to deactivation by oxygen. It has been reported that catalysts containing tin oxide show oxygen adsorption behavior that may involve hydroxyl groups attached to the tin oxide. This is different than that observed with other noble metal-metal oxide combinations, which have the oxygen adsorbing on the noble metal and subsequently spilling over to the metal oxide. This observation leads …

The ''Disposal Criticality Analysis Methodology Topical Report'' (YMP 2003) presents the methodology for evaluating potential criticality situations in the monitored geologic repository. As stated in the referenced Topical Report, the detailed methodology for performing the disposal criticality analyses will be documented in model reports. Many of the models developed in support of the Topical Report differ from the definition of models as given in the Office of Civilian Radioactive Waste Management procedure AP-SIII.10Q, ''Models'', in that they are procedural, rather than mathematical. These model reports document the detailed methodology necessary to implement the approach presented in the Disposal Criticality Analysis Methodology Topical Report and provide calculations utilizing the methodology. Thus, the governing procedure for this type of report is AP-3.12Q, ''Design Calculations and Analyses''. The ''Criticality Model'' is of this latter type, providing a process evaluating the criticality potential of in-package and external configurations. The purpose of this analysis is to layout the process for calculating the criticality potential for various in-package and external configurations and to calculate lower-bound tolerance limit (LBTL) values and determine range of applicability (ROA) parameters. The LBTL calculations and the ROA determinations are performed using selected benchmark experiments that are applicable to various waste forms …

This report provides information on selected privileges and courtesies (with the exception of federal health insurance, life insurance, and retirement benefits) extended to departing and former Senators. Some are derived from law and Senate Rules, but most are courtesies that have been extended as a matter of custom.

Genome features of the Bacillus cereus group genomes (representative strains of Bacillus cereus, Bacillus anthracis and Bacillus thuringiensis sub spp israelensis) were analyzed and compared with the Bacillus subtilis genome. A core set of 1,381 protein families among the four Bacillus genomes, with an additional set of 933 families common to the B. cereus group, was identified. Differences in signal transduction pathways, membrane transporters, cell surface structures, cell wall, and S-layer proteins suggesting differences in their phenotype were identified. The B. cereus group has signal transduction systems including a tyrosine kinase related to two-component system histidine kinases from B. subtilis. A model for regulation of the stress responsive sigma factor sigmaB in the B. cereus group different from the well studied regulation in B. subtilis has been proposed. Despite a high degree of chromosomal synteny among these genomes, significant differences in cell wall and spore coat proteins that contribute to the survival and adaptation in specific hosts has been identified.

The sources of the X-rays based on Compton scattering of intense Nd:YAG laser beam on electron beam circulating in a storage ring with beam energy 43-225 MeV is under construction in NSC KIPT. In the paper the progress in development and construction of Kharkov X-ray generator NESTOR is presented. The current status of the main facility system design and development are described. New scheme and main parameters of injection system are presented. The status of power supply system and control system is described. The facility is going to be in operation in the middle of 2007 and generated X-rays flux is expected to be of about 10{sup 13} phot/s.

The Monitored Geologic Repository (MGR) Waste Package Department of the Civilian Radioactive Waste Management System Management & Operating contractor (CRWMS M&O) performed calculations to provide input for disposal of spent nuclear fuel (SNF) from the Shippingport Light Water Breeder Reactor (LWBR) (Ref. 1). The Shippingport LWBR SNF has been considered for disposal at the potential Yucca Mountain site. Because of the high content of fissile material in the SNF, the waste package (WP) design requires special consideration of the amount and placement of neutron absorbers and the possible loss of absorbers and SNF materials over geologic time. For some WPs, the outer shell corrosion-resistant material (CRM) and the corrosion-allowance inner shell may breach (Refs. 2 and 3), allowing the influx of water. Water in the WP will moderate neutrons, increasing the likelihood of a criticality event within the WP; and the water may, in time, gradually leach the fissile components and neutron absorbers from the WP, further affecting the neutronics of the system. This study presents calculations of the long-term geochemical behavior of WPs containing a Shippingport LWBR SNF seed assembly, and high-level waste (HLW) glass canisters arranged according to the codisposal concept (Ref. 4). The specific study objectives were …

We study the e+e- --> Lambda anti-Lambda gamma, Lambda anti-Sigma0 gamma, Sigma0 anti-Sigma0 gamma processes using 230 fb-1 of integrated luminosity collected by the BaBar detector at e+e- center-of-mass energy of 10.58 GeV. From the analysis of the baryon-antibaryon mass spectra the cross sections for e+e- --> Lambda anti-Lambda, Lambda anti-Sigma0, Sigma0 anti-Sigma0 are measured in the dibaryon mass range from threshold up to 3 GeV/c{sup 2}. The ratio of electric and magnetic form factors, |G{sub E}/G{sub M}|, is measured for e+e- --> Lambda anti-Lambda, and limits on the relative phase between Lambda form factors are obtained. We also measure the J/psi --> Lambda anti-Lambda, Sigma0 anti-Sigma0 and psi(2S) --> Lambda anti-Lambda branching fractions.

We present measurements of the semileptonic decays B{sup -} {yields} D{sup 0}{tau}{sup -}{bar {nu}}{sub {tau}}, B{sup -} {yields} D{sup *0}{tau}{sup -}{bar {nu}}{sub {tau}}, B{sup -} {yields} D{sup +}{tau}{sup -}{bar {nu}}{sub {tau}}, and B{sup -} {yields} D{sup *+}{tau}{sup -}{bar {nu}}{sub {tau}}, which are potentially sensitive to non-Standard Model amplitudes, The data sample comprises 232 x 10{sup 6} {Upsilon}(4s) {yields} B{bar B} decays collected with the BABAR detector. From a combined fit to B{sup -} and {bar B}{sup 0} channels, we obtain the branching fractions {beta}(B {yields} D{sub {tau}}{sup -}{bar {nu}}{sub {tau}}) = (0:86 {+-} 0:24 {+-} 0:11 {+-} 0:06)% and {beta}(B {yields} D*{tau}{sup -}{bar {nu}}{sub {tau}}) = (1:62 {+-} 0:31 {+-} 0:10 {+-} 0:05)% (normalized for the {bar B}{sup 0}), , where the uncertainties are statistical, systematic, and normalization-mode-related.

The kinetics of hydroxide film growth on LiD have been studied by the thermogravimetric method in nitrogen saturated with water vapor and by scanning electron microscopy (SEM) of samples that have been exposed to air with 50% relative humidity. The reaction probability is estimated to be 4 x 10{sup -7} for LiD exposed to ambient air with 50% relative humidity, suggesting that the diffusion through the hydroxide film is not the limiting step on the overall process at high moisture levels. The rate of growth is drastically reduced when the temperature is increased to 60 C.

We review the application of effective operator formalism to the ab initio no core shell model (NCSM). For short-range operators, such as the nucleon-nucleon potential, the unitary-transformation method works extremely well at the two-body cluster approximation and good results are obtained for the binding energies and excitation spectra of light nuclei (A {<=} 16). However, for long-range operators, such as the radius or the quadrupole moment, performing this unitary transformation at the two-body cluster level, does not include the higher-order correlations needed to renormalize these long-range operators adequately. Usually, such correlations can be obtained either by increasing the order of the cluster approximation, or by increasing the model space. We will discuss the difficulties of these approaches as well as alternate possible solutions for including higher-order correlations in small model spaces.

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989 and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that …

Absolute partial {gamma}-ray cross sections for production of discrete {gamma} rays in the {sup 239}Pu(n,2n{gamma}i){sup 238}Pu reaction have been measured. The experiments were performed at LANSCE/WNR on the 60R flight line. Reaction {gamma}-rays were measured using the large-scale Compton-suppressed array of Ge detectors, GEANIE. The motivation for this experiment, an overview of the partial {gamma}-ray cross-section measurement, and an introduction to the main experimental issues will be presented. The energy resolution of the Ge detectors allowed identification of reaction {gamma} rays above the background of sample radioactivity and fission {gamma} rays. The use of planar Ge detectors with their reduced sensitivity to neutron interactions and improved line shape was also important to the success of this experiment. Absolute partial {gamma}-ray cross sections are presented for the 6{sub 1}{sup +} {yields} 4{sub 1}{sup +} member of the ground state rotational band in {sup 238}Pu, together with miscellaneous other {gamma}-ray partial cross sections. The n,2n reaction cross section shape and magnitude as a function of neutron energy was extracted from these partial cross sections using nuclear modeling (enhanced Hauser-Feshbach) to relate partial {gamma}-ray cross sections to the n,2n cross section. The critical nuclear modeling issue is the ratio of a partial cross …

We point out that current experimental data for partial B {yields} {pi}l{nu} branching fractions reduce the theoretical input required for a precise extraction of |V{sub ub}| to the form-factor normalization at a single value of the pion energy. Different parameterizations of the form factor shape leading to this conclusion are compared and the role of dispersive bounds on heavy-to-light form factors is clarified.

This project focused on the use of Logistical Networking technology to address the challenges involved in rapid sharing of data from the the Center's gyrokinetic particle simulations, which can be on the order of terabytes per time step, among researchers at a number of geographically distributed locations. There is a great need to manage data on this scale in a flexible manner, with simulation code, file system, database and visualization functions requiring access. The project used distributed data management infrastructure based on Logistical Networking technology to address these issues in a way that maximized interoperability and achieved the levels of performance the required by the Center's application community. The work focused on the development and deployment of software tools and infrastructure for the storage and distribution of terascale datasets generated by simulations running at the National Center for Computational Science at Oak Ridge National Laboratory.

This report briefly discusses programs designed to provide income support, price support, and/or supply management for approximately 20 specified agricultural commodities. USDA farm support programs represent the heart of U.S. farm policy, by virtue of their longevity – they have existed since the early 1930s – and their cost.

Elastic constants for tantalum single crystals have been calculated by Orlikowski, et al. [1] for a broad range of temperatures and pressures. These moduli can be utilized directly in continuum crystal simulations or dislocation dynamics calculations where the individual grains of the polycrystalline material are explicitly represented. For simulations on a larger size scale, the volume of material represented by the quadrature points of the simulation codes includes many grains, and average moduli are needed. Analytic bounding and averaging schemes exist, but since these do not account for nonuniform stress and strain within the interacting grains, the upper and lower bounds tend to diverge as the crystal anisotropy increases. Local deformation and stress equilibrium accommodate the anisotropic response of the individual grains. One method of including grain interactions in shear modulus averaging calculations is through a highly-descretized finite element model of a polycrystal volume. This virtual test sample (VTS) can be probed to determine the average response of the polycrystal. The desire to obtain isotropic moduli imposes attributes on the VTS. The grains should be equiax and the crystal orientation distribution function should be random. For these simulations, a cube, 300 {micro}m on a side, was discretized with 1 million …

The dissolution of polymers in supercritical carbon dioxide was measured using in-situ ultraviolet absorbance. This research was carried out to provide data to support the development of a new process to produce plastic-bonded explosive molding powder. Estane 5703, the polymer used to bind PBX 9501, was insoluble at the tested conditions. The dissolution of Kraton FG 1901 was tested at 27 to 100{degrees}C and 29 to 65 MPa. Only a small fraction of this polymer dissolved, and the quantity that dissolved increased with the polymer sample size. The tested polymer was polydisperse, and it is thought that the lowest molecular weight fraction of the polymer preferentially dissolved. Based on this observation, dissolution of the polymer prior to molding powder synthesis is recommended to obtain a uniform molding powder product. The dissolution of nearly monodisperse samples of polyethylacrylate were tested at 27 to 90{degrees}C and 10 to 65 MPa. The resulting solutions were very dilute, on the order of 100 mg/liter, and the solutions did not reach saturation during the 90 hour test period. The slow approach to saturation indicates that mass transfer rates may significantly affect process performance.

In most cases, nonlinearities from magnets must be properly included in tracking and analysis to properly compute quantities of interest, in particular chromatic properties and dynamic aperture. One source of nonlinearities in magnets that is often important and cannot be avoided is the nonlinearity arising at the end of a magnet due to the longitudinal variation of the field at the end of the magnet. Part of this effect is independent of the longitudinal of the end. It is lowest order in the body field of the magnet, and is the result of taking a limit as the length over which the field at the end varies approaches zero. This is referred to as a ''hard edge'' end field. This effect has been computed previously to lowest order in the transverse variables. This paper describes a method to compute this effect to arbitrary order in the transverse variables, under certain constraints.

Fixed Field Gradient (FFAG) accelerators are a promising idea for reducing the cost of acceleration for muon accelerators as well as other machines. This paper presents an automated method for designing these machines to certain specifications, and uses that method to find a minimum cost design. The dependence of this minimum cost on various input parameters to the system is given. The impact of the result on an FFAG design for muon acceleration is discussed.

In specifying the magnets for an accelerator, one must be able to determine the aperture required by the beam. In some machines, in particular FFAGs, there is a significant variation in the closed orbit and beta functions over the energy range of the machine. In addition, the closed orbit and beta functions may vary with the longitudinal position in the magnet. It is necessary to determine a magnet aperture which encloses the beam ellipses at all energies and all positions in the magnet. This paper describes a method of determining the smallest circular aperture enclosing an arbitrary number of midplane-centered ellipses.

None

This report provides current statistical information, profiles the Afghanistan narcotics trade's participants, explores linkages between narcotics, insecurity, and corruption, and reviews U.S. and international policy responses since late 2001. The report also considers ongoing policy debates regarding the counternarcotics role of coalition military forces, poppy eradication, alternative livelihoods, and funding issues for Congress.

In a coordinated effort, the Department of Transportation (DOT) and Nuclear Regulatory Commission (NRC) proposed the elimination of the Specification Packaging from 49 CFR 173.[1] In accordance with the Federal Register, issued on October 1, 2004, new fabrication of Specification Packages would no longer be authorized. In accordance with the NRC final rulemaking published January 26, 2004, Specification Packagings are mandated by law to be removed from service no later than October 1, 2008. This coordinated effort and resulting rulemaking initiated a planned phase out of Specification Type B and Type A fissile (F) material transportation packages within the Department of Energy (DOE) and its subcontractors. One of the Specification Packages affected by this regulatory change is the UN1A2 Specification Package, per DOT 49 CFR 173.417(a)(6). To maintain continuing shipments of DOE materials currently transported in UN1A2 Specification Package after the existing authorization expires, a replacement Type A(F) material packaging design is under development by the Savannah River National Laboratory. This paper presents a summary of the prototype design effort and testing of the new Type A(F) Package development for the DOE. This paper discusses the progress made in the development of a Type A Fissile Packaging to replace the …