None

Multicharged, pure, high current and pulsed ion beams of Zr have been extracted from a metal vapor vacuum arc (MEVVA) source and implanted into AISI D3 (C: 2-2,35%, Mn: 0,60%, Si: 0,60%, Cr: 11-13,50%, Ni: 0,30%, W: 1%, V: 1%) tool steel samples at the 3,6.1016, 5.1016 and 1.1017 ions/cm2 doses. The wear resistance and friction coefficient have been estimated using pin-on-disc wear tests. Implantation of Zr decreased the wear loss and friction coefficient. RBS, AES and SEM Microprobe analyses were used as a guide for explanation of implantation's effects.

Simultaneous removal of SO{sub 2} and NO{sub x} using a regenerable solid sorbent will constitute an important improvement over the use of separate processes for the removal of these two pollutants from stack gases and possibly eliminate several shortcomings of the individual SO{sub 2} and NO{sub x} removal operations. The work done at PETC and the DOE-funded investigation of the investigators on the sulfation and regeneration of alumina-supported cerium oxide sorbents have shown that they can perform well at relatively high temperatures (823-900 K) as regenerable desulfurization sorbents. Survey of the recent literature shows that addition of copper oxide to ceria lowers the sulfation temperature of ceria down to 773 K, sulfated ceria-based sorbents can function as selective SCR catalysts even at elevated temperatures, SO{sub 2} can be directly reduced to sulfur by CO on CuO-ceria catalysts, and ceria-based catalysts may have a potential for selective catalytic reduction of NO{sub x} by methane. These observations indicate a possibility of developing a ceria-based sorbent/catalyst which can remove both SO{sub 2} and NO{sub x} from flue gases within a relatively wide temperature window, produce significant amounts of elemental sulfur during regeneration, and use methane for the selective catalytic reduction of NO{sub x}.

This report summaries the computer modeling studies and how the results of these studies were used to estimate contaminant releases to the groundwater. These modeling studies were used to improve saltstone landfill designs and are the basis for the current reference design. With the reference landfill design, EPA Drinking Water Standards can be met for all chemicals and radionuclides contained in Savannah River Plant waste salts.

Today's manufacturing systems and equipment must perform at levels thought impossible a decade ago. Companies must push operations, quality, and efficiencies to unprecedented levels while holding down costs. In this new economy, companies must be concerned with market shares, equity growth, market saturation, and profit. U.S. manufacturing is no exception and is a prime example of businesses forced to adapt to constant and rapid changes in customer needs and product mixes, giving rise to the term ''Agile Manufacturing''. The survival and ultimate success of the American Manufacturing economy may depend upon its ability to create, innovate, and quickly assess the impact that new innovations will have on its business practices. Given the need for flexibility, companies need proven methods to predict and measure the impact that new technologies and strategies will have on overall plant performance from an enterprise perspective. The Value-Derivative Model provides a methodology and approach to assess such impacts in terms of energy savings, production increases, quality impacts, emission reduction, and maintenance and operating costs as they relate to enabling and emerging technologies. This is realized by calculating a set of first order sensitivity parameters obtained from expanding a Taylor Series about the system's operating point. These …

Fluorescence from phosphor coatings is the basis of an established technique for measuring temperature in a wide variety of turbine and combustion engine applications. Example surfaces include blades, vanes, combustors, intake valves, pistons, and rotors. Many situations that are remote and noncontact require the high intensity of a laser to illuminate the phosphor, especially if the surface is moving. Thermometric resolutions of 0.1 C are obtainable, and some laboratory versions of these systems have been calibrated against NIST standards to even higher precision. To improve the measurement signal-to-noise ratio, synchronous detection timing has been used to repeatedly interrogate the same blade in a high speed rotating turbine. High spatial resolution can be obtained by tightly focusing the interrogation beam in measurements of static surfaces, and by precise differential timing of the laser pulses on rotating surfaces. We report here the use of blue light emitting diodes (LEDs) as a n illumination source for producing useable fluorescence from phosphors for temperature measurements. An LED can excite most of the same phosphors used to cover the temperature range from 8 to 1400 C. The advantages of using LEDs are obvious in terms of size, power requirements, space requirements and cost. There can …

This report identifies the committee assignments, dates of service, and (for Representatives) districts of the 209 women Members of Congress.

Vacuum arc ion sources are known for delivering high currents of metal ion beams. By Langmuir probe and Faraday cup measurements it is shown that fluctuations of the ion beam current are due to the fluctuations of plasma density which in turn are due to the explosive nature of plasma production at cathode spots. Humphries and co-workers and later Oks and co-workers have shown that beam fluctuations can be reduced by inserting biased meshes in the plasma. Here, the idea of ion extraction at kV-level with post-acceleration is investigated. The high voltage allows us to use coarse, ridged meshes or grids. The combination of an extractor operating in the overdense plasma regime with post-acceleration lead to very reproducible, practically ''noiseless'' ion beams however at the expense of low ion current density. The noise reduction is due to ion optics effects. Although the current setup is not suitable for a heavy ion fusion injector due to the low beam current and the risk of extractor voltage breakdown, further development of the concept may lead to reproducible beam pulses of sufficiently high current and brightness.

None

The Ion Doppler Spectrometer instrument on the Sustained Spheromak Physics experiment is described, along with background about it's operation. Results are presented from recent experimental runs, and the data is compared to the results of simple statistical models of heat exchange in two species gasses.

Program demonstration and user instructions are presented for FabryVB5. This computer program was created for use in analyzing Fabry-Perot interferometer records that detail the velocity time histories of fast moving surfaces. Graphical curves representing peak fringe positions and fiducial timing dots are extracted from a digitized film record or from a CCD digital image. An analysis is demonstrated on a sample velocimeter record along with some mathematical formula and routine operations. Routines used to analyze calibration records on streak camera distortions are illustrated in an appendix. This is a Microsoft Visual Basic{trademark} version for the PC.

None

Computed tomography (CT) has long been used by industry as a non-destructive evaluation technique for discovering flaws in parts before their use. Traditional linear array computed tomography systems acquired data at a rate that could be reconstructed simultaneously with data acquisition. With new area detectors, the data rate of acquisition has increased exponentially, and the reconstruction algorithm does not scale linearly with increased data. FlashCT DPS (Flat Panel Amorphous Silicon High Resolution Computed Tomography, Data Processing System) is a software package developed by M. Sheats, and A. Davis at LANL to meet the data processing demands of new flat panel array computed tomography. FlashCT--DPS combines several features unique to industrial computed tomography systems. It addresses traditional usability problems by providing an intuitive graphical user interface and powerful analysis tools. It includes the three major CT reconstruction algorithms: parallel backprojection, fan beam resorting, and Feldkamp cone beam. It also provides visualization tools for examination of data after processing. Finally, it is able to perform distributed data reconstruction with a near linear speed increase as a function of the number of processors used. Additionally, utility programs have been developed to support project editing and computing cluster management for the FlashCT system. FlashCT--DPS …

Measurements of temperature and position were collected during the night from an instrumented van on routes through Salt Lake City and the rural outskirts. The measurements were taken as part of the Department of Energy Chemical and Biological National Security Program URBAN 2 Field Experiment conducted in October 2000 (Shinn et al., 2000 and Allwine et al., 2001a). The instrumented van was driven over three primary routes, two including downtown, residential, and ''rural'' areas and a third that went by a line of permanently fixed temperature probes (Allwine et al., 2001b) for cross-checking purposes. Each route took from 45 to 60 minutes to complete. Based on four nights of data, initial analyses indicate that there was a temperature difference of 2-5 C between the urban core and nearby ''rural'' areas. Analyses also suggest that there were significant fine scale temperature differences over distances of tens of meters within the city and in the nearby rural areas. The temperature measurements that were collected are intended to supplement the meteorological measurements taken during the URBAN2000 Field Experiment, to assess the importance of the urban heat island phenomenon in Salt Lake City, and to test the urban canopy parameterizations that have been developed …

None

X-ray sources in the 3-7 keV energy regime can be produced by laser-irradiating mid- and high-Z gas-filled targets with high-powered lasers. A series of experiments have been performed using underdense targets that are supersonically heated with {approx} 35 kJ of 0.35 {micro}m laser light. These targets were cylindrical Be enclosures that were filled with 1-2 atms of Xe or Ar gas. L-shell x-ray emission is emitted from the plasma and detected by Bragg crystal spectrometers and x-ray diodes. Absolute flux measurements show conversion efficiencies of {approx} 10% in the multi-kilovolt x-ray emission. These sources can be used as bright x-ray backlighters or for material testing.

None

There were 5 laser experiments conducted to date in FY-01 under the ongoing project to study the response of single crystal fcc materials under shock compression. An additional 10 laser shots are planned for August, 2001. This work has focused on developing capability to record diffraction from multiple lattice planes during the passage of a shock through a thin foil of single crystal copper, while simultaneously performing separate shock sample recovery experiments to study the residual deformation structure in the recovered samples.

Palladium used at Savannah River (SR) for process tritium storage is currently obtained from a commercial source. In order to understand the processes involved in preparing this material, SR is supporting investigations into the chemical reactions used to synthesize this material. The material specifications are shown in Table 1. An improved understanding of the chemical processes should help to guarantee a continued reliable source of Pd in the future. As part of this evaluation, a work-for-others contract between Westinghouse Savannah River Company and Ames Laboratory (AL) was initiated. During FY98, the process for producing Pd powder developed in 1986 by Dan Grove of Mound Applied Technologies, USDOE (the Mound muddy water process) was studied to understand the processing conditions that lead to changes in morphology in the final product. During FY99 and FY00, the process for producing Pd powder that has been used previously at Sandia and Los Alamos National Laboratories (the Sandia/LANL process) was studied to understand the processing conditions that lead to changes in the morphology of the final Pd product. During FY01, scale-up of the process to batch sizes greater than 600 grams of Pd using a 20-gallon Pfaudler reactor was conducted by the Iowa State University …

This report explores the authority of BLM personnel regarding unauthorized cattle by reviewing the statutory authorities of BLM over the federal rangelands under its administration, and the regulations and administrative materials implementing those authorities in the context of grazing, trespass, impoundment and sale of unauthorized livestock.

Gravitinos with a mass in the keV range are an interesting candidate for warm dark matter. Recent measurements of the matter density of the universe and of cosmic structures at the dwarf galaxy scale rule out the simplest gravitino models with thermal freeze-out. We construct a model where the decay of the messenger particles that transmit the supersymmetry breaking to the observable sector generates the required entropy to dilute the gravitino relic density by the required factor of a few to come in line with observations. The model is natural, and requires only that the coupling of the messenger sector to the standard model be set so that the decay happens at the appropriate time.

One of the least controversial provisions of the Energy Policy and Conservation Act of 1975 (P.L. 94-163) established corporate average fuel economy (CAFE) standards for new passenger cars. This report presents a brief background and analysis regarding the price of crude oil that brought into sharp focus the fuel inefficiency of U.S. automobiles. The report also discusses the previous issues and the most recent developments regarding CAFE.

The Bush Administration issued its plan for a national energy policy on May 16, 2001. Comprehensive energy legislation was introduced in the Senate by both parties by late March (S. 388, S. 389, S. 596, S. 597). Bills reported by several House committees (H.R. 2436, H.R. 2460, H.R. 2511, and H.R. 2587) were combined in a single bill, H.R. 4, passed by the House, August 1, 2001. The bill includes provisions that would require a reduction in light-duty truck and SUV fuel consumption, and would open the Arctic National Wildlife Refuge (ANWR) to leasing.

The Bush Administration outlined its proposals for addressing the nation’s energy problems in May 2001 with a 170-page report by the National Energy Policy Development Group (NEPD) titled National Energy Policy (NEP). In June, the President transmitted to Congress a summation of the report’s concepts and strategies that call for legislative action.