There are 3 types of REWDC container types listed. Type 1 is used for long term storage of conditions waste. It's made of steel and it's a 55-gallon galvanized drum with a 90 mil HDPE liner. Type 2 is used for solid waste, point of generation and short term storage. It can be made of steel or poly. They come in 2-gallon, 5-gallon, 30-gallon, and 55-gallon drums used with 4 mil polyethylene liner. Type 3 is used for liquid waste. It can be made of steel or poly. It comes in 2-gallon, 5-gallon, 30-gallon, or 55-gallon drums. They have a closed head.

The Grant DE-FG-02-00ER54712, ?Experimental Studies of Collisionless Reconnection Processes in Plasmas?, financed within the DoE/NSF, spanned a period from September , 2003 to August, 2007. It partly supported an MIT Research scientist, two graduate students and material expenses. The grant enabled the operation of a basic plasma physics experiment (on magnetic reconnection) at the MIT Plasma Science and Fusion Center and the MIT Physics Department. A strong educational component characterized this work throughout, with the participation of a large number of graduate and undergraduate students and interns to the experimental activities. The study of the collisionless magnetic reconnection constituted the primary work carried out under this grant. The investigations utilized two magnetic configurations with distinct boundary conditions. Both configurations were based upon the Versatile Toroidal Facility (VTF). The first configuration is characterized by open boundary conditions where the magnetic field lines interface directly with the vacuum vessel walls. The reconnection dynamics for this configuration has been methodically characterized and it has been shown that kinetic effects related to trapped electron trajectories are responsible for the high rates of reconnection observed [7]. This type of reconnection has not been investigated before. Nevertheless, the results are directly relevant to observations by the …

Questions addressed under this grant shared the common hypothesis that plant and ecosystem performance will positively respond to the augmentation of the most limiting resources to plant growth in the Mojave Desert, e.g., water and nitrogen. Specific hypothesis include (1) increased summer rainfall will significantly increase plant production thorugh an alleviation of moisture stress in the dry summer months, (2) N-deposition will increase plan production in this N-limited system, particularly in wet years or in concert with added summer rain, and (3) biological crust disturbance will gradually decrease bio-available N, with concomitant long-term reductions in photosynthesis and ANPP. Individual plan and ecosystem responses to global change may be regulated by biogeochemical processes and natural weather variability, and changes in plant and ecosystem processes may occur rapidly, may occur only after a time lag, or may not occur at all. During the first PER grant period, we observed changes in plant and ecosystem processes that would fall under each of these time-response intervals: plant and ecosystem processes responded rapidly to added summer rain, whereas most processes responded slowly or in a lag fashion to N-deposition and with no significant response to crust disturbance. Therefore, the primary objectives of this renewal grant …

Our work developed a unique set of in vivo spectroscopic tools that have allowed us to probe the importance of 1) The effects of storage of proton motive force (pmf ) in the form of both electric field (Δψ) and pH difference (ΔpH); 2) alteration in the stoichiometry of proton pumping to electron transfer at key steps; 3) the influence of changes in the conductivity for proton efflux from the thylakoid of the ATP synthase; 4) the mechanisms of steps of the electron transfer process that pump protons; and 5) the mechanisms by which reactive O{sub 2} is generated as a side reaction to photosynthesis, and how these processes are minimized.

The VisPort visualization portal is an experiment in providing Web-based access to visualization functionality from any place and at any time. VisPort adopts a service-oriented architecture to encapsulate visualization functionality and to support remote access. Users employ browser-based client applications to choose data and services, set parameters, and launch visualization jobs. Visualization products – typically images or movies – are viewed in the user’s standard Web browser. VisPort emphasizes visualization solutions customized for specific application communities. Finally, VisPort relies heavily on XML, and introduces the notion of visualization informatics -“ the formalization and specialization of information related to the process and products of visualization.

None

None

Our long-term vision is for a comprehensive and fundamental understanding of a critical gas-surface reaction, nano-oxidation— from the adsorption of oxygen atoms on the metal surface to the coalescence of the bulk oxide—via coordinated multi-scale theoretical and in situ experimental efforts. Reaching this goal necessitates close collaborations between theorists and experimentalists, and the development and utilization of unique and substantial theoretical and experimental tools. Achievement of this goal will be a major breakthrough in dynamic surface/interface reactions that will dramatically impact several scientific fields. Many of these are of interest to DOE, such as thin films and nanostructures that use oxidation for processing, heteroepitaxy, oxidation and corrosion, environmental stability of nano-devices, catalysis, fuel cells and sensors. The purpose of this specific DOE program was the support for the theoretical effort. Our focus for the first round of funding has been the development of a Kinetic Monte Carlo (KMC) code to simulate the complexities of oxygen interactions with a metal surface. Our primary deliverable is a user-friendly, general and quite versatile KMC program, called Thin Film Oxidation (TFOx). TFOx-2D presently simulates the general behavior of irreversible 2-dimensional nucleation and growth of epitaxial islands on a square or rectangular lattice. The TFOx …

The initial goal of this research program was to model and to simulate phase transformations in systems containing diffusion barriers. The modeling work included the development and testing of code to describe mass flow, the kinetics of phase formation, elastic deformation, and subsequent microstructural evolution occurring during interdiffusion. The primary simulation tools to be used were a class of diffuse interface methods described by the Cahn-Hilliard and phase field equations for the temporal and spatial evolution of the composition and deformation fields and other relevant phase variables. One-dimensional analytical solutions were also to be developed both to test the numerical methods and to establish connections to physical systems. During the early stages of the research program, two new areas of research related to systems with diffusion barriers were identified. The first area concerned phase formation and diffusional phase transformations in reacting systems subject to high electric current densities. Such high-current environments are common in lead-free solders, for example, and have important technological applications. The second area was an offshoot of the present work, and concerned theoretical modeling of phase evolution and cyclical amorphization of metallic alloys during ball milling.

A study was performed to validate the existing tools for fast reactor neutronics analysis against previous critical experiments. The six benchmark problems for the ZPPR-21 critical experiments phases A through F specified in the Handbook of Evaluated Criticality Safety Benchmark Experiments were analyzed. Analysis was also performed for three loading configurations of the ZPPR-15 Phase A experiments. As-built core models were developed in XYZ geometries using the reactor loading records and drawer master information. Detailed Monte Carlo and deterministic transport calculations were performed, along with various modeling sensitivity analyses. The Monte Carlo simulations were carried out with the VIM code with continuous energy cross sections based on the ENDF/B-V.2 data. For deterministic calculations, region-dependent 230-group cross sections were generated using the ETOE-2/MC-2/SDX code system, again based on the ENDF/B-V.2 data. Plate heterogeneity effects were taken into account by SDX unit cell calculations. Core calculations were performed with the TWODANT discrete ordinate code for the ZPPR-21 benchmarks, and with the DIF3D nodal transport option for the ZPPR-15 experiments. For all six ZPPR-21 configurations where the Pu-239 concentration varies from 0 to 49 w/o and the U-235 concentration accordingly varies from 62 to 0 w/o, the core multiplication factor determined with a …

Standoff detection and characterization of chemical plumes using Frequency Modulated Differential Absorption Lidar (FM-DIAL) is a promising technique for the detection of nuclear proliferation activities. For the last several years Pacific Northwest National Laboratory (PNNL) has been developing an FM-DIAL based remote sensing system as part of PNNL's Infrared Sensors project within NA-22's Enabling Technologies portfolio. In FY06 the remote sensing effort became a stand-alone project within the Plutonium Production portfolio with the primary goal of transitioning technology from the laboratory to the user community. Current systems remotely detect trace chemicals in the atmosphere over path lengths of hundreds of meters for monostatic operation (without a retro-reflector target) and up to ten kilometers for bistatic operation (with a retro-reflector target). The FM-DIAL sensor is sensitive and highly selective for chemicals with narrow-band absorption features on the order of 1-2 cm-1; as a result, the FM-DIAL sensors are best suited to simple di-atomic or tri-atomic molecules and other molecules with unusually narrow absorption features. A broadband sensor is currently being developed. It is designed to detect chemicals with spectral features on the order of several 10s of wavenumbers wide. This will expand the applicability of this technology to the detection of …

Ferritic stainless steels are promising candidates for IT-SOFC interconnect applications due to their low cost and resistance to oxidation at SOFC operating temperatures. However, several challenges remain, including long term electrical conductivity and surface stability under interconnect exposure conditions and chromia scale evaporation. One means of extending interconnect lifetime and improving performance is to apply a protective coating, such as (Mn,Co)3O4 spinel, to the cathode side of the interconnect. These coatings have proven effective in reducing scale growth kinetics and Cr volatility. This report describes several procedures developed at PNNL for fabricating (Mn,Co)3O4 spinel coatings onto ferritic stainless steels.

MTCI/StoneChem developed a steam reforming, fluidized bed gasification technology for biomass. DOE supported the demonstration of this technology for gasification of spent wood pulping liquor (or 'black liquor') at Georgia-Pacific's Big Island, Virginia mill. The present pre-commercial R&D project addressed the opportunities as well as identified negative aspects when the MTCI/StoneChem gasification technology is integrated in a pulp mill production facility. The opportunities arise because black liquor gasification produces sulfur (as H{sub 2}S) and sodium (as Na{sub 2}CO{sub 3}) in separate streams which may be used beneficially for improved pulp yield and properties. The negative aspect of kraft black liquor gasification is that the amount of Na{sub 2}CO{sub 3} which must be converted to NaOH (the so called causticizing requirement) is increased. This arises because sulfur is released as Na{sub 2}S during conventional kraft black liquor recovery, while during gasification the sodium associated Na{sub 2}S is partly or fully converted to Na{sub 2}CO{sub 3}. The causticizing requirement can be eliminated by including a TiO{sub 2} based cyclic process called direct causticization. In this process black liquor is gasified in the presence of (low sodium content) titanates which convert Na{sub 2}CO{sub 3} to (high sodium content) titanates. NaOH is formed when …

In support of technology development to utilize coal for efficient, affordable, and environmentally clean power generation, the Power Systems Development Facility (PSDF), located in Wilsonville, Alabama, routinely demonstrates gasification technologies using various types of coal. The PSDF is an engineering scale demonstration of key features of advanced coal-fired power systems, including a Transport Gasifier, a hot gas particulate control device (PCD), advanced syngas cleanup systems, and high-pressure solids handling systems. This report summarizes the results of the first demonstration of gasification operation with lignite coal following the 2006 gasifier configuration modifications. This demonstration took place during test campaign TC21, occurring from November 7, 2006, through January 26, 2007. The test campaign began with low sodium lignite fuel, and after 304 hours of operation, the fuel was changed to high sodium lignite, for 34 additional hours of operation. Both fuels were from the North Dakota Freedom mine. Stable operation with low sodium lignite was maintained for extended periods, although operation with high sodium lignite was problematic due to agglomeration formation in the gasifier restricting solids circulation.

Thin (3-40 ft thick), heterogeneous, limestone and dolomite reservoirs, deposited in shallow-shelf environments, represent a significant fraction of the reservoirs in the U.S. midcontinent and worldwide. In Kansas, reservoirs of the Arbuckle, Mississippian, and Lansing-Kansas City formations account for over 73% of the 6.3 BBO cumulative oil produced over the last century. For these reservoirs basic petrophysical properties (e.g., porosity, absolute permeability, capillary pressure, residual oil saturation to waterflood, resistivity, and relative permeability) vary significantly horizontally, vertically, and with scale of measurement. Many of these reservoirs produce from structures of less than 30-60 ft, and being located in the capillary pressure transition zone, exhibit vertically variable initial saturations and relative permeability properties. Rather than being simpler to model because of their small size, these reservoirs challenge characterization and simulation methodology and illustrate issues that are less apparent in larger reservoirs where transition zone effects are minor and most of the reservoir is at saturations near S{sub wirr}. These issues are further augmented by the presence of variable moldic porosity and possible intermediate to mixed wettability and the influence of these on capillary pressure and relative permeability. Understanding how capillary-pressure properties change with rock lithology and, in turn, within transition zones, …

None

While thermochemical syngas production facilities for biomass utilization are already employed worldwide, exploitation of their potential has been inhibited by technical limitations encountered when attempting to obtain real-time syngas compositional data required for process optimization, reliability, and syngas quality assurance. To address these limitations, the Gas Technology Institute (GTI) carried out two companion projects (under US DOE Cooperative Agreements DE-FC36-02GO12024 and DE-FC36-03GO13175) to develop and demonstrate the equipment and methods required to reliably and continuously obtain accurate and representative on-line syngas compositional data. These objectives were proven through a stepwise series of field tests of biomass and coal gasification process streams. GTI developed the methods and hardware for extractive syngas sample stream delivery and distribution, necessary to make use of state-of-the-art on-line analyzers to evaluate and optimize syngas cleanup and conditioning. The primary objectives of Cooperative Agreement DE-FC36-02GO12024 were the selection, acquisition, and application of a suite of gas analyzers capable of providing near real-time gas analyses to suitably conditioned syngas streams. A review was conducted of sampling options, available analysis technologies, and commercially available analyzers, that could be successfully applied to the challenging task of on-line syngas characterization. The majority of thermochemical process streams comprise multicomponent gas mixtures that, …

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is crucial in meeting the needs of these new markets. To address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance the operational flexibility and deliverability of the nation's gas storage system, and provide a cost-effective, safe, …

The large-scale Galactic interstellar radiation field (ISRF) is the result of stellar emission and dust re-processing of starlight. Where the energy density of the ISRF is high (e.g., the Galactic Centre), the dominant {gamma}-ray emission in individual supernova remnants (SNRs), such as G0.9+0.1, may come from inverse Compton (IC) scattering of the ISRF. Several models of the ISRF exist. The most recent one, which has been calculated by us, predicts a significantly higher ISRF than the well used model of Mathis, Mezger, and Panagia [1]. However, comparison with data is limited to local observations. Based on our current estimate of the ISRF we predict the gamma-ray emission in the SNRs G0.9+0.1 and RXJ1713, and pair-production absorption features above 20 TeV in the spectra of G0.9+0.1, J1713-381, and J1634-472. We discuss how GLAST, along with current and future very high energy instruments, may be able to provide upper bounds on the large-scale ISRF.

We propose a simple explanation for the increase of approximately 3 MeV/c2 in the mass value of the X(3872) obtained from D{sup *0} {bar D}{sup 0} decay relative to that obtained from decay to J/{psi}{pi}{sup +}{pi}{sup -} If the total width of the X(3872) is 2-3 MeV, the peak position in the D{sup *0} {bar D}{sup 0} invariant mass distribution is sensitive to the final state orbital angular momentum because of the proximity of the X(3872) to D{sup *0} {bar D}{sup 0} threshold. We show that for total width 3 MeV and one unit of orbital angular momentum, a mass shift {approx}3 MeV/c2 is obtained; experimental mass resolution should slightly increase this value. A consequence is that spin-parity 2{sup -} is favored for the X(3872).

A. Introduction 1. The Working Group III contribution to theIPCC Fourth Assessment Report (AR4) focuses on new literature on thescientific, technological, environmental, economic and social aspects ofmitigation of climate change, published since the IPCC Third AssessmentReport (TAR) and the Special Reports on COB2B Capture and Storage (SRCCS)and on Safeguarding the Ozone Layer and the Global Climate System (SROC).The following summary is organised into six sections after thisintroduction: - Greenhouse gas (GHG) emission trends, - Mitigation in theshort and medium term, across different economic sectors (until 2030), -Mitigation in the long-term (beyond 2030), - Policies, measures andinstruments to mitigate climate change, - Sustainable development andclimate change mitigation, - Gaps in knowledge. References to thecorresponding chapter sections are indicated at each paragraph in squarebrackets. An explanation of terms, acronyms and chemical symbols used inthis SPM can be found in the glossary to the main report.

Comprehensive test ban monitoring in terms of location and discrimination has progressed significantly in recent years. However, the characterization of sources and the estimation of low yields remains a particular challenge.

The overall goal of this project was to develop and validate sterility systems in poplar with the ultimate goal of fulfilling the basic requirements for commercial use. For this, sterility must be complete and stable over multiple growing seasons, cause no detrimental effects on vegetative growth, and successful transformation events must be identifiable via molecular tests when trees are still juvenile. Because of the inherent difficulties in achieving and demonstrating complete sterility in trees, our approach was to study alternate sterility systems in Arabidopsis and/or early-flowering tree systems. The public benefit from this work is the capacity for containment of genes or exotic forms of trees so they can be of benefit for industry for production of wood, energy, and renewable products, while having minimal impact on wild populations of trees. We tested three methods for engineering sterility: dominant negative mutant (DNM) proteins, floral tissue ablation, and RNA interference (RNAi) to suppress the expression of several floral regulatory genes. The ultimate goal of this work was to produce a number of transgenic poplars that could be outplanted to enable future assessments of the effectiveness of these transgenic sterility methods. Our attempts to produce ablation constructs that did not interfere with …

None