This document contains a revised and updated monitoring plan for RCRA interim status groundwater assessment, site hydrogeology, and a conceptual model of the RCRA treatment, storage, and disposal unit. Monitoring under interim status is expected to continue until the 216-U-12 crib is incorporated as a chapter into the Hanford Facility RCRA Permit or administratively closed as proposed to EPA and Ecology.

We have demonstrated 466mW of 469nm light from a frequency doubled continuous wave fiber laser. The system consisted of a 938nm single frequency laser diode master oscillator, which was amplified in two stages to 5 Watts using cladding pumped Nd{sup 3+} fiber amplifiers and then frequency doubled in a single pass through periodically poled KTP. The 3cm long PPKTP crystal was made by Raicol Crystals Ltd. with a period of 5.9 {micro}m and had a phase match temperature of 47 degrees Centigrade. The beam was focused to a 1/e{sup 2} diameter in the crystal of 29 {micro}m. Overall conversion efficiency was 11% and the results agreed well with standard models. Our 938nm fiber amplifier design minimizes amplified spontaneous emission at 1088nm by employing an optimized core to cladding size ratio. This design allows the 3-level transition to operate at high inversion, thus making it competitive with the 1088nm 4-level transition. We have also carefully chosen the fiber coil diameter to help suppress propagation of wavelengths longer than 938 nm. At 2 Watts, the 938nm laser had an M{sup 2} of 1.1 and good polarization (correctable with a quarter and half wave plate to >10:1).

Within the scope of conceptual research and development (R&D) activities in support of the Rare Isotope Accelerator (RIA) facility, high priority is given to the development of high-power fragmentation beam dumps. A pre-study was made of a static water-cooled Cu beam dump that can meet requirements for a 400 MeV/u uranium beam. The issue of beam sputtering was addressed and found to be insignificant. Preliminary radiation transport simulations show significant damage (in displacements per atom, DPA) in the vicinity of the Bragg peak of the uranium ions. Experimental data show that defects in Cu following neutron or high-energy particle irradiation tend to saturate at doses between 1 and 5 DPA, and this saturation in defect density also results in saturation of mechanical property degradation. However, effects of swift heavy ion irradiation and the production of gaseous and solid transmutant elements still need to be addressed. Initial calculations indicate that He concentrations on the order of 400 appm are produced in the beam dump after several weeks of continuous operation and He embrittlement may be a concern. Recommendations are made for further investigation of Cu irradiation effects for RIA-relevant conditions.

Ulrich in the forward to the Zenger and Folkman (2002) book, ''The Extraordinary Leader'', wrote about the importance of character in leadership stating, ''Everything about great leaders radiates from character. Character improves the probability of exhibiting strong interpersonal skill. Some of this perceived character is innate . . . but more is driven by the leader's self-awareness and interactions with others'' (p. ix). The purpose of this study was to explore the relationship between leadership effectiveness and character using leader-managers of knowledge workers as the subject sample. Findings indicated that character, particularly those factors associated with honesty, setting the example, and valuing and strengthening others, were what set the most effective leader-managers apart from their peers. Technical competence and self-efficacy were found to be common characteristics of the study sample as was a drive for results. Who a leader-manager is, his/her substance, was found in this study to differentiate the ''best'' leader-managers at the Lawrence Livermore National Laboratory. By their character, leader-managers establish the environment in which knowledge workers contribute and grow. As found by Pfeiffer (2000), Leaders of companies that experience smaller gaps between what they know and what they do (to turn knowledge into action), understand that their …

The thermal and shock sensitivities of plastic bonded explosive formations based on 2,6-diamino-3,5-dinitropyrazine-1-oxide (commonly called LLM-105 for Lawrence Livermore Molecule No.105) are reported. The One Dimensional Time to Explosion (ODTX) apparatus was used to generate times to thermal explosion at various initial temperatures. A four-reaction chemical decomposition model was developed to calculate the time to thermal explosion versus inverse temperature curve. Three embedded manganin pressure gauge experiments were fired at different initial pressures to measure the pressure buildup and the distance required for transition to detonation. An Ignition and Growth reactive model was calibrated to this shock initiation data. LLM-105 exhibited thermal and shock sensitivities intermediate between those of triaminotrinitrobenzene (TATB) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazine (HMX).

In response to concerns expressed by the California Legislature and the citizenry of the State of California, the State Water Resources Control Board (SWRCB), implemented a program to assess groundwater quality, and provide a predictive capability for identifying areas that are vulnerable to contamination. The program was initiated in response to concern over public supply well closures due to contamination by chemicals such as methyl tert butyl ether (MTBE) from gasoline, and solvents from industrial operations. As a result of this increased awareness regarding groundwater quality, the Supplemental Report of the 1999 Budget Act mandated the SWRCB to develop a comprehensive ambient groundwater monitoring plan, and led to the initiation of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The primary objective of the California Aquifer Susceptibility (CAS) project (under the GAMA Program) is to assess water quality and to predict the relative susceptibility to contamination of groundwater resources throughout the state of California. Under the GAMA program, scientists from Lawrence Livermore National Laboratory (LLNL) collaborate with the SWRCB, the U.S. Geological Survey, the California Department of Health Services (DHS), and the California Department of Water Resources (DWR) to implement this groundwater assessment program. In 2003, LLNL carried out this …

The Physics and Advanced Technologies (PAT) Directorate overcame significant challenges in 2003 to deliver a wealth of scientific and programmatic milestones, and move toward closer alignment with programs at Lawrence Livermore National Laboratory. We acted aggressively in enabling the PAT Directorate to contribute to future, growing Lawrence Livermore missions in homeland security and at the National Ignition Facility (NIF). We made heavy investments to bring new capabilities to the Laboratory, to initiate collaborations with major Laboratory programs, and to align with future Laboratory directions. Consistent with our mission, we sought to ensure that Livermore programs have access to the best science and technology, today and tomorrow. For example, in a move aimed at revitalizing the Laboratory's expertise in nuclear and radiation detection, we brought the talented Measurement Sciences Group to Livermore from Lawrence Berkeley National Laboratory, after its mission there had diminished. The transfer to our I Division entailed significant investment by PAT in equipment and infrastructure required by the group. In addition, the move occurred at a time when homeland security funding was expected, but not yet available. By the end of the year, though, the group was making crucial contributions to the radiation detection program at Livermore, and …

In this paper we explore the possibility of using diamond secondary emitter in a high average current electron injector to amplify the current from the photocathode and to isolate the cathode and the injector from each other to increase the life time of the cathode and preserve the performance of the injector. Secondary electron yield of 225 and current density of 0.8 a/cm{sup 2} have been measured in the transmission mode from type 2 a natural diamond. Although the diamond will be heated during normal operation in the injector, calculations indicate that by cryogenically cooling the diamond, the temperature gradient along the diamond can be maintained within the acceptable range. The electron energy and temporal distributions are expected to be narrow from this device resulting in high brightness beams. Plans are underway to measure the SEY in emission mode, fabricate photocathode-diamond capsule and test diamond and capsule in superconducting RF injector.

The purpose of this note is to describe an algorithm resulting from the uniting of two ideas introduced and applied elsewhere. For many problems, AMG has always been difficult due to complexities whose natures are difficult to discern from the entries of matrix A alone. Element-based interpolation has been shown to be an effective method for some of these problems, but it requires access to the element matrices on all levels. One way to obtain these has been to perform element agglomeration to form coarse elements, but in complicated situations defining the coarse degrees of freedom (dofs) is not easy. The spectral approach to coarse dof selection is very attractive due to its elegance and simplicity. The algorithm presented here combines the robustness of element interpolation, the ease of coarsening by element agglomeration, and the simplicity of defining coarse dofs through the spectral approach. As demonstrated in the numerical results, the method does yield a reasonable solver for the problems described. It can, however, be an expensive method due to the number and cost of the local, small dense linear algebra problems; making it a generally competitive method remains an area for further research.

Newsletter of the Texas Department of Health discussing the news, activities, and events of the organization and other information related to health in Texas.

The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 …

A Plesset-type treatment [J. Appl. Phys. 25, 96 (1954)] is used to assess the effects of contiguous density gradients at an accelerating spherical classical interface on Rayleigh-Taylor and Bell-Plesset perturbation growth. Analytic expressions are obtained that describe enhanced Rayleigh-Taylor instability growth from contiguous density gradients aligned with the acceleration and which increase the effective Atwood number of the perturbed interface. A new pathway for geometric amplification of surface perturbations on an accelerating interface with contiguous density gradients is identified. A resonance condition between the density-gradient scalelength and the radius of the interface is also predicted based on a linearized analysis of Bernoulli's equation, potentially leading to enhanced perturbation growth. Comparison of the analytic treatment with detailed two-dimensional single-mode growth-factor simulations shows good agreement for low-mode numbers where the effects of spherical geometry are most manifested.

The proliferation of nuclear, chemical, and biological weapons (collectively known as weapons of mass destruction, or WMD) and the potential acquisition and use of WMD against the world by terrorists are extremely serious threats to international security. These threats are complex and interrelated. There are myriad routes to weapons of mass destruction--many different starting materials, material sources, and production processes. There are many possible proliferators--threshold countries, rogue states, state-sponsored or transnational terrorists groups, domestic terrorists, and even international crime organizations. Motives for acquiring and using WMD are similarly wide ranging--from a desire to change the regional power balance, deny access to a strategic area, or alter international policy to extortion, revenge, or hate. Because of the complexity of this threat landscape, no single program, technology, or capability--no silver bullet--can solve the WMD proliferation and terrorism problem. An integrated program is needed that addresses the WMD proliferation and terrorism problem from end to end, from prevention to detection, reversal, and response, while avoiding surprise at all stages, with different activities directed specifically at different types of WMD and proliferators. Radiation detection technologies are an important tool in the prevention of proliferation. A variety of new developments have enabled enhanced performance in …

High Energy Density Physics (HEDP) applications require high line charge density ion beams. An efficient method to obtain this type of beams is to extract a long pulse, high current beam from a gun at high energy, and let the beam pass through a decelerating field to compress it. The low energy beam-bunch is loaded into a solenoid and matched to a Brillouin flow. The Brillouin equilibrium is independent of the energy if the relationship between the beam size (a), solenoid magnetic field strength (B) and line charge density is such that (Ba){sup 2} is proportional to the line charge density. Thus it is possible to accelerate a matched beam at constant line charge density. An experiment, NDCX-1c is being designed to test the feasibility of this type of injectors, where we will extract a 1 microsecond, 100 mA, potassium beam at 160 keV, decelerate it to 55 keV (density {approx}0.2 {micro}C/m), and load it into a 2.5 T solenoid where it will be accelerated to 100-150 keV (head to tail) at constant line charge density. The head-to-tail velocity tilt can be used to increase bunch compression and to control longitudinal beam expansion. We will present the physics design and …

The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 …

This review addresses the issue of surface segregation inbimetallic alloy nanoparticles, which are relevant to heterogeneouscatalysis, in particular for electro-catalysts of fuel cells. We describeand discuss a theoretical approach to predicting surface segregation insuch nanoparticles by using the Modified Embedded Atom Method and MonteCarlo simulations. In this manner it is possible to systematicallyexplore the behavior of such nanoparticles as a function of componentmetals, composition, and particle size, among other variables. We choseto compare Pt75Ni25, Pt75Re25, and Pt80Mo20 alloys as example systems forthis discussion, due to the importance of Pt in catalytic processes andits high-cost. It is assumed that the equilibrium nanoparticles of thesealloys have a cubo-octahedral shape, the face-centered cubic lattice, andsizes ranging from 2.5 nm to 5.0 nm. By investigating the segregation ofPt atoms to the surfaces of the nanoparticles, we draw the followingconclusions from our simulations at T= 600 K. (1) Pt75Ni25 nanoparticlesform a surface-sandwich structure in which the Pt atoms are stronglyenriched in the outermost and third layers while the Ni atoms areenriched in the second layer. In particular, a nearly pure Pt outermostsurface layer can be achieved in those nanoparticles. (2) EquilibriumPt75Re25 nanoparticles adopt a core-shell structure: a nearly pure Ptshell surrounding a more uniform Pt-Re …

We construct a simple theory in which the fine-tuning of the standard model is significantly reduced. Radiative corrections to the quadratic part of the scalar potential are constrained to be symmetric under a global U(4) x U(4){prime} symmetry due to a discrete Z{sub 2} 'twin' parity, while the quartic part does not possess this symmetry. As a consequence, when the global symmetry is broken the Higgs fields emerge as light pseudo-Goldstone bosons, but with sizable quartic self-interactions. This structure allows the cutoff scale, {Lambda}, to be raised to the multi-TeV region without significant fine-tuning. In the minimal version of the theory, the amount of fine-tuning is about 15% for {Lambda} = 5 TeV, while it is about 30% in an extended model. This provides a solution to the little hierarchy problem. In the minimal model, the 'visible' particle content is exactly that of the two Higgs doublet standard model, while the extended model also contains extra vector-like fermions with masses {approx} (1 {approx} 2) TeV. At the LHC, our minimal model may appear exactly as the two Higgs doublet standard model, and new physics responsible for cutting off the divergences of the Higgs mass-squared parameter may not be discovered. Several …

indicates that 2|Vub / Vcb/ Vus| = (1-z) with z given by z = 0.19 +(-) 0.14. This fact implies that irrespective of the form of the quark Yukawa matrices, the measured value of the SM CP phase beta is approximately the maximum allowed by the measured absolute values of the CKM elements. This is beta = pi/6 - z/sqrt{3} for gamma = pi/3 + z/sqrt{3}, which implies alpha = pi/2. Alternatively, assuming that beta is exactly maximal and using the experimental measurement, sin(2beta) = 0.726+(-) 0.037, the phase gamma is predicted to be gamma = pi/2 - beta = 66.3 +(-) 1.7. The maximality of beta, if confirmed by the near-future experiments, may give us some clues as to the origin of CP violation.

In this paper we reconsider the problem of the Euler parametrization for the unitary groups. After constructing the generic group element in terms of generalized angles, we compute the invariant measure on SU(N) and then we determine the full range of the parameters, using both topological and geometrical methods. In particular, we show that the given parametrization realizes the group SU(N+1) as a fibration of U(N) over the complex projective space CP{sup n}. This justifies the interpretation of the parameters as generalized Euler angles.

Optical microscopy, scanning electron microscopy, and transmission electron microscopy were employed to examine the interfacial microstructural effects of impurities in alumina substrates used to fabricate alumina-niobium interfaces via liquid-film-assisted joining. Three types of alumina were used: undoped high-purity single-crystal sapphire; a high-purity, high-strength polycrystalline alumina; and a lower-purity, lower-strength polycrystalline alumina. Interfaces formed between niobium and both the sapphire and high-purity polycrystalline alumina were free of detectable levels of impurities. In the lower-purity alumina, niobium silicides were observed at the alumina-niobium interface and on alumina grain boundaries near the interface. These silicides formed in small-grained regions of the alumina and were found to grow from the interface into the alumina along grain boundaries. Smaller silicide precipitates found on grain boundaries are believed to form upon cooling from the bonding temperature.

Transmission Electron Microscopy and x-ray diffraction were used to study compositional modulation in In{sub x}Ga{sub 1-x} N layers grown with compositions close to the miscibility gap. The samples (0.34 < x < 0.8) were deposited by molecular beam epitaxy using either a 200-nm-thick AlN or GaN buffer layer grown on a sapphire substrate. In the TEM imaging mode this modulation is seen as black/white fringes which can be considered as self-assembled thin quantum wells. Periodic compositional modulation leads to extra electron diffraction spots and satellite reflections in x-ray diffraction in the {theta}-2{theta} coupled geometry. The modulation period was determined using both methods. Larger modulation periods were observed for layers with higher In content and for those having larger mismatch with the underlying AlN buffer layer. Compositional modulation was not observed for a sample with x = 0.34 grown on a GaN buffer layer. Modulated films tend to have large 'Stokes shifts' between their absorption edge and photoluminescence peak.

Nuclear energy can be used to produce hydrogen. The key strategic question is this: ''What are the early markets for nuclear hydrogen?'' The answer determines (1) whether there are incentives to implement nuclear hydrogen technology today or whether the development of such a technology could be delayed by decades until a hydrogen economy has evolved, (2) the industrial partners required to develop such a technology, and (3) the technological requirements for the hydrogen production system (rate of production, steady-state or variable production, hydrogen purity, etc.). Understanding ''early'' markets for any new product is difficult because the customer may not even recognize that the product could exist. This study is an initial examination of how nuclear hydrogen could be used in two interconnected early markets: the production of electricity for peak and intermediate electrical loads and spinning reserve for the electrical grid. The study is intended to provide an initial description that can then be used to consult with potential customers (utilities, the Electric Power Research Institute, etc.) to better determine the potential real-world viability of this early market for nuclear hydrogen and provide the starting point for a more definitive assessment of the concept. If this set of applications is …

In SciDAC SDM project, the main assignment to the Georgia Institute of Technology team (according to the proposed work) is to develop advanced information extraction and information integration technologies on top of the XWRAP technology originated from Georgia Tech [LPH01]. We have developed XWRAPComposer technology to enable the XWRAP code generator to generate Java information wrappers that are capable of extraction of data from multiple linked pages. These information wrappers are used as gateways or adaptors for scientific information mediators to access and fuse interesting data and answering complex queries over a large collection of heterogeneous scientific information sources. Our accomplishments over the SciDAC sponsored years (July 2001 to July 2004) can be summarized along two dimensions. Technically, we have produced a number of major software releases and published over 30 research papers in both international conferences and international journals. The planned software releases include 1. Five Java wrappers and five WDSL-enabled wrappers for SDM Pilot scenarios, which were released in early 2003, 2. The XWRAPComposer toolkit (command line version) which was first released in late 2003 and then released in Summer 2004, 3. Five Ptolemy wrapper actors which were released first in Summer 2003, and then released again in …

This report summarizes the results of environmental surveys conducted within the corridor of a temporary haul road (''Haul Road'') to be constructed from East Tennessee Technology Park (ETTP) to the Environmental Management Waste Management Facility (EMWMF) located just west of the Y-12 National Security Complex (Y-12). Environmental surveys were conducted by natural resource experts at Oak Ridge National Laboratory who routinely assess the significance of various project activities on the Oak Ridge Reservation (ORR). ORNL assistance to the Haul Road Project included environmental assessments necessary to determine the best route for minimizing impacts to sensitive resources such as wetlands or rare plants. Once the final route was chosen, environmental surveys were conducted within the corridor to evaluate the impacts to sensitive resources that could not be avoided. The final Haul Road route follows established roads and a power-line corridor to the extent possible (Fig. 1). Detailed explanation regarding the purpose of the Haul Road and the regulatory context associated with its construction is provided in at least two major documents and consequently is not presented here: (1) Explanation of Significant Differences for the Record of Decision for the Disposal of Oak Ridge Reservation Comprehensive Environmental Response, Compensation, and Liability Act …