We describe several experiments performed at the LLNL Site 300 firing range and on the LLNL 1/3 scale gun to investigate the deceleration of small projectiles (l {approx} 3-5 [mm]) in low-density foam ({rho} {approx} 0.08-0.32 [g/cm{sup 3}]). The experiments at the firing range researched a passive velocity diagnostic based on Faraday's law of induction, while experiments on the 1/3 scale gun investigated the effects of varying projectile surface area, projectile shape, and foam density on the drag coefficient c{sub d}. Analysis shows that the velocity diagnostic has an uncertainty on the order of 1 percent for projectiles with velocity v {approx} 0.8-1.2 [km/s]. The 1/3 scale gun experiments, dubbed the Krispy Kreme series, included nine shots considering the combinations of 3 projectile surface areas with 3 target densities. The experiments used Tantalum square surface area block projectiles (with an initial velocity v{sub 0} {approx} 1.2 [km/s], a common thickness T = 2.67 [mm], and square side lengths of 3, 4, and 5 [mm]) decelerating in polyurethane foams (with densities {rho}{sub f} of 0.08, 0.16 and 0.32 [g/cm{sup 3}]). Standard fluid models of the Krispy Kreme experiments predict Reynolds numbers Re {approx} 10{sup 5} - 10{sup 6}, Mach numbers Ma …

In May 1985, a National Pollutant Discharge Elimination System (NPDES) permit was issued for the Oak Ridge Y-12 Plant. As a condition of the permit, a Biological Monitoring and Abatement Program (BMAP) was developed to demonstrate that the effluent limitations established for the Y-12 Plant protect the classified uses of the receiving stream (East Fork Poplar Creek; EFPC), in particular, the growth and propagation of aquatic life (Loar et al. 1989). A second objective of the BMAP is to document the ecological effects resulting from the implementation of a water pollution control program designed to eliminate direct discharges of wastewaters to EFPC and to minimize the inadvertent release of pollutants to the environment. Because of the complex nature of the discharges to EFPC and the temporal and spatial variability in the composition of the discharges, a comprehensive, integrated approach to biological monitoring was developed. A new permit was issued to the Y-12 Plant on April 28, 1995 and became effective on July 1, 1995. Biological monitoring continues to be required under the new permit. The BMAP consists of four major tasks that reflect different but complementary approaches to evaluating the effects of the Y-12 Plant discharges on the aquatic integrity …

Monthly newsletter discussing news and activities related to the Atmospheric Radiation Measurement Program, articles about weather and atmospheric phenomena, and other related topics.

Using 383 million B{bar B} pairs from the BABAR data sample, they report results for branching fractions of six charged B-meson decay modes, where a charged kaon recoils against a charmless resonance decaying to K{bar K}* or {eta}{pi}{pi} final states with mass in the range (1.2-1.8) GeV/c{sup 2}. They observe a significant enhancement at the low K{bar K}* invariant mass which is interpreted as B{sup +} {yields} {eta}(1475)K{sup +}, find evidence for the decay B{sup +} {yields} {eta}(1295)K{sup +}, and place upper limits on the decays B{sup +} {yields} {eta}(1405)K{sup +}, B{sup +} {yields} f{sub 1}(1285)K{sup +}, B{sup +} {yields} f{sub 1}(1420)K{sup +}, and B{sup +} {yields} {phi}(1680)K{sup +}.

Summaries of paper: Emission requirements dictate vehicle update cycles; Packaging, performance and cost impacted; Styling updates can be integrated; Opportunity to integrate features and performance; Non-uniform regulations challenge resources; and Customers won't expect to pay more or receive less.

None

None

Visapult is a prototype application and framework for remote visualization of large scientific datasets. We approach the technical challenges of tera-scale visualization with a unique architecture that employs high speed WANs and network data caches for data staging and transmission. This architecture allows for the use of available cache and compute resources at arbitrary locations on the network. High data throughput rates and network utilization are achieved by parallelizing I/O at each stage in the application, and by pipe-lining the visualization process. On the desktop, the graphics interactivity is effectively decoupled from the latency inherent in network applications. We present a detailed performance analysis of the application, and improvements resulting from field-test analysis conducted as part of the DOE Combustion Corridor project.

We describe the development of an on-line high-energy heavy-ion experimental database. When completed, the database will be searchable and cross-indexed with relevant publications, including published detector descriptions. While this effort is relatively new, it will eventually contain all published data from older heavy-ion programs as well as published data from current and future facilities. These data include all measured observables in proton-proton, proton-nucleus and nucleus-nucleus collisions. Once in general use, this database will have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models for a broad range of experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion, target and source development for upcoming facilities such as the International Linear Collider and homeland security. This database is part of a larger proposal that includes the production of periodic data evaluations and topical reviews. These reviews would provide an alternative and impartial mechanism to resolve discrepancies between published data from rival experiments and between theory and experiment. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This project serves as …

None

In several cases, coupling synchrotron light into opticalfibers can substantially facilitate the use of beam diagnosticinstrumentation, that measures longitudinal beam properties by detectingsynchrotron radiation. It has been discussed in [1]with some detail, howfiberoptics can bring the light at relatively large distances from theaccelerator, where a variety of devices can be used to measure beamproperties and parameters. Light carried on a fiber can be easilyswitched between instruments so that each one of them has 100 percent ofthe photons available, rather than just a fraction , when simultaneousmeasurements are not indispensable. From a more general point of view,once synchrotron light is coupled into the fiber, the vast array oftechniques and optoelectronic devices, developed by the telecommunicationindustry becomes available.In this paper we present the results of ourexperiments at the Advanced Light Source, where we tried to assess thechallenges and limitations of the coupling process and determine whatlevel of efficiency one can typically expect to achieve.

Vertical cavity surface emitting laser (VCSEL) sources have been adopted into Gigabit Ethernet applications in a remarkably short time period. VCSELs are particularly suitable for multimode optical fiber local area networks (LANs), due to their reduced threshold current, circular output beam, and inexpensive and high volume manufacture. Moreover, selectively oxidized VCSELs are nearly ideal LAN sources since the oxide aperture within the laser cavity produces strong electrical and optical confinement which enables high electrical to optical conversion efficiency and minimal modal discrimination allowing emission into multiple transverse optical modes. In addition to the large demand for multimode lasers, VCSELs which emit into a single optical mode are also increasingly sought for emerging applications, which include data communication with single mode optical fiber, bar code scanning, laser printing, optical read/write heads, and modulation spectroscopy. To achieve single mode selectively oxidized VCSELs is a challenging task, since the inherent index confinement within these high performance lasers is very large.

A new method for measuring the wavelength dependence of the transit time, material dispersion, and attenuation of an optical fiber is described. The authors inject light from a 4-ns risetime pulsed broad-band flashlamp into various length fibers and record the transmitted signals with a time-resolved spectrograph. Segments of data spanning an approximately 3,000 {angstrom} range are recorded from a single flashlamp pulse. Comparison of data acquired with short and long fibers enables the determination of the transit time and the material dispersion as functions of wavelength dependence for the entire recorded spectrum simultaneously. The wavelength dependent attenuation is also determined from the signal intensities. The method is demonstrated with experiments using a step index 200-{micro}m-diameter SiO{sub 2} fiber. The results agree with the transit time determined from the bulk glass refractive index to within {+-} 0.035% for the visible (4,000--7,200 {angstrom}) spectrum and 0.12% for the ultraviolet (2,650--4,000 {angstrom}) spectrum, and with the attenuation specified by the fiber manufacturer to within {+-} 10%.

Over one million gallons of high-level-waste with more than a million curies of {sup 137}Cs have leaked from Hanford tank farms to the sediments beneath the tanks. Early on, it was assumed that cesium migration would be limited because laboratory experiments had shown that cesium strongly sorbs to phyllosilicate minerals common in soils [1-5]. Additionally, minimal cesium desorption has been observed in contaminated Hanford sediments [6]. However, recent observations beneath the Hanford tank farms show that cesium has migrated to greater depths than expected [7]. Various explanations for enhanced cesium migration include (1) physical processes such as fast flow pathways or bypassing of exchange sites in immobile zones, and (2) chemical processes associated with the very high salt contents and high pH of the tank fluids. Ion exchange processes are clearly indicated in the depth profiles of {sup 137}Cs, and potassium, sodium, calcium, and nitrate (acting as a tracer) from the bore holes beneath tank SX-108 and tank SX-115. Below both tanks, cesium concentration peaks are retarded with respect to potassium and sodium concentration peaks. The importance of cation concentration on ion exchange is illustrated by comparing the sodium and tracer profiles beneath the tanks. Pore water with high sodium …

Many dairy farmer groups are concerned that imports of milk protein concentrates (MPCs) are displacing domestic dairy ingredients and thus depressing farm milk prices. S.560 and H.R. 1160 would impose tariff rate quotas on certain MPCs, and S. 40 would prohibit the use of dry MPC in domestic cheese production. Dairy processor groups are opposed to these bills. A dairy producer group challenged the Customs Service classification of MPCs, but Customs ruled that current classifications are correct.

The data set considered here is the topographic grid used in the Geologic Framework Model (GFM). The grid has been used in each version of the GFM, and was extracted from GFM3.1 (M09901MWDGFM3 1.000, file name ''topography.2grd''). The grid was given a unique DTN (M00002SPATOP00.001). A Technical Assessment method was used to evaluate these data to determine the adequacy of the grid for use in three-dimensional modeling. The topographic grid was compared to qualified borehole collar survey data (DTN: M09906GPS98410.000) and the mismatches documented. An acceptance window was established for the topographic grid based on the needs of the data users. The grid was determined to be within the acceptance window, and was determined to be adequate for its intended use in three-dimensional spatial modeling and is recommended to be Qualified.

The data set considered here is the borehole stratigraphic contacts data (DTN: M09811MWDGFM03.000) used as input to the Geologic Framework Model. A Technical Assessment method used to evaluate these data with a two-fold approach: (1) comparison to the geophysical logs on which the contacts were, in part, based; and (2) evaluation of the data by mapping individual units using the entire data set. Qualification of the geophysical logs is being performed in a separate activity. A representative subset of the contacts data was chosen based on importance of the contact and representativeness of that contact in the total data set. An acceptance window was established for each contact based on the needs of the data users. Data determined to be within the acceptance window were determined to be adequate for their intended use in three-dimensional spatial modeling and were recommended to be Qualified. These methods were chosen to provide a two-pronged evaluation that examines both the origin and results of the data. The result of this evaluation is a recommendation to qualify all contacts. No data were found to lie outside the pre-determined acceptance window. Where no geophysical logs are available, data were evaluated in relation to surrounding data and …

This report provides background information on the types of water supply and wastewater treatment projects traditionally funded by the federal government and the several existing programs to assist communities with water supply and wastewater recycling and treatment.

The African Development Bank Group, including the Bank itself (AfDB) and its “soft-loan” affiliate, the African Development Fund (AfDF), is a development finance institution based in Abidjan, Côte d’Ivoire. The Bank has 53 African members, as well as 24 non-regional members, including the United States. In the mid-1990s, the Bank faced management problems and difficulties arising from non-performing loans, but reforms launched in 1995 by a new Bank president, Omar Kabbaj, brought new pledges of support from the non-regionals. U.S. contributions to the Fund resumed in FY1998 and to the Bank in FY2000. This report will be updated as events warrant.

This is a description of the system that collects and processes the sludge and radioactive ions released by the spent nuclear fuel (SNF) processing operations conducted in the 105 KW Basin. The system screens, settles, filters, and conditions the basin water for reuse. Sludge and most radioactive ions are removed before the water is distributed back to the basin pool. This system is part of the Spent Nuclear Fuel Project (SNFP).

None

The latest results of exclusive charmless semileptonic decays B {yields} {pi}{ell}v and B {yields} {rho}{ell}v from the BABAR Collaboration are presented. They are based on samples of B{bar B} events recorded on the {Upsilon}(4S) resonance. Several different experimental techniques are compared. Measurements of partial branching fractions in intervals of q{sup 2}, the four-momentum transfer squared, allow a study of the shape of the B {yields} {pi}{ell}v form factor and a comparison with theoretical calculations. The Cabibbo-Kobayashi-Maskawa matrix element |V{sub ub}| is determined using the measured branching fractions combined with recent form-factor predictions.

Glovebox HA-20MB is located in Room 235B of the 234-5Z Building at the Plutonium Finishing Plant. This enclosure contains mixers, mixer bowls, a crusher unit, an isolated inoperable conveyor unit, plutonium residue feed cans, cemented cans, and a feedwater container. Plutonium residue, not conducive to other forms of stabilization, is prepared for storage and ultimate disposal by cementation. The feed residue material cans can have plutonium contents of only a few grams or up to 200 grams. This evaluation accommodates this wide range of container fissile concentrations.

None