Annual report of the Texas Racing Commission describing goals, activities, and accomplishments during fiscal year 2008.

COGEMA Engineering Corporation (COGEMA), under a contract from CH2M Hill Hanford Group (CH2M Hill), has performed an ultrasonic nondestructive examination of selected portions of Double-Shell Tank 241-SY-101. The purpose of this examination was to provide information that could be used to evaluate the integrity of the wall of the primary tank. The requirements for the ultrasonic examination of Tank 241-SY-101 were to detect, characterize (identify, size, and locate), and record measurements made of any wall thinning, pitting, or cracks that might be present in the wall of the primary tank. Any measurements that exceed the requirements set forth in the Engineering Task Plan (ETP), RPP-17750 (Jensen 2003) and summarized on page 1 of this document, are reported to CH2M Hill and the Pacific Northwest National Laboratory (PNNL) for further evaluation. Under the contract with CH2M Hill, all data is to be recorded on disk and paper copies of all measurements are provided to PNNL for third-party evaluation. PNNL is responsible for preparing a report that describes the results of the COGEMA ultrasonic examinations.

X-ray lasers have been extensively studied around the world since the first laboratory demonstration on the Novette laser at LLNL in 1984. The characteristic properties of short wavelength, high monochromaticity, collimation and coherence make x-ray lasers useful for various applications. These include demonstrations of biological imaging within the water window, interferometry of laser plasmas and radiography of laser-heated surfaces. One of the critical issues has been the high power pump required to produce the inversion. The power scaling as a function of x-ray laser wavelength follows a {approx} {lambda}{sup -4} to {approx} {lambda}{sup -6} law. The shortest x-ray laser wavelength of {approx}35 {angstrom} demonstrated for Ni-like Au was at the limit of Nova laser capabilities. By requiring large, high power lasers such as Nova, the shot rate and total number of shots available have limited the rapid development of x-ray lasers and applications. In fact over the last fifteen years the main thrust has been to develop more efficient, higher repetition rate x-ray lasers that can be readily scaled to shorter wavelengths. The recent state of progress in the field can be found in references. The objective of the project was to develop a soft x-ray laser (XRL) pumped by …

A Working Group Meeting on Heavy Vehicle Aerodynamic Drag was held at Lawrence Livermore National Laboratory on April 3 and 4, 2002. The purpose of the meeting was to present and discuss technical details on the experimental and computational work in progress and future project plans. Representatives from the Department of Energy (DOE) Office of Transportation Technology Office of Heavy Vehicle Technology (OHVT), Lawrence Livermore National Laboratory (LLNL), Sandia National Laboratories (SNL), NASA Ames Research Center, University of Southern California (USC), and California Institute of Technology (Caltech), Georgia Tech Research Institute (GTRI), and Argonne National Laboratory (ANL), Volvo Trucks, and Freightliner Trucks presented and participated in discussions. This report contains the technical presentations (viewgraphs) delivered at the Meeting, briefly summarizes the comments and conclusions, and outlines the future action items.

This paper contains three analytical solutions of transport problems which can be used to test ray-effect errors in the numerical solutions of the Boltzmann Transport Equation (BTE). We derived the first two solutions and the third was shown to us by M. Prasad. Since this paper is intended to be an internal LLNL report, no attempt was made to find the original derivations of the solutions in the literature in order to cite the authors for their work.

An overall strategy for evaluating the long-term performance of three waste forms being considered for supplemental treatment of low-activity waste at Hanford is discussed. The same computational framework used to conduct the 2001 ILAW performance assessment will be used for all three waste forms. Cast stone will be modeled with a diffusion-advection transport model and bulk vitrified glass and steam reformed LAW will be modeled with a reactive chemical transport simulator. The recommended laboratory testing to support the supplemental LAW form selection includes single-pass flow-through (SPFT), product consistency (PCT), and vapor hydration tests for glass, SPFT and PCT tests for steam reformed LAW forms, and ANS 16.1 tests for cast stone. These and potentially other laboratory tests for the selected waste form(s) would also be the basis for more detailed studies needed to support a comprehensive long-term performance assessment should one or more of these waste forms be selected for disposal in an integrated disposal facility.

The ENDF/B data library has recently been updated and is now freely available through the National Nuclear Data Center (NNDC), Brookhaven National Laboratory. This most recent library is identified as ENDF/B-VI, Release 7. Release 7 completely supersedes all preceding releases. As distributed the ENDF/B-VI, Release 7 data includes cross sections represented in the form of a combination of resonance parameters and/or tabulated energy dependent cross sections, nominally at 0 Kelvin temperature. For use in applications this library has been processed into the form of temperature dependent cross sections at eight temperatures between 0 and 2100 Kelvin, in steps of 300 Kelvin. At each temperature the cross sections are tabulated and linearly interpolable in energy. All results are in the computer independent ENDF/B-VI character format [1], which allows the data to be easily transported between computers. In its processed form this library is approximately 1.6 gigabyte in size and is distributed on three CDs.

This section reviews extensions and variations of the direct-semidirect (DSD) model for understanding the high-energy component of gamma spectra resulting from radiative capture of fast nucleons; i.e., the part of the spectrum that is not amenable to standard statistical model (Hauser-Feshbach) treatments. We describe recent results on the extension of the DSD model to unbound final states, including comparison with proton and neutron capture data. The importance of including convective-current magnetic radiation to explain proton capture angular distributions in the 30 MeV region is shown. We conclude with a brief discussion of a model closely related to the DSD, the pure-resonance model.

This is a letter report to Fluor Hanford, Inc. The purpose of this report is to summarize state-of-the-art, minimally intrusive geophysical techniques that can be used to clarify subsurface geology, structure, moisture, and chemical composition. The technology review focused on geophysical characterization techniques that provide two- or three-dimensional information about the spatial distribution of subsurface properties and/or contaminants.

To address SNJV concerns that fluoride in Nevada Test site (NTS) groundwaters may impact radionuclide speciation and transport, NTS water quality databases were obtained and scanned for analyses with high fluoride concentrations (> 10 mg/L). The aqueous speciation of nine representative samples of these groundwaters with added trace amounts of uranium (U), neptunium (Np), plutonium (Pu), americium (Am) and europium (Eu) was then calculated with the computer code EQ3NR assuming a temperature of 25 C, using currently available thermodynamic data for these species. Under conditions where U(VI), Np(V), Pu(IV), Am(III) and Eu(III) dominate, F complexes are insignificant (<1 mole %) for U, Np, Pu and Am. Eu-F complexes may be significant in groundwaters that lack bicarbonate, possess pH values less than about 7 at ambient temperatures, or contain F in extremely high concentrations (e.g. > 50 mg/L). The objective is to evaluate the extent to which fluoride in NTS groundwaters complex U(VI), Np(V), Pu(IV), Am(III) and Eu(III). The approach used is to screen existing databases of groundwater chemistry at NTS for waters with high fluoride concentrations and calculate the extent to which fluoride complexes with the nuclides of interest in these waters.

The design of high power UV laser systems is limited to a large extent by the laser-initiated damage performance of transmissive fused silica optical components. The 3{omega} (i.e., the third harmonic of the primary laser frequency) damage growth mitigation LDRD effort focused on understanding and reducing the rapid growth of laser-initiated surface damage on fused silica optics. Laser-initiated damage can be discussed in terms of two key issues: damage initiated at some type of precursor and rapid damage growth of the damage due to subsequent laser pulses. The objective of the LDRD effort has been the elucidation of laser-induced damage processes in order to quantify and potentially reduce the risk of damage to fused silica surfaces. The emphasis of the first two years of this effort was the characterization and reduction of damage initiation. In spite of significant reductions in the density of damage sites on polished surfaces, statistically some amount of damage initiation should always be expected. The early effort therefore emphasized the development of testing techniques that quantified the statistical nature of damage initiation on optical surfaces. This work led to the development of an optics lifetime modeling strategy that has been adopted by the NIF project to …

In this section we review the available data on gamma spectra following radiative capture of neutrons above 10 MeV. A few measurements below that energy are included. An important source for references to this topic is the CINDA compilation maintained by the IAEA in cooperation with three other major data centers. An additional useful source is the review article by Weller and Roberson, which treats capture reactions with neutrons, protons, and alpha particles. The following discussion refers only to data that are easily accessible through readily-available journals, reports, or the EXFOR database. Most of the reported measurements were made for the purpose of determining cross sections for discrete states at the high energy end of the gamma spectra which are resolvable or nearly so. In only a few cases have cross sections been measured over a wide range of gamma energies. These measurements are first reviewed below, followed by a review of more detailed measurements such as angular distributions and analyzing powers. Neutron capture on hydrogen isotopes have not been included with the exception of a fairly recent measurement on deuterium; see CINDA for references to this specialized topic.

This paper describes the solution to a unique and challenging mixture experiment design problem involving: (1) 19 and 21 components for two different parts of the design, (2) many single-component and multi-component constraints, (3) augmentation of existing data, (4) a layered design developed in stages, and (5) a no-candidate-point optimal design approach. The problem involved studying the liquidus temperature of spinel crystals as a function of nuclear waste glass composition. The statistical objective was to develop an experimental design by augmenting existing glasses with new nonradioactive and radioactive glasses chosen to cover the designated nonradioactive and radioactive experimental regions. The existing 144 glasses were expressed as 19-component nonradioactive compositions and then augmented with 40 new nonradioactive glasses. These included 8 glasses on the outer layer of the region, 27 glasses on an inner layer, 2 replicate glasses at the centroid, and one replicate each of three existing glasses. Then, the 144 + 40 = 184 glasses were expressed as 21-component radioactive compositions and augmented with 5 radioactive glasses. A D-optimal design algorithm was used to select the new outer layer, inner layer, and radioactive glasses. Several statistical software packages can generate D-optimal experimental designs, but nearly all require a set …

The dataset for this report is described in Walter et al. (2004) and consists primarily of Nevada Test Site (NTS) explosions, hole collapse and earthquakes. In addition, there were several earthquakes in California and Utah; earthquakes recorded near Cataract Creek, Arizona; mine blasts at two areas in Arizona; and two mine collapses in Wyoming. In the vicinity of NTS there were mainshock/aftershock sequences at Little Skull Mt, Scotty's Junction and Hector ere mine. All the events were shallow and distances ranged from about 0.1 degree to regional distances. All of the data for these events were carefully reviewed and analyzed. In the following sections of the report, we describe analysis procedures, problems with the data and results of analysis.

The warm density matter regime of high energy density physics [1, 2, 3] has a high scientific discovery potential for the properties of plasmas at high densities and pressures and at moderate temperatures (kT) in which the Coulomb interaction energy between plasma particles exceed kT. This leads to correlations in the plasma characterized by the dimensionless ''coupling'' parameter {Lambda} > 1, where {Lambda} is defined by {Lambda} = q{sup 2}n{sup 1/3}/kT. Here q is the effective ion charge and n the ion density. Strongly-coupled plasmas with {Lambda} > 1 are difficult to study analytically and by numerical simulation. Many astrophysical systems (e.g., brown dwarfs, and giant planets) and inertial fusion plasmas in the beginning stages of compression fall into this regime. There is an opportunity to develop improved understanding and models through accurate measurements of properties in the large parameter space of temperature and density where data is currently limited or non-existent. X-ray free-electron lasers (Fourth generation light sources), ultra-short pulse and high energy optical lasers, pulsed-power z-pinch x-ray sources, and high explosives are all capable of producing warm dense matter conditions at various temperatures, pressures, and sample sizes. Therefore, the challenge is not how to create warm dense matter …

An archaeological excavation was conducted at the site of proposed groundwater monitoring well 199-K-131 in support of the 100-KR-4 Pump-and-Treat Project between June 2 and 3, 2004. Excavations confirmed that there were no intact cultural deposits at the proposed well location. This report was prepared to document the findings of the test excavation.

Ultrasonic (UT) and computed tomography (CT) evaluation of a P/M ring gear was performed at LLNL to characterize the gear and to determine the relative sensitivity of the two techniques to defects of interest. The features of concern lie at the root of the teeth and in layers along the sides of the teeth. These layers can be detected using metalography but success depends on chance and the number of sections polished. Much of the current focus is on improving the sensitivity of the CT scan and on better ways to evaluate the large data sets obtained. The initial data obtained showed anomalies close to the gear teeth as expected. Later data showed anomalies at other locations and in other orientations. Figure 3 shows a radiograph with vertical and horizontal CT slices through regions with anomalies.

This document describes the U.S. Department of Energy's (DOE) Hanford Site environment. It is updated each year and is intended to provide a consistent description of the Hanford Site environment for the many National Environmental Policy Act (NEPA) documents being prepared by DOE contractors. No statements of significance or environmental consequences are provided. This year's report is the sixteenth revision of the original document published in 1988 and is (until replaced by the seventeenth revision) the only version that is relevant for use in the preparation of Hanford NEPA, State Environmental Policy Act (SEPA), and Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) documents. The two chapters included in this document (Chapters 4 and 6) are numbered to correspond to the chapters where such information is typically presented in environmental impact statements (Weiss) and other Hanford Site NEPA or CERCLA documentation. Chapter 4.0 (Affected Environment) describes Hanford Site climate and meteorology, geology, hydrology, ecology, cultural, archaeological, and historical resources, socioeconomics, occupational safety and health, and noise. Chapter 6.0 (Statutory and Regulatory Requirements) describes federal and state laws and regulations, DOE directives and permits, and presidential executive orders that are applicable to the NEPA documents prepared for Hanford Site activities.

None

This document defines the detailed NIF full system shot procedure to obtain 8% power balance as specified by the SDR002 3.2.1.04. Because the 48 quads of the NIF will be set up over a period of five years, obtaining power balance will naturally be accomplished in two steps. First, as each quad is brought online, the four laser beams within each quad will be tuned by setting the PABTS splitter ratios so that each beam will give the same laser power on target during low energy square pulse shots. During the quad activation period all of the technical tools and procedures will be developed that are needed for attaining full laser power balance. After the initial settings of the 48 PABTS, if no other tuning is done the overall NIF power balance is expected to be about <15%. In the second step, an iteration procedure with approximately 18 full laser system shots will be needed to obtain 8% power balance by tuning out the remaining systematic differences among the quads to an acceptable small difference of 2% rms (at 3{omega}). This rms difference is smaller than the expected variation of the injection energy or the amplifier gain, and is also …

Photographic inspection techniques have become technically more sophisticated in recent years with the development of advanced equipment for the mass consumer market. High quality digital cameras, for example, are now available around the world. Combined with an appropriate image analysis program on a personal computer, there is now the ability to produce and analyze high quality photographs with a modest level of resources. This report is the summary of a variety of efforts, all aimed at investigating the application of commonly available, mass-market photographic and computer equipment to photographic inspection and analysis of equipment and items. It contains results of equipment test and evaluation as well as a few selected example applications.

None

A novel synthesis of the title compound was achieved by direct amination using Vicarious Nucleophilic Substitution (VNS) methodology. Reaction of 1,1,1-trimethylhydrazinium iodide with 3,5-dinitropyrazole in DMSO produces 4-amino-3,s-dinitro-1H-pyrazole as a 1:1 crystal solvate with DMSO. Recrystallization from water yields the monohydrated crystal. Recrystallization of the monohydrate from butyl acetate yields the compound in pure form. Crystallographic data and results of small-scale safety tests are reported. These data indicate that LLM-116 is a promising candidate as an insensitive high explosive.

Time series analysis techniques are applied to wave-front sensor telemetry data from the Lick Adaptive Optics System. For 28 fully-illuminated subapertures, telemetry data of 4096 consecutive slope estimates for each subaperture are available. The primary problem is performance comparison of alternative wave-front sensing algorithms. Using direct comparison of data in open loop and closed-loop trials, we analyze algorithm performance in terms of gain, noise and residual power. We also explore the benefits of multi-input Wiener filtering and analyze the open-loop and closed-loop spatial correlations of the sensor measurements.