The collapse of the Soviet system led to a sharp contraction of state funding for science. Formerly privileged scientists suddenly confronted miserly salaries (often paid late), plummeting social prestige, deteriorating research facilities and equipment, and few prospects for improvement. Many departed the field of science for more lucrative opportunities, both within Russia and abroad. The number of inventions, patent applications, and publications by Russian scientists declined. Reports of desperate nuclear physicists seeking work as tram operators and conducting hunger strikes dramatized the rapid collapse of one of the contemporary world's most successful scientific establishments. Even more alarming was the 1996 suicide of Vladimir Nechai, director of the second largest nuclear research center in Russia (Chelyabinsk-70, now known as Snezhinsk). Nechai, a respected theoretical physicist who spent almost 40 years working on Soviet and Russian nuclear programs, killed himself because he could no longer endure his inability to rectify a situation in which his employees had not been paid for more than 5 months and were ''close to starvation.'' The travails of Russia's scientists sparked interest in the West primarily because of the security threat posed by their situation. The seemingly relentless crisis in science raised fears that disgruntled scientists might …

The contribution of lubrication oil to particulate matter (PM) emissions from a Cummins B5.9 Diesel engine was measured using accelerator mass spectrometry to trace carbon isotope concentrations. The engine operated at fixed medium load (285 N-m (210 ft.lbs.) 1600 m) used 100% biodiesel fuel (B100) with a contemporary carbon-14 ({sup 14}C) concentration of 103 amol {sup 14}C/ mg C. The C concentration of the exhaust C02 and PM were 102 and 99 amol {sup 14}C/mg C, respectively. The decrease in I4C content in the PM is due to the consumption of lubrication oil which is {sup 14}C-free. Approximately 4% of the carbon in PM came from lubrication oil under these operating conditions. The slight depression in CO{sub 2} isotope content could be attributed to ambient CO{sub 2} levels and measurement uncertainty.

We demonstrate the first field trial of optical label-based wavelength switching and packet drop on 476.8km of the National Transparent Optical Network. Subcarrier multiplexed labels control a switch fabric that includes a tunable wavelength converter and arrayed waveguide grating router.

The Plutonium Immobilization Program requires development of the process and plant prototypic equipment to immobilize surplus plutonium in ceramic for long-term storage. Because of the hazardous nature of plutonium, it was necessary to develop a remotely operable materials transfer system which can function within the confines of a glovebox. In support of this work at LLNL, such a material transfer system (MTS) was developed. This paper presents both the mechanical and controls parts making up this system, and includes photographs of the key components and diagrams of their assemblies, as well as a description of the control sequence used to validate the MTS capabilities.

Annually laminated sediments (varves) offer an effective means of acquiring high-quality paleoenvironmental records. However, the strength of a varve chronology can be compromised by a number of factors, such as missing varves, ambiguous laminations, and human counting error. We assess the quality of a varve chronology for the last three millennia from Steel Lake, Minnesota, through comparisons with nine AMS {sup 14}C dates on terrestrial plant macrofossils from the same core. These comparisons revealed an overall 8.4% discrepancy, primarily because of missing/uncountable varves within two stratigraphic intervals characterized by low carbonate concentrations and obscure laminations. Application of appropriate correction factors to these two intervals results in excellent agreement between the varve and {sup 14}C chronologies. These results, together with other varve studies, demonstrate that an independent age-determination method, such as {sup 14}C dating, is usually necessary to verify, and potentially correct, varve chronologies.

Annihilation of extremely energetic cosmic neutrinos on the relic-neutrino background can give rise to absorption lines at energies corresponding to formation of the electroweak gauge boson Z{sup 0}. The positions of the absorption dips are set by the masses of the relic neutrinos. Suitably intense sources of extremely energetic (10{sup 21} - 10{sup 25}-eV) cosmic neutrinos might therefore enable the determination of the absolute neutrino masses and the flavor composition of the mass eigenstates. Several factors--other than neutrino mass and composition--distort the absorption lines, however. We analyze the influence of the time-evolution of the relic-neutrino density and the consequences of neutrino decay. We consider the sensitivity of the lineshape to the age and character of extremely energetic neutrino sources, and to the thermal history of the Universe, reflected in the expansion rate. We take into account Fermi motion arising from the thermal distribution of the relic-neutrino gas. We also note the implications of Dirac vs. Majorana relics, and briefly consider unconventional neutrino histories. We ask what kinds of external information would enhance the potential of cosmic-neutrino absorption spectroscopy, and estimate the sensitivity required to make the technique a reality.

The SAMGrid team is in the process of implementing a monitoring and information service, which fulfills several important roles in the operation of the SAMGrid system, and will replace the first generation of monitoring tools in the current deployments. The first generation tools are in general based on text log-files and represent solutions which are not scalable or maintainable. The roles of the monitoring and information service are: (1) providing diagnostics for troubleshooting the operation of SAMGrid services; (2) providing support for monitoring at the level of user jobs; (3) providing runtime support for local configuration and other information which currently must be stored centrally (thus moving the system toward greater autonomy for the SAMGrid station services, which include cache management and job management services); (4) providing intelligent collection of statistics in order to enable performance monitoring and tuning. The architecture of this service is quite flexible, permitting input from any instrumented SAMGrid application or service. It will allow multiple backend storage for archiving of (possibly) filtered monitoring events, as well as real time information displays and active notification service for alarm conditions. This service will be able to export, in a configurable manner, information to higher level Grid monitoring …

The nonlinear Poisson-Boltzmann (PB) equation is solved using Pseudo Transient Continuation. The PB solver is constructed by modifying the nonlinear diffusion module of a 3D, massively parallel, unstructured-grid, finite element, radiation-hydrodynamics code. The solver also computes the electrostatic energy and evaluates the force on a user-specified contour. Either Dirichlet or mixed boundary conditions are allowed. The latter specifies surface charges, approximates far-field conditions, or linearizes conditions ''regulating'' the surface charge. The code may be run in either Cartesian, cylindrical, or spherical coordinates. The potential and force due to a conical probe interacting with a flat plate is computed and the result compared with direct force measurements by chemical force microscopy.

We present the first results from fully general relativistic numerical studies of thick-disk accretion onto a rapidly-rotating (Kerr) black hole with a spin axis that is tilted (not aligned) with the angular momentum vector of the disk. We initialize the problem with the solution for an aligned, constant angular momentum, accreting thick disk around a black hole with spin a/M = J/M{sup 2} = +0.9 (prograde disk). The black hole is then instantaneously tilted, through a change in the metric, by an angle {beta}{sub 0}. In this Letter we report results with {beta}{sub 0} = 0, 15, and 30{sup o}. The disk is allowed to respond to the Lense-Thirring precession of the tilted black hole. We find that the disk settles into a quasi-static, twisted, warped configuration with Lense-Thirring precession dominating out to a radius analogous to the Bardeen-Petterson transition in tilted Keplerian disks.

Results of the first measurement of {sup 3}P orbitally excited neutral D-meson states, D*{sub 2}{sup 0} and D{sub 1}{sup 0}, produced in hadron collisions at the Tevatron are presented. Using data from the displaced track trigger, CDF II collects a large sample of these states in decay modes D*{sup +} {pi}{sup -}, D{sup +} {pi}{sup -}. Masses and widths of both states have been measured with precision better than or comparable to that of the world average.

We have developed an Integrated Vehicle Simulation Testbed (InVeST). InVeST is based on the concept of Co-simulation, and it allows the development of virtual vehicles that can be analyzed and optimized as an overall integrated system. The virtual vehicle is defined by selecting different vehicle components from a component library. Vehicle component models can be written in multiple programming languages running on different computer platforms. At the same time, InVeST provides full protection for proprietary models. Co-simulation is a cost-effective alternative to competing methodologies, such as developing a translator or selecting a single programming language for all vehicle components. InVeST has been recently demonstrated using a transmission model and a transmission controller model. The transmission model was written in SABER and ran on a Sun/Solaris workstation, while the transmission controller was written in MATRIXx and ran on a PC running Windows NT. The demonstration was successfully performed. Future plans include the applicability of Co-simulation and InVeST to analysis and optimization of multiple complex systems, including those of Intelligent Transportation Systems.

Integrated approaches for the heating and cooling requirements of both the fuel cell (FC) stack and cabin environment are critical to fuel cell vehicle performance in terms of stack efficiency, fuel economy, and cost. An integrated FC system and cabin thermal management system would address the cabin cooling and heating requirements, control the temperature of the stack by mitigating the waste heat, and ideally capture the waste heat and use it for useful purposes. Current work at the National Renewable Energy Laboratory (NREL) details a conceptual design of a metal hydride heat pump (MHHP) for the fuel cell system and cabin thermal management.

We summarize results of several successful dense plasma diagnostics experiments realized by combining two different kinds of table-top soft x-ray lasers with an amplitude division interferometer based on diffraction grating beam splitters. In the first set of experiments this robust high throughput diffraction grating interferometer (DGI) was used with a 46.9 nm portable capillary discharge laser to study the dynamics of line focus and point focus laser-created plasmas. The measured electron density profiles, which differ significantly from those expected from a classical expansion, unveil important two-dimensional effects of the dynamics of these plasmas. A second DGI customized to operate in combination with a 14.7 nm Ni-like Pd transient gain laser was used to perform interferometry of line focus laser-created plasmas with picosecond time resolution. These measurements provide valuable new benchmarks for complex hydrodynamic codes and help bring new understanding of the dynamics of dense plasmas. The instrumentation and methodology we describe is scalable to significantly shorter wavelengths, and constitutes a promising scheme for extending interferometry to the study of very dense plasmas such as those investigated for inertial confinement fusion.

Fermilab's hadron physics research continues in all its accelerator-based programs. These efforts will be identified, and the optimization of the Fermilab schedules for physics will be described. In addition to the immediate plans, the Fermilab Long Range Plan will be cited, and the status and potential role of a new proton source, the Proton Driver, is described.

Superovulation of female mice with exogenous gonadotrophins is routinely used for increasing the number of eggs ovulated by each female in reproductive and developmental studies. We report an unusual effect of superovulation on fertilization in mice. In vivo matings of superovulated T-stock females with B6C3F1 males resulted in a 2-fold reduction (P<0.001) in the frequencies of fertilized eggs compared to control B6C3F1 matings. In addition, {approx}22 hr after mating only 15% of fertilized eggs recovered in T-stock females had reached the metaphase stage of the first cleavage division versus 87% in B6C3F1 females (P < 0.0001). Matings with T-stock males did not improve the reproductive performance of T-stock females. To investigate the possible cause(s) for the impaired fertilization and zygotic development, the experiments were repeated using in vitro fertilization. Under these conditions, the frequencies of fertilized eggs were not different in superovulated T-stock and B6C3F1 females (51.7% {+-} 6.0 and 64.5% {+-}3.8, P=0.10). There was a 7-fold increase in the frequencies of fertilized T-stock eggs that completed the first cell cycle of development after in vitro versus in vivo fertilization. These results rule out an intrinsic deficiency of the T-stock oocyte as the main reason for the impaired fertility after …

Although healthy dentin is invariably hydrated in vivo, from a perspective of examining the mechanisms of fracture in dentin, it is interesting to consider the role of water hydration. Furthermore, it is feasible that exposure to certain polar solvents, e.g., those found in clinical adhesives, can induce dehydration. In the present study, in vitro deformation and fracture experiments, the latter involving a resistance-curve (R-curve) approach (i.e., toughness evolution with crack extension), were conducted in order to assess changes in the constitutive and fracture behavior induced by three common solvents - acetone, ethanol and methanol. In addition, nanoindentation-based experiments to evaluate the deformation behavior at the level of individual collagen fibers and ultraviolet Raman spectroscopy to evaluate changes in bonding were performed. The results indicate a reversible effect of chemical dehydration, with increased fracture resistance, strength, and stiffness associated with lower hydrogen bonding ability of the solvent. These results are analyzed both in terms of intrinsic and extrinsic toughening phenomena to further understand the micromechanisms of fracture in dentin and the specific role of water hydration.

Results from simulated experiments in several laboratories show that host sediments influence hydrate formation in accord with known heterogeneity of host sediments at sites of gas hydrate occurrence (1). For example, in Mackenzie Delta, NWT Canada (Mallik 2L-38 well), coarser-grained units (pore-filling model) are found whereas in the Gulf of Mexico, the found hydrate samples do not appear to be lithologically controlled. We have initiated a systematic study of sediments, initially focusing on samples from various depths at a specific site, to establish a correlation with hydrate occurrence (or variations thereof) to establish differences in their microstructure, porosity, and other associated properties. The synchrotron computed microtomography (CMT) set-up at the X-27A tomography beam line at the National Synchrotron Light Source (NSLS), Brookhaven National Laboratory was used as a tool to study sediments from Blake Ridge at three sub bottom depths of 0.2, 50, and 667 meters. Results from the tomographic analysis of the deepest sample (667 m) are presented here to illustrate how tomography can be used to obtain new insights into the structures of methane hydrate host sediments. The investigation shows the internal grain/pore space resolution in the microstructure and a 3-D visualization of the connecting pathways obtained following …

I provide a review of observations in the optical, UV (HST), and EUV (EUVE and Chandra LETG) of the rapid periodic oscillations of nonmagnetic, disk-accreting, high mass-accretion rate cataclysmic variables (CVs), with particular emphasis on the dwarf nova SS Cyg in outburst. In addition, I drawn attention to a correlation, valid over nearly six orders of magnitude in frequency, between the frequencies of the quasi-periodic oscillations (QPOs) of white dwarf, neutron star, and black hole binaries. This correlation identifies the high frequency quasi-coherent oscillations (so-called ''dwarf nova oscillations'') of CVs with the kilohertz QPOs of low mass X-ray binaries (LMXBs), and the low frequency and low coherence QPOs of CVs with the horizontal branch oscillations (or the broad noise component identified as such) of LMXBs. Assuming that the same mechanisms produce the QPOs of white dwarf, neutron star, and black hole binaries, this correlation has important implications for QPO models.

We have designed and built a six-band multi-spectral NIR imaging system used in clinical testing on cancer patients. From our layered tissue model, we create blood volume and blood oxygenation images for patient treatment monitoring.

Chemical inhibition of laminar propane flames by organophosphorus compounds has been studied experimentally, using a laboratory Mache Hebra nozzle burner and a flat flame burner with molecular beam mass spectrometry (MBMS), and with a computational flame model using a detailed chemical kinetic reaction mechanism. Both fuel-lean and fuel-rich propane flames were studied to examine the role of equivalence ratio in flame inhibition. The experiments examined a wide variety of organophosphorus compounds. We report on the experimental species flame profiles for tri-methyl phosphate (TMP) and compare them with the species flame profile results from modeling of TMP and di-methyl methyl phosphonate (DMMP). Both the experiments and kinetic modeling support and illustrate previous experimental studies in both premixed and non-premixed flames that inhibition efficiency is effectively the same for all of the organophosphorus compounds examined, independent of the molecular structure of the initial inhibitor molecule. The chemical inhibition is due to reactions involving the small P-bearing species HOPO{sub 2} and HOPO that are produced by the organophosphorus compounds (OPCs). The ratios of the HOPO{sub 2} and HOPO concentrations differ between the lean and rich flames, with HOPO{sub 2} dominant in lean flames while HOPO dominates in rich flames. The resulting HOPO{sub 2} …

Refractive index changes have been induced inside bulk fused silica by using femtosecond (fs) laser pulses tightly focused inside the material. Waveguides have been fabricated inside the glass by scanning the glass with respect to the focal point of the laser beam. The refractive index change is estimated to be {approx} 10{sup -4}. Other more complex three-dimensional structures have also been fabricated (curved waveguides, splitters, and interferometers). We also report on fluorescence spectroscopy of the fs-modified fused silica using a confocal microscopy setup. Using a 488 nm excitation source, a fluorescence at 630 nm is observed from the modified glass, which is attributed to the presence of non-bridging oxygen hole center (NBOHC) defects created by the fs pulses. The fluorescence decays with prolonged exposure to the 488 nm light, indicating that the defects are being photobleached by the excitation light.

We are currently developing a component based, parallel visualization and graphical analysis tool for visualizing and analyzing data on two- and three-dimensional (20, 30) meshes. The tool consists of three primary components: a graphical user interface (GUI), a viewer, and a parallel compute engine. The components are designed to be operated in a distributed fashion with the GUI and viewer typically running on a high performance visualization server and the compute engine running on a large parallel platform. The viewer and compute engine are both based on the Visualization Toolkit (VTK), an open source object oriented data manipulation and visualization library. The compute engine will make use of parallel extensions to VTK, based on MPI, developed by Los Alamos National Laboratory in collaboration with the originators of P K . The compute engine will make use of meta-data so that it only operates on the portions of the data necessary to generate the image. The meta-data can either be created as the post-processing data is generated or as a pre-processing step to using VisIt. VisIt will be integrated with the VIEWS' Tera-Scale Browser, which will provide a high performance visual data browsing capability based on multi-resolution techniques.

Use of carbon in tokamaks leads to a major tritium retention issue due to co-deposition. To investigate this process a low power (no beams) L-mode experiment was performed on DIII-D in which {sup 13}CH{sub 4} was puffed into the main vessel through the toroidally-symmetric pumping plenum at the top of lower single-null discharges. Subsequently, the {sup 13}C content of tiles taken from the vessel wall was measured. The interpretive OEDGE code was used to model the results. It was found that the {sup 13}C deposition pattern is controlled by: (a) source strength of {sup 13}C{sup +}, (b) radial location of the {sup 13}C{sup +} source, (c) D{sub {perpendicular}}, (d) M{sub {parallel}}, the scrape-off layer parallel Mach number. Best agreement was found for (a) {approx}50% conversion efficiency {sup 13}CH{sub 4} {yields} {sup 13}C{sup +}, (b) {sup 13}C{sup +} source {approx}3.5 cm outboard of separatrix near {sup 13}CH{sub 4} injection location, (c)D{sub {perpendicular}} {approx} 0.3 m{sup 2}s{sup -1}, (d) M{sub {parallel}} {approx} 0.4 toward inside.

Over the past several years, there has been a great deal of research effort and funding put into the deployment of optical-based, advanced technology wide-area networks. Fermilab and CalTech have initiated a project to enable our production network facilities to exploit these advanced research network facilities. Our objective is to forward designated data transfers across these advanced wide area networks on a per-flow basis, making use our capacious production-use storage systems connected to the local campus network. To accomplish this, we intend to develop a dynamically provisioned forwarding service that would provide alternate path forwarding onto available wide area advanced research networks. The service would dynamically reconfigure forwarding of specific flows within our local production-use network facilities, as well as provide an interface to enable applications to utilize the service. We call this service LambdaStation. If one envisions wide area optical network paths as high bandwidth data railways, then LambdaStation would functionally be the railroad terminal that regulates which flows at the local site get directed onto the high bandwidth data railways. LambdaStation is a DOE-funded SciDac research project in its very early stage of development.