None

This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol Operations Center. This document reflects the as-built requirements for the system that was delivered by GTE Northwest, Inc. This system provided a commercial off-the-shelf computer-aided dispatching system and alarm monitoring system currently in operations at the Hanford Patrol Operations Center, Building 2721E. This system also provides alarm back-up capability for the Plutonium Finishing Plant (PFP).

This document provides the test procedures for cold testing of the prototype Hot Conditioning System (HCS) at the 306E Facility. The primary objective of this testing is to confirm design choices and provide data for the detailed design package prior to procurement of the process equipment. The current scope of testing in this document includes a fabricability study of the HCS, equipment performance testing of the HCS components, heat-up and cool-down cycle simulation, and robotic arm testing.

I consider N = 1 supersymmetric SU(N{sub c}) gauge theories with matter fields consisting of one antisymmetric representation, five flavors, and enough antifundamental representations to cancel the gauge anomaly. Previous analyses are extended to the case of even N{sub c} with no superpotential. Using holomorphy I show that the theory has an interacting infrared fixed point for sufficiently large N{sub c}. These theories are interesting due to the fact that in going from five to four flavors the theory goes from a non-trivial infrared fixed point to confinement, in contradistinction to SUSY QCD, but in analogy to the behavior expected in non-SUSY QCD.

Candidate immobilization forms for the disposal of surplus weapons-useable are being tested and characterized. The goal of the testing program was to provide sufficient data that, by August 1997, an informed selection of a single immobilization form could be made so that the form development and production R and D could be more narrowly focused. Two forms have been under consideration for the past two years: glass and ceramic. In August, 1997, the Department of Energy (DOE) selected ceramic for plutonium disposition, halting further work on the glass material. In this paper, we will briefly describe these two waste forms, then describe our characterization techniques and testing methods. The analytical methods used to characterize altered and unaltered samples are the same. A full suite of microscopic techniques is used. Techniques used include optical, scanning electron, and transmission electron microscopies. For both candidate immobilization forms, the analyses are used to characterize the material for the presence of crystalline phases and amorphous material. Crystalline materials, either in the untested immobilization form or in the alteration products from testing, are characterized with respect to morphology, crystal structure, and composition. The goal of these analyses is to provide data on critical issues such as …

None

We examined the progression of the Rayleigh-Taylor (RT) instability from an initial multimode perturbation. The RT experiments focused on the transition from the linear to non-linear regimes for perturbation growth at an embedded, or classical, interface. The multimode experiments have attempted to observe the process of bubble competition wherein neighboring structures either continue to rise or are washed downstream in the flow depending upon; their relative size. This competition is predicted to result in an inverse cascade at late times where progressively larger structures will begin to dominate the flow. Experiments to date have shown evidence of coupled modes arising, but have not yet accelerated the interface long enough to produce the several generations of coupling required for a true inverse cascade.

This Project Management Plan defines the cost, scope, schedule, organizational responsibilities, and work breakdown structure for the removal of the Federal Republic of Germany (FRG) Sealed Isotopic Heat Sources from the 324 Building and placed in interim storage at the Central Waste Complex (CWC).

The US is developing a strategy for the disposition of surplus weapons-usable uranium-233 ({sup 233}U). The strategy (1) identifies the requirements for the disposition of surplus {sup 233}U; (2) identifies potential disposition options, including key issues to be resolved with each option; and (3) defines a road map that identifies future key decisions and actions. The disposition of weapons-usable fissile materials is part of a US international arms-control program for reduction of the number of nuclear weapons and the quantities of nuclear-weapons-usable materials worldwide. The disposition options ultimately lead to waste forms requiring some type of geological disposal. Major options are described herein.

Equation of State (EOS) data is a necessary requirement for the simulation of many dynamic processes, including shock wave propagation, high velocity impact, laser-matter interaction, laser medicine, x-ray deposition and planetary and stellar interior evolution. Realistic simulations require high accuracy and smoothness in the EOS. In addition, some processes require independent ionic, electronic and radiation physics. In order to meet these needs, we have implemented a new EOS data library that is platform independent, hierarchically structured and easily extensible for future development. We have just begun our user testing phase and are considering future improvements.

On June 8, 1994, the Office of Inspections, Office of Inspector General (OIG), Department of Energy (DOE), received a letter dated May 31, 1994, from a complainant concerning the Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory. The complainant alleged that the NMSF, completed in 1987, was so poorly designed and constructed that it was never usable and that DOE proposed to gut the entire facility and sandblast the walls. According to the complainant, ``these errors are so gross as to constitute professional malpractice in a commercial design setting.`` The complainant further stated that ``DOE proposes to renovate this facility to store large amounts of plutonium (as much as 30 metric tons, by some accounts), and it is imperative that the public receive some assurance that this waste will not recur and that the facility will be made safe.`` The purpose of our inspection was to determine if the allegations regarding the design and construction of the NMSF were accurate, and if so, to determine if the Government could recover damages from the Architect/Engineer and/or the construction contractor. We also reviewed the Department`s proposed actions to renovate the NMSF.

Electron beam curing of composites is a nonthermal, nonautoclave curing process offering the following advantages compared to conventional thermal curing: substantially reduced manufacturing costs and curing times; improvements in part quality and performance; reduced environmental and health concerns; and improvements in material handling. In 1994 a Cooperative Research and Development Agreement (CRADA), sponsored by the Department of Energy Defense Programs and 10 industrial partners, was established to advance electron beam curing of composites. The CRADA has successfully developed hundreds of new toughened and untoughened resins, offering unlimited formulation and processing flexibility. Several patent applications have been filed for this work. Composites made from these easily processable, low shrinkage material match the performance of thermal cured composites and exhibit: low void contents comparable to autoclave cured composites (less than 1%); superb low water absorption values in the same range as cyanate esters (less than 1%); glass transition temperatures rivaling those of polyimides (greater than 390 C); mechanical properties comparable to high performance, autoclave cured composites; and excellent property retention after cryogenic and thermal cycling. These materials have been used to manufacture many composite parts using various fabrication processes including hand lay-up, tow placement, filament winding, resin transfer molding and vacuum assisted …

The connection between data warehousing and the metadata. used to catalog and locate warehouse data is obvious, but what is the connection between data warehousing, metadata, and the World Wide Web (WWW)? Specifically, the WWW can be used to allow users to search metadata (data about the data) and retrieve data from a warehouse database. In addition, the Internet/Intranet can be used to manage the metadata in archive databases and to streamline the database administration functions of a large archive center. The Oak Ridge National Laboratory`s (ORNL`s) Distributed Active Archive Center (DAAC) is a data archive and distribution center for the National Air and Space Administration`s (NASA`s) Earth Observing System Data and Information System (EOSDIS); the ORNL DAAC provides access to tabular and imagery datasets used in ecological and environmental research. To support this effort, we have taken advantage of the rather unique and user-friendly features of the WWW to (1) allow users to search for and download the data we archive and (2) provide DAAC developers with effective metadata and data management tools. In particular, the ORNL DAAC has developed the Biogeochemical Information Ordering Management Environment (BIOME), a WWW search-and-order system, as well as a WWW-based database administrator`s (DBA`s) …

This Acceptance Test Procedure (ATP) will test and verify that the Exhauster meets the specified functional requirements, safety requirements, operating requirements, and provide a record of the functional test results. The system/functions that will be tested are listed in the scope section of the Acceptance Test Procedure.

We study budget constrained optimal network upgrading problems. Such problems aim at finding optimal strategies for improving a network under some cost measure subject to certain budget constraints. A general problem in this setting is the following. We are given an edge weighted graph G = (V, E) where nodes represent processors and edges represent bidirectional communication links. The processor at a node v {element_of} V can be upgraded at a cost of c(v). Such an upgrade reduces the delay of each link emanating from v. The goal is to find a minimum cost set of nodes to be upgraded so that the resulting network has the best performance with respect to some measure. We consider the problem under two measures, namely, the weight of a minimum spanning tree and the bottleneck weight of a minimum bottleneck spanning tree. We present approximation and hardness results for the problem. Our results are tight to within constant factors. We also show that these approximation algorithms can be used to construct good approximation algorithms for the dual versions of the problems where there is a budget constraint on the upgrading cost and the objectives are minimum weight spanning tree and minimum bottleneck weight …

A laser drive plate, that is a dense solid plate drive by a laser heated, lower density plasma, is inherently Raleigh-Taylor (R-T) unstable, We have previously indicated that observed surface perturbation on the plate are probably R-T instabilities, initiated by the mode structure of the driving laser beam. Using a semi- transparent impact target viewed with a polarized Epi-Illuminated Confocal Streak Microscope, has allowed us to measure the amplitude and growth of the instability.

The objective is to develop proposals to obtain funding for development of a 2nd Generation Flywheel Battery Prototype designed for a specific application.

An early prototype of the core software for on-line computing systems for the PHENIX detector at RHIC has been developed using the Shlaer-Mellor OOA/RD method, including the automatic generation of C++ source code using a commercial translation engine and {open_quotes}architecture{close_quotes}.

The objectives of this cooperative agreement are to develop the oxyhydrochlorination (OHC) process for the conversion of methane to methyl chloride. In the first Phase of the project, Dow Corning has developed a stable selective catalyst and demonstrated the technology on a laboratory and a pilot plant scale. Specific tasks to achieve these objectives have been developed as follows: TASK 1 Fundamental Technical and Economic Evaluation TASK 2 Catalyst Selection Optimization and Characterization Studies TASK 3 Pilot Plant Design TASK 4 Pilot Plant Detailed Engineering, Procurement and Construction TASK 5 Pilot Plant Startup and Operation TASK 6 Pilot Plant Process Optimization TASK 7 Pilot Plant Extended Operation TASK 8 Pilot Plant Economic Evaluation/Scale-up Decision Significant progress has been completed in Task 1 with the objective to complete a fundamental technical and economic evaluation of learning gathered the Phase I effort of this project. A decision to proceed with the project will be made after completion of this Task. A computer model of the reactor system has been developed, which includes heat and mass transfer effects as well as reactions. Model validation is in progress. The Absorber/Stripper technology evaluated and implemented on the Phase I PDU to recover chlorocarbons (including methyl …

The field acceptance test of a 75 HP mixer pump (Hazleton serial number N-20801) installed in Tank 241-AN-107 was conducted from October 1995 thru February 1996. The objectives defined in the acceptance test were successfully met, with two exceptions recorded. The acceptance test encompassed field verification of mixer pump turntable rotation set-up and operation, verification that the pump instrumentation functions within established limits, facilitation of baseline data collection from the mixer pump mounted ultrasonic instrumentation, verification of mixer pump water flush system operation and validation of a procedure for its operation, and several brief test runs (bump) of the mixer pump.

All elements of the research triad in this country - universities, federal laboratories, and industrial labs - have spent a good part of the last decade in a very changeable and changing environment. In the area of partnerships with industry there have been a lot of experiments, such as the Advanced Technology Program (ATP), the Technology Reinvestment Program (TRP), and the Department of Energy`s (DOE) analog, the Technology Transfer Initiative (TM). We now have, at least in principle, gained enough experience with cross-sector partnerships to make some observations on what works and what doesn`t. My judgments are preliminary and driven by the idiosyncrasies of my own lab. I think the general themes at Livermore are reflected in other DOE national security labs and, at least to some extent, in other federal labs. Although we share some features in common with universities and industrial labs, I think the nature of our funding sources, and the way in which we are affected by global political factors such as the Cold War, pose a somewhat special set of circumstances for our institutions.

A phase separated (amorphous) glass has been developed which allows very efficient recovery of +4 valence actinides. The total amount of crystal formation in a heat treated vycor-type glass can be controlled with time, temperature and loading. Heat treatments at lower temperatures and for less time inhibit crystal formation while still allowing significant phase separation. If the Thorium loading exceeds 10 weight percent oxide, crystal formation during heat treatment may not be avoided. The total amount of crystal growth has a direct affect on thorium leachability. An increase in crystal formation limits the Th recovery significantly. High thorium loaded glasses (15 weight percent) with heat treatments (increased crystal formation) leach at approximately the same rate as non-heat treated glasses. A phase separated (amorphous) glass has been produced using thorium as a surrogate for neptunium. Two different homogeneous vycor compositions targeting 10 and 15 weight percent thorium oxide have been processed, heat treated and leached with concentrated nitric acid at 110{degrees}C. Thorium recovery rates have been shown to be considerably better when the glass has been heat treated inducing phase separation that is relatively crystal free. Non-heat treated and crystalline (due to heat treatment) glasses have similar Th recovery rates with …

Preliminary CDF results on inclusive momentum distributions of charged particles in high transverse momentum jets produced in {anti p}p collisions at {radical}s=1.8 TeV at the Tevatron are presented and compared with QCD predictions based on the Modified Leading Log Approximation.

On November 1, 1996 the U.S. Department of Energy (DOE), Richland Operations Office (RL) approved the Flammable Gas Unreviewed Safety Question (USQ) (Wagoner 1996). The Tank Waste Remediation System issued (Hall 1996) two standing orders (96-36 East; and 96-34 West) to implement the requirements and authorization for continued operations included in the RL letter (Wagoner 199E). These standing orders included several requirements for the control of ignition sources (Appendix B, Section 7.0 ``Ignition Source Controls``) that include requirements for the design and operation of ``...equipment and materials used in the conduct of work...`` in Tank Farms. A verbatim compliance review of these ignition source controls identified several pieces of equipment and materials which have been used routinely in Tanks Farms for many years in support of safe operation that either could not: meet the equivalent design or safety provisions included in the standing orders (Hall 1996), or 21. be modified in a timely manner to meet safety and programmatic commitments. When the standing order was prepared it was anticipated that there would be a need to approve temporary exceptions. Appendix B, Section 7.0 of the standing order (Hall 1996) reads in part as follows: ``For activities where compliance will require …