None

This report summarizes the work done in the last contract period. Previous work has been described in Annual Performance Reports. The work carried on under this Research Grant and not included in previous progress and annual reports includes two distinct items. One work is a study of the nonlocal high beta microstability of the FRC (Field Reversed Configuration), which they began sometime ago. This study identified the limiting beta (=4{pi}nT/B{sup 2}) for the mode to remain unstable. The study found that as beta increases, the wavenumbers (k{sub y}, K{sub z}) for maximum growth changes, so that the limiting beta is not the one found by fixing (k{sub y}, K{sub z}) and increasing beta. It also appears that the criterion for nonlocal terms to influence the result, as beta increases, is substantially weaker than might have been thought. The authors identify the parameter that determines this effect. This study is presented as Appendix 1 of this report. The second study is of the effect of collisions on the lower hybrid drift instability. The result is that the effect of collisions is substantially more important than might have been expected. These two studies are in different stages of completion. The second is …

The conservation of African elephants has been controversial recently on two fronts: the Convention on International Trade in Endangered Species (CITES, to which the United States is a party), and a Zimbabwean program for sustainable development called CAMPFIRE, which is partially funded by the U.S. Agency for International Development (USAID). Two controversies have sprung up recently about the African elephant. One is the changing status of this species under the Convention on International Trade in Endangered Species (CITES), of which the United States is a signatory. The other is over a program in Zimbabwe called "CAMPFIRE." The partial funding of this program by the U.S. Agency for International Development has been criticized by animal welfare groups and some conservation groups, though it has been supported by other conservation groups as well as many hunting organizations.

We present results on the magnetic reversal process in epitaxial Sm-Co (1{bar 1}00)/TM (TM = Fe, Co) bilayer films prepared via magnetron sputtering onto Cr-buffered single-crystal MgO substrates. The magnetically hard Sm-Co films have 20-T uniaxial anisotropy and coercivities >3 T at room temperature. The magnetization of the soft layer is pinned at the interface to the hard-magnet layer and switches reversibly as expected for an exchange-spring magnet. With increasing soft layer thickness, the coercive field of the hard layer becomes significantly less than that of a single layer. We also present numerical solutions of a one-dimensional model that provide the spin configuration for each atomic layer. Comparison of the experimental results with the model simulations indicates that the exchange-spring behavior of our bilayer films can be understood from the intrinsic parameters of the hard and soft layers.

In this paper, we review some of the work our group has done in the past few years to obtain the electron self-energy of high temperature superconductors by analysis of angle-resolved photoemission data. We focus on three examples which have revealed: (1) a d-wave superconducting gap, (2) a collective mode in the superconducting state, and (3) pairing correlations in the pseudogap phase. In each case, although a novel result is obtained which captures the essence of the data, the conventional physics used leads to an incomplete picture. This indicates that new physics needs to be developed to obtain a proper understanding of these materials.

Ceramic matrix composites are being developed for numerous high temperature applications, including rotors and combustors for advanced turbine engines, heat exchanger and hot-gas filters for coal gasification plants. Among the materials of interest are silicon-carbide-fiber-reinforced-silicon-carbide (SiC{sub (f)}/SiC), silicon-carbide-fiber-reinforced-silicon-nitride (SiC{sub (f)}/Si{sub 3}N{sub 4}), aluminum-oxide-reinforced-alumina (Al{sub 2}O{sub 3(f)}/Al{sub 2}O{sub 3}), etc. In the manufacturing of these ceramic composites, the conditions of the fiber/matrix interface are critical to the mechanical and thermal behavior of the component. Defects such as delaminations and non-uniform porosity can directly effect the performance. A nondestructive evaluation (NDE) method, developed at Argonne National Laboratory has proved beneficial in analyzing as-processed conditions and defect detection created during manufacturing. This NDE method uses infrared thermal imaging for fill-field quantitative measurement of the distribution of thermal diffusivity in large components. Intensity transform algorithms have been used for contrast enhancement of the output image. Nonuniformity correction and automatic gain control are used to dynamically optimize video contrast and brightness, providing additional resolution in the acquired images. Digital filtering, interpolation, and least-squares-estimation techniques have been incorporated for noise reduction and data acquisition. The Argonne NDE system has been utilized to determine thermal shock damage, density variations, and variations in fiber coating in a full …

Glass-bonded zeolite is being considered as a candidate ceramic waste form for storing radioactive isotopes separated from spent nuclear fuel in the electrorefining process. To determine the stability of glass-bonded zeolite under irradiation, transmission electron microscope samples were irradiated using high energy helium, lead, and krypton. The major crystalline phase of the waste form, which retains alkaline and alkaline earth fission products, loses its long range order under both helium and krypton irradiation. The dose at which the long range crystalline structure is lost is about 0.4 dpa for helium and 0.1 dpa for krypton. Because the damage from lead is localized in such a small region of the sample, damage could not be recognized even at a peak damage of 50 dpa. Because the crystalline phase loses its long range structure due to irradiation, the effect on retention capacity needs to be further evaluated.

Innovative, cost-effective technologies that have a positive life-cycle environmental impact and yield marketable products are needed to meet the challenges of the recycling industry. Four materials-recovery technologies that are being developed at Argonne National Laboratory in cooperation with industrial partners are described in this paper: (1) dezincing of galvanized steel scrap; (2) material recovery from auto-shredder residue; (3) high-value-plastics recovery from obsolete appliances; and (4) aluminum salt cake recycling. These technologies are expected to be applicable to the production of low-cost, high-quality raw materials from a wide range of waste streams.

This report presents a brief description of the five methods used to bring proposed legislation to the House floor for consideration.

The computer code LATIS is used to simulate midplane and backplane spallation resulting from short pulsed laser absorption. A 1-D planar geometry is simulated with an exponential laser absorption profile. The laser pulse length is assumed to be much shorter than the sound transit time across the laser absorption length. The boundary conditions are a fixed front plane and free backplane (backplane spall) and a free front plane and a fixed midplane (midplane spall). The NBS/NRC equation of state for water is used with a self- consistent yet empirical material strength and failure model. The failure model includes the effects of void nucleation, growth and coalescence. Definite signatures of the nucleation and coalescence thresholds are found in the back surface motion for backplane spallation.

This paper reviews the All Russian Scientific Research Institute of Experimental Physics open publications on hydrodynamic instability in strong media.

This report summarizes work performed under contract No. DE-FC07-94ID13283, {open_quotes}Advanced Power Conversion Based on the Aerocapacitors{trademark}.{close_quotes} Under this contract high power density, high energy density, organic electrolyte Aerocapacitors{trademark} were developed and characterized for power conversion applications. Pilot facilities for manufacturing prototype AA-size Aerocapacitors{trademark} were put in place. The low ESR and good frequency response of these devices show that they are ideal components for high discharge rate and low to moderate frequency (< 10 kHz) applications such as power conversion.

Unsupported molybdenum nitride (Mo{sub 2}N) and molybdenum carbide supported on alumina (Mo{sub 2}C/Al{sub 2}O{sub 3}) were compared against commercial sulfided MoS{sub 2}/Al{sub 2}O{sub 3} and Ni-Mo-S/Al{sub 2}O{sub 3} for hydrotreating coal-derived gas oil at 633 K (360 {degrees}C) and 13.7 MPa (2000 psig). When the catalytic rates were compared on the basis of active sites measured by chemisorption, the nitrides and carbides were estimated to have activities as much as five times that of Ni-Mo-S/Al{sub 2}O{sub 3} and MoS{sub 2}/Al{sub 2}O{sub 3}. The comparison was based on sites titrated by CO on the carbide and nitride and by O{sub 2} on the sulfided catalysts. The gas oil product quality from the carbide and nitride catalysts was significantly better than the thermal blank, indicating that the materials were active under practical hydrotreating conditions. X-ray photoelectron spectroscopy analysis after reaction of the Mo{sub 2}N and Mo{sub 2}C/Al{sub 2}O{sub 3} catalysts indicated that surface sulfiding was not extensive.

One of the major functions of the Tank Waste Remediation System (TWRS) is to characterize wastes in support of waste management and disposal activities at the Hanford Site. Analytical data from sampling and analysis, along with other available information about a tank, are compiled and maintained in a tank characterization report (TCR). This report and its appendices serve as the TCR for double-shell tank 241-AW-105. The objectives of this report are to use characterization data in response to technical issues associated with tank 241-AW-105 waste; and to provide a standard characterization of this waste in terms of a best-basis inventory estimate. The response to technical issues is summarized in Section 2.0, and the best-basis inventory estimate is presented in Section 3.0. Recommendations regarding safety status and additional sampling needs are provided in Section 4.0. Supporting data and information are contained in the appendices. This report supports the requirements of the Hanford Federal Facility Agreement and Consent Order milestone Characterization. information presented in this report originated from sample analyses and known historical sources. While only the results of a recent sampling event will be used to fulfill the requirements of the data quality objectives (DQOs), other information can be used to …

Microscopic modeling of multi-lane traffic is usually done by applying heuristic lane changing rules, and often with unsatisfying results. Recently, a cellular automation model for two-lane traffic was able to overcome some of these problems and to produce a correct density inversion at densities somewhat below the maximum flow density. In this paper, the authors summarize different approaches to lane changing and their results, and propose a general scheme, according to which realistic lane changing rules can be developed. They test this scheme by applying it to several different lane changing rules, which, in spite of their differences, generate similar and realistic results. The authors thus conclude that, for producing realistic results, the logical structure of the lane changing rules, as proposed here, is at least as important as the microscopic details of the rules.

The Vapor Issue Resolution Program tasked the Vapor Team (VT) to collect representative headspace samples from Hanford Site single-shell tank (SST) 241-S-106. This document presents In Situ vapor Sampling System (ISVS) data resulting from the June 13, 1996 sampling of SST 241-S-106. Analytical results will be presented in separate reports issued by the Pacific Northwest National Laboratory (PNNL) which`supplied and analyzed the sample media.

This document includes Conceptual Design Report (CDR) for extension of existing Raw and Potable systems from 200-East Area systems to two new private contractor facilities for immobilization and disposal of low-activity waste (LAW). The work will include design and installation of almost 3400 m (11,200 ft) of raw water pipe and 2200 in (7,300 ft) of potable water pipe.

The Waste Information Requirements Document describes the activities of the Tank Waste Remediation System (TWRS) Characterization Project that provide characterization information on Hanford Site waste tanks. The characterization information is required to perform operations and meet the commitments of TWRS end users. These commitments are derived from the Hanford Federal Facility Agreement and Consent Order, also known as the Tri-Party Agreement; the Recommendation 93-5 Implementation Plan to the Defense Nuclear Facilities Safety Board (DNFSB); and other directives as listed in Section 4.0. This Waste Information Requirement Document applies to Fiscal Years 1997 and 1998 activities. Its contents are based on the best information available in August 1997. The format and content are based on the directions of DOE-RL (Sieracki, 1997) and Fluor Daniel Hanford Incorporated (Umek, 1997). Activities, such as the revision of the Tank Characterization Technical Sampling Basis (Brown et al. 1997), the revision of the data quality objectives (DQOs), issue closures, discussions with Ecology, and management decisions may cause subsequent updates to the Waste Information Requirements Document.

The Department of Energy`s (DOE) Office of Science and Technology Decontamination and Decommissioning (D&D) Focus Area, led by the Federal Energy Technology Center, has been charged with improving upon baseline D&D technologies with the goal of demonstrating and validating more cost-effective and safer technologies to characterize, deactivate, survey, decontaminate, dismantle, and dispose of surplus structures, buildings, and their contents at DOE sites. The D&D Focus Area`s approach to verifying the benefits of the improved D&D technologies is to use them in large-scale technology demonstration (LSTD) projects at several DOE sites. The Fernald Environmental Management Project (FEMP) was selected to host one of the first three LSTD`s awarded by the D&D Focus Area. The FEMP is a DOE facility near Cincinnati, Ohio, that was formerly engaged in the production of high quality uranium metal. The FEMP is a Superfund site which has completed its RUFS process and is currently undergoing environmental restoration. With the FEMP`s selection to host an LSTD, the FEMP was immediately faced with some challenges. The primary challenge was that this LSTD was to be integrated into the FEMP`s Plant 1 D&D Project which was an ongoing D&D Project for which a firm fixed price contract had been …

The Vapor Issue Resolution Program tasked the Vapor Team (the team) to collect representative headspace samples from Hanford Site single-shell tank (SST) 241-B-102. This document presents sampling data resulting from the April 18, 1996 sampling of SST 241-B-102. Analytical results will be presented in a separate report issued by Pacific Northwest National Laboratory (PNNL), which supplied and analyzed the sampling media. The team, consisting of Sampling and Mobile Laboratories (SML) and Special Analytical Studies (SAS) personnel, used the vapor sampling system (VSS) to collect representative samples of the air, gases, and vapors from the headspace of SST 241-B-102 with sorbent traps and SUMMA canisters.

The Vapor Issue Resolution Program tasked the Vapor Team (VT) to collect representative headspace samples from Hanford Site single-shell tank (SST) 241-B-105. This document presents In Situ Vapor Sampling System (ISVS) data resulting from the July 30, 1996 sampling of SST 241-B-105. Analytical results will be presented in separate reports issued by the Pacific Northwest National Laboratory (PNNL) which supplied and analyzed the sample media.

This document is the analytical laboratory report for tank 241-AN-104 push mode core segments collected between August 8, 1996 and September 12, 1996. The segments were subsampled and analyzed in accordance with the Tank 241-AAr-1 04 Push Mode Core Sampling and Analysis Plan (TSAP) (Winkleman, 1996), the Safety Screening Data Quality Objective (DQO) (Dukelow, et at., 1995) and the Flammable Gas Data Quality Objective (DQO) (Benar, 1995). The analytical results are included in a data summary table. None of the samples submitted for Differential Scanning Calorimetry (DSC), Total Alpha Activity (AT), Total Organic Carbon (TOC) and Plutonium analyses (239,240 Pu) exceeded notification limits as stated in the TSAP. The statistical results of the 95% confidence interval on the mean calculations are provided by the Tank Waste Remediation Systems Technical Basis Group in accordance with the Memorandum of Understanding (Schreiber, 1997) and not considered in this report.

As part of international agreement between the United States and Russia, a significant amount of plutonium requires disposition. One of the disposition paths is to immobilize it and dispose of it in a geological repository. The two favored immobilization forms are glass and ceramic. The plutonium, as an oxide, would be reacted with the glass or ceramic to form a homogeneousmaterial. The resulting solid product would then be encased in High-Level Waste (1-ILW)glass for the can-in-canister option. The HLW glass gives a radiation barrier to increase proliferation resistance. The glass canister would then be disposed of by geological emplacement. This paper discusses how glass meets two criteria: the condition of significant actinide volubility, and That the PuO{sub 2} feed should be incorporated into the matrix without significant amount of unreacted material.

One waste sample was analyzed (with duplicate, matrix spike, and matrix spike duplicate) for PCBs as Aroclor mixtures by the Inorganic/Organic Chemistry Group. A soxhlet extraction procedure was used for extraction of the Aroclors from the sample. Analysis was performed using dual column confirmation gas chromatography/electron capture detection (GC/ECD). Extraction follows closely method 354 C of SW-846, analysis follows SW-846 method 8082. A cross reference of laboratory sample number to the customer identification is given in a table.