This report discusses the following topics: Yaug collider detector program; E-791: continued study of heavy flavors at TPL; Hadroproduction of charm and beauty; Search for composite objects produced in relativistic heavy ion collisions; and high energy physics computer facility.

The presence of potassium or calcium in sol gel catalysts increase the production of C{sub 4} hydrocarbon and that of methane while maintaining high activities. Characterization of catalysts using temperature programmed desorption of carbon dioxide indicates that activity and product distribution over an isosynthesis catalyst depend on its acid-base properties. Low activity was observed for catalysts with very weak basicity, and high oxygenate production for catalysts with strong basicity. An optimum strength of basic sites is crucial to achieve high activity while minimizing the amount of oxygenates. A kinetic model was developed based on the reaction mechanisms, and the simulation from the model produces reasonable fit with the experimental data.

This report explains the method chosen to phase match cables, it`s accuracy and the effects of mismatched cables on the position output of the Linac Beam Position Module.

Self-lubricating composites consist of at least one structural (matrix) phase and at least one phase to provide lubrication. Modeling the behavior of such composites involves ascertaining the frictional contributions of each constituent phase under varying conditions of lubricating films coverage. The ORNL friction microprobe (FMP), a specialized microcontact tribometer, was used to investigate the frictional behavior of both matrix and lubricant phases to support the development of self-lubricating, surfaces. Polished CVD-silicon carbide deposits and silicon wafers were used as substrates. The wafers were intended to simulate the thin silica films present on SiC surfaces at elevated temperature. Molybdenum disulfide, in both sputtered and burnished forms, was used as the model lubricant. The effects of CVD-SiC substrate surface roughness and method of lubricant film deposition on the substrate were studied for single passes of a spherical silicon nitride slider (NBD 200 material). In contrast to the smooth sliding exhibit by burnished, films, sputtered MoS{sub 2} surfaces exhibited marked stick-slip behavior, indicating that the frictional behavior of solid lubricating coatings can be quite erratic on a microscale, especially when asperity contacts are elastically compliant.

Relatively simple models are presented to simulate close-in atmospheric dispersion, explosive releases, and particle deposition. Close-in generally refers to distances less than 50 m downwind from the source. These models assume simple gas dispersion (no chemical reactions, neutral buoyancy) and that particles behave as a gas expect they can be removed from the plume by a simple, deposition-velocity mechanism. These models have been combined into a QuickBASIC program (INEXPLC.BAS) and its PC executable form (INEXPLC.EXE). These programs, along with sample input and output files, are available from the author.

Elegant stands for ``Electron Generation and Tracking,`` a somewhat out-of-date description of a fully 6D accelerator program that now does much more than generate particle distributions and track them elegant, written entirely in the C programming language, uses a variant of the MAD input format to describe accelerators, which may be either transport lines, circular machines, or a combination thereof. Program execution is driven by commands in a namelist format. This document describes the features available in elegant, listing the commands and their arguments. The differences between elegant and MAD formats for describing accelerators are listed. A series of examples of elegant input and output are given. Finally, appendices are included describing the post-processing programs.

This paper examines the factors that threaten the future of the Russian Federation (RF). The observations are based on a study that focused on eight republics: Mordova, Udmurtia, Tatarstan, Mari El, Bashkortostan, Kabardino-Balkaria, Buryatia, and Altay Republic. These republics were selected for their geographic and economic significance to the RF. Tatarstan, Bashkortostan, Udmurtia, and Mari El are located on important supply routes, such as the Volga River and the trans-Siberian railroad. Some of these republics are relatively wealthy, with natural resources such as oil (e.g., Tatarstan and Bashkortostan), and all eight republics play significant roles in the military-industrial complex. The importance of these republics to the RF contrasts to the relative insignificance of the independence-minded Northern Caucasus area. The author chose not to examine the Northern Caucasus region (except Kabardino-Balkaria) because these republics may have only a minor impact on the rest of the RF if they secede. Their impact would be minimized because they lie on the frontiers of the RF. Many Russians believe that {open_quotes}it might be best to let such a troublesome area secede.{close_quotes}

The Tokamak Physics Experiment (TPX) will have a poloidal field system capable of full inductive operation poloidal for approximately a 20-s flattop and, with superconducting toroidal and poloidal field coils and non-inductive current drive, it will be capable of true steady-state operation. The poloidal field design is based on the ideal MHD equilibrium model as implemented in the TEQ code developed at LLNL. The PF coils are arranged in an up-down symmetric configuration, external to the TF coils. The TPX diverted plasma will have an aspect ratio of 4.5 and is highly shaped with a nominal elongation of 2 and triangularity of approximately 0.8 as measured at the separatrix. The tokamak design is based on a high-current (q{sub {psi}}=3) plasma scenario and a low current scenario. Each scenario has an operational flexibility requirement which is defined as a region of plasma pressure and inductivity ({beta}{sub N} {minus} l{sub i}) space, where the plasma shape is constrained to keep the divertor configuration operational. Single-null plasma configurations are feasible, even with the same divertor hardware, by operating the PF coils asymmetrically. Recently applied optimization techniques have improved the capability of the PF system without additional cost.

The design of the Local Instrumentation & Control (I&C) System for the Tokamak Physics Experiment (TPX) superconducting PF & TF magnets is presented. The local I&C system monitors the status of the magnet systems and initiates the proper control sequences to protect the magnets from any foreseeable fault. Local I&C also stores magnet-system data for analysis and archiving. Quench Detection for the TPX magnets must use a minimum of two independent sensing methods and is allowed a detection time of one second. Proposed detection methods include the measurement of; (1) normal-zone resistive voltage, (2) cooling-path helium flow, (3) local temperature in the winding pack, (4) local pressure in the winding pack. Fiber-optic based isolation systems are used to remove high common-mode magnet voltages and eliminate ground loops. The data acquisition and fault-detection systems are computer based. The design of the local I&C system incorporates redundant, fault-tolerant, and/or fail-safe features at all component levels. As part of a quench detection R&D plan, a Quench Detection Model Coil has been proposed to test all detection methods. Initial cost estimates and schedule for the local I&C system are presented.

The authors describe the detailed protocol developed in their laboratory at Oak Ridge for the permeabilization and cryobiological preservation of embryos of Drosophila melanogaster, Oregon R strain. The protocol is supplemented by notes containing two sorts of information. One category includes references to the appropriate portions of their published papers giving the scientific rationale and experimental basis for important steps. The other category is concerned with the criticality of certain steps and the precision with which they need to be performed. As an aid to investigators, the authors list even ordinary pieces of equipment. Brand names and model numbers are given where it is either important or convenient for readers to know precisely what is used.

President Clinton proposed to Prime Minister Miyazawa the idea of a framework for U.S.-Japanese negotiations during their April 13, 1993 meeting in Washington. The two leaders agreed to instruct subordinates to prepare details of such a framework in time for presentation in July in Tokyo when the President would meet with the Prime Minister and the other G-7 leaders at the annual economic summit.

Volume Visualization is becoming an important tool for understanding large 3D datasets. A popular technique for volume rendering is known as splatting. With new hardware architectures offering substantial improvements in the performance of rendering texture mapped objects, we present textured splats. An ideal reconstruction function for 3D signals is developed which can be used as a texture map for a splat. Extensions to the basic splatting technique are then developed to additionally represent vector fields.

Models that address the impacts to forests of climate change are reviewed by four levels of biological organization: global, regional or landscape, community, and tree. The models are compared as to their ability to assess changes in greenhouse gas flux, land use, maps of forest type or species composition, forest resource productivity, forest health, biodiversity, and wildlife habitat. No one model can address all of these impacts, but landscape transition models and regional vegetation and land-use models consider the largest number of impacts. Developing landscape vegetation dynamics models of functional groups is suggested as a means to integrate the theory of both landscape ecology and individual tree responses to climate change. Risk assessment methodologies can be adapted to deal with the impacts of climate change at various spatial and temporal scales. Four areas of research development are identified: (1) linking socioeconomic and ecologic models, (2) interfacing forest models at different scales, (3) obtaining data on susceptibility of trees and forest to changes in climate and disturbance regimes, and (4) relating information from different scales.

The MTX explored the plasma heating effects of 140 GHz microwaves from both Gyrotrons and from the IMP FEL wiggler. The Gyrotron was long pulse length (0.5 seconds maximum) and the FEL produced short-pulse length, high-peak power, single and burst modes of 140 GHZ microwaves. Full-power operations of the IMP FEL wiggler were commenced in April of 1992 and continued into October of 1992. The Experimental Test Accelerator H (ETA-II) provided a 50-nanosecond, 6-MeV, 2--3 kAmp electron beam that was introduced co-linear into the IMP FEL with a 140 GHz Gyrotron master oscillator (MO). The FEL was able to amplify the MO signal from approximately 7 kW to peaks consistently in the range of 1--2 GW. This microwave pulse was transmitted into the MTX and allowed the exploration of the linear and non-linear effects of short pulse, intense power in the MTX plasma. Single pulses were used to explore and gain operating experience in the parameter space of the IMP FEL, and finally evaluate transmission and absorption in the MTX. Single-pulse operations were repeatable. After the MTX was shut down burst-mode operations were successful at 2 kHz. This paper will describe the IMP FEL, Microwave Transmission System to MTX, the …

Measurements of the transverse dependence of the flux on the symmetry plane were obtained on a series of endpacks mounted on a Main Injector prototype dipole. From these flux measurements, we determined the endfield shape, expressed in terms of normal harmonics, up to 14-pole. We describe the measurement and analysis procedure, and present the results for all endpacks that were tested. The final endpack (number 10) has a sextupole, normalized to the body, of +0.167 [plus minus] .072 units, and the relative field shape deviates by [lt] 1.2 units relative to the on-axis field strength over the range [vert bar]x[vert bar] [lt] 2.0[double prime]. These measurements indicate that Endpack 10 meets the requirements for the Main Injector dipole.

Measurements of the transverse dependence of the flux on the symmetry plane were obtained on a series of endpacks mounted on a Main Injector prototype dipole. From these flux measurements, we determined the endfield shape, expressed in terms of normal harmonics, up to 14-pole. We describe the measurement and analysis procedure, and present the results for all endpacks that were tested. The final endpack (number 10) has a sextupole, normalized to the body, of +0.167 {plus_minus} .072 units, and the relative field shape deviates by {lt} 1.2 units relative to the on-axis field strength over the range {vert_bar}x{vert_bar} {lt} 2.0{double_prime}. These measurements indicate that Endpack 10 meets the requirements for the Main Injector dipole.

The objective of this study is to determine, through the collection of grab sampling data, that an in-depth resuspension study should or should not be performed. Currently there is not enough data available to determine if a potential health hazard exists due to resuspended contamination in the tank farms. A detailed resuspension study is currently not justified, because the limited quantity of air sample data collected does not indicate the existence of a potential health hazard.

Optical communication is likely to significantly speed up parallel computation because the vast bandwidth of the optical medium can be divided to produce communication networks of very high degree. However, the problem of contention in high-degree networks makes the routing problem in these networks theoretically (and practically) difficult. In this paper we examine Valiant`s h-relation routing problem, which is a fundamental problem in the theory of parallel computing. The h-relation routing problem arises both in the direct implementation of specific parallel algorithms on distributed-memory machines and in the general simulation of shared memory models such as the PRAM on distributed-memory machines. In an h-relation routing problem each processor has up to h messages that it wishes to send to other processors and each processor is the destination of at most h messages. We present a lower bound for routing an h-relation (for any h > 1) on a complete optical network of size -n. Our lower bound applies to any randomized distributed algorithm for this task. Specifically, we show that the expected number of communication steps required to route an arbitrary h-relation is {Omega}(h + {radical}log log n). This is the first known lower bound for this problem which does …

A plasma thruster operating at high specific impulse ({ge} 3500 s) has been proposed to be based on electron-cyclotron resonance heating of whistler waves propagating on a plasma column on a magnetic hill. Calculations using a particle-in-cell code demonstrate that the distortion of the electron velocity distribution by the heating significantly reduces the flow of plasma up the field, greatly improving efficiency and reducing material interactions relative to a thermal plasma. These and other calculations are presented together with initial experiments on the plasma generated in the proposed device. The experiments are conducted in a magnetic field (3.3 {times} 10{sup {minus}2} T at resonance) and a magnetic mirror ratio of 5. Microwaves (0.915 GHz, <20 kW) are coupled to the plasma with a helical antenna. Vacuum field measurements are in good agreement with prediction. The desired plasma spatial distribution has not yet been achieved.

We report on an existing program of research on the production and decay of particles containing the charm and beauty quarks. Charm is studied in Fermilab fixed target experiments E769 and E691. Design and development for a hadron collider beauty experiment is studied in CERN test experiment P238 and in simulation studies for the SSC.

Water and acid absorption tests of samples of a proposed replacement to current polyethylene foam used as fill material on the FB-Line cation columns have been completed. Water and nitric acid solution absorption of up to 4 volume percent was observed over approximately a 4 month period of time. Because of the nuclear safety implications, liquid absorption of a replacement fill material must be low. EthafoaM{trademark} 220 extruded polyethylene, a product available from Dow Chemical Company appears to be a good candidate material for replacement of the existing fill material. Establishment of 5 volume percent solution absorption specification appears to be both reasonable and achievable for a replacement foam, provided it is acceptable to nuclear safety personnel.

Water and acid absorption tests of samples of a proposed replacement to current polyethylene foam used as fill material on the FB-Line cation columns have been completed. Water and nitric acid solution absorption of up to 4 volume percent was observed over approximately a 4 month period of time. Because of the nuclear safety implications, liquid absorption of a replacement fill material must be low. EthafoaM[trademark] 220 extruded polyethylene, a product available from Dow Chemical Company appears to be a good candidate material for replacement of the existing fill material. Establishment of 5 volume percent solution absorption specification appears to be both reasonable and achievable for a replacement foam, provided it is acceptable to nuclear safety personnel.

Current sharing phenomena were studied during the testing of ITER (International Thermonuclear Experimental Reactor) prototype sample conductors in the FENIX (Fusion Engineering International Experiments) test facility at the Lawrence Livermore National Laboratory. During steady-state operation in the current sharing region, voltage drops of up to 200 {mu}V were measured across the conductor. These experimental results were studied in detail using computer program CICC. Differences between the computer predictions and experimental results are postulated to be due to inter-strand cross-currents.

Samples were collected during the A/M Area Crouch Branch (Cretaceous) Aquifer Characterization (Phase I) Program. The samples were analyzed for chlorinated VOCs by the Savannah River Technology Center (SRTC) and MicroSeeps Ltd. All samples were sealed in the field immediately upon retrieval of the core and subsampling. A total of 113 samples locations were selected for analysis. The Environmental Sciences Section (ESS) of SRTC analyzed all locations in duplicate (226 samples). MicroSeeps Ltd was selected as the quality assurance (QA) check laboratory. MicroSeeps Ltd analyzed 40 locations with 4 duplicates (44 samples). The samples were collected from seven boreholes in A/M Area in the interval from 200 feet deep to the total depth of the boring (360 feet deep nominal); samples were collected every 10 feet within this interval. The sampling zone corresponds approximately to the Crouch Branch Aquifer in A/M Area. The overall A/M Area Crouch Branch Aquifer characterization objectives, a brief description of A/M Area geology and hydrology, and the sample locations, field notes, driller lithologic logs, and required procedural documentation are presented in WSRC (1993).