In both Japan and in the United States, industrial associations play an important role in enhancing government understanding and interaction with industries and in easing cooperative efforts among firms. This report examines the role of industrial associations and related organizations in high-technology policymaking and in accelerating technological development.

Trade relations between the United States and Japan in the 1980s were marked by U.S. efforts to pressure Japan to absorb increasingly greater amounts of U.S. exports. The United States sought to improve its steadily worsening bilateral trade deficit with Japan by negotiating to lower barriers to U.S. exports through the General Agreement on Tariffs and Trade, the Market Oriented, Sector Selective Talks, the Super 301 process, the Structural Impediments Initiative, and other bilateral fora. The United States succeeded in having Japan take some market-opening measures, and despite fluctuations, U.S. exports to Japan of most of the products which were the subject of negotiations by the two countries between 1985 and 1990 have increased.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarificationl; Whether section 102.51 of the Alcoholic Beverage Code imposes a territorial limitation on the resale of beer by persons who purchase from general distributions (RQ-2151)

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification; Termination of a depositer's interest in a joint account by deletion of the depositer's name at the direction of another joint owner (RQ-2190)

Cementitious materials, together with other materials, are being considered to seal a potential repository at Yucca Mountain. A concern with cementitious materials is the chemical and mineralogic changes that may occur as these materials age while in contact with local ground waters. A combined theoretical and experimental approach was taken to determine the ability to theoretically predict mineralogic changes. The cementitious material selected for study has a relatively low Ca:Si ratio approaching that of the mineral tobermorite. Samples were treated hydrothermally at 200{degrees}C with water similar to that obtained from the J-13 well on the Nevada Test Site. Post-test solutions were analyzed for pH as well as dissolved K, Na, Ca, Al, and Si. Solid phases formed during these experiments were characterized by scanning electron microscopy and X- ray diffraction. These findings were compared with predictions made by the geochemical modeling code EQ3NR/E06. It was generally found that there was good agreement between predicted and experimental results.

In September of 1987, the principals of what is now Hi-Z TECHNOLOGY, INC. applied to the National Bureau of Standards (now National Institute of Standards and Technology, NIST) under the Energy Related Inventions Program. The invention was entitled ``Thermoelectric Generator for Diesel Engines.`` The National Institute of Standards and Technology evaluated the invention and on January 12, 1989 forwarded Recommendation Number 455 to the Department of Energy (DOE). This recommendation informed the DOE that the invention had been selected for recommendation by the NIST for possible funding by the DOE. Following the recommendation of the NIST, the DOE contacted Hi-Z to work out a development program for the generator. A contract for a grant to design, fabricate, and test a Proof-of-Principle exhaust powered thermoelectric generator for Diesel engines was signed October 19, 1989. Hi-Z provided the thermoelectric modules used in the generator as their contribution to the project. The purpose of this Grant Program was to design, build, and test a small-scale, Proof-of-Principle thermoelectric generator for a Diesel engine. 15 figs., 1 tab.

The design of the EC carriage is based on the design of the CC carriage documented in D-0 Engineering Note 3740.215-EN-14. The non-symmetric weight distribution of the EC cryostat results in uneven loading of the arms of the EC carriage. The design load on each rear arm is 220,000 lb, while each front arm supports 40,000 lb. (The CC carriage design load was 200,000 lb on all four arms.) ANSYS finite element models were made representing various combinations of plate thicknesses in an attempt to balance the deflections of the arms. In the final design a 3/4-inch curved top plate is used with an additional 1.75-inch thick 'doubler plate' incorporated into the rear arms. The bottom flanges are 2-inch and 3/4-inch for the rear and front arms, respectively. Web plates are 3/4-inch for all arms. The carriage bottom plate is 2-inch thick, and other details are similar to the CC design.

Ongoing studies by the National Aeronautics and Space Administration (NASA) for the robotic exploration of Mars contemplate a network of at least twenty small and relatively inexpensive landers distributed over both low and high latitudes of the Martian globe. They are intended to explore the structural, mineralogical, and chemical characteristics of the Martian soil, search for possible subsurface trapped ice, and collect long-term seismological and meteorological data over a period of ten years. They can also serve as precursors for later unmanned and manned Mars missions.; The collected data will be transmitted periodically, either directly to Earth or indirectly via an orbiting relay. The choice of transmission will determine the required power, which is currently expected to be between 2 and 12 watts(e) per lander. This could be supplied either by solar arrays or by Radioisotope Thermoelectric Generators (RTGs). Solar-powered landers could only be used for low Martian latitudes, but RTG-powered landers can be used for both low and high latitudes. Moreover, RTGs are less affected by Martian sandstorms and can be modified to resist high-G-load impacts. High impact resistance is a critical goal. It is desired by the mission designers, to minimize the mass and complexity of the system …

Pressure vessels must be protected against overpressure scenarios. A scenario of particular concern is that from a high pressure LN2 pump, now standard on LN2 delivery trailers. A safety mechanism must be in place to prevent the overfilling, and subsequent overpressure from occurring because these pumps have a higher mass flow output than reasonably sized relief valves provide. The original solution to the problem was to close a valve on the fill line when a certain liquid level in the dewar is reached. The valve remains closed until the level drops below that threshold. The trigger level was about 13,000 gallons for the 20,000 gallon capacity dewar. The solution was in place from 1989 until present, 2004.

During the accelerator studies period of 12/90-1/91 much study time was dedicated to improving the E760 deceleration ramps. 4 general goals were in mind: (1) Reduce the relative orbit deviations from the nominal reference orbit as much as possible. This reduces the potential error in the orbit length calculation - which is the primary source of error in the beam energy calculation. (2) Maximize the transverse apertures. This minimizes beam loss during deceleration and during accidental beam blow-ups. (3) Measure and correct lattice parameters. Knowledge of {gamma}{sub T}, {eta}, Q{sub h}, Q{sub v}, and the dispersion in the straight sections allows for a more accurate energy calculation and reliable SYNCH calculations. (4) Minimize the coupling. This allows one to discern between horizontal and vertical tunes.

When 001 plates of KD{sub 2}PO{sub 4} (KD*P) are used in Pockels cells, strain induced refractive index variations result in beam depolarization and transmitted wavefront distortion. The depolarization is determined by the induced birefringence while the wavefront distortion is controlled by the average index shift. Here we show that the birefringence is determined by the shear stress in the xy-plane of the crystal while the average index shift depends only on the normal stresses. Furthermore, for depolarization losses of 0.1 to 1.0% and wavefront distortion of 0.1 to 1.0{lambda}, the critical range of stress is 10{sup 5} to 10{sup 6} Pa. We also present measured depolarization loss and wavefront distortion profiles for 5, 16 and 27cm, 95% deuterated, KD*P crystals. Using the analysis described above we show that the maximum internal stresses in the crystals are within the critical range, but that the area averaged stresses are substantially lower. We find that crystals from different locations along the length of a boule have similar strain birefringence and wavefront distortion profiles indicating that the growth conditions which generate the internal strain persist throughout much of the growth history of the boule. Finally, we discuss potential sources of strain in KD*P. 8 …

The lowest mesons made up of a light quark and a strange quark produced from a K beam show a good agreement with expectations of the quark model. This good agreement leads to the prediction of the light isoscalar and isovector states and the isoscalar s{bar s} states. Except for one mystery The X(1590) the 2{sup ++} states seems to be well described by the expected ideally mixed q{bar q} states up to 2. 0 GeV. Above 2.0 GeV a new degree of freedom seems to be excited with respect to the breakdown of the OZI rule in production of 2{sup ++} resonances that decay into {phi}{phi}. This is to be contrasted with the situation for the O{sup ++} isoscalar states which seems to show a new degree of freedom for its mesons in its ground state. One might conclude that since the O{sup ++} glueball is predicted by lattice calculations to be degenerate with the s{bar s} O{sup ++} meson, that the very unusual assortment of isoscalar O{sup ++} mesons are due to glueball mixing.

The purpose of this audit was to determine whether the Department of Energy's (Department) management of its contract with Ross Aviation, Inc. (Ross) provided reasonable assurance that the inventory of aircraft major spare parts at Ross was economical and efficient. The audit disclosed that approximately $447,000 (acquisition and interest carrying costs) of low-use major spare parts was excessive. Internal control deficiencies which fostered the excessive inventory included: (1) Ross had set stock levels without considering such factors as consumption or projected needs; and (2) the Department had not reviewed inventory quantities when appraising Ross' property management. The Albuquerque Operations Office (AL) agreed to take the corrective actions recommended in the report.

This memorandum discusses five key issues that initial interviews have brought into focus: The preoccupation of the public with nuclear waste disposal, the credibility of public opinion polls addressing nuclear power, the unlikelihood of dramatic change in opinion by nuclear critics, difficulties in communicating technical concepts, and the problem of focussing narrowly or broadly on policy issues.

In August of 1990 the Savannah River Site Photography Group began testing on a different type of silver recovery system. This paper describes the baseline study and the different phases of installation and testing of the system.

Sandia National Laboratories has completed a requirements study for a networked mass storage system. The areas of user functionality, network connectivity, and performance were analyzed to determine specifications for a Network Storage Service to operate in supercomputer environment. 4 refs.

This publication presents current data on production, consumption, stocks, imports, exports, and prices of the principal energy commodities in the United States. Also included are data on international production of crude oil, consumption of petroleum products, petroleum stocks, and production of electricity from nuclear-powered facilities. 36 figs., 57 tabs.

A continuous wave doppler radar system has been designed which is portable, easily deployable and can be remotely controlled. The system is immune to ground clutter and is used for wind speed detection and direction determination. Nearly real time digital signal processing is performed by an Analog Devices ADSP-21020, a 40-bit floating point Digital Signal Processing (DSP) microprocessor. This paper provides an overview of the design of the system including the radio frequency (RF) to digital interface. The various DSP detection algorithms are discussed and compared to system performance and sensitivity. Finally, DSP performance is compared to the performance of an earlier system using Analog Device's ADSP-2100. 6 refs.

As scintillating plate calorimetry is a viable option for the SDC detector, it is imperative that the phase space of passive and active materials be explored in a systematic fashion. To this end, we have examined several different configurations of passive and active materials as a function of incident energy, to see what the resolution and e/h characteristics are of each of these configurations. These studies have been carried out using the CALOR89 Monte Carlo simulation package. 3 figs., 5 tabs.