The Retrieval Process Development and Enhancements (RPD and E) activities are part of the US Department of Energy (DOE) EM-50 Tanks Focus Area, Retrieval and Closure program. The purpose of RPD and E is to understand retrieval processes, including emerging and existing technologies, and to gather data on these processes, so that end users have requisite technical bases to make retrieval decisions. Technologies addressed during FY97 include enhancements to sluicing, the use of pulsed air to assist mixing, mixer pumps, innovative mixing techniques, confined sluicing retrieval end effectors, borehole mining, light weight scarification, and testing of Russian-developed retrieval equipment. Furthermore, the Retrieval Analysis Tool was initiated to link retrieval processes with tank waste farms and tank geometric to assist end users by providing a consolidation of data and technical information that can be easily assessed. The main technical accomplishments are summarized under the following headings: Oak Ridge site-gunite and associated tanks treatability study; pulsed air mixing; Oak Ridge site-Old Hydrofracture Facility; hydraulic testbed relocation; cooling coil cleaning end effector; light weight scarifier; innovative tank mixing; advanced design mixer pump; enhanced sluicing; Russian retrieval equipment testing; retrieval data analysis and correlation; simulant development; and retrieval analysis tool (RAT).

The UCSD/TEXTOR collaboration has achieved the completion of three major tasks this year: (1) pump limiter studies; (2) RI-mode turbulence studies; and (3) velocity shear stabilization of turbulence. Brief summaries of progress in each area are given.

The legacy of nearly five of rapid industrialization throughout the Southwest includes sites where volatile contaminants have been accidentally or intentionally released at or immediately below the surface. Understanding the mechanism and rate of volatile transport trough the vadose zone is important to assessing the potential impact on groundwater resources. This is particularly significant in and environments where the inseminated (vadose) zone above the water table may be more than 300 m thick. While numerical models have been developed to predict the movement of volatiles trough the unsaturated zone, there are only limited opportunities to verify predictions against field data. Field measurements of vadose zone transport are important in terms of constraining model parameters and can be applied to a variety of contaminant issues. This includes the ability to monitor and detect deep underground explosions in violation of nuclear test ban treaties. We have investigated the movement of vadose zone gases in a deep alluvial basin at the Nevada Test Site. The opportunity to study the migration of soil gases in this setting is unique due to the access afforded by the Joint Test Organization`s U-la tunnel complex, mined at a depth of approximately 300 m below ground surface in …

The purpose of the piezometer network is to establish baseline hydraulic head data for the water table aquifer at the F- and H-Area seeplines prior to startup of the groundwater extraction/injection remediation system.

Sandia National Laboratories, New Mexico, conducts the Energy Storage Systems Program, which is sponsored by the US Department of Energy`s Office of Utility Technologies. The goal of this program is to collaborate with industry in developing cost-effective electric energy storage systems for many high-value stationary applications. Sandia National Laboratories is responsible for the engineering analyses, contracted development, and testing of energy storage components and systems. This report details the technical achievements realized during fiscal year 1997. 46 figs., 20 tabs.

Lawrence Berkeley National Laboratory was awarded eight Environmental Management Science Program (EMSP) research grants in Fiscal Year 1996. This report summarizes the progress of each grant in addressing significant DOE site cleanup issues after completion of the first year of research. The technical progress made to date in each of the research projects is described in greater detail in individual progress reports. The focus of the research projects covers a diversity of areas relevant to site cleanup, including bioremediation, health effects, characterization, and mixed waste. Some of the projects cut across a number of focus areas. Three of the projects are directed toward characterization and monitoring at the Idaho National Engineering and Environmental Laboratory, as a test case for application to other sites.

To model tank waste aging and interpret tank waste speciation results, the authors began measuring the reactivity of organic complexants and related compounds towards radiation-induced oxidation reactions. Because of the high efficiency of scavenging of the primary radicals of water radiolysis by nitrate and nitrite ion, the major radiolytically-generated radicals in these solutions, and in Hanford tank wastes, are NO{sub 2}, NO and O{sup {minus}}. Prior to this effort, little quantitative information existed for the reactions of these radicals with organic compounds such as those that were used in Hanford processes. Therefore, modeling of actual waste aging, or even simulated waste aging, was not feasible without measuring reactivities and determining reaction paths. The authors have made the first rate measurements of complexant aging and determined some of their degradation products.

The focus of this work is the production of 2-mm P{alpha}MS mandrels by microencapsulation for use as National Ignition Facility (NIF) laser targets. It is our findings thus far that the processing techniques used previously for the 0.5-mm and 1.0-mm targets are no longer useful for preparation of the larger targets for a few fundamental reasons. The driving force for sphericity (from the minimization of interracial energy) decreases as the radius of curvature increases. Simultaneously, the mechanical robustness /stability of the water-oil-water emulsion droplets decreases as the droplet size increases. The impact of these physical conditions and the possibilities of circumventing these limitations have been examined while attempting to meet the NIF shell power spectrum criteria. Identifying the key parameters in the transition (solidification) from a w-o-w droplet to a solid polymer shell has been understood implicitly to be the paramount goal. It is believed through the knowledge gained that it will be possible to minimize the deleterious forces and maximize shell sphericity. At this point it is believed that properties intrinsic to the polymer (i.e., P{alpha}MS) such as its solution behavior and evolution of film stresses control the overall shell sphericity.

This report summarizes the results from the 1997 irradiation of the corrosion insert at the LANSCE A6 Target Station. It addresses the corrosion measurements made on the in-beam Inconel 718 probe only. To simulate the environment that materials may be exposed to in a spallation neutron target/blanket cooling loops, samples were irradiated by the proton beam at the A6 Target Station of the Los Alamos Neutron Scattering Center (LANSCE). EIS measurements have demonstrated that the polarization resistance of IN718 decreases from approximately 3 x 10{sup 5} ohms prior to irradiation to approximately 1,000 ohms during irradiation at a proton beam current of 400 {micro}A. From the polarization resistance measurements, corrosion rate as a function of beam current was calculated for several different scenarios of beam/sample interaction. As the beam spot was small relative to the size of the IN718 corrosion probe (2{sigma} = 3 cm vs. 1.3 cm diam. x 15.9 cm length respectively), The first method for calculating corrosion rate used beam profile as a criterion for the area of highest damage. The beam spot intensity profile at LANSCE has been characterized and found to be a Gaussian distribution rotated about a central axis. From this relationship, and R{sub …

Experimental cryogenic capabilities are essential for the study of ICF high-gain target and weapons effects issues involving dynamic materials response at low temperatures. This report describes progress during the period 2/97-11/97 on the FY97 LDRD project ``Cryogenic EOS Capabilities on Pulsed Radiation Sources (Z Pinch)``. The goal of this project is the development of a general purpose cryogenic target system for precision EOS and shock physics measurements at liquid helium temperatures on the Z accelerator Z-pinch pulsed radiation source. Activity during the FY97 LDRD phase of this project has focused on development of a conceptual design for the cryogenic target system based on consideration of physics, operational, and safety issues, design and fabrication of principal system components, construction and instrumentation of a cryogenic test facility for off-line thermal and optical testing at liquid helium temperatures, initial thermal testing of a cryogenic target assembly, and the design of a cryogenic system interface to the Z pulsed radiation source facility. The authors discuss these accomplishments as well as elements of the project that require further work.

This annual report is one volume of the Enhanced Surveillance Program (ESP) FY97 Accomplishments. The complete accomplishments report consists of 11 volumes. Volume 1 includes an ESP overview and a summary of selected unclassified FY97 program highlights. Volume 1 specifically targets a general audience, reflecting about half of the tasks conducted in FY97 and emphasizing key program accomplishments and contributions. The remaining volumes of the accomplishments report are classified, organized by program focus area, and present in technical detail the progress achieved in each of the 104 FY97 program tasks. Focus areas are as follows: pits; high explosives; organics; dynamics; diagnostics; systems; secondaries; nonnuclear materials; nonnuclear components; and Surveillance Test Program upgrades.

Thermal sprayed ethylene methacrylic acid (EMAA) and ethylene tetrafluoroethylene (ETFE), spray-and-bake ETFE and polyvinylidene fluoride (PVDF) and brushable ceramic-epoxy coatings were evaluated for corrosion protection in a biochemical process to treat geothermal residues. The findings are also relevant to other moderate temperature brine environments where corrosion is a problem. Coupon, Atlas cell, peel strength, cathodic disbondment and abrasion tests were performed in aggressive environments including geothermal sludge, hypersaline brine and sulfur-oxidizing bacteria (Thiobadus ferrooxidans) to determine suitability for protecting storage tanks and reaction vessels. It was found that all of the coatings were resistant to chemical attack and biodegradation at the test temperature of 55 C. The EMAA coatings protected 316L stainless steel from corrosion in coupon tests. However, corrosion of mild steel substrates thermal sprayed with EMAA and ETFE occurred in Atlas cell tests that simulated a lined reactor operating environment and this resulted in decreased adhesive strength. Peel tests to measure residual adhesion revealed that failure mode was dependent on exposure conditions. Long-term tests on the durability of ceramic-epoxy coatings in brine and bacteria are ongoing. Initial indications are that this coating has suitable characteristics. Abrasion tests showed that the ceramic-epoxy had good resistance to the abrasive effects …

This report summarizes the activities conducted by the Active Sites Environmental Monitoring Program (ASEMP) from October 1996 through September 1997. The purpose of the program is to provide early detection and performance monitoring at active low-level waste (LLW) disposal sites in Solid Waste Storage Area (SWSA) 6 and transuranic (TRU) waste storage sites in SWSA 5 North. This report continues a series of annual and semiannual reports that present the results of ASEMP monitoring activities. This report details monitoring results for fiscal year (FY) 1997 from SWSA 6, including the Interim Waste Management Facility (IWMF) and the Hillcut Disposal Test Facility (HDTF), and (2) TRU-waste storage areas in SWSA 5 N. This report presents a summary of the methodology used to gather data for each major area along with the FY 1997 results. Figures referenced in the text are found in Appendix A and data tables are presented in Appendix B.

The Government Management Reform Act and the Government Performance and Results Act both have the objective of ensuring that Federal government agencies are accountable to American taxpayers. This report provides a clear accounting of the return on the investment entrusted to the Department of Energy. Unlike previous annual reports prepared by the Department, this report is fashioned along the lines of a corporate report to the shareholders. Not only does this report contain audited financial statements for the fiscal year but it also describes what the shareholders, American taxpayers, received in the way of services and contributions to the important National goals this Administration and the Department have promised to provide. This report provides a progress report on how the Department is serving the country and how they are doing it for much lower cost.

This report present the results of FY 1997 technical studies conducted by the Lawrence Livermore National Laboratory (LLNL) as part of the Hydrology and Radionuclide Migration Program (HRMP) and Underground Test Area Operable Unit (UGTA). The HRMP is sponsored by the US Department of Energy to assess the environmental (radiochemical and hydrologic) consequences of underground nuclear weapons testing at the Nevada Test Site.

The general purpose of the Grout Development Program is to solidify and stabilize the liquid low-activity wastes (LAW) generated at the Idaho Chemical Processing Plant (ICPP). It is anticipated that LAW will be produced from the following: (1) chemical separation of the tank farm high-activity sodium-bearing waste, (2) retrieval, dissolution, and chemical separation of the aluminum, zirconium, and sodium calcines, (3) facility decontamination processes, and (4) process equipment waste. Grout formulation studies for sodium-bearing LAW, including decontamination and process equipment waste, continued this fiscal year. A second task was to develop a grout formulation to solidify potential process residual heels in the tank farm vessels when the vessels are closed.

The activities and tasks needed to successfully prepare an interim, preliminary, and final performance assessment on the disposal of the low-level fraction of Hanford tank wastes are given. Included are analytic, experimental, computational, writing, and approval tasks. These statements of work will be revised annually.

Previously, the proposers have delivered to ARM a documented algorithm, that is now applied operationally, and which derives water vapor profiles from combined remote sensor measurements of water vapor radiometers, cloud-base ceilometers, and radio acoustic sounding systems (RASS). With the expanded deployment of a Raman lidar at the CART Central Facility, high quality, high vertical-resolution, water vapor profiles will be provided during nighttime clear conditions, and during clear daytime conditions, to somewhat lower altitudes. The object of this proposal was to use Kalman Filtering, previously applied to the combination of nighttime Raman lidar and microwave radiometer data, to derive high-quality water vapor profiles, during non-precipitating conditions, from data routinely available at the CART site. Input data to the algorithm would include: Raman lidar data, highly quality-controlled data of integrated moisture from microwave radiometers and GPS, RASS, and radiosondes. The algorithm will include recently-developed quality control procedures for radiometers. The focus of this years activities has been on the intercomparison of data obtained during an intensive operating period at the SGP CART site in central Oklahoma.

This report presents the details of the mission and strategic plan for Lawrence Berkeley Laboratory during the fiscal years of 1995--2000. It presents summaries of current programs and potential changes; critical success factors such as human resources; management practices; budgetary allowances; and technical and administrative initiatives.

Agency strategic plan for the Texas Natural Resource Commission describing the organization's planned services, activities, and other goals during fiscal years 1997 through 2001.

Annual report of statewide consolidated travel data describing goals, activities, and accomplishments during fiscal year 1997.

Annual financial report of the Teacher Retirement System of Texas documenting income, expenditures, and other relevant financial information for fiscal year 1997. Also includes descriptions of different departments in the Teacher Retirement System of Texas.

Annual report of the Texas Judicial System (the Texas Judicial Council and the Office of Court Administration) describing judicial branch operations, reports and developments, and summaries and analyses of court activities for the 1997 fiscal year.

Annual report of the Texas Savings and Loan Department documenting savings and loan associations in the state through a series of tables documenting overall statistics, various financial statements, and breakdowns by size and location.