An economic model is a tool for determining the justifiable cost of new sensors and subsystems with respect to value and operation. This process balances the R and D costs against the expense of maintaining current operations and allows for a method to calculate economic indices of performance that can be used as control points in deciding whether to continue development or suspend actions. The model can also be used as an integral part of an overall control loop utilizing real-time process data from the sensor groups to make production decisions (stop production and repair machine, continue and warn of anticipated problems, queue for repairs, etc.). This model has been successfully used and deployed in the CAFE Project. The economic model was one of seven (see Fig. 1) elements critical in developing an investment strategy. It has been successfully used in guiding the R and D activities on the CAFE Project, suspending activities on three new sensor technologies, and continuing development o f two others. The model has also been used to justify the development of a new prognostic approach for diagnosing machine health using COTS equipment and a new algorithmic approach. maintaining current operations and allows for a method …

The 1997 international Dirac II Series held at Los Alamos National Laboratory involved low temperature electrical transport and optical experiments in magnetic fields exceeding 800%, produced by explosive flux compression using Russian MC-1 generators. An overview of the scientific and technical advances achieved in this Series is given, together with a strategy for future work in this challenging experimental environment. A significant outcome was achieved in transport studies of microfabricated thin-film YBCO structures with the magnetic field in the CuO plane. Using a GHz transmission line technique at an ambient temperature of 1.6 K, an onset of dissipation was observed at 150 T (a new upper bound for superconductivity in any material), with a saturation of resistivity at 240 T. Comparison with the Pauli limit expected at B=155 T in this material suggests that the critical field in this geometry is limited by spin paramagnetism. In preparation for a Diract III series, a systematic temperature-dependent transport study of YBCO using in-plane magnetic fields of 150 T generated by single-turn coils, at temperatures over the range 10-100 K, has been undertaken in collaboration with the Japanese Megagauss Laboratory. The objective is to map out the phase diagram for this geometry, which …

Intracellular calcium is sequestered in closed membranes such as the sarcoplasmic or endoplasmic reticula and released at discretely distributed protein/receptor channels. The release kinetics can result in the propagation of waves of elevated calcium concentration. The main physical processes are reactions at the release sites and diffusion between the sites. The theory of chemical wave propagation in reaction-diffusion systems is in large part devoted to the study of systems in which there are no extrinsic inhomogeneities. The discrete distribution of the release sites plays a key role in determining the nature of the propagating wave. The authors analyze some simple reaction-diffusion models in order to elucidate the role of discreteness for chemical wave propagation.

{sup 139}La NQR studies in lightly doped La{sub 2}Cu{sub 1-x}Li{sub x}O{sub 4} and La{sub 1.8-x}Eu{sub 0.2}Sr{sub x}CuO{sub 4} are reviewed. A strong enhancement of the {sup 139}La relaxation rate with a peak accompanied by a sudden increase of the local field at low T has been observed similarly to La{sub 2-x}Sr{sub x}CuO{sub 4}. The anomalous magnetic properties are discussed in the light of the microscopic segregation of doped holes into hole-rich domain walls separating undoped AF domains.

If the correct interpretation of the Super-Kamiokande atmospheric neutrino data is {nu}{sub {mu}} {yields} {nu}{sub {tau}} oscillation, the contained data sample should already have more than 10 {tau} appearance events. We study the challenging task of detecting the {tau}, focusing on the decay chain {tau}{sup {+-}} {yields} {rho}{sup {+-}} {yields} {pi}{sup {+-}}{pi}{sup 0} in events with quasi-elastic {tau} production. The background level, which is currently quite uncertain because of a lack of relevant neutral current data, can be measured by the near detector in the K2K experiment. Our estimates of the background suggest that it may be possible to detect {tau} appearance in Super-Kamiokande with 5-10 years of running.

The primary objective of this research is to conduct advanced reservoir characterization and modeling studies in the Antelope Shale reservoir. Characterization studies will be used to determine the technical feasibility of implementing a CO2 enhanced oil recovery project in the Antelope Shale in Buena Vista Hills Field. The Buena Vista Hills pilot CO2 project will demonstrate the economic viability and widespread applicability of CO2 flooding in fractured siliceous shale reservoirs of the San Joaquin Valley. The research consists of four primary work processes: Reservoir Matrix and Fluid Characterization; Fracture Characterization; Reservoir Modeling and Simulation; and CO2 Pilot Flood and Evaluation. Work done in these areas is subdivided into two phases or budget periods. The first phase of the project will focus on the application of a variety of advanced reservoir characterization techniques to determine the production characteristics of the Antelope Shale reservoir. Reservoir models based on the results of the characterization work will be used to evaluate how the reservoir will respond to secondary recovery and EOR processes. The second phase of the project will include the implementation and evaluation of an advanced enhanced oil recovery (EOR) pilot in the United Anticline (West Dome) of the Buena Vista Hills Field.

With 180MJ/{micro}g, antiprotons offer the highest stored energy per unit mass of any known entity. We investigate the use of antiprotons to promote fast ignition in an ICF capsule and seek high gains with only modest compression of the main fuel. Unlike standard fast ignition where the ignition energy is supplied by an energetic, short pulse laser, the energy here is supplied through the ionization energy deposited when antiprotons annihilate at the center of a compressed fuel capsule. In the first of two candidate fast ignition schemes, the antiproton package is delivered by a low energy external ion beam. In the second, ''autocatalytic'' scheme, the antiprotons are pre-emplaced at the center of the capsule prior to compression. In both schemes, we estimate that {approximately}3x10{sup 13} antiprotons are required to initiate fast ignition in a typical ICF capsule and show that incorporation of a thin, heavy metal shell is desirable to enhance energy deposition in the igniter zone. In addition to obviating the need for a second energetic fast laser and vulnerable final optics, this scheme would achieve central without reliance on laser channeling through halo plasma or houlrahm debris. However, in addition to the unknowns involved in the storage and …

The Environmental Monitoring and Health Physics Laboratories at the Department of Energy`s (Department) Savannah River Site are over 40 years old and are approaching the end of their useful lives. The managing and operating contractor, Westinghouse Savannah River Company (Westinghouse), and the Savannah River Operations Office (Operations Office) proposed to build two new facilities to replace them. We conducted this audit to determine whether the construction of new laboratories was the most cost-effective alternative to accomplish the site`s environmental monitoring and health physics missions.

In May 1985, a National Pollutant Discharge Elimination System (NPDES) permit was issued for the Oak Ridge Y-12 Plant. As a condition of the permit a Biological Monitoring and Abatement Program (BMAP) was developed to demonstrate that the effluent limitations established for the Y- 12 Plant protect the classified uses of the receiving stream (East Fork Poplar Creek; EFPC), in particular, the growth and propagation of aquatic life (Lear et al. 1989). A second objective of the BMAP is to document the ecological effects resulting from the implementation of a water pollution control program designed to eliminate direct discharges of wastewaters to EFPC and to minimize the inadvertent release of pollutants to the environment. Because of the complex nature of the discharges to EFPC and the temporal and spatial variability in the composition of the discharges, a comprehensive, integrated approach to biological monitoring was developed. A new permit was issued to the Y-12 Plant on April 28, 1995 and became effective on July 1, 1995. Biological monitoring continues to be required under the new permit. The BMAP consists of four major tasks that reflect different but complementary approaches to evaluating the effects of the Y-12 Plant discharges on the aquatic …

The purpose of this report is to examine the Department of Transportation`s (DOT) National Transportation System (NTS) initiative, to document what has been learned, and to outline a National Transportation Network Analysis Capability (NTNAC) based on a ``TRANSIMS-like`` approach. This study was conducted over a two month period at the end of FY1997. The scope of the effort was carefully defined to accommodate the short time horizon and to provide focus to a very large analytical problem. The objectives were to: (1) define the NTS and the NTS problem; (2) identify problem characteristics; (3) describe an analytical solution based on the TRANSIMS approach; (4) identify data requirements and availability; (5) develop criteria for a scenario to be used in a prototype demonstration; and (6) select a scenario for the prototype demonstration.

Laboratory, numerical simulation, and field studies have been conducted to assess the potential use of micellar-surfactant solutions to solubilize chlorinated solvents contaminating sand and gravel aquifers. Ninety-nine surfactants were screened for their ability to solubilize trichloroethene (TCE), perchloroethylene (PCE), and carbon tetrachloride (CTET). The field test was conducted in the alluvial aquifer which is located 20 to 30 meters beneath a vapor degreasing operation at Paducah Gaseous Diffusion Plant. This aquifer has become contaminated with TCE due to leakage of perhaps 40,000 liters of TCE, which has generated a plume of dissolved TCE extending throughout an area of approximately 3 km{sup 2} in the aquifer. Most of the TCE is believed to be present in the overlying lacustrine deposits and in the aquifer itself as a dense, non-aqueous phase liquid, or DNAPL. The objective of the field test was to assess the efficacy of the surfactant for in situ TCE solubilization. Although the test demonstrated that sorbitan monooleate was unsuitable as a solubilizer in this aquifer, the single-well test was demonstrated to be a viable method for the in situ testing of surfactants or cosolvents prior to proceeding to full-scale remediation.

None

None

This final report provides technical information on the development of a near infrared reflectance spectroscopy (NIRS) system for the analysis of alfalfa hay. The purpose of the system is to provide consistent quality for processing alfalfa stems for fuel and alfalfa leaf meal products for livestock feed. Project tasks were to: (1) develop an NIRS driven analytical system for analysis of alfalfa hay and processed alfalfa products; (2) assist in hiring a qualified NIRS technician and recommend changes in testing equipment necessary to provide accurate analysis; (3) calibrate the NIRS instrument for accurate analyses; and (4) develop prototype equipment and sampling procedures as a first step towards development of a totally automated sampling system that would rapidly sample and record incoming feedstock and outbound product. An accurate hay testing program was developed, along with calibration equations for analyzing alfalfa hay and sun-cured alfalfa pellets. A preliminary leaf steam calibration protocol was also developed. 7 refs., 11 figs., 10 tabs.

This safety evaluation for packaging (SEP) documents the ability of the Special Environmental Radiometallurgy Facility (SERF) Cask to meet the requirements of WHC-CM-2-14, Hazardous Material Packaging and Shipping, for transfer of Type B quantities (up to highway route controlled quantities) of radioactive material within the 300 Area of the Hanford Site. This document shall be used to ensure that loading, tie down, transport, and unloading of the SERF Cask are performed in accordance with WHC-CM-2-14. This SEP is valid until October 1, 1999. After this date, an update or upgrade to this document is required.

This document is the final laboratory report for Tank 241-AP-105. Push mode core segments were removed from Risers 24 and 28 between July 2, 1997, and July 14, 1997. Segments were received and extruded at 222-S Laboratory. Analyses were performed in accordance with Tank 241-AP-105 Push Mode Core Sampling and Analysis Plan (TSAP) (Hu, 1997) and Tank Safety Screening Data Quality Objective (DQO) (Dukelow, et al., 1995). None of the subsamples submitted for total alpha activity (AT), differential scanning calorimetry (DSC) analysis, or total organic carbon (TOC) analysis exceeded the notification limits as stated in TSAP and DQO. The statistical results of the 95% confidence interval on the mean calculations are provided by the Tank Waste Remediation Systems Technical Basis Group, and are not considered in this report. Appearance and Sample Handling Two cores, each consisting of four segments, were expected from Tank 241-AP-105. Three cores were sampled, and complete cores were not obtained. TSAP states core samples should be transported to the laboratory within three calendar days from the time each segment is removed from the tank. This requirement was not met for all cores. Attachment 1 illustrates subsamples generated in the laboratory for analysis and identifies their sources. …

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Two-component models provide a good description of debris growth from the outset of launch to the present, predictions of future trends, and assessments of their sensitivity. Launch rate reductions produce less than proportional reductions in debris, for reasons that are discussed. The shift of debris to higher altitudes is assessed quantitatively, although the details of the growth are discussed elsewhere.

This article offers a basic review of fiber-optic sensing technology, or more specifically, fiber-optic sensing technology as applied to the qualitative or quantitative identification of a chemical sample, and how it works,

The Hanford Federal Facility Agreement and Consent Order (also known as the Tri-Party Agreement), established several milestones associated with the Initial Single-Shell Tank Retrieval System (ISSTRS). It also established that the scope of ISSTRS is the retrieval of a complete tank farm or an equivalent number of tanks. This study selected the single- shell tanks to be included in the ISSTRS work scope. This study determined that the ISSTRS work scope should consist of four tanks located in the A, AX, and C, tank farms. One of the tanks (Tank 241-AX-103) will be a salt cake retrieval demonstration tank. The other three (Tanks 241 -A-1 02, 241 -C-1 03, and 241-C-105) are 100-series tanks containing high interim storage risk, high long-term hazard waste and are assumed not to be leaking.

This system design requirement document establishes the performance, design, development and test requirements for the NIF Laser Auxiliary Systems. The Laser Auxiliary Systems consist of: a. Gas Cooling System; b. Low conductivity cooling water system; C. Deionized cooling water system; d. Electrical power distribution system. The gas cooling system will be used for cooling the main laser amplifier flashlamps and some smaller quantities will be used for purging Pockels cells and for diode pumps in preamplifier. The low conductivity cooling water system will be used for cooling the capacitor banks. The deionized cooling water system will be used to cool the multi-pass amplifier in the OPG PAM. Electrical power will be required for the OPG systems, Pockels cells, power conditioning, and amplifier support equipment.

This Subsystem Design Requirement document is a development specification that establishes the performance, design, development and test requirements for the target positioner subsystem (WBS 1.8.2) of the NIF Target Experimental System (WBS 1.8).

The purpose of this plan is to describe the preferred alternative for addressing the Central Shops Burning/Rubble Pit 631-6G (BRP6G) located at SRS, in northwestern Barnwell County, South Carolina and to provide an opportunity for public input into the remedial action selection process. Arsenic, beryllium, iron, and octachloro-dibenzo-p-dioxin isomers (OCDD) concentrations in the pit soil are at levels consistent with those found in the background. Therefore, the only contamination attributable to actions in BRP6G is PCB-1254. After the risk contributions of these chemicals are eliminated, the only remaining risk attributable to the pit soil is from PCB-1254 (about 2 {times} 10{sup {minus}6} via ingestion of vegetables grown on-site). The maximum concentration of PCB-1254 detected in the pit was 0.115 mg/kg, approximately 10% of the residential action level for PCBs of 1 mg/kg. Based on the results of the remedial investigation and the BRA, it is proposed that No Action be performed for the BRP6G. Considering the low levels of residual contamination present principally below 1.2 meters (4 feet) within the pit and the associated risks (about 2 {times} 10{sup {minus}6}) within the lower level of EPA`s target risk range, action is not warranted for this unit.

This report discusses the progress achieved during the multi-year program for curriculum and research enhancement for the Department of Nuclear Engineering at the University of California, Berkeley. Due to its declining utility for research, six years ago the department decommissioned the TRIGA research reactor, to make the space available for an accelerator-driven rotating target neutron source for fusion studies. The DOE has traditionally supported these university reactors, in part because they provide a vital educational experience for undergraduate students in reactor operations. Thus in 1993 the department was determined to use its DOE award to replace the undergraduate education that the research reactor formerly provided with an equal or superior educational experience. As this progress report indicates, they can now make a compelling argument that the effort has been successful. Students now have the opportunity to spend a full week at the Diablo Canyon Nuclear Power Plant, after spending two weeks full time at Berkeley studying plant operations. The students spend a full day operating the plant using the full-scale simulator, spend a day each individually and in small groups with operations and engineering personnel, and by the end of the week are intimately familiar with the basics of nuclear …