None

The Brownfields Economic Redevelopment Initiative is a pilot project to return idle or underused industrial and commercial facilities back to productive use, in situations where redevelopment is complicated by potential environmental contamination. The program is flexible, allowing cities to use a variety of approaches in utilizing grants of up to $200,000 to develop abandoned and underused sites, neighborhoods, and small regional areas. States and Indian tribes are eligible as well as local governments.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification;Authority to contact with a private vendor to provide telephone services to county jail inmates and related questions(ID# 39378).

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification; Whether a commissioner court is required to fill a vacancy in the office of justice of the peace (RQ-1061)

Large volumes of hydrocarbons are stored worldwide in surface and underground tanks. It is well documented [1] that all too often these tanks are found to leak, resulting in not only a loss of stored inventory but, more importantly, contamination to soil and groundwater. Two field experiments are reported herein to evaluate the utility of electrical resistance tomography (ERT) for detecting and locating leaks as well as delineating any resulting plumes emanating from steel underground storage tanks (UST). Current leak detection methods for single shell tanks require careful inventory monitoring, usually from liquid level sensors within the tank, or placement of chemical sensors in the soil under and around the tank. Liquid level sensors can signal a leak but are limited in sensitivity and, of course, give no information about the location or the leak or the distribution of the resulting plume. External sensors are expensive to retrofit and must be very densely spaced to assure reliable detection, especially in heterogeneous soils. The rational for using subsurface tomography is that it may have none of these shortcomings.

This Acceptance Test Report (ATR) documents for record purposes the field results, acceptance, and approvals of the completed acceptance test per HNF-SD-W417-ATP-001, ''Rail car Waste Transfer System Hydrostatic Test''. The test was completed and approved without any problems or exceptions.

The objective of this project was to create a system that delivered the appropriate information to the machine tool user just when needed and in the most appropriate form. The expertise of FM&T in the areas of instructional system design and multimedia creation was employed. Huffman brought together their subject matter experts from engineering, manufacturing, technical writing, and technical support. AlliedSignal FM&T worked together with Huffman as a design team to determine what tasks must be accomplished throughout the machine tool production phases, who performs those tasks, what skills are utilized, and what information is required to support the tasks. This project resulted in the identification of information flow throughout the life cycle of the machine tool products. Specialized tools required for assembly and calibration procedures were identified and their images captured, digitized, and stored for easy retrieval within the PSS. Subject matter experts were interviewed to determine which tasks require highly specialized knowledge and skills. These tasks were then performed on actual machines and the technicians' actions captured on video tape. The resulting video segments were edited, digitized, and integrated into the information system portion of the PSS where they are available for viewing alongside procedural information presented on …

The Lawrence Livermore National Laboratory has developed radar and imaging technologies with potential application in demining efforts. A patented wideband (impulse) radar that is very compact, very low cost, and very low power, has been demonstrated in test fields to be able to detect and image nonmetallic land mines buried in 2-10 cm of soil. The scheme takes advantage of the very short radar impulses and the ability to form a large synthetic aperture with many small individual units, to generate high resolution 2-D or 3-D tomographic images of the mine and surrounding ground. Radar range calculations predict that a vehicle-mounted or man-carried system is quite feasible using this technology. This paper presents the results of field tests using a prototype unit and describes practical mine detection system concepts. Predicted capabilities in terms of stand-off range and radiated power requirements are discussed.

Fluor Daniel Hanford, Inc. (FDH) is the Management Contractor for the Project Hanford Management Contract for the Department of Energy - Richland Operations Office. The Central Training Organization within FDH provides cross-cutting training services for its own personnel as well as for six subcontractors and six enterprise companies performing project work across the 560 square miles of the Hanford Site near Richland, Washington. Manager Safety Training has been presented by the Environmental, Safety and Health Training (ES and HT) team to managers, supervisors, team leads, and other personnel across the Hanford Site for over four years. The training is intended to heighten the awareness of management toward both identified (via accident/injury reports) and potential safety issues and concerns. Managers need to be aware of their responsibilities and to know where to go/who to contact (for example, company manuals or facility safety representatives) for additional information. At the conclusion of each training session, students are asked to complete a Level I evaluation (Kirkpatrick Model, see sidebar) and this feedback is reviewed by the instructors Commonly, revisions to the course content and presentation format are made solely by the ES and HT instructors and their manager each year.

This report describes the CTCN computer code, designed to solve the equations of transient colloidal transport of radionuclides in porous and fractured media. This Fortran 77 package solves systems of coupled nonlinear differential equations with a wide range of boundary conditions. The package uses the Method of Lines technique with a special section which forms finite-difference discretizations in up to four spatial dimensions to automatically convert the system into a set of ordinary differential equations. The CTCN code then solves these equations using a robust, efficient ODE solver. Thus CTCN can be used to solve population balance equations along with the usual transport equations to model colloid transport processes or as a general problem solver to treat up to four-dimensional differential systems.

Magnetic Circular X-ray Dichroism (MCXD) studies at K edges of Fe-Ni alloys reveal changes of the MCXD signal with composition and crystal structure. We observe that the signal at the invar composition is of comparable strength as other compositions. Moreover, the edge position is strongly dependent on lattice constant. First principles calculations demonstrate that the shape and strength of the signal strongly depends on the crystal orientation, composition, and lattice constant. We find direct relation between the MCXD signal and the p DOS. We find that the MCXD at K edge probes the magnetism due to itinerant electrons.

The Hanford Tanks Initiative (HTI) project is developing equipment for the removal of hard heel waste from the Hanford Site underground single-shell waste storage tanks. The HTI equipment will initially be installed in the 241-C-106 tank where its operation will be demonstrated. This study evaluates existing Hanford Site facilities and other sites for functional testing of the HTI equipment before it is installed into the 241-C-106 tank.

The Final Report describes results of further investigation of nature of vicinal sectorality in KDP crystals. Part I contains data of quantitative estimation of distinctions between the lattice parameters in the neighbor growth sectors and vicinal sectors of some rapidly grown KDP and DKDP crystals. It demonstrates opportunities of the plane wave X-ray topography for quantitative characterization of crystals grown in known conditions. Part II gives description of some mechanisms of striations formation in which the vicinal sectorality takes an important part.

This paper presents an overview of the hardware and software proposed for the ATLAS level 2 Trigger ROI Builder/Supervisor. The essential requirements of this system are that it operate at the design Level 1 Trigger rate of 100kHz and that it support the technical requirements of the architectures suggested for the ATLAS Level 2 Trigger. Commercial equipment and software support are used to the maximum extent possible, with support from dedicated hardware. Timing requirements and latencies are discussed and simulation results are presented.

The primary objective of this research is to optimize the design and operation of the bench scale batch reactor (SCTBR) for studying direct coal liquefaction at short contact times (.01 to 10 minutes or longer) . An additional objective is to study the kinetics of direct coal liquefaction particularly at short reaction times. Both of these objectives have been nearly achieved, however this work has shown the great importance of the liquefaction solvent characteristics and the solvent-catalyst interaction on the liquefaction process. This has prompted us to do a preliminary investigation of solvents and the solvent-catalyst systems in coal liquefaction. SUMMARY AND CONCLUSIONS 1) Conversion vs time data have been extended to 5 coals of ranks from lignite to low volatile bituminous coal. A broad range of reaction rates have been observed with a maximum in the high volatile bituminous range. 2) A series of direct coal liquefaction runs have been made using a range of nitrogen containing solvents that given high liquefaction conversions of coal. These runs are now being analyzed. 3) The coalification process has been shown by TGA to go through an intermediate stage which may account for the greater reactivity of bituminous coals in the direct …

Field emission cathodes (FECs) with characteristics of cold emission, low voltage operation, high current density and microscopic size meet the requirements for an electron source for use in vacuum microelectronics. Deposition efforts have focused on evaporation techniques, as electron beam, to produce the size and shape of cathode required for efficient operation. After two decades of development, the convention for FEC synthesis involves coating with very high tolerances for thickness uniformity using a planetary substrate fixture and a long source-to-substrate distance. A further reduction in the operating voltage results by increasing the density of emitters through a reduction of cathode size and spacing. In addition, the objective of scaling the substrate size from small to large areas has compounded the manufacturing requirements to a point beyond that which is obtainable through modifications to the conventional FEC deposition process. We have been successful in a new alternative approach to design, assemble and operate a system that enables FEC synthesis over large areas through the control of deposition source divergence and step-and-repeat substrate handling.

Risk ranking schemes have been used in safety analysis to distinguish lower risk accidents from higher risk accidents. This is necessary to identify those events that might warrant additional study or quantitative analysis and to ensure that any resources allocated for risk reduction are properly directed. A common method used for risk ranking utilizes risk matrices. These are typically 3x3 or 4x4 matrices having event consequences along one axis and event frequency along the other. Each block on the risk matrix represents some level of risk, and blocks presenting similar risk are often grouped together into one of three or four risk regions. Once a risk matrix has been identified, events are placed on the matrix based on an estimate of the event consequence and event frequency. Once the risk of each block on the matrix is defined, the relative risk of the events can be found based on where they are placed on the matrix. In most cases, the frequency axis of the matrix has numerical values associated with it, typically spanning several orders of magnitude. Often, the consequence axis is based on a qualitative scale, where consequences are judgment based. However, the consequence scale generally has implicit quantitative …

The Safeguards and Security (S and S) Assurance Program provides a continuous quality improvement approach to ensure effective, compliant S and S program implementation throughout the Los Alamos National Laboratory. Any issues identified through the various internal and external assessments are documented, tracked and closed using the Safeguards and Security Issue Management Program. The Laboratory utilizes an integrated S and S systems approach to protect US Department of Energy (DOE) interests from theft or diversion of special nuclear material (SNM), sabotage, espionage, loss or theft of classified/controlled matter or government property, and other hostile acts that may cause unacceptable impacts on national security, health and safety of employees and the public, and the environment. This document explains the basis, scope, and conduct of the S and S process to include: self-assessments, issue management, risk assessment, and root cause analysis. It also provides a discussion of S and S topical areas, roles and responsibilities, process flow charts, minimum requirements, methodology, terms, and forms.

This paper makes a case for the use of participatory ergonomics by and for ergonomists. A strategy for using participatory ergonomics in a conference workshop format is described. The process could be used as a tool for issues of common concern among ergonomists. it would also offer an experience of the participatory ergonomics process. An example workshop on quantifying costs and benefits of ergonomics is discussed.

Continuous, high quality profiles of water vapor, free of systematic bias, and of moderate temporal and spatial resolution, acquired over long periods at low operational and maintenance cost, are fundamental to the success of the ARM CART program. The development and verification of realistic climate model parameterizations for clouds and net radiation balance, and the correction of other CART site sensor observations for interferences due to the presence of water vapor are critically dependent on water vapor profile measurements. Application of profiles acquired with current techniques, have, to date, been limited by vertical resolution and uniqueness of solution [e.g. high resolution infrared (IR) Fourier transform radiometry], poor spatial and temporal coverage and high operating cost (e.g. radiosondes), or diminished daytime performance, lack of eye-safety, and high maintenance cost (e.g. Raman lidar). Recent developments in infrared laser and detector technology make possible compact IR differential absorption lidar (DIAL) systems at eye-safe wavelengths. In the study reported here, we develop DIAL system performance models and examine the potential of to solve some of the shortcomings of previous methods using parameterizations representative of current technologies. These models are also applied to diagnose and evaluate other strengths and weaknesses unique to the DIAL method …

The two different expressions for the radial particle flux {Lambda} found in the literature, as given by equations (2) and (4), are identical if the parallel electric field is small. The first expression is derivable in a fluid approach, whereas the second follows from the analysis of individual particle orbits. These expressions, without change, are also valid for an arbitrary axisymmetric magnetic geometry. In a situation where the parallel electric field is significant, the more accurate expression for the particle flux is in terms of the standard E x B velocity.