Numerical simulation of a short RFQ resonator using the MAFIA codes (open access)

Numerical simulation of a short RFQ resonator using the MAFIA codes

The electrical characteristics of a short (2{beta}{lambda}=0.4 m) resonator with large modulation (m=4) have been studied using the three dimensional codes, MAFIA. The complete resonator, including the modulated electrodes and a complex support structure, has been simulated using {approximately} 350,000 mesh points. Important characteristics studied include the resonant frequency, electric and magnetic fields distributions, quality factor and stored energy. The results of the numerical simulations are compared with the measurements of an actual resonator and analytical approximations. 7 refs., 3 figs., 1 tab.
Date: January 1, 1991
Creator: Wang, H.; Ben-Zvi, Ilan; Jain, A.; Paul, P. (State Univ. of New York, Stony Brook, NY (United States). Dept. of Physics) & Lombardi, A. (Istituto Nazionale di Fisica Nucleare, Legnaro (Italy). Lab. Nazionale di Legnaro)
Object Type: Article
System: The UNT Digital Library
INEX simulations of the optical performance of the AFEL (open access)

INEX simulations of the optical performance of the AFEL

The AFEL (Advanced Free-Electron Laser) Project at Los Alamos National Laboratory is presently under construction. The project's goal is to produce a very high-brightness electron beam which will be generated by a photocathode injector and a 20 MeV rf-linac. Initial laser experiments will be performed with a 1-cm-period permanent magnet wiggler which will generate intense optical radiation near a wavelength of 3.7 {mu}m. Future experiments will operate with slotted-tube'' electromagnetic wigglers (formerly called pulsed- wire'' wigglers). Experiments at both fundamental and higher-harmonic wavelengths are planned. This paper presents results of INEX (Integrated Numerical EXperiment) simulations of the optical performance of the AFEL. These simulations use the electron micropulse produced by the accelerator/beam transport code PARMELA in the 3-D FEL simulation code FELEX. 9 refs., 4 figs., 6 tabs.
Date: January 1, 1991
Creator: Goldstein, J.C.; Wang, T.S.F. & Sheffield, R.L.
Object Type: Article
System: The UNT Digital Library
DWPF waste glass Product Composition Control System (open access)

DWPF waste glass Product Composition Control System

The Defense Waste Processing Facility (DWPF) will be used to blend aqueous radwaste (PHA) with solid radwaste (Sludge) in a waste receipt vessel (the SRAT). The resulting SRAT material is transferred to the SME an there blended with ground glass (Frit) to produce a batch of melter feed slurry. The SME material is passed to a hold tank (the MFT) which is used to continuously feed the DWPF melter. The melter. The melter produces a molten glass wasteform which is poured into stainless steel canisters for cooling and, ultimately, shipment to and storage in a geologic repository. The Product Composition Control System (PCCS) is the system intended to ensure that the melt will be processible and that the glass wasteform will be acceptable. This document provides a description of this system.
Date: January 1, 1992
Creator: Brown, K.G. & Postles, R.L.
Object Type: Article
System: The UNT Digital Library
Decommissioning of a grout- and waste-filled storage tank in the 200 East Area of the Hanford Site (open access)

Decommissioning of a grout- and waste-filled storage tank in the 200 East Area of the Hanford Site

A self-concentrating waste tank located at the Strontium Semiworks Facility in the 200 East Area of the Hanford Site will be decommissioned following waste removal. During a previous decommissioning phase, the tank, thought to be empty, was filled with grout to prevent it from collapsing over time. Several years later, an agitator rod was pulled from within the tank and found to contain significant amounts of radiation, indicating there was still radioactive waste in the tank. Several alternative waste-removal options have been researched and evaluated. It is concluded that before the waste is to be disposed, the grout must be removed. This paper addresses that effort.
Date: January 1, 1991
Creator: Marske, S.G.
Object Type: Article
System: The UNT Digital Library
Reviews of ASME Section 11 pump and valve relief requests: Post Generic Letter 89-04 (open access)

Reviews of ASME Section 11 pump and valve relief requests: Post Generic Letter 89-04

This paper presents a discussion of ASME Section 11 Pump and Valve Inservice Testing relief request reviews by the NRC and their contractors. Topics that will be discussed include the scope of USNRC reviews in Technical Evaluation Reports (TERs) (and Safety Evaluation, SEs); including the basis for granting relief requests, the status of relief requests in IST Program updates, and the Generic Letter 89-04 approval process; and the level of technical detail required in submitted programs. This presentation is based on the experiences of Brookhaven National Laboratory in reviewing IST Programs for the Mechanical Engineering Branch of the US Nuclear Regulatory Commission.
Date: January 1, 1992
Creator: DiBiasio, A.
Object Type: Article
System: The UNT Digital Library
Brookhaven highlights for fiscal year 1991, October 1, 1990--September 30, 1991 (open access)

Brookhaven highlights for fiscal year 1991, October 1, 1990--September 30, 1991

This report highlights Brookhaven National Laboratory's activities for fiscal year 1991. Topics from the four research divisions: Computing and Communications, Instrumentation, Reactors, and Safety and Environmental Protection are presented. The research programs at Brookhaven are diverse, as is reflected by the nine different scientific departments: Accelerator Development, Alternating Gradient Synchrotron, Applied Science, Biology, Chemistry, Medical, National Synchrotron Light Source, Nuclear Energy, and Physics. Administrative and managerial information about Brookhaven are also disclosed. (GHH)
Date: January 1, 1991
Creator: Rowe, M.S.; Cohen, A.; Greenberg, D.; Seubert, L. & Kuper, J.B.H.
Object Type: Report
System: The UNT Digital Library
Experimental and theoretical investigations of marine stratocumulus cloud sensitivity to climate parameters using ship-trail clouds (open access)

Experimental and theoretical investigations of marine stratocumulus cloud sensitivity to climate parameters using ship-trail clouds

The formation and radiative properties of clouds are poorly parameterized in numerical climate models, especially marine boundary layer clouds. Twomey (1991), after describing the importance of cloud microphysics to the climate problem, states Clearly, many more field measurements and laboratory experiments are called for, rather than endless repetitions of computer simulations that are closely related to each other and parameterize in very similar ways.'' The effort described here is a field experimental effort supported by the Department of Energy under its Quantitative Links'' program. The project is called Ship-Trail Evolution Above High Updraft Naval Targets (SEAHUNT). The purpose of this study is to improve our understanding of the meteorological context in which ship trails and other perturbations to marine boundary layer clouds occur. 8 refs., 6 figs.
Date: January 1, 1991
Creator: Porch, W.; Buchwald, M.; Glatzmaier, T.; Kao, C.-Y.; Unruh, W. (Los Alamos National Lab., NM (United States)); Hudson, J. et al.
Object Type: Article
System: The UNT Digital Library
The limited streamer tubes system for the SLD warm iron calorimeter (open access)

The limited streamer tubes system for the SLD warm iron calorimeter

The SLD detector at the Stanford Linear Accelerator Center is a general purpose device for studying e{sup +}{epsilon}{sup {minus}} interaction at the Z{sup 0}. The SLD calorimeter system consists of two parts: a lead Liquid Argon Calorimeter (LAC) with both electromagnetic (22 radiation lengths) and hadronic sections (2.8 absorption lengths) housed inside the coil, and the Warm Ion limited streamer tubes Calorimeter (WIC) outside the coil which uses as radiator the iron of the flux return for the magnetic field. The WIC completes the measurement of the hadronic shower energy ({approximately}85% on average is contained in the LAC) and it provides identification and tracking for muons over 99% of the solid angle. In this note we report on the construction, test and commissioning of such a large system.
Date: January 1, 1992
Creator: Benvenuti, A. C.; Camanzi, B.; Piemontese, L.; Zucchelli, P.; Calcaterra, A.; De Sangro, R. et al.
Object Type: Article
System: The UNT Digital Library
Measurements of Non-Leptonic Weak Decays of Lambda Hypernuclei (open access)

Measurements of Non-Leptonic Weak Decays of Lambda Hypernuclei

Aspects of recent measurements of the mesonic and non-mesonic partial decay rates of {sub {Lambda}}{sup 5}He, and {sub {Lambda}}{sup 12}C are discussed. We comment on what the experiments tell us about the spin-isospin structure of {Delta}S=1 weak interaction in the nuclear environment. 14 refs., 1 fig.
Date: January 1, 1991
Creator: Schumacher, Reinhard A.
Object Type: Article
System: The UNT Digital Library
Electrochemistry of Thiobacillus ferrooxidans reactions with pyrite (open access)

Electrochemistry of Thiobacillus ferrooxidans reactions with pyrite

The objective of this project is to provide the fundamental information on the mechanisms of bacterial leaching of pyrite. The knowledge of how bacterial leaching of pyrite functions is essential for design and development of a technology for coal cleaning with bacteria. The features of major electrochemical techniques will be examined to find out if any of them can provide a diagnostic information on the mechanisms of related reactions.
Date: January 1, 1992
Creator: Pesic, B.
Object Type: Report
System: The UNT Digital Library
The microscopic world: A demonstration of electron microscopy for younger students (open access)

The microscopic world: A demonstration of electron microscopy for younger students

None
Date: January 1, 1991
Creator: Horton, L. L.
Object Type: Article
System: The UNT Digital Library
Alkali sorber (RABSAM), September 1, 1990--August 30, 1991 (open access)

Alkali sorber (RABSAM), September 1, 1990--August 30, 1991

The objective of this work is to develop a regenerable activated-bauxite sorber alkali monitor that requires no high-temperature/high-pressure sampling line for the reliable in situ measurement of alkali-vapor concentration in the exhaust from the pressurized fluidized-bed combustion of coal. 11 refs., 2 figs., 1 tab.
Date: January 1, 1991
Creator: Lee, S. H. D. & Swift, M. W.
Object Type: Article
System: The UNT Digital Library
A Novel Coal Feeder for Production of Low Sulfur Fuel (open access)

A Novel Coal Feeder for Production of Low Sulfur Fuel

During the past three months, the coal feeding system has been tested and currently undergoing evaluation at the University of Cincinnati. The system consists primarily of an auger feed tube which is used to both convey and provide desulfurization of a high sulfur coal feedstock. The coal is conveyed at temperatures ranging from 350 to 550{degrees}C and under normal atmospheric pressure. Under these mild processing conditions, the coal partially pyrolizes and emits sulfur in the form of hydrogen sulfide while maintaining a relatively high heating value in the char product. The evolved gases are evacuated from the reactor (the feed tube) to another absorbing bed where H{sub 2}S reacts with the sorbent, usually lime or limestone. The resultant sorbent utilization is substantially higher than the values found in current dry scrubbing system and the produced low-sulfur char may then be used in a conventional steam boiler.
Date: January 1, 1990
Creator: Khang, S. J. & Keener, T. C.
Object Type: Report
System: The UNT Digital Library
Lost circulation technology development status (open access)

Lost circulation technology development status

Lost circulation is the loss of drilling fluid from the wellbore to fractures or pores in the rock formation. In geothermal drilling, lost circulation is often a serious problem that contributes greatly to the cost of the average geothermal well. The Lost Circulation Technology Development Program is sponsored at Sandia National Laboratories by the US Department of Energy. The goal of the program is to reduce lost circulation costs by 30--50% through the development of mitigation and characterization technology. This paper describes the technical progress made in this program during the period April 1991--March 1992. 8 refs.
Date: January 1, 1992
Creator: Glowka, D. A.; Schafer, D. M.; Loeppke, G. E.; Scott, D. D.; Wernig, M. D. & Wright, E. K.
Object Type: Article
System: The UNT Digital Library
Sonic enhanced ash agglomeration and sulfur capture (open access)

Sonic enhanced ash agglomeration and sulfur capture

The major objective of the Phase 1 test program is to confirm the feasibility of the Manufacturing and Technology Conversion International, Inc. bimodal particle size approach to enhance particulate control by acoustic ash agglomeration. An ancillary objective of the Phase 1 effort is to demonstrate and confirm the feasibility of an acoustic field to enhance sulfur capture by increasing sorbent reactivity. Phase 1 tests are designed to cover the frequency range between 50 and 1400 Hz, establish monomodal baseline performance as a benchmark from which to measure the degree of enhancement expected from the bimodal approach, and, finally, to confirm the effectiveness of low-frequency fields over high-frequency fields for realistic particulate streams. The program will demonstrate the effectiveness of a unique approach which uses a bimodal distribution composed of large sorbent particles and fine fly ash particles to enhance ash agglomeration and sulfur capture at conditions found in direct coal-fired turbines. Under the impact of high-intensity sound waves, sorbent reactivity and utilization, it is theorized, will increase while agglomerates of fly ash and sorbents are formed which are readily collected in commercial cyclones. The work will extend the concept from the demonstration of feasibility (Phase 1), through proof-of-concept (Phase 2) …
Date: January 1, 1991
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Potential for use of high-temperature superconductors in fusion reactors (open access)

Potential for use of high-temperature superconductors in fusion reactors

The present rate of development of high-temperature superconductors (HTSs) is sufficiently rapid that there may be opportunities for their use in contemporary fusion devices such as the International Thermonuclear Experimental Reactor (ITER). The most likely 1application is for delivering power to the superconducting magnets, especially in substituting for the current leads between the temperatures of 4 K and 77K. A second possible application of HTSs is as a liquid-nitrogen-cooled power bus, connecting the power supplies to the magnets, thus reducing the ohmic heating losses over these relatively long cables. A third potential application of HTSs is as an inner high-field winding of the toroidal field coils that would operate at {approx}20 K. While the use of higher temperature magnets offers significant advantages to the reactor system, it is unlikely that tested conductors of this type will be available within the ITER time frame. 23 refs., 2 figs.
Date: January 1, 1991
Creator: Hull, J.R.
Object Type: Article
System: The UNT Digital Library
Power excitation by the use of a rf wiggler (open access)

Power excitation by the use of a rf wiggler

It is well-known that there are difficulties to obtain rf power sources of significant amount for frequencies larger than 3 GHz. Yet, rf sources in the centimeter/millimeter wavelength range would be very useful to drive, for example, high-gradient accelerating linacs for electron-positron linear colliders. We would like to propose an alternative method to produce such radiation. It makes use of a short electron bunch traveling along the axis of a waveguide which is at the same time excited by a TM propagating electromagnetic wave. It is well known that radiation can be obtained by wiggling the motion of the electrons in a direction perpendicular to the main one. The wiggling action can be included by electromagnetic fields in a fashion similar to the one caused by wiggler magnets. We found that an interesting mode of operation is to drive the waveguide with an excitation frequency very close to the cut off. For such excitation, the corresponding e.m. wave travels with a very large phase velocity which in turn has the effect to increase the wiggling action on the electron bunch. Our method, to be effective, relies also on the coherence of the radiation; that is the bunch length is taken …
Date: January 1, 1992
Creator: Ruggiero, Alessandro G.
Object Type: Article
System: The UNT Digital Library
Health effects models for nuclear power plant accident consequence analysis: Low LET radiation (open access)

Health effects models for nuclear power plant accident consequence analysis: Low LET radiation

This report describes dose-response models intended to be used in estimating the radiological health effects of nuclear power plant accidents. Models of early and continuing effects, cancers and thyroid nodules, and genetic effects are provided. Weibull dose-response functions are recommended for evaluating the risks of early and continuing health effects. Three potentially lethal early effects -- the hematopoietic, pulmonary, and gastrointestinal syndromes -- are considered. In addition, models are included for assessing the risks of several nonlethal early and continuing effects -- including prodromal vomiting and diarrhea, hypothyroidism and radiation thyroiditis, skin burns, reproductive effects, and pregnancy losses. Linear and linear-quadratic models are recommended for estimating cancer risks. Parameters are given for analyzing the risks of seven types of cancer in adults -- leukemia, bone, lung, breast, gastrointestinal, thyroid, and other.'' The category, other'' cancers, is intended to reflect the combined risks of multiple myeloma, lymphoma, and cancers of the bladder, kidney, brain, ovary, uterus and cervix. Models of childhood cancers due to in utero exposure are also developed. For most cancers, both incidence and mortality are addressed. The models of cancer risk are derived largely from information summarized in BEIR III -- with some adjustment to reflect more recent …
Date: January 1, 1990
Creator: Evans, J. S.
Object Type: Report
System: The UNT Digital Library
NQR-NMR studies of higher alcohol synthesis Cu-Co catalysts (open access)

NQR-NMR studies of higher alcohol synthesis Cu-Co catalysts

Copper and cobalt are the key elements in syngas conversion catalyst systems used for higher alcohol synthesis. Their proximity and synergy sensitively control the selectivity and efficiency of the process. It is believed that their outer electronic charge distribution which is responsible for their electrical and magnetic properties might be governing their catalytic properties also. To examine the correlation between catalytic and magnetic properties, a series of copper cobalt catalysts (Co/Cu ratio 5:1 to 5:5) with and without a support were prepared. The nuclear quadrupole resonance spectrum of copper and (zero-field) nuclear magnetic resonance spectrum of cobalt and magnetization and hysteresis character of the catalyst were analyzed. Similar to the catalytic results, the magnetic results also were found to be very sensitive to the preparation technique. The results indicate possible electron exchange between copper and cobalt, and cobalt and the support Titania.
Date: January 14, 1991
Creator: unknown
Object Type: Report
System: The UNT Digital Library
High temperature ceramic membrane reactors for coal liquid upgrading (open access)

High temperature ceramic membrane reactors for coal liquid upgrading

In this project we intend to study a novel process concept, i.e, the use of ceramic membranes reactors in upgrading of coal derived liquids. Membrane reactors have been used in a number of catalytic reaction processes in order to overcome the limitations on conversion imposed by thermodynamic equilibrium. They have, furthermore, the inherent capability for combining reaction and separation in a single step. Thus they offer promise for improving and optimizing yield, selectivity and performance of processes involving complex liquids, as those typically found in coal liquid upgrading. Ceramic membranes are a new class of materials, which have shown promise in a variety of industrial applications. Their mechanical and chemical stability coupled with a wide range of operating temperatures and pressures make them suitable for environments found in coal liquid upgrading. In this project we will evaluate the performance of Sol-Gel alumina membranes in coal liquid upgrading processes under realistic temperature and pressure conditions and investigate the feasibility of using such membranes in a membrane reactor based coal liquid upgrading process. In addition, the development of novel ceramic membranes with enhanced catalytic activity for coal-liquid upgrading applications, such as carbon-coated alumina membranes, will be also investigated.
Date: January 1, 1992
Creator: Tsotsis, T.T.
Object Type: Report
System: The UNT Digital Library
Development of a low intensity current monitor system (open access)

Development of a low intensity current monitor system

This report documents the development of a current transformer system used to measure pulsed ion beam currents with a wide dynamic intensity range (nA to mA, and factor of 10{sup 6}). Peak beam currents at the LAMPF accelerator typically range from 100 to nA to 40 mA with pulse widths varying from 30 to 1000 {mu}s. Signal conditioning of the peak current output provides an average current readout with a range of 1 nA to 2 mA, noise of approximately {plus minus}0.5 nA, and accuracy of {plus minus}0.1%. Since the system has proved stable and highly reliable, calibration is performed yearly. The prototype unit was built in 1985 and the final production unit was completed in early 1989. 5 refs., 14 figs.
Date: January 1, 1991
Creator: Gallegos, F.R.
Object Type: Article
System: The UNT Digital Library
Impact of Nonequilibrium Particle Temperature Considerations on Seeded Coal Combustion Plasma Properties (open access)

Impact of Nonequilibrium Particle Temperature Considerations on Seeded Coal Combustion Plasma Properties

This past quarter ending 12/30/91, the linear MHD channel simulation model has not only been completely specified but also fully modified to incorporate considerations for nonequilibrium particle temperatures. Testing of the modified model with the initial values from the first submodel (Richter's combustion zone model) and evaluation of the non-equilibrium particle temperature effect on the overall MHD performance is being held up. Reasons for the holdup is the lack of adequate response from Dr. Richter on questions about his nonequilibrium particle temperature model. These questions relate to our insistence to know precisely how the model works and also some review of the source code to ascertain that it is synchronization with our overall analytical development. We have decided to generate initial generator inlet particle parameter values by modifying the CEC code to provide particle parameter values.
Date: January 1, 1991
Creator: Oni, A. A.
Object Type: Report
System: The UNT Digital Library
Biological Production of Ethanol From Coal (open access)

Biological Production of Ethanol From Coal

The fermentation pH has been observed to be the key parameter affecting the ratio of ethanol to acetate produced by Clostridium ljungdahlii. The effects of controlled pH on cell growth and product formation by C. ljungdahlii were measured. It was found that cell concentration and acetate concentration increased with pH, while the ethanol concentration was highest at the lower pH. The molar product ratio of ethanol to acetate was 0.74 at pH 4.0, 0.39 at pH 4.5 and 0.12 at pH 5.0. Future experiments will concentrate on studying other important parameters such as agitation rate and nutrients concentrations with controlled pH as a preclude to continuous reactor studies.
Date: January 1, 1990
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Potential effects of maternal contribution on egg and larva population dynamics of striped bass: Integrated individual-based model and directed field sampling (open access)

Potential effects of maternal contribution on egg and larva population dynamics of striped bass: Integrated individual-based model and directed field sampling

We have used a bioenergetically-driven, individual-based model (IBM) of striped bass as a framework for synthesizing available information on population biology and quantifying, in a relative sense, factors that potentially affect year class success. The IBM has been configured to simulate environmental conditions experienced by several striped bass populations; i.e., in the Potomac River, MD; in Hudson River, NY; in the Santee-Cooper River System, SC, and; in the San Joaquin-Sacramento River System CA. These sites represent extremes in the geographic distribution and thus, environmental variability of striped bass spawning. At each location, data describing the physio-chemical and biological characteristics of the spawning population and nursery area are being collected and synthesized by means of a prioritized, directed field sampling program that is organized by the individual-based recruitment model. Here, we employ the striped bass IBM configured for the Potomac River, MD from spawning into the larval period to evaluate the potential for maternal contribution to affect larva survival and growth. Model simulations in which the size distribution and spawning day of females are altered indicate that larva survival is enhanced (3.3-fold increase) when a high fraction of females in the spawning population are large. Larva stage duration also is less …
Date: January 1, 1991
Creator: Cowan, J.H., Jr. (Maryland Univ., Solomons, MD (United States). Chesapeake Biological Lab.) & Rose, K.A. (Oak Ridge National Lab., TN (United States))
Object Type: Article
System: The UNT Digital Library