Other written product issued by the General Accounting Office with an abstract that begins "Pursuant to a legislative requirement, GAO reviewed the Securities and Exchange Commission's (SEC) new rule on the regulation of exchanges and alternative trading systems (ATS). GAO noted that: (1) the rule would allow ATS to choose whether to register as national securities exchanges, or to register as broker-dealers, depending on their activities and trading volume; (2) in addition, Regulation ATS will require alternative trading systems that trade a certain volume of securities to make their best prices known to the public and allow non-subscribers access to those prices; (3) the final rule would also amend Rules 6a-1, 6a-2, and 6a-3 regarding registration as a national securities exchange; and (4) SEC complied with applicable requirements in promulgating the rule."

Measurements of the transverse dependence of the flux on the symmetry plane were obtained on a series of endpacks mounted on a Main Injector prototype dipole. From these flux measurements, we determined the endfield shape, expressed in terms of normal harmonics, up to 14-pole. We describe the measurement and analysis procedure, and present the results for all endpacks that were tested. The final endpack (number 10) has a sextupole, normalized to the body, of +0.167 [plus minus] .072 units, and the relative field shape deviates by [lt] 1.2 units relative to the on-axis field strength over the range [vert bar]x[vert bar] [lt] 2.0[double prime]. These measurements indicate that Endpack 10 meets the requirements for the Main Injector dipole.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

The Electric Power Annual presents a summary of electric utility statistics at national, regional and State levels. The objective of the publication is to provide industry decisionmakers, government policymakers, analysts and the general public with historical data that may be used in understanding US electricity markets. The Electric Power Annual is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. ``The US Electric Power Industry at a Glance`` section presents a profile of the electric power industry ownership and performance, and a review of key statistics for the year. Subsequent sections present data on generating capability, including proposed capability additions; net generation; fossil-fuel statistics; retail sales; revenue; financial statistics; environmental statistics; electric power transactions; demand-side management; and nonutility power producers. In addition, the appendices provide supplemental data on major disturbances and unusual occurrences in US electricity power systems. Each section contains related text and tables and refers the reader to the appropriate publication that contains more detailed data on the subject matter. Monetary values in this publication are expressed in nominal terms.

Water and acid absorption tests of samples of a proposed replacement to current polyethylene foam used as fill material on the FB-Line cation columns have been completed. Water and nitric acid solution absorption of up to 4 volume percent was observed over approximately a 4 month period of time. Because of the nuclear safety implications, liquid absorption of a replacement fill material must be low. EthafoaM{trademark} 220 extruded polyethylene, a product available from Dow Chemical Company appears to be a good candidate material for replacement of the existing fill material. Establishment of 5 volume percent solution absorption specification appears to be both reasonable and achievable for a replacement foam, provided it is acceptable to nuclear safety personnel.

The anaerobic bacterium Rhodospirillum rubrum has been chosen for catalysis of the biological water gas shift reaction. Two bacteria, Chlorobium thiosulfatophilum and Chlorobium phaeobacteroides, are being evaluated as candidates for H{sub 2}S conversion to elemental sulfur. Since these latter two organisms both grow and convert H{sub 2}S in batch culture using standard basal medium, the choice of a suitable bacterium must be made in consideration of specific growth and uptake rates. Produced elemental sulfur stability against further oxidation to sulfate, and minimal use of H{sub 2} as a producing agent must also be considered. The effects of temperature on the performance of R. rubrum were evaluated. It was found that the cell concentration was highest at temperatures of 25 and 30{degree}C, and that the specific uptake rate was highest at temperatures of 30, 32 and 34{degree}C. No growth was observed at 37{degree}C. Also, temperature did not affect the yield of H{sub 2} from CO. Thus, R. rubrum may be used for biological rates gas shift at any temperature between 30 and 34{degree}C, although growth is maximized at lower temperatures. Preliminary studies with C. thiosulfatophilum showed rapid utilization of H{sub 2}S from the gas and liquid phases with subsequent production of …

The Oak Ridge Y-12 Plant operates its Criticality Accident Alarm System (CAAS) according to the guidance of Standard ANSI/ANS-8.3-1986. This standard requires that the detector shall not fail to initiate an alarm when subjected to a radiation field of at least 0.1 Gy/s (10 rad/s). It also requires that the system shall be designed to immediately detect the minimum accident of concern and shall produce an alarm within one half second of activation. Sixty-three new detectors that use plastic scintillators have been obtained to upgrade the current Y-12 Plant CAAS. To ensure that these detectors can support the above criteria, testing was done using the SPR III reactor at the Sandia Pulsed Reactor Facility.

Measurements of the transverse dependence of the flux on the symmetry plane were obtained on a series of endpacks mounted on a Main Injector prototype dipole. From these flux measurements, we determined the endfield shape, expressed in terms of normal harmonics, up to 14-pole. We describe the measurement and analysis procedure, and present the results for all endpacks that were tested. The final endpack (number 10) has a sextupole, normalized to the body, of +0.167 {plus_minus} .072 units, and the relative field shape deviates by {lt} 1.2 units relative to the on-axis field strength over the range {vert_bar}x{vert_bar} {lt} 2.0{double_prime}. These measurements indicate that Endpack 10 meets the requirements for the Main Injector dipole.

The Tank Waste Remediation System Mission Analysis Report identifies the initial states of the system and the desired final states of the system. The Mission Analysis Report identifies target measures of success appropriate to program-level accomplishments. It also identifies program-level requirements and major system boundaries and interfaces.

The anaerobic bacterium Rhodospirillum rubrum has been chosen for catalysis of the biological water gas shift reaction. Two bacteria, Chlorobium thiosulfatophilum and Chlorobium phaeobacteroides, are being evaluated as candidates for H{sub 2}S conversion to elemental sulfur. Since these latter two organisms both grow and convert H{sub 2}S in batch culture using standard basal medium, the choice of a suitable bacterium must be made in consideration of specific growth and uptake rates. Produced elemental sulfur stability against further oxidation to sulfate, and minimal use of H{sub 2} as a producing agent must also be considered. The effects of temperature on the performance of R. rubrum were evaluated. It was found that the cell concentration was highest at temperatures of 25 and 30{degree}C, and that the specific uptake rate was highest at temperatures of 30, 32 and 34{degree}C. No growth was observed at 37{degree}C. Also, temperature did not affect the yield of H{sub 2} from CO. Thus, R. rubrum may be used for biological rates gas shift at any temperature between 30 and 34{degree}C, although growth is maximized at lower temperatures. Preliminary studies with C. thiosulfatophilum showed rapid utilization of H{sub 2}S from the gas and liquid phases with subsequent production of …

None

Condensed history algorithms are approximate electron transport Monte Carlo methods in which the cumulative effects of multiple collisions are modeled in a single step of (user-specified) path length s{sub 0}. This path length is the distance each Monte Carlo electron travels between collisions. Current condensed history techniques utilize a splitting routine over the range 0 {le} s {le} s{sub 0}. For example, the PEnELOPE method splits each step into two substeps; one with length {xi}s{sub 0} and one with length (1 {minus}{xi})s{sub 0}, where {xi} is a random number from 0 < {xi} < 1. because s{sub 0} is fixed (not sampled from an exponential distribution), conventional condensed history schemes are not transport processes. Here the authors describe a new condensed history algorithm that is a transport process. The method simulates a transport equation that approximates the exact Boltzmann equation. The new transport equation has a larger mean free path than, and preserves two angular moments of, the Boltzmann equation. Thus, the new process is solved more efficiently by Monte Carlo, and it conserves both particles and scattering power.

The International Workshop on Cold Moderators for Pulsed Neutron Sources resulted from the coincidence of two forces. Our sponsors in the Materials Sciences Branch of DOE's Office of Energy Research and the community of moderator and neutron facility developers both realized that it was time. The Neutron Sources Working Group of the Megascience Forum of the Organization for Economic Cooperation and Development offered to contribute its support by publishing the proceedings, which with DOE and Argonne sponsorship cemented the initiative. The purposes of the workshop were: to recall and improve the theoretical groundwork of time-dependent neutron thermalization; to pose and examine the needs for and benefits of cold moderators for neutron scattering and other applications of pulsed neutron sources; to summarize experience with pulsed source, cold moderators, their performance, effectiveness, successes, problems and solutions, and the needs for operational data; to compile and evaluate new ideas for cold moderator materials and geometries; to review methods of measuring and characterizing pulsed source cold moderator performance; to appraise methods of calculating needed source characteristics and to evaluate the needs and prospects for improvements; to assess the state of knowledge of data needed for calculating the neutronic and engineering performance of cold moderators; …

The Intense Pulsed Neutron Source (IPNS) at Argonne National Laboratory is a spallation neutron source dedicated to materials research. Its three cryogenic methane moderators provide twelve neutron beams to fourteen instruments and test facilities. This report concerns ongoing activities for benchmarking our Monte Carlo model of the IPNS neutron generation system. This paper concentrates on the techniques (both experimental and calculational) used in such benchmarking activities.

This paper contains a general description of the field tests proposed for the Yucca Mountain Site Characterization Project repository sealing program. The tests are intended to resolve various performance and emplacement concerns associated with sealing components. Ten discrete tests are proposed to address these concerns. These tests are divided into two categories -- simple and complex tests. The simple tests are: the small-scale in situ tests: the intermediate-scale borehole seal tests; the fracture grouting tests; the surface backfill tests; and the grouted rock mass tests. The complex tests are the seepage control tests; in situ backfill tests; in situ bulkhead tests; large-scale shaft seal tests; and remote borehole seal tests. These tests are proposed to be performed in welded and nonwelded tuff environments. The final selection of sealing tests will depend on the nature of the geologic and hydrologic conditions encountered during the development of the exploratory studies facility. Some tests may be performed before license application and some after license application.

Water and acid absorption tests of samples of a proposed replacement to current polyethylene foam used as fill material on the FB-Line cation columns have been completed. Water and nitric acid solution absorption of up to 4 volume percent was observed over approximately a 4 month period of time. Because of the nuclear safety implications, liquid absorption of a replacement fill material must be low. EthafoaM[trademark] 220 extruded polyethylene, a product available from Dow Chemical Company appears to be a good candidate material for replacement of the existing fill material. Establishment of 5 volume percent solution absorption specification appears to be both reasonable and achievable for a replacement foam, provided it is acceptable to nuclear safety personnel.

A new experimental technique has been devised to measure residual stresses in ductile materials with a combination of laser speckle pattern interferometry and spot heating. The speckle pattern interferometer measures in-plane deformations while the heating provides for very localized stress relief. The residual stresses are determined by the amount of strain that is measured subsequent to the heating and cool-down of the region being interrogated. A simple lumped parameter model is presented to provide a description of the method. This description is followed by presentations of the results of finite element analyses and experimental results with uniaxial test specimens. Excellent agreement between the experiments and the computer analyses were obtained.

We report the first experimental verification of the MHD dynamo in the RFP. A burst of magnetohydrodynamic (MHD) dynamo electric field is observed during the sawtooth crash, followed by an increase in the local parallel current in the MST RFP edge. By measuring each term, the parallel MHD mean-field Ohm`s law is observed to hold within experimental error bars both between and during sawtooth crashes.

This report provides information on the seismic hazard for design of the proposed Environmental Restoration Disposal Facility (ERDF), a facility designed for the disposal of wastes generated during the cleanup of Hanford Site aggregate areas. The preferred ERDF site is located south and east of 200 East and 200 West Areas. The Washington State Groundwater Protection Program (WAC 173-303-806 (4)(a)(xxi)) requires that the characteristics of local and regional hydrogeology be defined. A plan for that work has been developed (Weekes and Borghese 1993). In addition, WAC 173-303-282 provides regulatory guidance on siting a dangerous waste facility, and US Department of Energy (DOE) Order 5480.28 requires consideration of natural phenomena hazards mitigation for DOE sites and facilities. This report provides information to evaluate the ERDF site with respect to seismic hazard. The ERDF will be a Corrective Action Management Unit (CAMU) as defined by 40 CFR 260.10.

The Safety Equipment List (SEL) supports Analysis Report (FSAR), WHC-SD-CP-SAR-021 and the Plutonium Finishing Plant Operational Safety Requirements (OSRs), WHC-SD-CP-OSR-010. The SEL is a breakdown and classification of all Safety Class 1, 2, and 3 equipment, components, or system at the Plutonium Finishing Plant complex.

This report discusses the events leading to the creation of a permanent international criminal tribunal and U.S. perspectives on the Court including: problematic provisions in the ICC Treaty, congressional considerations, and potential implications for U.S. foreign policy.

None

None

None