A large component of radon entry cannot be explained by pressure differences between the soil and inside the structures. The persistence of this radon entry even when the house is pressurized by 1 Pa indicates that it must be due to molecular diffusion. The radon entry rate as measured by accumulators below ground level (soil + concrete) is roughly 2 times greater than that measured above ground level (concrete alone). The soil permeability is about 10{sup {minus}12} m{sup 2} and does not change dramatically with depth down to 2 m. The diffusion component of radon entry is reduced by about 30% when the floor wall joint is sealed. The Rn3D model is operating on our computer system and is being modified to accommodate the geometrical configurations of the underground test structure.

The polycrystalline nature of thin-film CdTe and CuInSe{sub 2} solar cells continues to be a major factor in several individual losses that limit overall cell efficiency. This report describes progress in the quantitative separation of these losses, including both measurement and analysis procedures. It also applies these techniques to several individual cells to help document the overall progress with CdTe and CuInSe{sub 2} cells. Notably, CdTe cells from Photon Energy have reduced window photocurrent losses to 1 mA/Cm{sup 2}; those from the University of South Florida have achieved a maximum power voltage of 693 mV; and CuInSe{sub 2} cells from International Solar Electric Technology have shown a hole density as high as 7 {times} 10{sup 16} cm{sup {minus}3}, implying a significant reduction in compensation. 9 refs.

The polycrystalline nature of thin-film CdTe and CuInSe{sub 2} solar cells continues to be a major factor in several individual losses that limit overall cell efficiency. This report describes progress in the quantitative separation of these losses, including both measurement and analysis procedures. It also applies these techniques to several individual cells to help document the overall progress with CdTe and CuInSe{sub 2} cells. Notably, CdTe cells from Photon Energy have reduced window photocurrent losses to 1 mA/Cm{sup 2}; those from the University of South Florida have achieved a maximum power voltage of 693 mV; and CuInSe{sub 2} cells from International Solar Electric Technology have shown a hole density as high as 7 {times} 10{sup 16} cm{sup {minus}3}, implying a significant reduction in compensation. 9 refs.

We are making progress on our investigation of the mechanism of olefin exchange with Os{sub 2}(C{sub 2}H{sub 4})(CO){sub 8}. We are probing this system by kinetic study of the reaction of Os{sub 2}(C{sub 2}H{sub 4})(CO){sub 8} with butyl acrylate (BA) under various pressures of ethylene.

We are making progress on our investigation of the mechanism of olefin exchange with Os{sub 2}(C{sub 2}H{sub 4})(CO){sub 8}. We are probing this system by kinetic study of the reaction of Os{sub 2}(C{sub 2}H{sub 4})(CO){sub 8} with butyl acrylate (BA) under various pressures of ethylene.

The project objective is to explore the generation of soft X-ray laser radiation in a plasma column created by a fast capillary discharge. The proposed capillary lasing scheme offers the potential for compact, simple and efficient soft X-ray laser sources. For this purpose a compact, fast pulse generator which produces 100 kA current pulses with a risetime of 11 ns was constructed. Initial experiments were conducted in evacuated capillaries, in which the plasma is produced by ablation of the capillary walls. The soft X-ray emission from discharges in polyethylene capillary channels was studied to investigate the possibility of amplification in the 3-2 transition of C VI, at {lambda} = 18.2 nm. Time-resolved spectra in which this transition appears anomalously intense with respect to the 4--2 transition of the same ion were obtained. To date, however, this phenomenoa could not be confirmed as gain, as the intensity of the 18.2 nm line has not been observed to increase exponentially as a function of the capillary length. Encouraging results were obtained by fast pulse discharge excitation of capillaries filled with preionized gas. High temperature (Te > 150 eV), small diameter ({approximately}200 {mu}m) plasma columns were efficiently generated. Fast current pulse excitation of …

The project objective is to explore the generation of soft X-ray laser radiation in a plasma column created by a fast capillary discharge. The proposed capillary lasing scheme offers the potential for compact, simple and efficient soft X-ray laser sources. For this purpose a compact, fast pulse generator which produces 100 kA current pulses with a risetime of 11 ns was constructed. Initial experiments were conducted in evacuated capillaries, in which the plasma is produced by ablation of the capillary walls. The soft X-ray emission from discharges in polyethylene capillary channels was studied to investigate the possibility of amplification in the 3-2 transition of C VI, at {lambda} = 18.2 nm. Time-resolved spectra in which this transition appears anomalously intense with respect to the 4--2 transition of the same ion were obtained. To date, however, this phenomenoa could not be confirmed as gain, as the intensity of the 18.2 nm line has not been observed to increase exponentially as a function of the capillary length. Encouraging results were obtained by fast pulse discharge excitation of capillaries filled with preionized gas. High temperature (Te > 150 eV), small diameter ({approximately}200 {mu}m) plasma columns were efficiently generated. Fast current pulse excitation of …

The entry rate of {sup 22}Rn into a basement structure was measured continuously. These measurements demonstrated that radon entry did not vanish even when the structure was slightly pressurized. This persistent entry has been determined to be dominated by diffusion through the floor and walls and a combination of diffusion and convection through the floor-wall joint. The highest indoor radon concentrations occurred during calm periods when the pressure differentials between the inside and outside of the structure were small. The objectives of this work were to identify the origins of the radon and investigate the entry pathways. The radon could originate either in the concrete or in the soil surrounding the structure. Entry pathways into the basement were through the concrete floor and walls as well as through the floor-wall joint. The contributions of the origins and entry pathways were determined by continuously measuring the radon entry rate into the basement, using a trace gas system, and the flux density through portions of the floor and walls. Radon entry through the floor-wall joint could be controlled using a baseboard barrier system. Results indicated that, during calm conditions with wind speeds less than 1 m s{sup {minus}1}, 25 % of the …

This study was designed to evaluate the effectiveness of aftermarket fuel delivery systems for vehicles fueled by compressed natural gas (CNG) and liquefied petroleum gas (LPG). Most of the CNG and LPG vehicles studied were converted to the alternative fuel after purchase. There are wide variations in the quality of the conversion hardware and the installation. This leads to questions about the overall quality of the converted vehicles, in terms of emissions, safety, and performance. There is a considerable body of emissions data for converted light-duty vehicles, and a smaller amount for medium- and heavy-duty vehicles. However, very few of these data involve real world conditions, and there is growing concern about in-use emissions. This report also attempts to assess factors that could allow in-use emissions to vary from the ``best-case`` results normally reported. The study also addresses issues of fuel supply, fuel composition, performance, safety, and warranty waivers. The report is based on an extensive literature and product survey and on the author`s experience with fuel delivery systems for light-duty vehicles.

This study was designed to evaluate the effectiveness of aftermarket fuel delivery systems for vehicles fueled by compressed natural gas (CNG) and liquefied petroleum gas (LPG). Most of the CNG and LPG vehicles studied were converted to the alternative fuel after purchase. There are wide variations in the quality of the conversion hardware and the installation. This leads to questions about the overall quality of the converted vehicles, in terms of emissions, safety, and performance. There is a considerable body of emissions data for converted light-duty vehicles, and a smaller amount for medium- and heavy-duty vehicles. However, very few of these data involve real world conditions, and there is growing concern about in-use emissions. This report also attempts to assess factors that could allow in-use emissions to vary from the best-case'' results normally reported. The study also addresses issues of fuel supply, fuel composition, performance, safety, and warranty waivers. The report is based on an extensive literature and product survey and on the author's experience with fuel delivery systems for light-duty vehicles.

The limiting role of polycrystallinity in thin-film solar calls has been reduced somewhat during the past year, and efficiencies of both CdTe and CuInSe[sub 2] cells are approaching 15%. Quantitative separation of loss mechanisms shows that individual losses, with the exception of forward recombination current, can be made comparable to their single crystal counterparts. One general manifestation of the extraneous trapping states in that the voltage of all polycrystalline thin-film cells drifts upward by 10--50 mV following the onset of illumination.

The limiting role of polycrystallinity in thin-film solar calls has been reduced somewhat during the past year, and efficiencies of both CdTe and CuInSe{sub 2} cells are approaching 15%. Quantitative separation of loss mechanisms shows that individual losses, with the exception of forward recombination current, can be made comparable to their single crystal counterparts. One general manifestation of the extraneous trapping states in that the voltage of all polycrystalline thin-film cells drifts upward by 10--50 mV following the onset of illumination.

This report is divided into 5 sections: Ru[sub 4]/Fe complexes of tetra(4[prime]-methyl-2,2[prime]-bipyridine)porphyrin--catalytic epoxidation of olefins; water oxidation catalysis by doubly linked [mu]-oxo ruthenium complexes; polymer films formed by oxidation of transition metal electrodes into solutions of bisbipyridinealkane ligands; polymer films containing [CpMo([mu]-S)][sub 2]S[sub 2]CHR dinuclear clusters;and conducting polymer films for catalyst incorporation.

This report is divided into 5 sections: Ru{sub 4}/Fe complexes of tetra(4{prime}-methyl-2,2{prime}-bipyridine)porphyrin--catalytic epoxidation of olefins; water oxidation catalysis by doubly linked {mu}-oxo ruthenium complexes; polymer films formed by oxidation of transition metal electrodes into solutions of bisbipyridinealkane ligands; polymer films containing [CpMo({mu}-S)]{sub 2}S{sub 2}CHR dinuclear clusters;and conducting polymer films for catalyst incorporation.

The report is divided into: vibrational models for surface ethylidenes (on catalyst surfaces); alpha vs beta hydrogen elimination in formation of propene from an osmacyclobutane; mechanism of formation and fragmentation of diosmacyclobutanes; reaction of dienes and allenes with diosmacyclobutanes; structure of Os(CO)[sub 4](C[sub 2]H[sub 4]), an osmacyclopropane; and reaction of [mu]-oxobis [(trifluoromethanesulfanato) (phenyl)iodine(III)] with Group 14 propargyl derivatives and a propargyl ether. 16 refs, figs.

The report is divided into: vibrational models for surface ethylidenes (on catalyst surfaces); alpha vs beta hydrogen elimination in formation of propene from an osmacyclobutane; mechanism of formation and fragmentation of diosmacyclobutanes; reaction of dienes and allenes with diosmacyclobutanes; structure of Os(CO){sub 4}(C{sub 2}H{sub 4}), an osmacyclopropane; and reaction of {mu}-oxobis [(trifluoromethanesulfanato) (phenyl)iodine(III)] with Group 14 propargyl derivatives and a propargyl ether. 16 refs, figs.

Focus has been mainly on preparation and characterization of triply bridged dinuclear complexes containing a tris-2-2'- bipyridineruthenium chromophore and a second tris-bipyridine metal complex which is to serve as electron donor or acceptor, and of linked RuL[sub 3]-containing D-C-A complexes where D is a phenothiazine donor and A is a diquat type acceptor. (DLC)

Focus has been mainly on preparation and characterization of triply bridged dinuclear complexes containing a tris-2-2`- bipyridineruthenium chromophore and a second tris-bipyridine metal complex which is to serve as electron donor or acceptor, and of linked RuL{sub 3}-containing D-C-A complexes where D is a phenothiazine donor and A is a diquat type acceptor. (DLC)

A fully-parameterized model for the formation and growth of aerosols via gas-to-particle conversion has been developed and tested. A particularly significant contribution is a new method for the prediction of numbers of particles nucleated using information on the vapor source rate, relative humidity, and preexisting aerosol alone, thus eliminating the need to solve a system of coupled ODEs. Preliminary tests indicate substantial reduction in computational costs, but it is recommended that the BIMODAM model be incorporated into a large-scale model of the sulfur cycle in order to more fully test its computational feasibility.

This project addressed two main goals and one much smaller one. The main goals were (1) to improve the significance, reliability and information content in high-resolution NMR (nuclear magnetic resonance) characterization of coal samples and (2) to develop chemically informative NMR imaging techniques for coal. The minor goal was to explore advanced features of dynamic nuclear polarization (DNP) as a technique for coal characterization; this included the development of two DNP probes and the examination of DNP characteristics of various carbonaceous samples, including coals. {sup 13}C NMR advances for coal depended on large-sample MAS devices, employing either cross-polarization (CP) or direct polarization (DP) approaches. CP and DP spin dynamics and their relationships to quantitation and spin counting were elucidated. {sup 1}H NMR studies, based on CRAMPS, dipolar dephasing and saturation with perdeuteropyridine, led to a {sup 1}H NMR-based elucidation of chemical functionality in coal. {sup 1}H and {sup 13}C NMR imaging techniques, based on magic-angle spinning and rotating magnetic field gradients, were developed for introducing chemical shift information (hence, chemical detail) into the spatial imaging of coal. The TREV multiple-pulse sequence was found to be useful in the {sup 1}H CRAMPS imaging of samples like coal.

The objectives of the study were: to evaluate the response of grassland ecosystems to atmospheric change at regional and site scales, and to develop multiscaled modeling systems to relate ecological and atmospheric models with different spatial and temporal resolutions. A menu-driven shell was developed to facilitate use of models at different temporal scales and to facilitate exchange information between models at different temporal scales. A detailed ecosystem model predicted that C{sub 3} temperate grasslands wig respond more strongly to elevated CO{sub 2} than temperate C{sub 4} grasslands in the short-term while a large positive N-PP response was predicted for a C{sub 4} Kenyan grassland. Long-term climate change scenarios produced either decreases or increases in Colorado plant productivity (NPP) depending on rainfall, but uniform increases in N-PP were predicted in Kenya. Elevated CO{sub 2} is likely to have little effect on ecosystem carbon storage in Colorado while it will increase carbon storage in Kenya. A synoptic climate classification processor (SCP) was developed to evaluate results of GCM climate sensitivity experiments. Roughly 80% agreement was achieved with manual classifications. Comparison of lx and 2xCO{sub 2} GCM Simulations revealed relatively small differences.

The overall goal of this research is to develop a scheme to parameterize diabatic heating, moisture/water substance, and momentum transports, and precipitation from mesoscale convective systems (MCSs) for use in general circulation models (GCMs). Our approach is to perform explicit cloud-resolving simulations of MCSs in the spirit of the GEWEX Cloud Systems Study (GCSS), by using the Regional Atmospheric Modeling System (RAMS) developed at Colorado State University (CSU). We then perform statistical analyses (conditional sampling, ensemble-averages, trajectory analyses) of simulated MCSs to assist in fabricating a parameterization scheme, calibrating coefficients, and provide independent tests of the efficacy of the parameterization scheme. A cloud-resolving simulation of ordinary cumulonimbi forced by sea breeze fronts has been completed. Analysis of this case and comparison with parameterized convection simulations has resulted in a number of refinements in the scheme. Three three-dimensional, cloud-resolving simulations of MCSs have been completed. Statistical analyses of model-output data are being performed to assist in developing a parameterization scheme of MCSs in general circulation models.

This report describes work to conduct several investigations of thin-film polycrystalline solar cells. (1) An analysis of high-efficiency solar cells fabricated at the University of South Florida showed significant reduction in forward recombination current, and the cells were stable over a 3-month test period. (2) Transient voltage effects were documented in a large number of polycrystalline cells and were attributed to long-lived trapping states sensitive to voltage changes near one-half open-circuit voltage. (3) Collection efficiency and its voltage dependence were carefully calculated. The typical effect on photocurrent at operating voltages is about 2% for CuInSe{sub 2}, and less for other cells.

Assignment of the vibrational modes Of Os{sub 2}(CO){sub 8}(CHCH{sub 3}) and Os(CO){sub 4}(C{sub 2}H{sub 4)} has given fingerprint vibrational spectra for the following species when chemisorbed on metal catalyst surfaces: ethylidene and ethylene bound in a metallacyclopropane mode. The formation and fragmentation of diosmacyclobutanes have been shown to involve slippage of the outgoing olefin onto a single osmium, and associative exchange of the olefin from that site. The incorporation of vinylcyclopropane without rearrangement has confirmed the absence of a diradical intermediate. The anomalous stability of the diosmacyclobutane derived from trans-2-butene has proven due to greater destabilization (by the substituent methyls) of the slipped intermediate than of the ground state. Reaction of an osmacyclobutane with 1,3- or 1,2-dienes (allenes) gives 1,2 rather than 1,4 addition to the diosmium unit. Treatment of Os(CO){sub 4}(C{sub 2}H{sub 4}) with triflic acid results in the formation of Os(CO){sub 4}(C{sub 2}H{sub 5})OTf. The authors have found that the reaction of an aryl iodine(III) reagent with propargyl stannanes or silanes results in o-iodo propargyl arenes.