A statistics-based model is being developed to predict the laser-damage-limited lifetime of UV optical components on the NIF laser. In order to provide data for the model, laser damage experiments were performed on the Beamlet laser system at LLNL. An early prototype NIF focus lens was exposed to twenty 35 1 nm pulses at an average fluence of 5 J/cm{sup 2}, 3ns. Using a high resolution optic inspection system a total of 353 damage sites was detected within the 1160 cm{sup 2} beam aperture. Through inspections of the lens before, after and, in some cases, during the campaign, pulse to pulse damage growth rates were measured for damage initiating both on the surface and at bulk inclusions. Growth rates as high as 79 {micro}m/pulse (surface diameter) were observed for damage initiating at pre-existing scratches in the surface. For most damage sites on the optic, both surface and bulk, the damage growth rate was approximately l0{micro}m/pulse. The lens was also used in Beamlet for a subsequent 1053 {micro}m/526 {micro}m campaign. The 352 {micro}m-initiated damage continued to grow during that campaign although at generally lower growth rate.

A training program conducted in Bartlesville by BDM-Oklahoma technical staff, which included geologists, geophysicists, exploration and drilling specialists, and environmental policy experts. The proposed training schedule offered four courses per year and included those coursed identified by the tribes in the survey. The training program was outlined for members of Native American Tribes whose lands have oil and gas resources. The proposed program contributed to meeting the goals of the U.S. Department of Energy's (DOE) Domestic Oil and Gas Initiative to help Native American tribes become more self-sufficient in developing and managing their resources through training in cost-effective, improved technologies for hydrocarbon production that will meet environmental regulations. The training program outlined was for adult tribal representatives who are responsible for managing tribal mineral holdings or setting policy, or who work in the oil and gas industry. The course content is in response to a survey that was developed by BDM-Oklahoma and sent in the Spring of 1995 to 26 tribal agencies identified through previous contact with DOE. Tribes were asked to indicate course content needs, levels, preferred time of year, and location. Six tribes responded with specific recommendations and needs. These tribes, were the Creek, Pueblo, Cherokee, St. Regis …

The development of voltage and current probes for measuring an electron beam's current and position associated with several microsecond-long pulses from advanced Linear Induction Accelerators requires a precision pulser that can deliver both high voltages and high currents to a diagnostics Test Line. Seven-stage, type-E PFNs have been utilized in both a transformer and 4-stage Marx (plus/minus) configuration. The resulting 50-ohm pulser delivers to the Test Line a repeatable 100 kV, ca. 2 {micro}s flat-top ({+-} 1%), 2.5 {micro}s FWHM pulse with a rise time of 175 ns and 500 ns for the transformer and Marx options, respectively. Methods of reducing the rise time for both options are discussed and modeled. The coaxial Test Line is insulated at up to two atmospheres with SF{sub 6} and includes two transition regions to hold and test different diameter beam current and position monitors (BPMs). The center conductor incorporates both translation and tip/tilt with an accuracy of 100 {micro}m. Finally, the line is terminated in a matched radial resistor that provides a planar region at fields up to 40 kV/cm for the testing of voltage probes. Both the transformer and Marx options are modeled and compared to experimental results.

None

Sampling analysis plans (SAP) are a recognized manner of providing applicable requirements for conducting media sampling and analysis in a manner consistent with prescirbed objectives. This SAP has been prepared to satisfy the data quality objectives listed in this SAP with respect to the operation of the 183 KE potable water for K Area.

This document provides an evaluation and recommendations for radiological workplace air monitoring and response to ventilation failure for the Critical Mass Laboratory, 209-E Building. The Critical Mass Laboratory, part of the 209-E Building, was designed to provide a heavily shielded room where plutonium and uranium liquid solutions could be brought into various critical configurations under readily controlled and monitored conditions. The facility is contained within a one-story L-shaped concrete block and reinforced concrete building. One wing houses offices, a control room, shops, and a common area while the other wing includes an equipment room, the change room, work areas, and the two-story Critical Assembly Room (CAR). Three of the rooms contain radiologically contaminated equipment and materials.

This is the 300-area liquid effluent facilities computer software configuration management plan.

Quality Process Plan for the Restart of Cell Hot-Work. Addition of Table 4.

Quality Process Plan for the Restart of Cell Hot-Work. Addition of Table 5a.

Applied technology legend removed per DOE/HQ on April 3, 2002

The purpose of the drawing field verification work plan is to provide reliable drawings for the 310 Treated Effluent Disposal Facility (TEDF) and 340 Waste Handling Facility (340 Facility). The initial scope of this work plan is to provide field verified and updated versions of all the 340 Facility essential drawings. This plan can also be used for field verification of any other drawings that the facility management directs to be so updated. Any drawings revised by this work plan will be issued in an AutoCAD format.

This document provides an overview of both the present status of the 340 Complex (within Hanford`s 300 Area), and of tasks associated with the deactivation of segments associated with radioactive, mixed liquid waste receipt, storage, and shipping. The plan also describes activities that will allow portions of the 340 Complex to remain in service.

A soil-gas survey was conducted near the 382 Pump House in the 300 Area of the Hanford Site. The objective of the soil-gas survey was to characterize the extent of petroleum product contamination in the soil beneath the 382-1 underground gasoline storage tank excavation. The tank was discovered to have leaked when it was removed in September 1992. The results of this soil-gas survey indicate petroleum products released from the 382-1 tank are probably contained in a localized region of soil directly beneath the tank excavation site. The soil-gas data combined with earlier tests of groundwater from a nearby downgradient monitoring well suggest the spilled petroleum hydrocarbons have not penetrated the soil profile to the water table.

It is believed that a good bet for finding the Quark-Gluon Plasma at AGS energies is with the heaviest projectiles on the heaviest target, i.e. Au on Au. One of the likely signatures of the plasma is strangeness enhancement. Al Saulys has shown what it's like to find {Delta} and K{degree} with Si projectiles. Our Monte Carlo simulations show track densities 4 times higher for Au projectiles. In addition, the Au beam itself produces 30 times more ionization. Thus the present TPC's will be limited to only a few hundred ions per sec. This paper discusses plans for these experiments and modification to TPC. 9 figs.

Radiocarbon determinations have been obtained on {gamma}-carboxyglutamic acid [Gla] and {alpha}-carboxyglycine (aminomalonate) [Am] as well as acid- and base-hydrolyzed total amino acids isolated from a series of fossil bones. As far as they are aware, Am has not been reported previously in fossil bone and neither Gla nor Am {sup 14}C values have been measured previously. Interest in Gla, an amino acid found in the non-collagen proteins osteocalcin and matrix Gla-protein (MGP), proceeds from the suggestion that it may be preferentially retained and more resistant to diagenetic contamination affecting {sup 14}C values in bones exhibiting low and trace amounts of collagen. The data do not support these suggestions. The suite of bones examined showed a general tendency for total amino acid and Gla concentrations to decrease in concert. Even for bones retaining significant amounts of collagen, Gla (and Am extracts) can yield {sup 14}C values discordant with their expected age and with {sup 14}C values obtained on total amino-acid fractions isolated from the same bone sample.

None

B and W Hanford Company have two Oak Ridge National Laboratory (ORNL) Type 4 canisters filled with cesium chloride (CsCl) originally produced at WESF (Waste Encapsulation and Storage Facility). These canisters are constructed of 304L stainless steel per drawing ORNL 970-294. Instead of removing the CsCl from the Type 4 canisters and repacking into an Inner Capsule, it is intended (for ALARA, schedule and cost purposes) that the Type 4 canisters be decontaminated (scrubbed) and placed [whole] inside a Type ``W`` overpack. The overpack is constructed from 316L stainless steel. Several tests have been run by Pacific Northwest National Laboratory (PNNL) over the. years documenting the corrosion compatibility of 316L SS with CsCl (Bryan 1989 and Fullam 1972). However, no information for 304L SS compatibility is readily available. This document estimates the corrosion resistance of 304L stainless steel in a WESF CsCl environment as it compares with that of 316L stainless steel.

A three-dimensional arbitrary Lagrange-Eulerian (ALE) code is being developed for use as a general purpose tool for metal forming analyses. The focus of the effort is on the processes of forging, extrusion, casting and rolling. The ALE approach was chosen as an efficient way to deal with the large deformations and complicated flows associated with these processes. A prototype version of the software package, ALE3D, exists and is being applied to the enumerated processes. It is a finite element code which treats fluid and elastic-plastic response on an unstructured mesh. The prototype version includes heat transfer and the option of either implicit or explicit time integration of the dynamic equations. The status of the code is described. Several examples of application of the code to typical forming simulations are presented with discussions of the advantages and disadvantages of the ALE approach.

I am pleased to speak at the Fortieth Gordon Conference on Nuclear Chemistry. I served as Chairman of the first Gordon Conference on Nuclear Chemistry held June 23--27, 1952, at New Hampton, New Hampshire. In my remarks, during which I shall quote from my journal, I shall describe some of the background leading up to the first Gordon Conference on Nuclear Chemistry and my attendance at the first seven Gordon Conferences during the period 1952 through 1958. I shall also quote my description of my appearance as the featured speaker at the Silver Anniversary of the Gordon Research Conferences on December 27, 1956 held at the Commodore Hotel in New York City. I shall begin with reference to my participation in the predecessor to the Gordon Conferences, the Gibson Island Research Conferences 45 years ago, on Thursday, June 20, 1946, as a speaker. This was 15 years after the start of these conferences in 1931. Neil Gordon played a leading role in these conferences, which were named (in 1948) in his honor -- the Gordon Research Conferences -- soon after they were moved to Colby Junior College, New London, New Hampshire in 1947. W. George Parks became Director in 1947, …

None

The purpose of this report is to present test data recorded during acceptance testing of the Mobile Color Camera System (MCCS).

The design of the active source for active and passive computed tomography (A&PCT) is critical with respect to accuracy and throughput. The A&PCT active source requirements are highly dependent upon the attenuation properties of the waste matrix within the drum. On of the most highly attenuating waste matrices is sludge. This waste stream will consist of solidified aqueous waste consisting of IDC 001 first stage sludge and IDC 007 wet sludge. Also, the stream consists of solidified organic waste known as code IDC 003 organic setups. We have evaluated the sludge drum data that was previously acquired on the WIT system and have determined that the active source activity must be increased to provide reasonable throughput. The sludge drum that is evaluated here is drum CEPRF11. CEPRF11 is a test drum that was part of the Nondestructive Assay system Capability Evaluation Project (CEP) and contained an actual Rocky Flats waste that is categorized as code 003 solidified organic waste. The full drum was evaluated and found to be somewhat homogenous; therefore, a single slice is arbitrarily chosen to represent the entire drum. Slice number 8 is used and is located approximately at the center of the drum. Figure 1 shows …

High resolution spectroscopy experiments with visible adaptive optics (AO) telescopes at Starfire Optical Range and Mt. Wilson have demonstrated that spectral resolution can be routinely improved by a factor of - 10 over the seeing-limited case with no extra light losses at visible wavelengths. With large CCDs now available, a very wide wavelength range can be covered in a single exposure. In the near future, most large ground-based telescopes will be equipped with powerful A0 systems. Most of these systems are aimed primarily at diffraction-limited operation in the near IR. An exciting new opportunity will thus open up for high resolution IR spectroscopy. Immersion echelle gratings with much coarser grooves being developed by us at LLNL will play a critical role in achieving high spectral resolution with a compact and low cost IR cryogenically cooled spectrograph and simultaneous large wavelength coverage on relatively small IR detectors. We have constructed a new A0 optimized spectrograph at Steward Observatory to provide R = 200,000 in the optical, which is being commissioned at the Starfire Optical Range 3.5m telescope. We have completed the optical design of the LLNL IR Immersion Spectrograph (LISPEC) to take advantage of improved silicon etching technology. Key words: adaptive …

This paper shows an analysis of the applicability of an adsorption system for electric vehicle (EV) air conditioning. Adsorption systems are designed and optimized to provide the required cooling for four combinations of vehicle characteristics and driving cycles. The resulting adsorption systems are compared with vapor compression air conditioners that can satisfy the cooling load. The objective function is the overall system weight, which includes the cooling system weight and the weight of the battery necessary to provide energy for air conditioner operation. The system with the minimum overall weight is considered to be the best, because a lower weight results in an increased vehicle range. The results indicate that, for the conditions analyzed in this paper, vapor compression air conditioners are superior to adsorption systems not only because they are lighter, but also because they have a higher COP and are more compact.