The baseline risk assessment [WSRC91] has demonstrated that the hazard at PAR Pond is solely from external exposure to Cs-137, a gamma emitting radionuclide. Between 1954 and 1964, approximately 222 curies of radioactive cesium (Cs-134 and Cs-137) were released to the Lower Three Runs Creek system from R Reactor [Ma9l]. These releases were associated with leaking fuel and target slugs in the reactor disassembly basin. Independent studies show that approximately 45 curies of Cs-137 (half-life of 30 years) still resides in the sediments of PAR Pond [Wh9l; Wi9l]; Cs-134 has a relatively short half-life (2 years) and has decayed to insignificant quantities since it was released.

The baseline risk assessment [WSRC91] has demonstrated that the hazard at PAR Pond is solely from external exposure to Cs-137, a gamma emitting radionuclide. Between 1954 and 1964, approximately 222 curies of radioactive cesium (Cs-134 and Cs-137) were released to the Lower Three Runs Creek system from R Reactor [Ma9l]. These releases were associated with leaking fuel and target slugs in the reactor disassembly basin. Independent studies show that approximately 45 curies of Cs-137 (half-life of 30 years) still resides in the sediments of PAR Pond [Wh9l; Wi9l]; Cs-134 has a relatively short half-life (2 years) and has decayed to insignificant quantities since it was released.

Ball lenses are important for many applications. For example, ball lenses can be used to match the mode of a laser diode (LD) to a single mode fiber (SMF), essential for low-loss, high bit rate communication systems. Modeling the propagation of LD light through a ball lens presents a challenge due to the large angular divergence of the LD field (typically > 20{degrees} HWHM) and the subsequent significant effect of spherical aberration. Accurately calculating the reflected power is also difficult, but essential, since reflections as small as {minus}30 dB can destabilize the LID. A full-wave analysis of this system using, e.g., a finite-difference time-domain method is not practical because of the size of the ball lens, typically hundreds of wavelengths in diameter. Approximate scalar methods can give good results in some cases, but fail to calculate reflected power and miss polarization effects entirely. The authors` approach exploits the fact that the scattering of an arbitrary electromagnetic beam from a sphere is an exactly solvable problem. The scattering of a plane wave from a sphere is a classical problem which was solved by Mie in 1908. More recently, various workers have considered the scattering of a Gaussian beam from a sphere …

The authors investigated the decomposition of HMX or PBX-9404 as a 25% solution in DMSO by treatment with aqueous base solutions. They investigated investigated two concentrations of NaOH solutions, 40% NaOH and 2N NaOH. {sup 1}H-nmr spectroscopy was chosen to follow the decomposition by {sup 1}H-nmr spectroscopy, watching the disappearance of the -CH{sub 2}-absorbance of HMX at 6.2 ppm. The 40% NaOH solution is initially immiscible with the DMSO solution but becomes miscible as it reacts. The reaction is exothermic with recorded temperatures after mixing reaching 90{degrees}C. The mixture does foam somewhat but this can be controlled by slowing down the stirring speed. The 2N NaOH solution is miscible with the HMX/DMSO solution but upon mixing the HMX is precipitated by the water present in the base solution. The mixing of the solutions is much less exothermic and the decomposition is slower than the 40% NaOH solution so the mixture is heated at 60{degrees}C for 1h to facilitate the decomposition.

The objective of the research is a further development of the engineering concept of seismic isolation. Neglecting the transient stage of seismic loading results in a widespread misjudgement: The force of resistance associated with velocity is mostly conceived as a source of damping vibrations, though it is an active force at the same time, during an earthquake type excitation. For very pliant systems such as base isolated structures with relatively low bearing stiffness and with artificially added heavy damping mechanism, the so called `damping`` force may occur even the main pushing force at an earthquake. Thus, one of the two basic pillars of the common seismic isolation philosophy, namely, the doctrine of usefulness and necessity of a strong damping mechanism, is turning out to be a self-deception, sometimes even jeopardizing the safety of structures and discrediting the very idea of seismic isolation. There is a way out: breaking with damping dependancy.

This BCR compares the Project W-058 Functional Design Criteria with the Project W-058 Preliminary Design Requirements Document,and identifies the differences between the two documents in the mission definition, project requirements, system functions, and interfaces. Impacts these differences have on current project design are also discussed.

When users refer to Motif, they are usually talking about mwm, the window manager. However, when programmers mention Motif they are usually discussing the programming toolkit. This toolkit is used to develop new or modify existing applications. In this presentation, the term Motif will refer to the toolkit. Motif comes with a number of features that help users effectively use the applications built with it. The term look and feel may be overused; nonetheless, a consistent and well designed look and feel assists the user in Teaming and using new applications. The term point and click generally refers to using a mouse to select program commands. While Motif supports point and click, the toolkit also supports using the keyboard as a substitute for many operations. This gives a good typist a distinct advantage when using a familiar application. We will give an overview of the toolkit, touching on the user interface features and general programming considerations. Since the source code for many useful Motif programs is readily available, we will explain how to get these sources and touch on derived benefits. We win also point to other sources of on-line help and documentation. Finally, we will present some practical experiences …

When users refer to Motif, they are usually talking about mwm, the window manager. However, when programmers mention Motif they are usually discussing the programming toolkit. This toolkit is used to develop new or modify existing applications. In this presentation, the term Motif will refer to the toolkit. Motif comes with a number of features that help users effectively use the applications built with it. The term look and feel may be overused; nonetheless, a consistent and well designed look and feel assists the user in Teaming and using new applications. The term point and click generally refers to using a mouse to select program commands. While Motif supports point and click, the toolkit also supports using the keyboard as a substitute for many operations. This gives a good typist a distinct advantage when using a familiar application. We will give an overview of the toolkit, touching on the user interface features and general programming considerations. Since the source code for many useful Motif programs is readily available, we will explain how to get these sources and touch on derived benefits. We win also point to other sources of on-line help and documentation. Finally, we will present some practical experiences …

A letter report issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO assessed the Army's implementation of the Land Warrior system, focusing on: (1) the status of the system; (2) whether the level of monitoring and oversight is sufficient based on projected Land Warrior development costs; (3) how the Army is ensuring that Land Warrior will be able to operate with other digitized battlefield systems; and (4) whether technical and human factor problems still need resolution."

A collective Thomson scattering (CTS) diagnostic system for localized measurement of energetic ions is being developed for TFTR. This system will use a 200KW, 56GHz gyrotron and a sensitive heterodyne receiver. In addition, a key element of this system will be beam and viewing dumps which are needed to minimize detection of stray gyrotron and ECE background radiation by the receiver system. It is the purpose of this study to determine the size and location of these dumps inside TFTR taking into account beam refraction and launch and receiver antenna optics scanning. The beam dump must cover all the area in the vacuum chamber where the beam is expected to impinge, and the viewing dump must cover all the areas within the direct line of sight of the receiver antenna. The beam launch system and the receiver antenna are to be placed nearly symmetrically above and below the midplane of the tokamak vacuum vessel, respectively. The beam dump is to be placed at the bottom inside of the vacuum vessel to absorb the gyrotron beam which will be launched from a top port. The viewing dump is expected to be placed symmetrically at the top inside of the vacuum vessel, …

This report talks about The Beam Lifetime and Emittance Growth in RHIC under Normal Operating Conditions and with a Hydrogen Gas Jet

This note is a reference manual for the B-Factory Event Generator (BEGET V21) software package which generates physics events relevant to B-Factory detector studies. The package provides a standard framework that can easily interface to various external generators and simulation applications. Version 21 of BEGET contains a number of physics and background generators and is interfaced to the JETSET and KORALB generators and the GEANT and ASLUND simulation programs.

It is difficult to accurately predict actinide behavior during the alkaline leaching of Hanford's radioactive sludges due to the diverse chemical and radiolytic conditions existing in these wastes. The results of Pu dissolution during experimental washing of sludge simulants from the BiPO{sub 4} Redox, and PUREX processes shows that {le} 2.l% Pu is dissolved during contact with alkaline media, but up to 65.5% Pu may be dissolved in acidic media. The dissolution of Cr, Fe, Nd, and Mn has also been observed, and the results of solid state, radioanalytical, and spectroscopic investigations are detailed.

The high-severity co-processing long-term operability test and the detailed product analyses from the operability test have been completed. Operational data and detailed product analyses have been used to characterize the high-severity co-processing operation. Using the process characterizations, yield estimate for a commercial-sized high-severity co-processing unit has been performed using operational data and detailed product analysis from the long-term operability study. The estimate is based on a co-processing unit processing the vacuum resid from 50,000 barrels per day (BPD) of Lloydminster crude and also processing 2,400 metric tons per day (MT/day) of Illinois No. 6 coal. The feedstock characteristics for the yield estimate are summarized in Table 1.

The existing Los Alamos National Laboratory TA-50 liquid radioactive waste treatment plant RLWP has been in service for over thirty years, during this period many technical, regulatory, and processing changes have occurred. The existing facility can no longer comply with the demands and requirements for continued operation, and would not be able to comply with anticipated stringent future contaminant discharge limitations. Either a major upgrading or replacement of the existing facility is required. In order to assess the most appropriate means of providing an adequate facility to comply with predicted requirements for Ta-50, this Best Available Technology (BAT) Study was conducted to compare feasible technical and economic alternatives in order to define the most favorable technology configuration. This report consists of eleven sections. Section 1 provides a general introduction and background of the TA-50 operations and the basis for this study. Section 2 provides a technical discussion of the unit processes at TA-50 and several other comparable operations at other DOE sites. Section 3 addresses the evaluation and selection of appropriate treatment processes. Section 4 provides an analysis of environmental issues and concerns. Section 5 presents the rationale for the selection of preferred process configurations. Section 6 is the evaluation …

Periodic paper series discussing information about occupational training, labor markets, and related information in Texas.

The present invention is a bi-stable optical actuator device that is depowered in both stable positions. A bearing is used to transfer motion and smoothly transition from one state to another. The optical actuator device may be maintained in a stable position either by gravity or a restraining device.

Biennial report of the Texas Council on Offenders with Mental Impairments describing the group's goals and activities regarding programs and needs for mentally impaired criminal offenders. It includes a strategic plan through 1998.

Biennial report of the Texas Council on Offenders with Mental Impairments describing the group's goals and activities regarding programs and needs for mentally impaired criminal offenders.

The proposed research project consists of an integrated, two-stage fermentation and a highly energy-efficient product separation scheme. In the first fermentation, Butyribacterium methylotrophicum converts carbon monoxide (CO) into butyric acid and acetic acids which are then converted into butanol, ethanol, and a small amount of acetone in the second stage fermentation by Clostridium acetobutylicum. An advanced separation system process, based on pervaporation, removes the alcohols from the fermentation broth as they are formed, along with some of the hydrogen sulfide (H{sub 2}S), to minimize possible inhibition of the fermentations. This bioconversion process offers a critical advantage over conventional, catalytic processes for synthesis gas conversion: the microorganisms are several orders of magnitude more sulfur tolerant than metallic catalysts. The catalysts require sulfur removal to the parts per million level, while the microorganisms are unaffected by H{sub 2}S and carbonyl sulfide (COS) at one part per hundred--roughly the composition of sulfur in raw synthesis gas. During the two-year course of this project, the following major objectives have been accomplished: demonstrated long-term cell recycle of continuous fermentation of synthesis gas; demonstrated cell immobilization of Butyribacterium methylotrophicum; identified trickle-bed reactor as a viable alternative fermentation method; modulated metabolic pathways to increase C4 formation during …

The overall objective of the project is to develop an integrated two-stage fermentation process for conversion of coal-derived synthesis gas to a mixture of alcohols. This is achieved in two steps. In the first steps, Butyribacterium methylotrophicum converts carbon monoxide (CO) to butyric and acetic acids. Subsequent fermentation of the acids by Clostridium acetobutylicum leads to the production of butanol and ethanol.

This report discusses treaty on biodiversity, issues, history and current status.

Several molecular and cellular markers of genotoxicity were adapted for measurement in the Medaka (Oryzias latipes), and were used to describe the effects of treatment of the organism with diethylnitrosamine (DEN). NO{sup 6}-ethyl guanine adducts were detected, and a slight statistically significant, increase in DNA strand breaks was observed. These results are consistent with the hypothesis that prolonged exposure to high levels of DEN induced alkyltransferase activity which enzymatically removes any O{sup 6}-ethyl guanine adducts but does not result in strand breaks or hypomethylation of the DNA such as might be expected from excision repair of chemically modified DNA. Following a five week continuous DEN exposure with 100 percent renewal of DEN-water every third day, the F values (DNA double strandedness) increased considerably and to similar extent in fish exposed to 25, 50, and 100 ppM DEN. This has been observed also in medaka exposed to BaP.

Several molecular and cellular markers of genotoxicity were adapted for measurement in the Medaka (Oryzias latipes), and were used to describe the effects of treatment of the organism with diethylnitrosamine (DEN). NO{sup 6}-ethyl guanine adducts were detected, and a slight statistically significant, increase in DNA strand breaks was observed. These results are consistent with the hypothesis that prolonged exposure to high levels of DEN induced alkyltransferase activity which enzymatically removes any O{sup 6}-ethyl guanine adducts but does not result in strand breaks or hypomethylation of the DNA such as might be expected from excision repair of chemically modified DNA. Following a five week continuous DEN exposure with 100 percent renewal of DEN-water every third day, the F values (DNA double strandedness) increased considerably and to similar extent in fish exposed to 25, 50, and 100 ppM DEN. This has been observed also in medaka exposed to BaP.