Waste Receiving and Processing Module 2A waste certification strategy (open access)

Waste Receiving and Processing Module 2A waste certification strategy

This document addresses the certification of Mixed Low Level Waste (MLLW) that will be treated in the Waste Receiving and Processing Facility Module 2A (WRAP 2A) and is destined for disposal in the MLLW trench of the Low Level Burial Grounds (LLBG). The MLLW that will be treated in WRAP 2A contains land disposal restricted and radioactive constituents. Certification of the treated waste is dependent on numerous waste management activities conducted throughout the WRAP 2A operation. These activities range from waste treatability testing conducted prior to WRAP 2A waste acceptance to overchecking final waste form quality prior to transferring waste to disposal. This document addresses the high level strategies and methodologies for certifying the final waste form. Integration among all design and verification activities that support final waste form quality assurance is also discussed. The information generated from this effort may directly support other ongoing activities including the WRAP 2A Waste Characterization Study, WRAP 2A Waste Analysis Plan development, Sample Plan development, and the WRAP 2A Data Management System functional requirements definition.
Date: October 12, 1994
Creator: LeClair, M. D.; Pottmeyer, J. A. & Hyre, R. A.
Object Type: Report
System: The UNT Digital Library
Computer system requirements specification for 101-SY hydrogen mitigation test project data acquisition and control system (DACS-1) (open access)

Computer system requirements specification for 101-SY hydrogen mitigation test project data acquisition and control system (DACS-1)

The system requirements specification for SY-101 hydrogen mitigation test project (HMTP) data acquisition and control system (DACS-1) documents the system requirements for the DACS-1 project. The purpose of the DACS is to provide data acquisition and control capabilities for the hydrogen mitigation testing of Tank SY-101. Mitigation testing uses a pump immersed in the waste, directed at varying angles and operated at different speeds and time durations. Tank and supporting instrumentation is brought into the DACS to monitor the status of the tank and to provide information on the effectiveness of the mitigation test. Instrumentation is also provided for closed loop control of the pump operation. DACS is also capable for being expanded to control and monitor other mitigation testing. The intended audience for the computer system requirements specification includes the SY-101 hydrogen mitigation test data acquisition and control system designers: analysts, programmers, instrument engineers, operators, maintainers. It is intended for the data users: tank farm operations, mitigation test engineers, the Test Review Group (TRG), data management support staff, data analysis, Hanford data stewards, and external reviewers.
Date: October 12, 1994
Creator: McNeece, S. G. & Truitt, R. W.
Object Type: Report
System: The UNT Digital Library
Nitrogen and carbon oxides chemistry in the HRS retorting process (open access)

Nitrogen and carbon oxides chemistry in the HRS retorting process

The HRS Oil Shale Retort process consists of a pyrolysis section which converts kerogen of the shale to liquid and gaseous products, and a combustion section which burns residual carbon on the shale to heat the process. Average gas concentrations of selected gas phase species were determined from data measured at several placed on the combustion system of the Lawrence Livermore National Laboratory Hot-Recycled-Solids Retort Pilot Plant for representative rich and lean shale runs. The data was measured on-line and in real time by on-line meters (CO{sub 2}, CO, O{sub 2}), mass spectrometry (CO{sub 2}, O{sub 2}, H{sub 2}O, NO, CH{sub 4}, SO{sub 2}, N{sub 2} and Ar), and Fourier transform infrared spectroscopy (CO{sub 2}, CO, H{sub 2}O, NO, N{sub 2}O, NO{sub 2}, CH{sub 4}, SO{sub 2}, NH{sub 3}, and HCN). For both the rich and leans shale runs, the Lift-Pipe Combustor (LFT) exhibited gas concentrations (sampled at the exit of the LFT) indicative of incomplete combustion and oxidation; the Delayed-Fall Combustor (DFC) exhibited gas concentrations (sampled at the annulus and the exit of the DFC) indicative of much more complete combustion and oxidation. The Fluidized-Bed Combustor exhibited gas concentrations which were controlled to a large extent by the injection …
Date: November 12, 1993
Creator: Reynolds, J. G.
Object Type: Report
System: The UNT Digital Library
NCSU PULSTAR Reactor instrumentation upgrade (open access)

NCSU PULSTAR Reactor instrumentation upgrade

The Nuclear Reactor Program at North Carolina State University initiated an upgrade program at the NCSU PULSTAR Reactor in 1990. Twenty-year-old instrumentation is currently undergoing replacement with solid-state and current technology equipment. The financial assistance from the United States Department of Energy has been the primary source of support. This interim report provides the status of the first two phases of the upgrade program.
Date: August 12, 1993
Creator: Perez, P. B. & Bilyj, S. J.
Object Type: Report
System: The UNT Digital Library
Winter Fuels Report: Week Ending November 5, 1993 (open access)

Winter Fuels Report: Week Ending November 5, 1993

The Winter Fuels Report is intended to provide concise, timely information to the industry, the press, policymakers, consumers, analysts, and State and local governments on the following topics: Distillate fuel oil net production, imports and stocks on a US level and for all Petroleum Administration for Defense Districts (PADD) and product supplied on a US level; propane net production, imports and stocks on a US level and for PADD`s I, II, and III; natural gas supply and disposition and underground storage for the US and consumption for all PADD`S; as well as selected National average prices; residential and wholesale pricing data for heating oil and propane for those States participating in the joint Energy Information Administration (EIA)/State Heating Oil and Propane Program; crude oil and petroleum price comparisons for the US and selected cities; and a 6--10 Day, 30-Day, and 90-Day outlook for temperature and precipitation and US total heating degree-days by city.
Date: November 12, 1993
Creator: unknown
Object Type: Report
System: The UNT Digital Library
A Helical Magnet Design for RHIC (open access)

A Helical Magnet Design for RHIC

Helical dipole magnets are required in a project for the Relativistic Heavy Ion Collider (RHIC) to control and preserve the beam polarization in order to allow the collision of polarized proton beams. Specifications are for low current superconducting magnets with a 100 mm coil aperture and a 4 Tesla field in which the field rotates 360 degrees over a distance of 2.4 meters. A magnet meeting the requirements has been developed that uses a small diameter cable wound into helical grooves machined into a thick-walled aluminum cylinder.
Date: May 12, 1997
Creator: Willen, E.; Gupta, R.; Jain, A.; Kelly, E.; Morgan, G.; Muratore, J. et al.
Object Type: Article
System: The UNT Digital Library
Small Commercial Program DOE Project: Impact evaluation (open access)

Small Commercial Program DOE Project: Impact evaluation

In 1991, Washington Electric Cooperative (WEC) implemented a Department of Energy grant to conduct a small commercial energy conservation project. The small commercial Mom, and Pop'' grocery stores within WEC's service territory were selected as the target market for the project. Energy Solid Waste Consultant's (E SWC) Impact Evaluation is documented here. The evaluation was based on data gathered from a variety of sources, including load profile metering, kWh submeters, elapsed time indicators, and billing histories. Five stores were selected to receive measures under this program: Waits River General Store, Joe's Pond Store, Hastings Store, Walden General Store, and Adamant Cooperative. Specific measures installed in each store and description of each are included.
Date: August 12, 1992
Creator: Bathgate, R. & Faust, S. (Energy and Solid Waste Consultants, Montpelier, VT (United States))
Object Type: Report
System: The UNT Digital Library
Wideband beam patterns from sparse arrays (open access)

Wideband beam patterns from sparse arrays

Transient radiated fields due to impulsively excited apertures and aperture response due to incident impulsive waves has been the subject of considerable research in acoustics over the last decade. This research is also of importance to wideband radar. Medical ultrasound steered phased arrays use transmitted pulses consisting of from 1 to 3 cycles of a damped sinusoid, which is similar to certain radar systems. As will be shown, planar arrays using ultra-wide band pulses may be formed with very sparsely spaced elements. This makes feasible very high resolution, economical, and relatively simple, steered beam phased arrays. The resolution may be increased simply by moving the array elements further apart. Grating lobes due to aliasing are not formed when the elements are sparsely spaced. In a very sparse wide band array, element spacing effects the form, or signal shape in time, rather than the peak amplitude of the sidelobe structure. The number of elements in the aperture determines the peak sidelobe level which, in theory, may be decreased without limit. 13 refs., 7 figs.
Date: January 12, 1990
Creator: Anderson, F. (Anderson (Forrest), Bernalillo, NM (USA)); Fullerton, L. (Time Domain Systems, Huntsville, AL (USA)); Christensen, W. & Kortegaard, B. (Los Alamos National Lab., NM (USA))
Object Type: Article
System: The UNT Digital Library
Advanced Solid-state Lasers - to Ignition and Beyond (open access)

Advanced Solid-state Lasers - to Ignition and Beyond

This brochure concentrates on the diode-pumped solid-state laser. Surrounding it on the cover are some of the primary technological developments that make it a candidate for the means by which inertial confinement fusion will create inertial fusion energy as an inexhaustible source of electric power.
Date: June 12, 1998
Creator: Marshall, C.; Bibeau, C.; Orth, C.; Meier, W. R.; Payne, S. & Sutton, S.
Object Type: Report
System: The UNT Digital Library
Texas Disease Prevention News, Volume 57, Number 10, May 1997 (open access)

Texas Disease Prevention News, Volume 57, Number 10, May 1997

Newsletter of the Texas Department of Health discussing the news, activities, and events of the organization and other information related to health in Texas.
Date: May 12, 1997
Creator: Texas. Department of Health.
Object Type: Journal/Magazine/Newsletter
System: The Portal to Texas History
Mass storage for microprocessor farms (open access)

Mass storage for microprocessor farms

Experiments in high energy physics require high density and high speed mass storage. Mass storage is needed for data logging during the online data acquisition, data retrieval and storage during the event reconstruction and data manipulation during the physics analysis. This paper examines the storage and speed requirements at the first two stages of the experiments and suggests a possible starting point to deal with the problem. 3 refs., 3 figs.
Date: January 12, 1990
Creator: Areti, H.
Object Type: Report
System: The UNT Digital Library
Characterization of embryo-specific genes (open access)

Characterization of embryo-specific genes

The objective of the proposed research is to characterize the function and regulation of a set of embryonic genes which are expressed in the embryos, not in the plants. 22 cDNA clones were isolated from a cDNA library we constructed using mRNAS of -carrot somatic embryos. These cDNA clones identified mRNA species that are present in the somatic and zygotic embryos, but not in adult plants. The sequence of all 22cDNA clones were determined; genomic clones for three cDNA clones, DC8, DC59, and DC49 were isolated and gene sequences determined. DC8, DC49, and several other genes identified by the cDNA sequences belong to the category of late embryogenesis abundant protein genes, Lea. The function of these gens have not yet been determined, but they share common structural features, are regulated by ABA and are speculated to play a role in seed desiccation.
Date: June 12, 1992
Creator: Sung, R.
Object Type: Report
System: The UNT Digital Library
TMAP4 User's Manual (open access)

TMAP4 User's Manual

The Tritium Migration Analysis Program, Version 4 (TMAP4) has been developed by the Fusion Safety Program at the Idaho National Engineering Laboratory (INEL) as a safety analysis code, mainly to analyze tritium retention and loss in fusion reactor structures and systems during normal operation and accident conditions. TMAP4 incorporates one-dimensional thermal- and mass-diffusive transport and trapping calculations through structures and zero dimensional fluid transport between enclosures and across the interface between enclosures and structures. A key feature is the ability to input problem definition parameters as constants, interpolation tables, or FORTRAN equations. The code is specifically intended for use under a DOS operating system on PC-type mini-computers, but it has also been run successfully on workstations and mainframe computer systems. Use of the equation-input feature requires access to a FORTRAN-77 compiler and a linker program.
Date: June 12, 1992
Creator: Longhurst, G. R.; Holland, D. F.; Jones, J. L. & Merrill, B. J.
Object Type: Report
System: The UNT Digital Library
Texas Pecan Pest Management Newsletter, Volume 94, Number 2, April 1994 (open access)

Texas Pecan Pest Management Newsletter, Volume 94, Number 2, April 1994

Newsletter focusing on pecan disease and pest control in Texas, including prevention, identification, treatment, and educational opportunities.
Date: April 12, 1994
Creator: Texas Agricultural Extension Service
Object Type: Journal/Magazine/Newsletter
System: The Portal to Texas History
Texas Pecan Pest Management Newsletter, Volume 93, Number 4, May 1993 (open access)

Texas Pecan Pest Management Newsletter, Volume 93, Number 4, May 1993

Newsletter focusing on pecan disease and pest control in Texas, including prevention, identification, treatment, and educational opportunities.
Date: May 12, 1993
Creator: Texas Agricultural Extension Service
Object Type: Journal/Magazine/Newsletter
System: The Portal to Texas History