None

Patterning the group-IH nitrides has been challenging due to their strong bond energies and relatively inert chemical nature as compared to other compound semiconductors. Plasma etch processes have been used almost exclusively to pattern these films. The use of high-density plasma etch systems, including inductively coupled plasmas (ICP), has resulted in relatively high etch rates (often greater than 1.0 pmhnin) with anisotropic profiles and smooth etch morphologies. However, the etch mechanism is often dominated by high ion bombardment energies which can minimize etch selectivity. The use of an ICP-generated BCl~/C12 pkyma has yielded a highly versatile GaN etch process with rates ranging from 100 to 8000 A/rnin making this plasma chemistry a prime candidate for optimization of etch selectivity. In this study, we will report ICP etch rates and selectivities for GaN, AIN, and InN as a function of BCl~/Clz flow ratios, cathode rf-power, and ICP-source power. GaN:InN and GaN:AIN etch selectivities were typically less than 7:1 and showed the strongest dependence on flow ratio. This trend maybe attributed to faster GaN etch rates observed at higher concentrations of atomic Cl which was monitored using optical emission spectroscopy (OES). ~E~~~~f:~ INTRODUCTION DEC j 4898 Etch selectivi

This document describes and analyzes the technical requirements that the Tank Waste Remediation System (TWRS) must satisfy for the mission. This document further defines the technical requirements that TWRS must satisfy to supply feed to the private contractors` facilities and to store or dispose the immobilized waste following processing in these facilities. This document uses a two phased approach to the analysis to reflect the two-phased nature of the mission.

In May 1985, a National Pollutant Discharge Elimination System (NPDES) permit was issued for the Oak Ridge Y-12 Plant. As a condition of the permit, a Biological Monitoring and Abatement Program (BMAP) was developed to demonstrate that the effluent limitations established for the Y-12 Plant protect the classified uses of the receiving stream (East Fork Poplar Creek; EFPC), in particular, the growth and propagation of aquatic life (Lear et al. 1989). A second objective of the BMAP is to document the ecological effects resulting from the implementation of a water pollution control program designed to eliminate direct discharges of wastewaters to EFPC and to minimize the inadvertent release of pollutants to the environment. Because of the complex nature of the discharges to EFPC and the temporal and spatial variability in the composition of the discharges, a comprehensive, integrated approach to biological monitoring was developed. A new permit was issued to the Y-12 Plant on April 28, 1995 and became effective on July 1, 1995. Biological monitoring continues to be required under the new permit. The BMAP consists of four major tasks that reflect different but complementary approaches to evaluating the effects of the Y-12 Plant discharges on the aquatic integrity …

Sandia National Laboratories is developing a new form of flexural plate wave device (FPW) for sensor applications. In this device, Lorentz forces cause out of plane vibrations in a silicon nitride membrane. Current induced in transducer lines on the membrane provides information about the amplitude and phase of these surface vibrations. By tracking the large amplitude vibrations that occur at resonant frequencies, it is possible to infer information about loading on the membrane. In fabricating FPWs, it is important to understand the impact that minor defects can have on operation. Through modeling and testing, they are developing resilient designs that provide large amplitude signals with a high tolerance to defects. A finite element model has been developed to perform design trade-off studies, and results from the model are being verified with a unique measurement system that can image Angstrom scale displacements at vibrational frequencies up to 800 kHz. Results from FPW modeling and imaging efforts are presented in this paper.

Enhanced transmission of a low intensity laser beam is observed when crossed with an identical-frequency beam in a plasma with a flow velocity near the ion sound speed. The time history of the enhancement and the dependence on the flow velocity strongly suggest that this is due to energy transfer between the beams via a resonant ion wave with zero frequency in the laboratory frame. The maximum energy transfer has been observed when the beams cross in a region with Mach 1 flow. The addition of frequency modulation on the crossing beams is seen to reduce the energy transfer by a factor of two. Implications for indirect-drive fusion schemes are discussed.

This report is on China’s Economy: Findings of a Research Trip.

We present {sup 9}Be and {sup 11}B NMR spin-lattice relaxation rate (1/T{sub 1}) measurements in UBe{sub 13-x}B{sub x} for x = 0.03 and 0.07 over the temperature range 0.096 K to 2 K. The temperature dependence of 1/T{sub 1} shows a strong B concentration dependence, especially at low temperatures. We interpret this behavior as consistent with gapless superconductivity induced by the addition of B impurities. The ratio of the {sup 9}Be to {sup 11}B 1/T{sub 1} increases with decreasing temperature below {Tc} indicating additional contributions to the {sup 9}Be relaxation rate, possibly from nuclear spin diffusion to normal-state vortex cores or paramagnetic impurities.

The fluid transfer parameters between rock matrix and fracture are not well known. Consequently, simulation of fractured reservoirs uses, in general, very crude and unproven hypotheses such as zero capillary pressure in the fracture and/or relative permeability linear with saturation. In order to improve the understanding of flow in fractured media, an experimental study was conducted and numerical simulations of the experiments were made. A laboratory flow apparatus was built to obtain data on water- air imbibition and oil-water drainage displacements in horizontal single-fractured block systems. For this purpose, two configurations have been used: a two-block system with a 1 mm spacer between the blocks, and a two-block system with no spacer. During the experiments, porosity and saturation measurements along the cores have been made utilizing an X-ray Computerized Tomography (CT) scanner. Saturation images were reconstructed in 3-D to observe matrix-fracture interactions. Differences in fluid saturations and relative permeabilities caused by changes in fracture width have also been analyzed.

This presentation provides a discussion of the expanding role of non-lethal weapons as envisioned necessary in future warfare.

General Atomics (GA) together with the University of Rochester/Laboratory for Laser Energetics (UR/LLE) and Los Alamos National Laboratory (LANL), has designed the OMEGA Cryogenic Target System. This system fills, cools, and layers DT targets and places them in the center of the OMEGA Target Chamber. All equipment was procured, assembled, and tested at GA and UR/LLE. GA along with Lawrence Livermore National Laboratory and LANL is designing a test unit to evaluate the key process parameters and design issues associated with fielding cryogenic targets on the National Ignition Facility.

We have developed an interactive computer-aided design program that supports mechanical design of devices fabricated in surface micro-machining processes. The program automates kinematic analysis via a novel configuration space computation code, performs real-time simulation, and supports functional parametric design. Designers can visualize system function under a range of operating conditions, can find and correct design flaws, and can optimize performance. We used the program to detect and correct a design flaw in a micro-mechanical indexing mechanism fabricated at Sandia with the SUMMiT process.

A review is made of the infrastructure, technology and capabilities of Sandia National Laboratories for the development of micromechanical systems. By incorporating advanced fabrication processes, such as chemical mechanical polishing, and several mechanical polysilicon levels, the range of micromechanical systems that can be fabricated in these technologies is virtually limitless. Representative applications include a micro-engine driven mirror, and a micromachined lock. Using a novel integrated MEMS/CMOS technology, a six degree-of-freedom accelerometer/gyroscope system has been designed by researchers at U.C. Berkeley and fabricated on the same silicon chip as the CMOS control circuits to produce an integrated micro-navigational unit.

A review is made of the infrastructure, technology and capabilities of Sandia National Laboratories for the development of micromechanical systems that have potential space applications. By incorporating advanced fabrication processes, such as chemical mechanical polishing, and several mechanical polysilicon levels, the range' of rrticromechanical systems that can be fabricated in these technologies is virtually limitless. Representative applications include a micro- engine driven mirror, and a micromachined lock. Using a novel integrated MEM!YCMOS technology, a six degree-of-freedom accelerometer/gyroscope system has been designed by researchers at U.C. Berkeley and fabricated on the same silicon chip as the CMOS control circuits to produce an integrated micro-navigational unit.

The NGDRS steering committee met at Unocal's offices on October 1, 1998 in Sugar Land, Texas to review and discuss issues of data transfer and the continued development of the Stapleton prospect for establishment of a national core repository. Company representatives reaffirmed their commitment to donate geoscience data to the NGDRS once appropriate facilities are available.

This report gives progress made on the following milestones: demonstrate Ti and Nb monitoring at 3M site, demonstrate Al monitoring at LLNL, complete baseline melt and vapor plume model for the metal matrix process (3M fiber coating process), prototype a laser at LLNL to monitor Cu, ZrO{sub 2} monitoring demonstration at LLNL, Se monitoring demonstration, and process scale-up study for YBCO high-temperature superconductor.

Foam is used to reduce the high mobility of gas-drive fluids and improve the contact between oil and these injected fluids. We require a better understanding of the effect of surfactant concentration on foam flow in porous media. Besides this, the literature on foam flow and transport in heterogeneous systems is sparse although the field situation is primarily heterogeneous and multidimensional. In this study, foam flow experiments were conducted first in homogeneous sand packs to investigate the effect of surfactant concentration on foam flow and then a heterogeneous experimental setup was prepared to observe heterogeneity and multidimensional flow effects on foam propagation. The homogeneous core experiments were conducted in a cylindrical aluminum core holder that was packed with a uniform Ottawa sand. Sand permeability is about 7.0 Darcy. The experiments were interpreted in terms of evolution of in-situ water saturation as a function of time by the usage of CT scanner, cumulative water, and pressure drop across the core. At very low surfactant concentration, no significant benefit was observed. But when stable foam generation started sweep efficiency (water recovery), breakthrough time, and pressure drop increased as surfactant concentration increased.

Optocouplers are used for a variety of applications aboard spacecraft including electrical isolation, switching and power transfer. Commercially available light emitting diode (LED)-based optocouplers have experienced severe degradation of light output due to extensive displacement damage occurring in the semiconductor lattice caused by energetic proton bombardment. A new optocoupler has been designed and fabricated which utilizes vertical cavity surface emitting laser (VCSEL) and resonant cavity photodetector (RCPD) technologies for the optocoupler emitter and detector, respectively. Linear arrays of selectively oxidized GaAs/AlGaAs VCSELS and RCPDS, each designed to operate at a wavelength of 850nm, were fabricated using an airbridge contacting scheme. The airbridged contacts were designed to improve packaging yields and device reliability by eliminating the use of a polyimide planarizing layer which provided poor adhesion to the bond pad metallization. Details of the airbridged optocoupler fabrication process are reported. Discrete VCSEL and RCPD devices were characterized at temperatures between {minus}100 to 100 C. Devices were packaged in a face-to-face configuration to form a single channel optocoupler and its performance was evaluated under conditions of high-energy proton bombardment.

This paper describes work in progress to develop a standard for interoperability among high-performance scientific components. This research stems from growing recognition that the scientific community must better manage the complexity of multidisciplinary simulations and better address scalable performance issues on parallel and distributed architectures. Driving forces are the need for fast connections among components that perform numerically intensive work and parallel collective interactions among components that use multiple processes or threads. This paper focuses on the areas we believe are most crucial for such interactions, namely an interface definition language that supports scientific abstractions for specifying component interfaces and a ports connection model for specifying component interactions.

This document presents data from Savannah River Site routine effluent monitoring and environmental surveillance programs.

The mission at the Savannah River Site (SRS) is focused primarily on support of the national defense, nonproliferation, and environmental cleanup. SRS-through its prime operating contractor, Westinghouse Savannah River Company-continues to maintain a comprehensive environmental monitoring program.

This LDRD project created and used advanced analysis capabilities to postulate scenarios and identify issues, externalities, and technologies associated with future ''things nuclear''. ''Things nuclear'' include areas pertaining to nuclear weapons, nuclear materials, and nuclear energy, examined in the context of future domestic and international environments. Analysis tools development included adaptation and expansion of energy, environmental, and economics (E3) models to incorporate a robust description of the nuclear fuel cycle (both current and future technology pathways), creation of a beginning proliferation risk model (coupled to the (E3) model), and extension of traditional first strike stability models to conditions expected to exist in the future (smaller force sizes, multipolar engagement environments, inclusion of actual and latent nuclear weapons (capability)). Accomplishments include scenario development for regional and global nuclear energy, the creation of a beginning nuclear architecture designed to improve the proliferation resistance and environmental performance of the nuclear fuel cycle, and numerous results for future nuclear weapons scenarios.

While traditional inertial fusion energy target designs typically use equimolar portions of deuterium and tritium and have areal densities ({rho}r) of {approx} 3 g/cm{sup 2}, significant safety and environmental (S and E) advantages may be obtained through the use of high-density ({rho}r {approx} 10 g/cm{sup 2}) targets with tritium components as low as 0.5%. Such targets would absorb much of the neutron energy within the target and could be self-sufficient from a tritium breeding point of view. Tritium self-sufficiency within the target would free target chamber designers from the need to use lithium-bearing blanket materials, while low inventories within each target would translate into low inventories in target fabrication facilities. Absorption of much of the neutron energy within the target, the extremely low tritium inventories, and the greatly moderated neutron spectrum, make ''tritium-lean'' targets appear quite attractive from an S and E perspective.

Z-pinches created using the Z accelerator generate {approximately}220 TW, 1.7 MJ radiation pulses that heat large ({approximately}10 cm{sup 3}) hohlraums to 100-150 eV temperatures for times of order 10 nsec. We are performing experiments exploiting this intense radiation to drive shock waves for equation of state studies. The shock pressures are typically 1-10 Mbar with 10 nsec duration in 6-mm-diameter samples. In this paper we demonstrate the ability to perform optical spectroscopy measurements on shocked samples located in close proximity to the z-pinch. These experiments are particularly well suited to optical spectroscopy measurements because of the relatively large sample size and long duration. The optical emission is collected using fiber optics and recorded with a streaked spectrograph. Other diagnostics include VISAR and active shock breakout measurements of the shocked sample and a suite of diagnostics that characterize the radiation drive. Our near term goal is to use the spectral emission to obtain the temperature of the shocked material. Longer term objectives include the examination of deviations of the spectrum from blackbody, line emission from lower density regions, determination of kinetic processes in molecular systems, evaluation of phase transitions such as the onset of metalization in transparent materials, and characterization of …