This short report discusses the differences between state militias (e.g. state Army National Guard and Air National Guard units), state military forces with no federal connections, and private organizations that claim to be state militias but which are not sanctioned by the state.

The construction of effective supergravity lagrangians for gaugino condensation is reviewed and recent results are presented that are consistent with modular invariance and yield a positive definite potential of the noscale type. Possible implications for phenomenology are briefly discussed. 29 refs.

The effects of the waste content of glass waste forms on Savannah River high-level waste disposal costs are currently under study to adjust the glass frit content to optimize the glass waste loadings and therefore significantly reduce the overall waste disposal cost. Changes in waste content affect onsite Defense Waste Changes in waste contents affect onsite Defense Waste Processing Facility (DWPF) costs as well as offsite shipping and repository emplacement charges. A nominal 1% increase over the 28 wt% waste loading of DWPF glass would reduce disposal costs by about $50 million for Savannah River wastes generated to the year 2000. Optimization of the glass waste forms to be produced in the SWPF is being supported by economic evaluations of the impact of the forms on waste disposal costs. Glass compositions are specified for acceptable melt processing and durability characteristics, with economic effects tracked by the number of waste canisters produced. This paper presents an evaluation of the effects of variations in waste content of the glass waste forms on the overall cost of the disposal, including offsite shipment and repository emplacement, of the Savannah River high-level wastes.

We discuss the use of muon spin relaxation ({mu}{sup +}SR) technique to study the mixed state of superconductors. Besides the application for static vortex configurations, we argue that large vortex motion can manifest itself as a narrowed time-averaged field distribution, which in turn results in a smaller relaxation rate. A static but disordered vortex configuration can also reduce the relaxation. We summarize these arguments. 7 refs.

The inclusive jet cross section and the dijet mass spectrum have been measured at the Fermilab Tevatron Collider at {radical}s = 1.8 TeV. These measurements span approximately 7 orders of magnitude in cross section and contain jets up to 400 GeV in transverse energy and dijet masses up to 950 GeV. Comparisons have been made to QCD at both orders {alpha}{sub s}{sup 2} and {alpha}{sub s}{sup 3}. 8 refs., 9 figs.

The purpose of this User's Guide is to show by example many of the features of Toolkit II. Some examples will be copies of screens as they appear while running the Toolkit. Other examples will show what the user should enter in various situations; in these instances, what the computer asserts will be in boldface and what the user responds will be in regular type. The User's Guide is divided into four sections. The first section, FOCUS Databases'', will give a broad overview of the Focus administrative databases that are available on the VAX; easy-to-use reports are available for most of them in the Toolkit. The second section, Getting Started'', will cover the steps necessary to log onto the Computer Center VAX cluster and how to start Focus and the Toolkit. The third section, Using the Toolkit'', will discuss some of the features in the Toolkit -- the available reports and how to access them, as well as some utilities. The fourth section, Helpful Hints'', will cover some useful facts about the VAX and Focus as well as some of the more common problems that can occur. The Toolkit is not set in concrete but is continually being revised and …

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification; Whether a school district is authorized to pay legal defense costs incurred by an employee in a criminal proceeding (ID# 39382)

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification; Whether bail bond may grant a license to an applicant who will do business under an assumed name recently abandoned by another licensee, and related questions (ID# 39375)

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification; Whether a county commissioners court is authorized to create a new position in the middle of a fiscal year (ID# 39410)

The primary objective of the present Phase 3 effort is to perform the final testing at a 20 MNBtu/hr commercial scale of an air cooled, slogging coal combustor for application to industrial steam boilers and power plants. The focus of the test effort will be on combustor durability, automatic control of the combustor`s operation, and optimum environmental control of emissions inside the combustor. In connection with the latter, the goal is to achieve 0.4 lb/MMBtu of SO{sub 2} emissions, 0.2 lb/MMBtu of NO{sub x} emissions, and 0.02 lb particulate/MMBtu. Meeting the particulate goal will require the use of a baghouse or electrostatic precipitator to augment the nominal 80% ash retention in the combustor. The NO{sub x} emission goal will require a modest improvement over reductions achieved to date in the combustor of 0.26 lb/MNBtu. To reach the SO{sub 2} emissions goal inside the combustor may require a combination of reduction inside the combustor and inside the boiler by injection of suitable sorbents. To date, SO{sub 2} levels as low as 0.6 lb/MNBtu, equal to 81% reduction in 2% sulfur coals, have been measured with boiler injection of sorbents.

The instrument has four basic components: OEM analytical balance, pivot point and capacitor plates for sensing and controlling the position of the long inverted pendulum, gas confinement tower and high voltage bias electrodes, and furnace. Work during the second quarter has resulted in detailed design of the pivot point and capacitive sensing and control assembly to be attached onto the platen of a Denver Instruments A-series analytical balance.

The DWPF Development Plan is based on an evaluation process flowsheet and related waste management systems. The scope is shown in Figure 1 entitled ``DWPF Process Development Systems.`` To identify the critical development efforts, each system has been analyzed to determine: The identification of unresolved technology issues. A technology issue (TI) is one that requires basic development to resolve a previously unknown process or equipment problem and is managed via the Technology Assurance Program co-chaired by DWPF and SRTC. Areas that require further work to sufficiently define the process basis or technical operating envelop for DWPF. This activity involves the application of sound engineering and development principles to define the scope of work required to complete the technical data. The identification of the level of effort and expertise required to provide process technical consultation during the start-up and demonstration of this first of a kind plant.

The US Department of Energy (DOE) has announced a new partnership with Zond Systems, Inc., of Tehachapi, California. The partnership is the firs to be announced under DOE`s new Value-Engineered Turbine (VET) project. The VET project is expected to lower the cost of manufacturing wind turbines and give the US wind industry a competitive boost.

The effects of the waste content of glass waste forms on Savannah River high-level waste disposal costs are currently under study to adjust the glass frit content to optimize the glass waste loadings and therefore significantly reduce the overall waste disposal cost. Changes in waste content affect onsite Defense Waste Changes in waste contents affect onsite Defense Waste Processing Facility (DWPF) costs as well as offsite shipping and repository emplacement charges. A nominal 1% increase over the 28 wt% waste loading of DWPF glass would reduce disposal costs by about $50 million for Savannah River wastes generated to the year 2000. Optimization of the glass waste forms to be produced in the SWPF is being supported by economic evaluations of the impact of the forms on waste disposal costs. Glass compositions are specified for acceptable melt processing and durability characteristics, with economic effects tracked by the number of waste canisters produced. This paper presents an evaluation of the effects of variations in waste content of the glass waste forms on the overall cost of the disposal, including offsite shipment and repository emplacement, of the Savannah River high-level wastes.

Under contract between US DOE Idaho National Engineering Laboratory (INEL) and the Blackhawk Geosciences Division of Coleman Research Corporation (BGD-CRC), geophysical investigations were conducted to improve the detection of buried wastes. Over the Cold Test Pit (CTP) at INEL, data were acquired with multiple sensors on a dense grid. Over the CTP the interpretations inferred from geophysical data are compared with the known placement of various waste forms in the pit. The geophysical sensors employed were magnetics, frequency and time domain electromagnetics, and ground penetrating radar. Also, because of the high data density acquired, filtering and other data processing and imaging techniques were tested. After completion and analysis of the survey and interpretation over the CTP, the second phase of investigation consisted of testing geophysical methods over the Idaho Chemical Processing Plant (ICPP). The sections of the ICPP surveyed are underlain by a complex network of buried utility lines of different dimensions and composition, and with placement at various depths up to 13 ft. Further complications included many metallic objects at the surface, such as buildings, reinforced concrete pads, and debris. Although the multiple geophysical sensor approach mapped many buried utilities, they mapped far from all utilities shown on the …

UGIMAG is manufacturing the NdFeB permanent magnet blocks to be used in undulator A now being assembled by STI Optronics. The authors would like to be able to compare measurements made at the plant with those made at ANL and potentially with those made at the STI facility. Since there are no permanent magnet standard samples, measurement systems are compared by trading sets of magnets set aside as standards. APS has ten NdFeB permanent magnet blocks supplied by Sumitomo that they use to make these comparisons. These magnet samples have been extensively measured on the APS system. The data include the three vector components of the total magnetic dipole moment of the blocks as well as the spherical coordinates of the vector.

The major objective of this work was to characterize the interactions of coal fly ash with polycyclic aromatic hydrocarbons (PAHS) and their derivatives, and to attempt to understand the influence of the surface properties of coal ash (and other atmospheric particles) on the chemical transformations of polycyclic aromatic compounds. Our studies have concentrated on the photochemical behavior of PAHs sorbed form the vapor phase on coal fly ashes, and compositional subfractions obtained therefrom. The PAHs are deposited onto the fly ash substrates from the vapor phase, using apparatus and techniques developed in this laboratory in order to simulate, as closely as possible under laboratory conditions, the processes by which PAHs deposit onto fly ash particles in the atmosphere. In this report phototransformation of pyrene sorbed on fly ash fractions, and phototransformations of 1-nitropyrene sorbed on fly ash fractions are discussed.

This document provides an analytical development in support of the proposed leak rate test of the 105-KE Basin. The analytical basis upon which the K-basin leak test results will be used to determine the basin leakage rates is developed in this report. The leakage of the K-Basin isolation barriers under postulated accident conditions will be determined from the test results. There are two fundamental flow regimes that may exist in the postulated K-Basin leakage: viscous laminar and turbulent flow. An analytical development is presented for each flow regime. The basic geometry and nomenclature of the postulated leak paths are denoted.

The particle beam, during injection into the storage ring, can be partly lost in one of the transition regions between the storage-ring vacuum chamber and the insertion-device (ID) straight section. The transition region is a copper interface between a standard aluminum vacuum chamber and an insertion-device vacuum chamber. This can be a problem, at least in the first few insertion devices where the injected beam is still unstable. It may create higher photon and neutron dose rates in the first optical enclosures of the upstream ID beamlines adjacent to this region. This report presents the results of the dose rate estimates for such an event and some recommendations for mitigation.

The purpose of the analysis is to provide design bases for Enhanced Characterization of the Repository Block (ECRB) alcove and niche ground support drawings. The objective is to evaluate the ESF Alcove Ground Support Analysis (Ref 5.1) to determine if the calculations technically bound the ECRB alcoves and to address specific differences in the conditions and constraints.

Recent high-voltage breakdown experiments of periodic metallic-dielectric insulating structures have suggested several interesting high-gradient applications. One such area is the employment of high-gradient insulators in high-current, electron-beam, accelerating induction modules. For this application, the understanding of the rf characteristics of the insulator plays an important role in estimating beam-cavity interactions. In this paper, we examine the rf properties of the insulator comparing simulation results with experiment. Different insulator designs are examined to determine their rf transmission properties in gap geometries.

We have studied the evolution of the edge plasma in VH-mode discharges in DIII-D as the discharge evolves from the ELM-free H-mode phase through the VH-mode phase to the final ELMing H-mode phase, by following the changes in the radial profiles of the density and temperature, in the core plasma near the separatrix and in the scrape-off-layer (SOL) plasma outside the separatrix. The electron density and temperature profiles in the SOL do not show any significant difference between the ELM-free H-mode and VH-mode phases. In the ELMing phase, the, density profile broadens during an ELM, forming a high density (n{sub e} > 1 x 10{sup 19}/m{sup 3}) plateau that extends out into the SOL to the limit of the measurement. This density plateau persists between the ELMs, although the density in the SOL does relax somewhat between the ELMs, with a characteristic time that can be larger than ten milliseconds, much longer than the sonic particle flow time to the divertor plates. The time average density scale length measured at the separatrix increases by about a factor of two after the ELMs begin. This density scale length increases with the ELM background, as measured by the photo-diodes nearest to, but …