This report describes batch and ion exchange column laboratory scale studies investigating ex situ methods to remove chromate (chromium [VI]), nitrate (NO{sub 3}{sup -}) and uranium (present as uranium [VI]) from contaminated Hanford site groundwaters. The technologies investigated include: chemical precipitation or coprecipitation to remove chromate and uranium; and anion exchange to remove chromate, uranium and nitrate. The technologies investigated were specified in the 100-HR-3 Groundwater Treatability Test Plan. The method suggested for future study is anion exchange.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

The presence of high concentrations of uranium in the subsurface can be attributed either to contamination from uranium processing activities or to naturally occurring uranium. A mathematical method has been employed to evaluate the isotope ratios from subsurface soils at the Rocky Flats Nuclear Weapons Plant (RFP) and demonstrates conclusively that the soil contains uranium from a natural source and has not been contaminated with enriched uranium resulting from RFP releases. This paper describes the method used in this determination which has widespread application in site characterizations and can be adapted to other radioisotopes used in manufacturing industries. The determination of radioisotope source can lead to a reduction of the remediation effort.

This report examines experimental results obtained from three P Tunnel events -- Mission Cyber, Disko Elm, and Distant Zenith. The objective of the study was to determine if there were any differences in the explosive source coupling for the three events. It was felt that Mission Cyber might not have coupled well because the ground motions recorded for that event were much lower than expected based on experience from N Tunnel. Detailed examination of the physical and chemical properties of the tuff in the vicinity of each explosion indicated only minor differences. In general, the core samples are strong and competent out to at least 60 m from each working point. Qualitative measures of core sample strength indicate that the strength of the tuff near Mission Cyber may be greater than indicated by results of static testing. Slight differences in mineralogic content and saturation of the Mission Cyber tuff were noted relative to the other two tests, but probably would not result in large differences in ground motions. Examination of scaled free-field stress and acceleration records collected by Sandia National Laboratory (SNL) indicated that Disko Elm showed the least scatter and Distant Zenith the most scatter. Mission Cyber measurements tend …

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification: Whether Senate Bill 522, Acts 1993, 73d Leg., ch. 774, which sets forth certain exceptions to the definition of the term “gambling divide,” conflicts with provisions of Senate Bill 1067, Acts 1993, 73d Leg., ch. 900, defining that term (RQ-609)

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification: Whether a private psychiatric treatment facility may provide airfare to a patient (ID# 22815)

The purpose of this document is to describe the radiological and chemical source terms for the major projects of the Solid Waste Operations Complex (SWOC), including Project W-112, Project W-133 and Project W-100 (WRAP 2A). For purposes of this document, the term ``source term`` means the design basis inventory. All of the SWOC source terms involve the estimation of the radiological and chemical contents of various waste packages from different waste streams, and the inventories of these packages within facilities or within a scope of operations. The composition of some of the waste is not known precisely; consequently, conservative assumptions were made to ensure that the source term represents a bounding case (i.e., it is expected that the source term would not be exceeded). As better information is obtained on the radiological and chemical contents of waste packages and more accurate facility specific models are developed, this document should be revised as appropriate. Radiological source terms are needed to perform shielding and external dose calculations, to estimate routine airborne releases, to perform release calculations and dose estimates for safety documentation, to calculate the maximum possible fire loss and specific source terms for individual fire areas, etc. Chemical source terms (i.e., …

The design of the Sign-Selected Quadrupole Train for E-815 (NuTeV) is set forth. The relevant physics requirements are explained. The optics of the beam are presented, along with an explanation of the proton dumping scheme. A discussion of rates and backgrounds follows, with special care given to backgrounds from scraping and obstructions. The relevant tolerances for beam construction are given and justified by simulations of the beamline. This leads to a discussion of the beam monitoring.

The overall goal of this program is to develop a system based on reverse-osmosis (RO) membranes that can treat oily water economically. This system will be based on the use of thin-film-composite (TFC) membranes that consist of a selective coating placed on a solvent-resistant hollow-fiber support. For this program, the authors plan to develop solvent-resistant hollow-fiber supports and coat them with a {open_quotes}loose-RO{close_quotes} coating. They developed the TTM coating used in this program in previous work for the treatment of oily waste waters. During this reporting period, work was focused on operating the demonstration test unit at a test site near Houston, Texas. During the next reporting period, the authors plan to continue long-term testing at the demonstration test site. The completion of the demonstration test, preparation of the final report, and technology transfer are the tasks remaining in this program.

The conceptual design of an Radioisotope Thermoelectric Generator (RTG) Facility Transportation System which is part of the overall RTG Transportation System has been completed and is described in detail. The Facility Transportation System serves to provide locomotion, cooling, shock protection and data acquisition for the RTG package during loading and unloading sequences. The RTG Facility Transportation System consists of a Transporter Subsystem, a Package Cooling Subsystem, and a Shock Limiting Transit Device Subsystem. The Transporter Subsystem is a uniquely designed welded steel cart combined with a pneumatically-driven hand tug for locomotion. The Package Cooling Subsystem provides five kilowatts of active liquid cooling via an on-board refrigeration system. The Shock limiting Transit Device Subsystem consists of a consumable honeycomb transit frame which provides shock protection for the 3855 kg (8500 LB) RTG package. These subsystems have been combined into an integrated system which will facilitate the unloading and loading of the RTG , of the Transport Trailer as well as meet ALARA radiation Package into and out exposure guidelines.

This paper presents scaling results based on simulations with the CALE hydrodynamics code of aluminum projectile impacts on typical aluminum Whipple shields at speeds of 6 to 14 km/s. The objective was to determine the extent of projectile and target material melting. The approach was to perform a matrix of computer simulations varying the impact speed from 6 to 14 km/s and varying the areal density of the shield from 5 percent to 80 percent of the centerline areal density of the projectile. The projectile radius was fixed at 9.5 mm (mass = 1.27 grams). The melt state of the projectile material and the shield material was assessed after release of the initial shock. The post-release specific energy in the projectile and in the shield was compared with the enthalpy of incipient melt and the enthalpy of complete melt provided in the Hultgren Tables. Material with specific energy greater than the enthalpy of complete melt was assumed to be fully melted; material with specific energy greater than the enthalpy of incipient melt but less than that of complete melt was assumed to be partially solid and partially melted mixed phase material with no strength; and material with specific energy less …

None

None

A method is described to increase the yield of Anti-Protons/cycle by about a factor of five, without building new storage rings. In this method, the full circumference of the Main Injector is filled and accelerated. Existing RF cavities are then used to perform ``snap coalescing`` which clumps the charge in azimuth to produce 28 large RF bunches {approximately}5ns long. These are then extracted and targeted in a single 11{mu}sec turn of the Main Injector. The resulting P-bars are injected into six turns of the Debuncher using a resonant kicker which injects every 21st RF bucket The result is that every 3rd RF bucket in the Debuncher is occupied. After an h=30 rotation in the Debuncher, ESME simulations indicate a final momentum spread of {plus_minus}0.25%. This is comparable to the current momentum spread after debunching. It is superior to the momentum spreads of {plus_minus}1.2% and {plus_minus}2% which would be produced by the Compressor Ring and Linear Debuncher.

The interaction of perfluorodiethoxymethane with a nickel single crystal, Ni(100); a nickel crystal with chemisorbed oxygen, Ni(100)-c(2x2)O; and a nickel crystal with nickel oxide crystallites, NiO(100) is investigated in an ultra high vacuum environment using thermal desorption spectroscopy and high resolution electron energy loss spectroscopy. Nickel, a component of hard disk drives and stainless steel, is used to represent metal surfaces in these {open_quotes}real{close_quotes} systems. Perfluorodiethoxymethane is used in this study as a model compound of industrial perfluoropolyether lubricants. These lubricants are known for their exceptional stability, except in the presence of metals. Perfluorodiethoxymethane contains the acetal group (-OCF{sub 2}O-), believed to be particularly vulnerable to attack in the presence of Lewis acids. Since the surfaces studied show increasing Lewis acidity at the nickel atom sites, one might expect to see increasing decomposition of perfluorodiethoxymethane due to acidic attack of the acetal group. No decomposition of perfluorodiethoxymethane is observed on the clean Ni(100) surface, while more research is needed to determine whether a small decomposition pathway is observed on the oxygenated surfaces, or whether sample impurities are interfering with results. The strength of the bonding of perfluorodiethoxymethane to the surface is found to increase as the nickel atoms sites become …

An analysis is presented of the direct radiation exposures and dose rates to personnel from assumed quantities of radioactive grout, and Double Shell Tank (DST) waste feed. This analysis was based on filling four disposal vaults per year. Whole body doses were analyzed for occupational workers assigned to the Grout Treatment Facility (GTF). The study makes assumptions that must be met by the facility. Otherwise, the GTF will meet all DOE and WHC direct radiation exposure criteria. This analysis will be published in the Grout Final Safety Analysis Report (FSAR).

In mechanical tests of tantalum-tungsten alloys with nominal tungsten contents between 0 and 10 wt % for strain rates between 0.000016 and 6800s{sup {minus}1} and temperatures between 77 and 400 K, the addition of tungsten noticeably reduces the strain-rate dependence of the flow stress of tantalum near yield. It also subtly alters the strain-rate behavior of the work hardening, making it more like that of copper, an fcc metal. These effects are reflected in the limiting strains for uniform plastic deformation calculated from our flow curves. For unalloyed tantalum, the instability strain appears to drop dramatically for strain rates in excess of approximately 0.005s{sup {minus}1}, whereas for tungsten bearing alloys, it remains unchanged or increases slightly. Tungsten alloys may therefore be preferable to unalloyed tantalum in applications that demand substantial ductility at high rates of strain. We briefly discuss possible mechanisms for plastic flow in tantalum and how they might be affected by tungsten additions to produce the effects we observe.

Based on new diiodo aryl compounds a series of novel soluble polymers, poly(2,5-dialkoxy-1,4-phenyleneethynylene)s (PPE polymers) were synthesized using palladium-catalysis. The molecular weights (MW) range from 8,000 to 40,000. Properties such as absorption, fluorescence, and conductivity were studied. A PPE polymer with butoxy side chain exhibits a weak electrical conductivity ({sigma} = 10{sup {minus}3} S/cm) after doping with AsF{sub 5}. Absorption spectra in THF solution at room temperature (RT) show a maximum at 440 nm. However, absorption spectra of PPE polymers in the film state at (RT) show a maximum at 480 nm. PPE polymer-based light emitting diode (LED) devices have been prepared; greenish light from these LED devices can be observed. Poly(ethynylene-p-arylene-ethynylene-silylene)s were synthesized through the same palladium-catalyzed polymerization; MWs are between 6,000 and 82,000. Absorption and fluorescence were studied. Some of these polymers exhibit thermotropic liquid crystalline properties. In addition, nonlinear optical properties were briefly examined. Poly(silylene-ethynylene) homopolymers as well as alternating copolymers were synthesized through a novel palladium-catalyzed polymerization; MWs range from 56 {times} 10{sup 3} to 5.3 {times} 10{sup 3}. Thermal stability of these was also investigated; char yields range from 56 to 83%. One of these polymers exhibits thermotropic liquid crystalline properties.

None

Phase space matching errors when transfering a beam from one circular accelerator to another.

The effect of thermal aging on tensile properties of cast stainless steels during service in light water reactors has been evaluated. Tensile data for several experimental and commercial heats of cast stainless steels are presented. Thermal aging increases the tensile strength of these steels. The high-C Mo-bearing CF-8M steels are more susceptible to thermal aging than the Mo-free CF-3 or CF-8 steels. A procedure and correlations are presented for predicting the change in tensile flow and yield stresses and engineering stress-vs.-strain curve of cast stainless steel as a function of time and temperature of service. The tensile properties of aged cast stainless steel are estimated from known material information, i.e., chemical composition and the initial tensile strength of the steel. The correlations described in this report may be used for assessing thermal embrittlement of cast stainless steel components.

A measurement capability using a horizontal array of 10 S4 current meters mounted on a stiff floating structure with 35m aperture has been developed to support interpretation of radar imaging of surface effects associated with internal gravity waves. This system has been fielded three times and most recently, has collected data alongside the sea-surface footprint of a land-fixed radar imaging ship-generated internal waves. The underlying need for this measurement capability is described. The specifications resulting from this need are presented and the engineering design and deployment procedures of the platform and systems that resulted are described. The current meter data are multiplexed along with meteorological and system status data onboard the floating platform and are telemetered to a shore station and on to a data acquisition system. The raw data are recorded, and are then processed to form space-time images of current and strain rate (a spatial derivative of the current field). Examples of raw and processed data associated with ship-generated internal waves are presented.

Error correction coils are planned for the TPX (Tokamak Plasma Experiment) in order to avoid error field induced locked modes and disruption. The FT (Fix Tokamak) code is used to evaluate the ability of these correction coils to remove islands caused by symmetry breaking magnetic field errors. The proposed correction coils are capable of correcting a variety of error fields.