Report presenting a wooden model equipped with a slotted flap that was tested in the two-dimensional tunnel. It represented a wing section of the Curtiss-Wright P-60A airplane and the NACA 66,2-118 section. Results regarding lift characteristics, drag coefficients, and flap deflection characteristics are provided.

"Pressure-distribution measurements were made at the request of the Materiel Division, U.S. Army Air Corps, on a 24-inch-chord wooden model equipped with a slotted flap and submitted by the Curtiss-Wright Corporation. The tests were made in the Langley two-dimensional tunnel at a Reynolds number of about 5,600,000" (p. 1).

Report presenting lift and drag tests made in the two-dimensional tunnel of three airfoil models. The models represented intermediate sections on alternative wings of the XB-32 airplane and were equipped with 0.30 Fowler flaps. Results regarding the Davis model, the C.A.C. model, and low-drag model are provided.

Some of the problems considered in this report include: thermodynamics of surface friction, application of thick wing sections, special applications of controllable propellers, and gas turbines for aircraft.

Report compiled by the U.S. Bureau of Mines including statistics on fatal and non-fatal accidents in coal mines located in the United States as well as data regarding the various operations (e.g., number of miners employed and average production). The information is organized into tables for comparison and the text draws some overall conclusions in the summary.

Report published by the U.S. Bureau of Mines regarding accidents at mines located in the United States for all operations except coal mines. The report includes statistics about the number and kinds of accidents as well as information about the mining operations (i.e., number of persons employed, average amount of work performed per person, etc.).

Report issued by the U.S. Bureau of Mines covering accidents that happened in metal mines located in the United States including statistics for injuries, fatalities, kinds and causes of accidents, and operational data, such as number of mine workers and shifts worked.

Report published by the U.S. Bureau of Mines which is a compilation of accidents in quarries located in the United States with data regarding the number and kinds of accidents as well as information about the mining operations (e.g., number of men employed, kinds of quarries, amount of work performed, etc.).

Report presenting tests in the 4- by 6-foot vertical wind tunnel of an NACA 0009 airfoil with a 30-percent-chord flap with a small amount of aerodynamic balance. In the investigation, the effect of balance nose shape and gap at the nose of the flap has been determined. The results indicate that, in general, the lift effectiveness of the flap was unaffected by the addition of a small amount of aerodynamic overhang, and the balance effectiveness of the flap was increased.

Report presenting tests made in the 4- by 6-foot vertical wind tunnel of an NACA 0009 airfoil with a 30-percent-chord flap with a medium amount of aerodynamic overhanging balance. In this investigation, the effects of the shape of the flap-nose overhang and the gap at the nose of the flap have been determined. The results indicate that, generally, the lift effectiveness of the aerodynamically balanced flap was increased slightly over that of a plain flap when a blunt or medium flap nose was used on the balanced flap.

Report presenting force tests conducted on a model of a section of the XP-63 horizontal tail surface in the 4- by 6-foot closed-throat vertical wing tunnel. The angle-of-attack range was from the negative to the positive stall for all flap deflections.

From Summary: "The data from previous NACA pressure-distribution investigations of plain flaps and tabs have been analyzed and are presented in this paper in a form readily applicable to the problems of control-surface design. The experimentally determined variation of aerodynamic parameters with flap chord and tab chord are given in chart form and comparisons are made with the theory. With the aid of these charts and the theoretical relationships for a thin airfoil, the aerodynamic characteristics for control surfaces of any plan form with plain flaps and tabs may be determined. A discussion of the basic equations of the thin-airfoil theory and the development of a number of additional equations that will be helpful in tail design are presented in the appendixes. The procedure for applying the data is described and a sample problem of tail design is included."

From Summary: "The data from previous NACA pressure-distribution investigations of plain flaps and tabs with sealed gaps have been analyzed and are presented in this paper in a form readily applicable to the problems of control-surface design. The experimentally determined variation of aerodynamic parameters with flap chord and tab chord are given in chart form and comparisons are made with the theory. With the aid of these charts and the theoretical relationships for a thin airfoil, the aerodynamic characteristics for control surfaces of any plan form with plain flaps and tabs with sealed gaps may be determined. A discussion of the basic equations of the thin-airfoil theory and the development of a number of additional equations that will be helpful in tail design are presented in the appendixes. The procedure for applying the data is described and a sample problem of horizontal tail design is included."

Report issued by the Bureau of Mines discussing mining safety in the Grass Valley mining district. As stated in the introduction, "the purpose of this paper is not to present an outstanding safety record but to show that gold mining can be pursued with the same degree of safety and improvement as any other industry, if and when the management recognizes that it can and must be done" (p. 1). This report includes tables, maps, illustrations, and photographs.

Theoretical derived expressions for the flapping, the thrust, the torque, and the profile drag-lift ratio of nonfeathering rotor with hinged, rectangular, linearly twisted blades are given as simple functions of the inflow velocity and the blade pitch. Representative values of the coefficients of each of the terms in these expressions are tabulated for a series of specified values of the tip-speed ratio. Analysis indicates that the tabulated values can be used to calculate, with reasonable accuracy, the characteristics of any rotor of conventional design.

Note presenting computations made to determine the effects of some airplane design trends on the fin area and the dihedral angle required for lateral stability. The specific factors studied were wing loading, moments of inertia in roll and yaw, wing chord, and tail length. The results of the computations are presented in the form of diagrams of variations of fin area with dihedral angle for neutral stability.

This report is part of a series describing the structural features, the character of the oil- and gas-producing beds, and the localities where additional oil and gas may be found in parts of Osage County, Oklahoma. This part discusses the geology and resources in the southwestern part of the county.

Report presenting force tests of the NACA 23012 and 23012-64 airfoils of 24-inch chord in the high-speed wind tunnel at a range of Mach numbers. The results show the variation with mach number of lift, drag, and pitching-moment coefficients at a range of angles of attack.

"A single-stage axial fan was built and tested in the shop of the propeller-research tunnel of the NACA. The fan comprised a simple 24-blade rotor having a diameter of 21 inches and a solidity of 0.86 and a set of 37 contravanes having a solidity of 1.33. The rotor was driven by a 25-horsepower motor capable of rotating at a speed of 3600 r.p.m. The fan was tested for volume, pressure, and efficiency over a range of delivery pressures and volumes for a wide range of contravane and blade-angle settings" (p. 49).

Report discusses the design of a cooling system developed for a Pratt & Whitney H-2800 engine equipped with a two-stage supercharger. The wing-duct system was newly developed and was determined to be a valuable method for cooling engine auxiliaries by combining simplicity with low drag and excellent cooling capabilities.

Problem of improving thrust at low speeds is primarily one of reducing angle of attack of operation of sections to improve L/D or reducing blade helix angle. An analysis, based on recent propeller data, is presented for determining improvements in thrust or efficiency which could be obtained by increased number of blades, increased blade width, increased diameter, dual rotation, and two-speed gearing. All methods were found very effective, particularly two-speed gearing.

Tests of 10-ft. diameter, eight-blade, single - and dual - rotating propellers were conducted in 20-ft propeller research tunnel. Propellers were mounted at front end of a streamline body in spinners that covered hubs and parts of shanks. Effect of a symmetrical wing mounted in slipstream was investigated. Blade-angle settings ranged from 20 Degrees to 65 Degrees. Results indicated that dual rotation resulted in gains of from 1 to 8 percent in efficiency over single rotation for eight-blade propellers, but presence of a wing reduced gain about one-half. Greater power absorption caused by dual rotation over flight range and higher efficiency or thrust for range of take-off and climb was indicated.

"A number of factors are considered which influence the static and fatigue strength of materials under practical operating conditions as contrasted with the relations obtaining under conditions of the usual testing procedure. Such factors are interruptions in operation, periodically fluctuating stress limits and mean stresses with periodic succession of several groups and stress states, statistical changes and succession of stress limits and mean stresses, frictional corrosion at junctures, and notch effects" (p. 1).

From introduction: "The Boltzmann equation expressing conversation of particles in phase space is set up."