Report presenting a series of single-cylinder engine tests run to determine a satisfactory method of reducing oil consumption in radial air-cooled engines with flat-face compression rings as standard parts and equipped with cylinder barrels salvaged by porous chrome plating. Testing was conducted using porous chrome-plated cylinders with straight and choke bores with standard flat-face compression rings.

Report discussing an investigation into several types and sizes of flaps and spoilers located forward of the elevators on the upper surface of the horizontal stabilizer of a model of a radial-engine pursuit airplane. Information about the elevator characteristics, elevator-fixed and elevator-free balance lift coefficient, and trim drag coefficient for a range of Mach numbers is provided.

Report presenting an investigation in the two-dimensional low-turbulence tunnels for the purpose of developing an optimum flap configuration for maximum lift on an airfoil section for the Republic XF-12 airplane equipped with a double slotted flap. Lift and flap loads were obtained at several flap deflections for two flap paths. Results regarding lift, drag, and flap loads are provided.

Report discussing the results of testing to determine the aerodynamic characteristics of three NACA-designed airfoil sections, some with flaps equipped. The tests included determination of the aerodynamic characteristics of the airfoils in smooth conditions and with standard roughness applied to the leading edge. Lift tests were also carried out at a range of flap deflections.

"The purpose of the present work is to extend the previous investigation and to derive additional airfoil sections designed to minimize the undesirable characteristics of the previously tested airfoils. The tests of these additional airfoils were made in the Langley two-dimensional low-turbulence tunnel (LTT)" (p. 2).

Report presenting testing to determine the aerodynamic characteristics of an NACA 66-series 16-percent-thick low-drag tapered wing with Fowler and split flaps. The wing had a straight trialing edge and a constant-chord center section. Results regarding lift and pitching-moment characteristics and stalling characteristics are provided.

"An investigation has been conducted in the Langley rectangular high-speed tunnel to determine the effect of compressibility on the pressure distribution for a modified NACA 65,3-019 airfoil having a 0.20-chord flap. The investigation was made for an angle-of-attack range extending from -2 to 12 deg at .20 flap deflections from 0 to -12 deg. Test data were obtained for Mach numbers from 0.28 to approximately 0.74" (p. 1).

Report discussing several types of jet-exit designs, including normal, beveled, and unsymmetrical shapes, and their effect on the stability characteristics of the aircraft. No deviation of the jet center line from its exposed path is likely to be obtained if a jet exist is used that is normal to the flow. Having a tilted or asymmetrical exit was found to adversely affect the stability of the aircraft.

"The gross weight, beam, and afterbody length of 12 contemporary flying boats and amphibians with pointed afterbodies are tabulated and correlated. For most of the hulls considered, the afterbody length-beam ratios are shown to be directly proportion to the gross-load coefficients" (p. 1).

"A machined mixed-flow centrifugal impeller of a relatively complex passage shape was used as a pattern to cast a number of aluminum-alloy impellers from two aluminum-base alloys (designated alloys 1 and 2) by the 'lost wax' process. An investigation was conducted to determine whether these cast impellers, could be considered satisfactory for use in compressors. The investigation included preliminary examination, physical tests, metallurgical examination, and performance tests" (p. 1).

Data are presented of the flow conditions in the vicinity of an NACA D sub S -type cowling. Tests were made of a 1/2 scale-nacelle model at inlet-velocity ratios ranging from 0.23 to 1.02 and angles of attack from 6 deg to 10 deg. The velocity and direction of flow in the vertical plane of symmetry of the cowling were determined from orifices and tufts installed on a board aligned with the flow. Diagrams showing velocity ratio contours and lines of constant flow angles are given.

Report discussing an investigation into cowl-flap and cowl-outlet designs for the B-29 in order to determine the effects of cowling performance of different types of flaps and elements of flaps. Details of the available pressure drop and cooling-air pressure-drop distribution are also provided.

From Introduction: "An investigation of the power-plant installation of a single-engine torpedo-bomber-type airplane has been conducted in the NACA Cleveland altitude wind tunnel at the request of the Bureau of Aeronautics, Navy Department. A similar investigation was previously conducted on a three-tenths scale mock-up of the forward portion of the fuselage of this airplane in the Langley 20-foot tunnel. (See reference 1)."

Report discussing the characteristics of the jet-motor air-intake duct system for a pursuit-type airplane with modifications to the duct system. Details of its effects on the Mach number, high pressure recovery, drag, and simplicity of the system are provided. Problems regarding the flow condition through the ducts and some potential modifications to prevent further issues are also described.

Report presenting an investigation to determine the effect of the location of the diffuser vanes with respect to the supercharger outlets and the effect of flow conditions at the impeller inlet on the air-flow distribution in the outlets of the engine-stage supercharger of an 18-cylinder double-row radial aircraft engine. The effect of flow conditions at the impeller inlet was investigated by distorting the flow at the inlet and noting the effect in the supercharger outlets. Results regarding the diffuser effect and inlet effect are provided.

Report discussing a mock-up injection impeller created to investigate the hydraulic characteristics and limitations of the NACA injection impeller currently in use. Information about the form and magnitude of critical factors of fuel-transfer leakage and peripheral fuel distribution is provided as well as the effects of design variations of components on hydraulic characteristics. Several revisions in portions of the impeller are suggested to improve its fuel-transfer, fuel-pumping, and fuel-equalizing characteristics.

Report discussing the results of accelerated erosion tests to determine the separate effects of the passage of fuel, water, and ice particles through a supercharger. Recommendations for preventing erosion are provided, including materials choice and joint design.

Report discussing an investigation of the cooling characteristics of an R-2600-22 engine installed in a PBM-3D nacelle. The investigation explored the general cooling characteristics by the NACA cooling-correlation method and an investigation of specific points on the engine cylinder where cooling was critical, including the exhaust-valve-crown and number 3 cylinder.

Report presenting an examination of the surfaces of used cast-iron piston rings from various single-cylinder aircraft engine tests by electron diffraction. Generally, the oxide patterns were obtained to an appreciable extent from only the top compression ring of the piston-ring assembly; the other rings gave predominately a graphite pattern.

An investigation was conducted to compare the performance of two 25-ft-diam rotors which had identical dimensions and were similar in construction but different in blade airfoil-sections. Tests were conducted at indicated blade pitch angles from 3 degrees to 11.5 degrees and rotor speeds of 200, 290, and 371 rpm. The 23012.6 rotor required 2 percent less power to hover than the 0012.6. At thrust coefficients above design, the performance of the 23012.6 became better than the 0012.6 rotor.

"A preliminary analysis has been made of the conditions of stability of free oscillations of a hinged rotor in hovering flight. The case analyzed is a rotor with hinges allowing freedom in flapping and lagging and having a completely reversible cyclic pitch-control system, so that a twisting moment on a blade moves the control stick without hindrance from spring or friction constraint. The principal results of this study are presented in the form of a stability chart" (p. 1).

Report discussing a series of single-cylinder engine tests to determine the effect of special surface coatings in porous chrome-plated cylinder barrels on oil consumption and ring wear. The coating materials were selected for their bearing and lubrication properties and on their applicability to processing. The surface coatings tested were lead overplates, silver overplates, and colloidal graphite base paint.

"A relatively simple equation has been found to express with fair accuracy, variation in manifold-charge temperature with charge in engine operating conditions. This equation and associated curves have been checked by multi cylinder-engine data, both test stand and flight, over a wide range of operating conditions. Average mixture temperatures, predicted by the equations of this report, agree reasonably well with results within the same range of carburetor-air temperatures from laboratories and test stands other than the NACA" (p. 1).

Report discussing the effects of various inlet pressures, inlet temperatures, wheel speeds, pressure ratios, and cooling-air flows on the performance of a radial-flow exhaust-gas turbosupercharger turbine with a 12.75-inch tip diameter. Information about efficiency is provided for a given blade-to-jet speed ratio.