The Generic TRUEX Model (GTM) was used to simulate three different counter-current flowsheet tests performed using mixer-settlers that had been carried out prior to 1993 in the Chemical Processing Facility, Tokai-works, of the Power Reactor and Nuclear Fuel Development Corporation (PNC) of Japan. The feed for the PNC runs was the highly active raffinate from reprocessing of spent fuel from fast breeder reactors. The PNC demonstration runs were planned without using the GTM. Results predicted by the GTM and those obtained experimentally by PNC for the three demonstration runs are compared. Effects of stage efficiency, nitrate complexation, temperature, and equipment type are also included.

This report describes the primary physical models that form the basis of the DART mechanistic computer model for calculating fission-product-induced swelling of aluminum dispersion fuels; the calculated results are compared with test data. In addition, DART calculates irradiation-induced changes in the thermal conductivity of the dispersion fuel, as well as fuel restructuring due to aluminum fuel reaction, amorphization, and recrystallization. Input instructions for execution on mainframe, workstation, and personal computers are provided, as is a description of DART output. The theory of fission gas behavior and its effect on fuel swelling is discussed. The behavior of these fission products in both crystalline and amorphous fuel and in the presence of irradiation-induced recrystallization and crystalline-to-amorphous-phase change phenomena is presented, as are models for these irradiation-induced processes.

As a result of the U.S. Department of Energy's environmental restoration and technology development activities, GTS Duratek, Inc., and its subcontractors have demonstrated an integrated thermal waste treatment system at Fernald, OH, as part the Minimum Additive Waste Stabilization (MAWS) Program. Specifically, MAWS integrates soil washing, vitrification of mixed waste streams, and ion exchange to recycle and remediate process water to achieve, through a synergistic effect, a reduction in waste volume, increased waste loading, and production of a durable, leach-resistant, stable waste form suitable for disposal. This report summarizes the results of the demonstration/testing of the soil washing component of the MAWS system installed at Fernald (Plant 9). The soil washing system was designed to (1) process contaminated soil at a rate of 0.25 cubic yards per hour; (2) reduce overall waste volume and provide consistent-quality silica sand and contaminant concentrates as raw material for vitrification; and (3) release clean soil with uranium levels below 35 pCi/g. Volume reductions expected ranged from 50-80 percent; the actual volume reduction achieved during the demonstration reached 66.5 percent. The activity level of clean soil was reduced to as low as 6 pCi/g from an initial average soil activity level of 17.6 pCi/g (the …

A Reynolds stress model (RSM) of turbulence, based on seven transport equations, has been linked to the COMMIX-1C/RSM and CAPS-3D/RSM computer codes. Six of the equations model the transport of the components of the Reynolds stress tensor and the seventh models the dissipation of turbulent kinetic energy. When a fluid is heated, four additional transport equations are used: three for the turbulent heat fluxes and one for the variance of temperature fluctuations. All of the analytical and numerical details of the implementation of the new turbulence model are documented. The model was verified by simulation of homogeneous turbulence.

Annual report of activities of the Argonne National Laboratory Physics Division, including heavy-ion nuclear physics research, operation and development of ATLAS, medium-energy nuclear physics research, theoretical physics, atomic and molecular physics research.

A Photogeologic map of the Stinking Spring Creek Quadrangle, located in Emery County, Utah. Prepare in cooperation with the Atomic Energy Commission.

Aid in redesign of the calibration facility in order to: 1. Reduce the rate of exposure for calibration personnel below 1 mr/hr; 2. Reduce the rate of exposure outside of the 3745 Building; 3. Reduce the risk of breaking radium sources; 4. Improve the efficiency of calibration procedures by: a. Allowing calibration to be done faster; b. Providing several calibration ranges which can operate simultaneously in the present space allowed; c. Allowing instrument survey work to proceed while calibration work is done. A well-type calibration installation is proposed and a brief description of the required shielding is included.