This quarterly progress report details ongoing work at the Oak Ridge National Laboratory as part of the Aircraft Nuclear Propulsion Project. Topics of discussion include reactor theory and design, shielding research, materials research, appendixes with information on ongoing analytical chemical studies.

From summary: "The hazards due to possible chemical explosion and detonation of the dissociation gases in homogeneous-reactor systems have been considered."

"This symposium is concerned with the basic aspects of radiation effects. When we turn to the genetic effects of radiation in mammals, there are so few aspects on which there is any information that the problem of sorting out the fundamental findings has hardly arisen. In this paper it will, therefore, be possible to survey most of what is known and pass on to a consideration of what is needed next. Since one of the purposes of this symposium is an interchange of views between investigators in different fields, an attempt will be made to avoid technical details. Among the practical needs in mammalian radiation genetics is a pressing one for more data on which to base estimates of the genetic hazards of radiation in man. The present paper will be concerned largely with this problem. Our own work is directed primarily in this direction, our objective being to uncover some of the basic facts in at least one mammal-the mouse. Before discussing the experimental work, however, it seems desirable to consider some of the general features of the genetic hazard of radiation."

From summary: "The influence of the structure of phosphate esters on the distribution coefficient of uranium between solutions of these esters in carbon tetrachloride and aqueous nitrate solutions has been studied. Esters of secondary alcohols showed higher distribution coefficients than primary alcohols. Phenyl esters extracted less uranium than alkyl esters, and the presence of other negative groups also resulted in less extraction. Compounds containing carbon to phosphorus bonds gave higher distribution coefficients than the corresponding esters, and the distribution coefficients increased with the number of such carbon to phosphorus bonds. Tributyl phosphine oxide (with three carbon to phosphorus bonds) showed high distribution coefficients with many salts, including uranyl nitrate, uranyl sulfate, uranyl chloride, thorium nitrate, plutonium (IV) nitrate and some of the fission products in nitrate solution. It is planned to study these and similar compounds further."

This quarterly progress details the ongoing work of the Protective Equipment Evaluation Program at the Oak Ridge National Laboratory. Topics discussed include aerosol generation, penetration studies, particle size measurement, and an appendix with analytical methods.

From introduction: "The tube arrangement covered in this report was proposed in June, 1950, as a means of halving the weight and volume required for the heat exchanger. Ideally, the pressure drop across this arrangement should be little more than that required to overcome the skin friction on the tube surfaces. If the pressure drop across the tube spacers and in the cross-flow regions can be kept low, this ideal can be approached. much of the test work covered in this report was devoted to this phase of the problem."

From abstract: "This report presents the laboratory development of the MTR-RaLa Process for the production of barium140 from Materials Testing Reactor assemblies." The laboratory studied four possible chemical schemes with the final process being chosen "on the basis of chemical yield and purity of product, ease of recovery of uranium235, simplicty of equipment, and overall time required for processing" (from introduction).

An investigation of the materials for use in the water-moderated and cooled Aray Package Power Reactor (APPR) operating at about 500°F was made. The available literature was analyzed, and the results of the different investigators were compared and averaged. Twenty different materials, including stainless steels, nickel alloys, Stellites and others, were investigated from the point of view of physical properties, susceptibility to radiation damage, and corrosion resistance. Corrosion rates were established for all the materials under various conditions, such as irradiation, flow weld, stress, and various water conditions. Type-304 stainless steel was selected as the basic structural material. Operating conditions, to maintain minimum corrosion, were established also.

A fifth in-pile loop experiment, L-4-8, was completed. The loop operated in-pile for a total of 1637 hr, during which time the LITR energy output was 4377 Mwhr. The average fission power in the loop based o cesium analyses was 622 w when the LITR was at full power (3 Mw). Based on oxygen data, the generalized corrosion rate for the first 300 hr was 4.0 mpy; the rate for the remaining 1357 hr was 0.7 mpy. The nickel data gave parallel results. The corrosion of the type 347 stainless steel, Zircaloy-2, and Ti-55AX [unintelligible] exposed in the core and in in-line holders was generally consistent with that observed in previous in-pile loop experiments. Some differences with steel were attributed to the fact that this was the first loop containing steel specimens operated with 0.04 m H2SO4 present in the uranyl sulfate charge solution (0.17 m UO2SO4, 0.03 m CuSO4). Stress specimens, made from the alloys Zircaloy-2, type 17-4 PH stainless steel, and Ti-C-130-AM, were exposed in care, in-line, and pressurizer locations. Microscopic examination and average weight loss gave no indication of effects attributable to the stressed condition of the specimens.

Several potential hazards that have been recognized and anticipated in the design and fabrication of the pressure vessel in the Homogeneous Reactor Test are discussed. These hazards results from the high operating pressure and temperature of the reactor, the exposure of the reactor vessel material to potential embrittlement and other affects of fast-neutron irradiation, and the need for containment of corrosive flowing liquids. The steps taken in recognition of these hazards are also discussed. The applicability of present codes to the reactor vessel fabrication is considered. Additional fields are suggested where recommended practices developed by code writing bodies could assist in development-type reactor design and fabrication.

This quarterly progress report describes the ongoing research at the Metallurgy Division at the Oak Ridge National Laboratory. In particular, this report discusses the thorium research program, the slug problem, the preferred orientation and anisotropy in metals, fundamental studies of alloying, and the ANP program.

Report issued by the Oak Ridge National Laboratory discussing work and progress made by the Health and Physics Division during 1963. Instrumentation, personnel monitoring, and laboratory monitoring is presented. This report includes maps, tables, illustrations, and photographs.

Report presenting the calculation of the costs incurred in shipping irradiated uranium-containing fuel elements. A computer code that designs a cask and calculates the shipping costs is presented. By use of the code, shipping costs were calculated for typical reactor fuels.

Report that "describes a new version of the code, POWERC-50, which contains several changes" to the previous code, POWERCO-25, which was used to calculate "the levelized cost of electricity produced by nuclear power stations" (p. 1)

Report containing ongoing projects and experiments undertaken by the Oak Ridge National Laboratory's Molten-Salt Reactor Program.

From introduction: "This is the eleventh of a series of quarterly reports which will cover the progress and results from the conceptual design, economic evaluations and research and development work performed by the General Electric Company as part of the Nuclear Superheat Project."

Quarterly report discussing progress on the Fast Ceramic Reactor Development Program, "an integrated analytical and experimental program directed toward the development of fast reactors employing ceramic fuels, with particular attention to mixed plutonium-uranium oxide" (p. 1).

First volume of a compilation of information about reactor containment, written by experts from a variety of organizations.

Report presenting in-pile loop experiments DD, EE, FF, GG, L-412, L-413, and L-418, which were seven of a series designed to test the radiation corrosion of zirconium, titanium, and stainless steel alloys in solutions under various conditions of radiation intensity, temperature, solution composition, and velocity of flow. Steel specimens exposed in the loop cores showed increases in corrosive attack over that expected out-of-radiation.

Report issued by the Oak Ridge National Laboratory discussing the production separation for the radioisotope program. As stated in the abstract, "a general description is given of five years' experience in routine production of fission products of high concentration and high activity levels for the radioisotope program. Details of construction and production processes are given for two systems which were built on ion-exchange principle" (p. 2). This report includes illustrations, and photographs.

Report issued by the Oak Ridge National Laboratory discussing the aging characteristics of the alloy Hastelloy B. Materials, equipment, experimental procedures, and results used to determine the characteristics of the alloy are presented. This report includes tables, illustrations, and photographs.

Report that describes the research and developments of the Nuclear Safety Research and Development Program of the Oak Ridge National Laboratory.

Report containing a survey of the radiation from the nuclear ship Savannah in order to determine the dose rate for people aboard.

Report containing a series of drawings detailing the Oak Ridge National Laboratory's high flux isotope reactor, its surroundings, and its systems.