An efficient inversion algorithm has been developed forthree-dimensional (3D) interpretations for single-hole electromagnetic(EM) logging data based on a modified extended Born approximation (MEBA)scheme. The single-hole data was collected at an oil field undergoing CO2injection in southern California using a tool, Geo-BILT, developed byElectromagnetic Instruments, Inc (EMI). The tool is equipped with amulti-component source, and an array of multi-component receivers atdifferent separations. The inversion result provides a reasonableelectrical conductivity image to a distance of 10 m from the well, andillustrates several zones with lateral conductivity variations that couldnot be resolved with traditional induction logging tools. The computercost of the inversion processes can be further reduced using a trivialmulti-grid methodology.

None

The current plans for the Yucca Mountain (YM) repository project (YMP) use steel structures to stabilize the disposal drifts and connecting tunnels that are collectively over 100 kilometers in length. The potential exist to reduce the underground construction cost by 100s of millions of dollars and improve the repository's performance. These economic and engineering goals can be achieved by using the appropriate cementitious materials to build out these tunnels. This report describes the required properties of YM compatible cements and reviews the literature that proves the efficacy of this approach. This report also describes a comprehensive program to develop and test materials for a suite of underground construction technologies.

The design and analysis of measurements performed with organic scintillators rely on the use of Monte Carlo codes to simulate the interaction of neutrons and photons, originating from fission and other reactions, with the materials present in the system and the radiation detectors. MCNP-PoliMi is a modification of the MCNP-4c code that models the physics of secondary particle emission from fission and other processes realistically. This characteristic allows for the simulation of the higher moments of the distribution of the number of neutrons and photons in a multiplying system. The present report describes the recent additions to the MCNP-PoliMi post-processing code. These include the simulation of detector dead time, multiplicity, and third order statistics.

The critical height for DNAPL entry into a partially watersaturated, dead-end fracture is derived and compared to laboratoryobservations. Experiments conducted in an analog, parallel-plate fracturedemonstrate that DNAPL accumulates above the water until the height ofthe DNAPL overcomes the sum of the capillary forces at the DNAPL-airinterface and at the DNAPL-water interface. These experiments also showthat DNAPL preferentially enters the water at locations where DNAPL haspreviously entered, and the entry heights for these subsequent entriesare lower than the heights measured for the initial invasion. The wettingcontact angle at the DNAPL-water interface becomes larger at thelocations where the DNAPL has already entered the water because ofresidual DNAPL on the fracture walls, which results in lowering thecritical entry height at those locations. The experiments alsodemonstrate that a DNAPL lens can remain nearly immobile above the waterfor a period of time before eventually redistributing itself and enteringthe water.

Reliable quantitative prediction of contaminant transport in subsurface environments is critical to evaluating the risks associated with radionuclide migration. As part of the Underground Test Area (UGTA) project, radionuclide transport away from various underground nuclear tests conducted in the saturated zone at the Nevada Test Site (NTS) is being examined. In the near-field environment, reactive transport simulations must account for changes in water chemistry and mineralogy as a function of time and their effect on radionuclide migration. Unlike the K{sub d} approach, surface complexation (SC) reactions, in conjunction with ion exchange and precipitation, can be used to describe radionuclide reactive transport as a function of changing environmental conditions. They provide a more robust basis for describing radionuclide retardation in geochemically dynamic environments. The interaction between several radionuclides considered relevant to the UGTA project and iron oxides and calcite are examined in this report. The interaction between these same radionuclides and aluminosilicate minerals is examined in a companion report (Zavarin and Bruton, 2004). Selection criteria for radionuclides were based on abundance, half-life, toxicity to human and environmental health, and potential mobility at NTS (Tompson et al., 1999). Both iron oxide and calcite minerals are known to be present at NTS in …

None

OpenMP is a widely adopted standard for threading directives across compiler implementations. The standard is very successful since it provides application writers with a simple, portable programming model for introducing shared memory parallelism into their codes. However, the standards do not address key issues for supporting that programming model in development tools such as debuggers. In this paper, we present DMPL, an OpenMP debugger interface that can be implemented as a dynamically loaded library. DMPL is currently being considered by the OpenMP Tools Committee as a mechanism to bridge the development tool gap in the OpenMP standard.

This report summarizes the accomplishments toward project goals during the first twelve months of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts, acquisition and installation of a research gasoline engine, and modification of diesel engines for use in evaluating diesel produced in the project. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Equipment is now in place to begin fuel oil evaluations to assess the quality of coal based fuel oil. Coal samples have procured and are being assessed for cleaning prior to use in coking studies.

An analysis of the links between high impact technologies and publicly funded scientific research.

This report describes FY 2003 technical studies conducted by the Chemical Biology and Nuclear Science Division (CBND) at Lawrence Livermore National Laboratory (LLNL) in support of the Hydrologic Resources Management Program (HRMP) and the Underground Test Area (UGTA) Project. These programs are administered by the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) through the Defense Programs and Environmental Restoration Divisions, respectively. HRMP-sponsored work is directed toward the responsible management of the natural resources at the Nevada Test Site (NTS), enabling its continued use as a staging area for strategic operations in support of national security. UGTA-funded work emphasizes the development of an integrated set of groundwater flow and contaminant transport models to predict the extent of radionuclide migration from underground nuclear testing areas at the NTS. The present report is organized on a topical basis and contains five chapters that reflect the range of technical work performed by LLNL-CBND during FY 2003. Although we have emphasized investigations that were led by CBND, we also participated in a variety of collaborative studies with other UGTA and HRMP contract organizations including the Energy and Environment Directorate at LLNL (LLNL-E&E), Los Alamos National Laboratory (LANL), the Desert Research …

Core Leak-off tests are commonly used to ascertain the ability of a drilling fluid to seal permeable rock under downhole conditions. Unfortunately, these tests are expensive and require a long time to set up. To monitor fluid invasion trends and to evaluate potential treatments for reducing fluid invasion on location, a simpler screening test is highly desirable. The Capillary Suction Time (CST) Test has been used since the 1970's as a fast, yet reliable, method for characterizing fluid filterability and the condition of colloidal materials in water treatment facilities and drilling fluids. For the latter, it has usually been applied to determine the state of flocculation of clay-bearing fluids and to screen potential shale inhibitors. In this work, the CST method was evaluated as a screening tool for predicting relative invasion rates of drilling fluids in permeable cores. However, the drilling fluids examined--DRILPLEX, FLOPRO, and APHRON ICS--are all designed to generate low fluid loss and give CST values that are so high that fluid invasion comes to be dominated by experimental artifacts, such as fluid evaporation. As described in this work, the CST procedure was modified so as to minimize such artifacts and permit differentiation of the fluids under investigation.

JET plasmas with reverse magnetic field feature a different SOL flow than those with normal field. The observed carbon fueling efficiency from injecting methane gas was similar in reverse and normal field. EDGE2D modeling used an externally applied force to create the SOL flows, without specifying the origin of the force. The resulting flow agreed reasonably with the experimental values between the separatrix and 4 cm mid-plane depth in the SOL. The effect of the flow on the calculated carbon screening was 5 to 15% higher carbon fueling efficiency for the low flow velocity with reverse field.

Initiatives are underway at the Savannah River Site (SRS) to accelerate the disposition of the supernate and salt portions of the waste in the SRS High Level Waste (HLW) tank farm system. Significant savings in processing time and overall cost could be achieved by in situ treatment of waste supernate or dissolved salt inside a tank farm waste tank. For treatment of actinides and strontium in waste, the baseline method is sorption onto monosodium titanate (MST), an engineered powder with mean particle size of approximately 10 microns. In a separate study at the Savannah River National Laboratory (SRNL), engineered forms of MST were developed and compared on a small (250-mL) scale in batch tests. In the current study, a promising form of engineered MST was tested under two conditions: a traditional ion exchange (or adsorption) column and a porous, flow through device called a tea bag, immersed in solution. Both tests used the same amount of engineered MST to treat 10 L of simulated waste solution containing plutonium and strontium.

The scope of this photoelectrochemical hydrogen research project is defined by multijunction photoelectrode concepts for solar-powered water splitting, with the goal of efficient, stable, and economic operation. From an initial selection of several planar photoelectrode designs, the Hybrid Photoelectrode (HPE) has been identified as the most promising candidate technology. This photoelectrode consists of a photoelectrochemical (PEC) junction and a solid-state photovoltaic (PV) junction. Immersed in aqueous electrolyte and exposed to sunlight, these two junctions provide the necessary voltage to split water into hydrogen and oxygen gas. The efficiency of the conversion process is determined by the performance of the PEC- and the PV-junctions and on their spectral match. Based on their stability and cost effectiveness, iron oxide (Fe2O3) and tungsten oxide (WO3) films have been studied and developed as candidate semiconductor materials for the PEC junction (photoanode). High-temperature synthesis methods, as reported for some high-performance metal oxides, have been found incompatible with multijunction device fabrication. A low-temperature reactive sputtering process has been developed instead. In the parameter space investigated so far, the optoelectronic properties of WO3 films were superior to those of Fe2O3 films, which showed high recombination of photo-generated carriers. For the PV-junction, amorphous-silicon-based multijunction devices have been studied. …

A platinum-lined, flowing autoclave facility was used to investigate the solubility behavior of nickel(II) oxide (NiO) in deoxygenated ammonium and sodium hydroxide solutions between 21 and 315 C. Solubilities were found to vary between 0.4 and 400 nmol kg{sup -1}. The measured nickel ion solubilities were interpreted via a Ni(II) ion hydroxo-and amino-complexing model and thermodynamic functions for these equilibria were obtained from a least-squares analysis of the data. Two solid phase transformations were observed: at temperatures below 149 C, the activity of Ni(II) ions in aqueous solution was controlled by a hydrous Ni(II) oxide (theophrastite) solid phase rather than anhydrous NiO (bunsenite); above 247 C, Ni(II) activities were controlled by cubic rather than rhombohedral bunsenite.

The NMSU group has a lengthy history in the study of the nucleon structure and in particular its spin structure in terms of its fundamental constituents. This line of research is continuing in our current involvement in experiments at Brookhaven National Lab and the Thomas Jefferson National Accelerator Facility.

Here we describe a technique for solving the four-field extended-magnetohydrodynamic (MHD) equations in two dimensions. The introduction of triangular high-order finite elements with continuous first derivatives (C{sup 1} continuity) leads to a compact representation compatible with direct inversion of the associated sparse matrices. The split semi-implicit method is introduced and used to integrate the equations in time, yielding unconditional stability for arbitrary time step. The method is applied to the cylindrical tilt mode problem with the result that a non-zero value of the collisionless ion skin depth will increase the growth rate of that mode. The effect of this parameter on the reconnection rate and geometry of a Harris equilibrium and on the Taylor reconnection problem is also demonstrated. This method forms the basis for a generalization to a full extended-MHD description of the plasma with six, eight, or more scalar fields.

The objective of this calculation is to evaluate the required minimum burnup as a function of initial pressurized water reactor (PWR) assembly enrichment that would permit loading of spent nuclear fuel into the 21 PWR waste package with absorber plates design as provided in Attachment IV. This calculation is an example of the application of the methodology presented in the ''Disposal Criticality Analysis Methodology Topical Report'' (YMP 2003). The scope of this calculation covers a range of enrichments from 0 through 5.0 weight percent U-235, and a burnup range of 0 through 45 GWd/MTU. Higher burnups were not necessary because 45 GWd/MTU was high enough for the loading curve determination. This activity supports the validation of the use of burnup credit for commercial spent nuclear fuel applications. The intended use of these results will be in establishing PWR waste package configuration loading specifications. Limitations of this evaluation are as follows: (1) The results are based on burnup credit for actinides and selected fission products as proposed in YMP (2003, Table 3-1) and referred to as the ''Principal Isotopes''. Any change to the isotope listing will have a direct impact on the results of this report. (2) The results are based …

This report summarizes the work done during the sixth quarter of the project. Effort was directed in three areas: (1) Further development of the model on the role of connectivity on ionic conductivity of porous bodies, including the role of grain boundaries and space charge region. (2) Calculation of the effect of space charge and morphology of porous bodies on the effective charge transfer resistance of porous composite cathodes. (3) The investigation of the three electrode system for the measurement of cathodic polarization using amperometric sensors.

This program evaluated the effects of common manufacturing variables on spike-tempering effectiveness. The investigation used design-of-experiment (DOE) techniques, and examined both dual-phase and martensitic grades of high-strength steels (HSS). The specific grades chosen for this project were: Dual-phase (DP) 600, galvannealed (GA), 1.55 mm (DP) 600; Dual-phase (DP) 980 (uncoated), 1.55 mm (DP) 980; and Martensitic (M) 1300, 1.55 mm (M) 1300. Common manufacturing conditions of interest included tempering practice (quench and temper time), button size, simulated part fitup (sheet angular misalignment and fitup), and electrode wear (increased electrode face diameter). All of these conditions were evaluated against mechanical performance (static and dynamic tensile shear). Weld hardness data was also used to examine correlations between mechanical performance and the degree of tempering. Mechanical performance data was used to develop empirical models. The models were used to examine the robustness of weld strength and toughness to the selected processing conditions. This was done using standard EWI techniques. Graphical representations of robustness were then coupled with metallographic data to relate mechanical properties to the effectiveness of spike tempering. Mechanical properties for all three materials were relatively robust to variation in tempering. Major deviations in mechanical properties were caused by degradation of the …

OAK-B135 This paper investigates the formation and breakup of the ''slinky mode'' in an RFP using analytic techniques previously employed to examine mode locking phenomena in tokamaks. The slinky mode is a toroidally localized, coherent interference pattern in the magnetic field which co-rotates with the plasma at the reversal surface. This mode forms, as a result of the nonlinear coupling of multiple m = 1 core tearing modes, via a bifurcation which is similar to that by which toroidally coupled tearing modes lock together in a tokamak. The slinky mode breaks up via a second bifurcation which is similar to that by which toroidally coupled tearing modes in a tokamak unlock. However, the typical m = 1 mode amplitude below which slinky breakup is triggered is much smaller than that above which slinky formation occurs. Analytic expressions for the slinky formation and breakup thresholds are obtained in all regimes of physical interest. The locking of the slinky mode to a static error-field is also investigated analytically. Either the error-field arrests the rotation of the plasma at the reversal surface before the formation of the slinky mode, so that the mode subsequently forms as a non-rotating mode, or the slinky mode …

The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard …

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2003 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to (1) monitor the migration pathway of water from the burial ground (Plot M) to the handpumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) monitor the presence of radioactive and chemically hazardous materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 …