This report discusses Test Campaign TC07 of the Kellogg Brown & Root, Inc. (KBR) Transport Reactor train with a Siemens Westinghouse Power Corporation (Siemens Westinghouse) particle filter system at the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama. The Transport Reactor is an advanced circulating fluidized-bed reactor designed to operate as either a combustor or a gasifier using a particulate control device (PCD). The Transport Reactor was operated as a pressurized gasifier during TC07. Prior to TC07, the Transport Reactor was modified to allow operations as an oxygen-blown gasifier. Test Run TC07 was started on December 11, 2001, and the sand circulation tests (TC07A) were completed on December 14, 2001. The coal-feed tests (TC07B-D) were started on January 17, 2002 and completed on April 5, 2002. Due to operational difficulties with the reactor, the unit was taken offline several times. The reactor temperature was varied between 1,700 and 1,780 F at pressures from 200 to 240 psig. In TC07, 679 hours of solid circulation and 442 hours of coal feed, 398 hours with PRB coal and 44 hours with coal from the Calumet mine, and 33 hours of coke breeze feed were attained. Reactor operations were problematic due to …

The purpose of this report is to present analogue studies and literature reviews designed to provide qualitative and quantitative information to test and provide added confidence in process models abstracted for performance assessment (PA) and model predictions pertinent to PA. This report provides updates to studies presented in the Yucca Mountain Site Description (CRWMS M&O 2000 [151945], Section 13) and new examples gleaned from the literature, along with results of quantitative studies conducted specifically for the Yucca Mountain Site Characterization Project (YMP). The intent of the natural analogue studies was to collect corroborative evidence from analogues to demonstrate additional understanding of processes expected to occur during postclosure at a potential Yucca Mountain repository. The report focuses on key processes by providing observations and analyses of natural and anthropogenic (human-induced) systems to improve understanding and confidence in the operation of these processes under conditions similar to those that could occur in a nuclear waste repository. The process models include those that represent both engineered and natural barrier processes. A second purpose of this report is to document the various applications of natural analogues to geologic repository programs, focusing primarily on the way analogues have been used by the YMP. This report …

This report summarizes work performed by Argonne National Laboratory on fatigue and environmentally assisted cracking (EAC) in light water reactors (LWRs) from July 2000 to December 2000. Topics that have been investigated include (a) environmental effects on fatigue S-N behavior of primary pressure boundary materials, (b) irradiation-assisted stress corrosion cracking (IASCC) of austenitic stainless steels (SSs), and (c) EAC of Alloys 600 and 690. The fatigue strain-vs.-life data are summarized for the effects of various material, loading, and environmental parameters on the fatigue lives of carbon and low-alloy steels and austenitic SSs. Effects of the reactor coolant environment on the mechanism of fatigue crack initiation are discussed. Two methods for incorporating the effects of LWR coolant environments into the ASME Code fatigue evaluations are presented. Slow-strain-rate tensile tests and posttest fractographic analyses were conducted on several model SS alloys irradiated to {approx}0.9 x 10{sup 21} n {center_dot} cm{sup -2} (E > 1 MeV) in He at 289 C in the Halden reactor. The results were used to determine the influence of alloying and impurity elements on the susceptibility of these steels to IASCC. A fracture toughness J-R curve test was conducted on a commercial heat of Type 304 SS that …

The primary goal of this program is to develop a commercially viable enthalpy exchangers that exhibits performance comparable to state-of-the-art exchangers, meets flammability test standards, supports no biological growth, maintains mechanical integrity for a 10 year life (typical of competitive warrantees) and exhibits a total media raw material cost of approximately 1/5 of that of the competition. The first three program tasks were devoted to: (1) gathering background information on competitors and their methods of manufacturing; (2) establishing experimental and evaluation procedures for the program; (3) identifying potential desiccants, supports and binders to be tested; (4) preparing matrix combinations on a laboratory scale; (5) testing component combinations for equilibrium moisture uptakes at different relative humidities (isotherms) and dynamic moisture adsorption rates; (6) using media adsorption properties to models to predict exchanger performance; (7) estimating ease of manufacture and finished wheel costs; and (8) calculating raw material, wheel and cassette costs based on the best media formulations. Since the rotary enthalpy exchangers have high rotational speeds, uptake rate is at least as important as equilibrium moisture uptake. Therefore, a procedure and apparatus were developed to determine adsorption rate so that the Lewis number (the ratio of mass transfer resistance to heat …

Nijmegen breakage syndrome (NBS) is a rare autosomal recessive chromosome instability syndrome characterized by microcephaly, growth retardation, immunodeficiency, and cancer predisposition, with cellular features similar to that of ataxia telangiectasia (AT). NBS results from mutations in the mammalian gene Nbs1 that codes for a 95-kDa protein called nibrin, NBS1, or p95. To establish an animal model for NBS, we attempted to generate NBS1 knockout mice. However, NBS1 gene knockouts were lethal at an early embryonic stage. NBS1 homozygous(-/-) blastocyst cells cultured in vitro showed retarded growth and subsequently underwent growth arrest within 5 days of culture. Apoptosis, assayed by TUNEL staining, was observed in NBSI homozygous(-/-) blastocyst cells cultured for four days. NBSI heterozygous(+/-) mice were normal, and exhibited no specific phenotype for at least one year. However, fibroblast cells from NBSI heterozygous(+/-) mice displayed an enhanced frequency of spontaneous transformation to anchorage-independent growth as compared to NBS1 wild-type(+/+) cells. Furthermore, heterozygous(+/-) mice exhibited a high incidence of hepatocellular carcinoma after one year compared to wild-type mice, even though no significant differences in the incidence of other tumors such as lung adenocarcinoma and lymphoma were observed. Taken together, these results strongly suggest that NBS1 heterozygosity and reduced NBSI expression induces …

Researchers at the Timken Company conceived a project to develop an on-line instrument for wall thickness measurement of steel seamless mechanical tubing based on laser ultrasonic technology. The instrument, which has been installed and tested at a piercing mill, provides data on tube eccentricity and concentricity. Such measurements permit fine-tuning of manufacturing processes to eliminate excess material in the tube wall and therefore provide a more precisely dimensioned product for their customers. The resulting process energy savings are substantial, as is lowered environmental burden. The expected savings are $85.8 million per year in seamless mechanical tube piercing alone. Applied across the industry, this measurement has a potential of reducing energy consumption by 6 x 10{sup 12} BTU per year, greenhouse gas emissions by 0.3 million metric tons carbon equivalent per year, and toxic waste by 0.255 million pounds per year. The principal technical contributors to the project were the Timken Company, Industrial Materials Institute (IMI, a contractor to Timken), and Oak Ridge National Laboratory (ORNL). Timken provided mill access as well as process and metallurgical understanding. Timken researchers had previously developed fundamental ultrasonic analysis methods on which this project is based. IMI developed and fabricated the laser ultrasonic generation and …

The Lawrence Livermore National Laboratory (LLNL) Site Seismic Safety Program was conceived in 1979 during the preparation of the site Draft Environmental Impact Statement. The impetus for the program came from the development of new methodologies and geologic data that affect assessments of geologic hazards at the LLNL site; it was designed to develop a new assessment of the seismic hazard to the LLNL site and LLNL employees. Secondarily, the program was also intended to provide the technical information needed to make ongoing decisions about design criteria for future construction at LLNL and about the adequacy of existing facilities. This assessment was intended to be of the highest technical quality and to make use of the most recent and accepted hazard assessment methodologies. The basic purposes and objectives of the current revision are similar to those of the previous studies. Although all the data and experience assembled in the previous studies were utilized to their fullest, the large quantity of new information and new methodologies led to the formation of a new team that includes LLNL staff and outside consultants from academia and private consulting firms. A peer-review panel composed of individuals from academia (A. Cornell, Stanford University), the Department …

Typical state of the art atmospheric general circulation models used in climate change studies have horizontal resolution of approximately 300 km. As computing power increases, many climate modeling groups are working toward enhancing the resolution of global models. An important issue that arises when resolution of a model is changed is whether cloud and convective parameterizations, which were developed for use at coarser resolutions, will need to be reformulated or re-tuned. We propose to investigate this issue and specifically cloud statistics using ARM data. The data streams produced by highly instrumented sections of Cloud and Radiation Testbeds (CART) of ARM program will provide a significant aid in the evaluation of cloud and convection parameterization in high-resolution models. Recently, we have performed multiyear global-climate simulations at T170 and T239 resolutions, corresponding to grid cell sizes of 0.7{sup 0} and 0.5{sup 0} respectively, using the NCAR Community Climate Model. We have also a performed climate change simulation at T170. On the scales of a T42 grid cell (300 km) and larger, nearly all quantities we examined in T170 simulation agree better with observations in terms of spatial patterns than do results in a comparable simulation at T42. Increasing the resolution to T239 …

Low-defect multilayer coatings are required to fabricate mask blanks for Extreme Ultraviolet Lithography (EUVL). The mask blanks consist of high reflectance E W multilayers on low thermal expansion substrates. A defect density of 0.0025 printable defects/cm{sup 2} for both the mask substrate and the multilayer is required to provide a mask blank yield of 60%. Current low defect multilayer coating technology allows repeated coating-added defect levels of 0.05/cm{sup 2} for defects greater than 90 nm polystyrene latex sphere (PSL) equivalent size for lots of 20 substrates. Extended clean operation of the coating system at levels below 0.08/cm{sup 2} for 3 months of operation has also been achieved. Two substrates with zero added defects in the quality area have been fabricated, providing an existence proof that ultra low defect coatings are possible. Increasing the ion source-to-target distance from 410 to 560 mm to reduce undesired coating of the ion source caused the defect density to increase to 0.2/cm{sup 2}. Deposition and etching diagnostic witness substrates and deposition pinhole cameras showed a much higher level of ion beam spillover (ions missing the sputter target) than expected. Future work will quantify beam spillover, and test designs to reduce spillover, if it is confirmed …

Report documenting the partnership between DOEs Office of Industrial Technologies and the U.S. glass industry.

Green power marketing--the act of differentially selling electricity generated wholly or in part from renewable sources--has emerged in more than a dozen countries around the world. This report reviews green power marketing activity abroad to gain additional perspective on consumer demand and to discern key factors or policies that affect the development of green power markets. The objective is to draw lessons from experience in other countries that could be applicable to the U.S. market.

The goal of this demonstration was to show that it is possible to generate electronic signals that can accurately mimic the signals that are produced by a high-purity germanium (HPGe) gamma-ray detector. As an example of this fidelity, we decided to show that it was possible to perform a complex, multiplet-resolution analysis of a portion of the spectrum acquired from the gamma-ray spectrum synthesizer. We further showed that the results of this analysis were consistent with what would be obtained from a spectrum acquired from a real plutonium source and a real HPGe detector. The gamma-ray synthesizer used in the JRC Ispra demonstration was our first laboratory prototype. In this version of the synthesizer we produced signals that mimicked the output of an HPGe detector preamplifier. Although not shown at Ispra, we have also demonstrated that we can produce signals that mimic the signals produced in the detector itself.

A hybrid configuration of a heat capacity laser (HCL) and a moving slab laser (MSL) has been studied. Multiple volumes of solid-state laser material are sequentially diode-pumped and their energy extracted. When a volume reaches a maximum temperature after a ''sub-magazine depth'', it is moved out of the pumping region into a cooling region, and a new volume is introduced. The total magazine depth equals the submagazine depth times the number of volumes. The design parameters are chosen to provide high duty factor operation, resulting in effective use of the diode arrays. The concept significantly reduces diode array cost over conventional heat capacity lasers, and it is considered enabling for many potential applications. A conceptual design study of the hybrid configuration has been carried out. Three concepts were evaluated using CAD tools. The concepts are described and their relative merits discussed. Because of reduced disk size and diode cost, the hybrid concept may allow scaling to average powers on the order of 0.5 MW/module.

Two different structural solutions have been proposed and studied for the D0 Run2b stave (Figure 1 and Figure 3). The way the stave structural stiffness is achieved in both designs is essentially the same: the structural material is displaced as far as possible from the neutral axis in order to increase the bending moment of the stave. The agreement of the measured data with what has been theoretically predicted is excellent. The C channel stave with dog-bones glued on top of the sensor (stave No.2) has outperformed the other mockups with a predicted sag of 51 {micro}m for a distributed load of 2.28 N/m [0.013 lbf/in] and a consequent natural frequency of 89.2Hz. The other three C channel staves with the dog-bones not glued on the sensor have a bending stiffness that is -19.0%, -10.8%, +4.0% of that of stave No.2, being 11.0%, 7.8%, 15.1% lighter respectively. An optimized stave structural proposal with 130.5% of the design stiffness within the mass budget is presented at the end of this paper.

The main objective of this study is to perform nonlinear dynamic earthquake time history analyses on Morrow Point Dam, which is located 263 km southwest of Denver, Colorado. This project poses many significant technical challenges, one of which is to model the entire Morrow Point Dam/Foundation Rock/Reservoir system which includes accurate geology topography. In addition, the computational model must be initialized to represent the existing dead loads on the structure and the stress field caused by the dead loads. To achieve the correct dead load stress field due to gravity and hydrostatic load, the computer model must account for the manner in which the dams were constructed. Construction of a dam finite element model with the correct as-built geometry of the dam structure and simply ''turning on'' gravity in the computer model will generally lead to an incorrect initial stress field in the structure. The sequence of segmented lifts typical of dam construction has a significant impact on the static stress fields induced in the dam. In addition, the dam model must also account for the interaction between the adjacent dam segments across the dam contraction joints. As a result of these challenges, it was determined that a significant amount …

Major scientific and technological breakthroughs played a pivotal role in our ability to win the Cold War. The possibility of a different type of war, in response to terrorism, has long been recognized. Indeed, countermeasures to address specific terrorist acts have been developed and are deployed, for example, at special sporting and political events. The current threat environment, however, has created an intense and compelling set of concerns; consequently, the challenge to the scientific Community to develop new concepts and products on an accelerated timeframe is clear. Also, the spectrum of terrorist threats is broad. It includes the use of conventional, chemical, biological, and nuclear and radiological weapons, not to mention cyber-based attacks. The imperatives for advances have been amplified now that attacks are clearly possible within the U.S. borders. For example, advanced sensors and detectors that are able to monitor the proliferation of all the above warfare agents and their movement at entry points into the U.S. are clearly needed. The investments over the last decades in research and development efforts at the U.S. Department of Energy (DOE) national laboratories in nonproliferation have led unique technologies and detection capabilities that have proved useful; yet, many challenges remain. In particular, …

Since October 2001 the development of the facility diagnostics for NIF has been funded by the NIF Director through the National NIF Diagnostic Program (NNDP). The current emphasis of the NNDP is on diagnostics for the early NIF quad scheduled to be available for experiment commissioning in FY03. During the past six months the NNDP has set in place processes for funding diagnostics, developing requirements for diagnostics, design reviews and monthly status reporting. Those processes are described in an interim management plan for diagnostics (''National NIF Diagnostic Program Interim Plan'', NIF-0081315, April 2002) and a draft Program Execution Plan (''Program Execution Plan for the National NlF Diagnostic Program'', NIF-0072083, October 2001) and documents cited therein. Work has been funded at Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Naval Research Laboratory (NRL), Sandia National Laboratories (SNL), Bechtel Nevada at Los Alamos and Santa Barbara. There are no major technical risks with the early diagnostics. The main concerns relate to integration of the diagnostics into the facility, all such issues are being worked. This report is organized to show the schedule and budget status and a summary of Change Control Board actions for the past six months. The following …

It is peculiar that in situ hybridization (ISH), a technique with many similarities to immunohistochemistry (IHC), has not enjoyed the phenomenal growth in both basic research and clinical applications as has its sister technique IHC. Since the late 1970s, when immunoperoxidase techniques began to be applied to routine diagnostic material and to numerous research applications, there has been a natural evolution of the IHC procedure. Namely, only a few primary antibodies were available commercially at the onset, and only one indirect and the peroxidase-antiperoxidase (PAP) technique detection systems were in place. With the advent of avidin-biotin detection systems and monoclonal antibodies, and a viable commercial market, extraordinary growth of the procedure's applications in clinical research and diagnostic pathology occurred during the subsequent two decades. Today, IHC is automated and widely used for research purposes and, to a large extent, has become a routine diagnostic ''special stain'' in most clinical laboratories. During the same period, ISH enjoyed very little growth in both research and diagnostic applications. What has accounted for this lack of maturation of the technique? The success of IHC is part of the reason measuring a gene's encoded protein routinely and inexpensively, particularly as automation evolved, rendered IHC a …

A detailed description of the history of EPAct's State & Alternative Fuel Provider Program and what fleets need to do to comply to its regulations.

Safety issues related to thermal cook-off are important for handling and storing explosive devices. Violence of event as a function of confinement is important for prediction of collateral events. There are major issues, which require an understanding of the following events: (1) transit to detonation of a pressure wave from a cook-off event, (2) sensitivity of HMX based explosives changes with thermally induced phase transitions and (3) the potential danger of neighboring explosive devices being affected by a cook-off reaction. Results of cook-off events of known size, confinement and thermal history allows for development and/or calibrating computer models for calculating events that are difficult to measure experimentally.

In filled PDMS based composites, such as M97XX stress cushions, significant mechanical reinforcement of the polymer component is obtained from hydrogen bonding between the silica filler surface hydroxyls and the siloxane polymer backbone. It is expected that these interactions are influenced by the amount and structure of interfacial water. We have chosen to investigate in detail the effect of chemisorbed and physisorbed water on the interfacial structure and dynamics in silica-filled PDMS-based composites. Toward this end, we have combined classical molecular dynamics simulations and experimental studies employing nanoindentation, temperature programmed desorption (TPD), Dynamic Mechanical Analysis (DMA), and Nuclear Magnetic Resonance (NMR) analyses. Our TPD results suggest that moisture desorption and adsorption in M9787 can be approximated by the interaction of its silica constituents (Cab-0-Sil-M-7D and Hi-Sil-233) with moisture. Our experimental data also reveal that, in general, as heat-treated silica particles are exposed to moisture, chemisorbed states, then physisorbed states are gradually filled up in that order. Molecular modeling results suggest that the polymer-silica contact distance and the mobility of interfacial polymer chains significantly decreased as the hydration level at the interface was reduced. The reduced mobility of the PDMS chains in the interfacial domain reduced the bulk motional properties of …

Researchers at Lawrence Livermore National Laboratory are developing means to collect and identify fluid-based biological pathogens in the forms of proteins, viruses, and bacteria. To support detection instruments, we are developing a flexible fluidic sample preparation unit. The overall goal of this Microfluidic Module is to input a fluid sample, containing background particulates and potentially target compounds, and deliver a processed sample for detection. We are developing techniques for sample purification, mixing, and filtration that would be useful to many applications including immunologic and nucleic acid assays. Sample preparation functions are accomplished with acoustic radiation pressure, dielectrophoresis, and solid phase extraction. We are integrating these technologies into packaged systems with pumps and valves to control fluid flow and investigating small-scale detection methods.

The BEFlux VAP directly compares data from the three Normal Incidence Perheliometers, shaded pyranometers, and shaded pyrgeometers at the SGP CF. Extensive analysis with several years of data has produced limits of typical ranges of agreement when these instruments are performing as expected. These limits are used to screen the data, and then the average is taken of the two that agree best, given that at least two instruments agree to within the established limits. This is done for the downwelling direct normal and diffuse shortwave, and the downwelling longwave. The total (global) downwelling shortwave is then the sum of the direct and diffuse components.

N/A