A discussion is given of possible septum magnet parameters for small production angle experiments in the ISABELLE storage rings. Superconducting septa and torroidal septa are also considered. (PMA)

A simple analytic method is developed, based on physical approximations, for treating transient implosive longitudinal compression of bunches of heavy ions in an accelerator system for ignition of inertial-confinement fusion pellet targets. Parametric dependences of attainable compressions and of beam path lengths and times during compression are indicated for ramped pulsed-gap lines, rf systems in storage and accumulator rings, and composite systems, including sections of free drift. It appears that for high-confidence pellets in a plant producing 1000 MW of electric power the needed pulse lengths cannot be obtained with rings alone unless an unreasonably large number of them are used, independent of choice of rf harmonic number. In contrast, pulsed-gap lines alone can meet this need. The effects of an initial inward compressive drift and of longitudinal emittance are included.

This document contains copies of viewgraphs discussed in a presentation made at the Fifth Annual Power Conference, August 29 to September 2, 1977. No text. 19 figures, 11 references.

Reports and articles on decommissioning have been reviewed to determine the current technology status and also attempt to identify potential decommissioning problem areas. It is concluded that technological road blocks, which limited decommissioning facilities in the past have been removed. In general, techniques developed by maintenance in maintaining the facility have been used to decommission facilities. Some of the more promising development underway which will further simplify decommissioning activities are: electrolytic decontamination which simplifies some decontaminating operations; arc saw and vacuum furnace which reduce the volume of metallic contaminated material by a factor of 10; remotely operated plasma torch which reduces personnel exposure; and shaped charges, water cannon and rock splitters which simplify concrete removal. Areas in which published data are limited are detailed costs identifying various components included in the total cost and also the quantity of waste generated during the decommissioning activities. With the increased awareness of decommissioning requirements as specified by licensing requirements, design criteria for new facilities are taking into consideration final decommissioning of buildings. Specific building design features will evolve as designs are evaluated and implemented.

A new class of numerical algorithms for computer simulation of low frequency electromagnetic and electrostatic phenomena in magnetized plasma is presented. Maxwell's equations are solved in the limits of quasineutrality and negligible transverse displacement current (Darwin's model). Electrons are modeled as a fluid with polarization effects ignored. Ions are described as particles. A novel feature of these algorithms is the use of the electron fluid equation of motion to determine the electric field, which renders these numerical schemes remarkably simple and direct. The simulation plasma is either periodic or bounded by particle reflecting conducting walls. Both fully nonlinear codes with spatial grids and linearized gridless codes have been implemented.

Fluidized bed incineration and waste fixation processes are being used to process the types of wastes expected from nuclear fuel reprocessing and production plants. Test incineration runs have been made on two types of wastes: high efficiency particulate air (HEPA) filters and tributyl phosphate-solvent solutions. Laboratory-scale vitrification equipment was used to produce glass pellets from incinerator ash and blends of other expected waste streams. Computer modeling gave an expected product integrity life of over 2,000 years.

Time-dependent deformation and time-dependent strength are being characterized for several candidate polymeric composites for flywheels. This presentation highlights the motivation and the philosophy of the characterization adopted by the authors in establishing the ongoing programs at LLL. This overview is intended to provide a basis for inferring the type of enginering data being generated for different aspects of flywheel design. The details of these data can be obtained from the published reports and articles. Two aspects of flywheel design data are addressed: those dealing with time-dependent statistical strength, and those dealing with deformation and strength under time-varying history.

The status of the following studies is reported: low cost current collector development, high temperature operation, catalytic electrode development, low cost polymer development, evaluation of the effect of hydrogen enrichment on older gas pipelines, cell and SPE optimization, cell assembly design, stack assembly design, manufacturing process development, and system analysis and definition.

Information related to sodium fires and fission products in LMFBR type reactors is presented concerning SOMIX code development; sodium jet dispersal tests; aerosol leakage; high temperature-concentration aerosol tests; aerosol source term size; and properties of high temperature fuel mixtures.

Measurements have been made of the electrical resistivity, the acoustic wave speed, density, and water content of six groups of rock samples taken from Cenozoic volcanic units. It has been found from these measurements that the correlations between physical properties are significantly different in the case of volcanic rocks than in the case of sandstones and limestones. For a given porosity and water content, the resistivity of a volcanic rock is several fold greater than that of a sandstone or limestone. Also, there is a weaker correlation between acoustic wave speed and porosity in volcanic rocks than in sandstones and limestones. The effect of temperature on the properties of these rocks appears to be predictable from fundamental considerations to temperatures as high as 100/sup 0/C.

The past, present, and future thrusts of the magnetic mirror fusion program at LLL are reviewed. Neutral beam injection, stabilization, and density-lifetime product results from the 2XIIB experiment are briefly highlighted. The rationale of the Tandem Mirror Experiment and Field Reversed Mirror Experiment now under way are discussed. Plans for the Mirror Fusion Test Facility (MFTF) are described. Approaches to improvement of particle containment in mirror fusion systems are briefly indicated. (RME)

Participants from thirteen member nations of the International Energy Agency and the Commission of European Communities have been conducting cooperative energy systems analyses, the goal of which is to evaluate the possible impacts of new and conservation technologies. Such studies are intended to provide analytical bases to aid future decisions on cooperative research and development projects. In the initial studies, a quantitative description of the 1974 energy system has been prepared for each participating nation. The nations accounted for approximately half of the world energy consumption in 1974. They imported more than 30 percent of their primary energy requirements from other nations of the world. Oil and natural gas supplied almost /sup 3///sub 4/ of the energy. Reference projections were made for the years 1985 and 2000 to provide base cases for studies of the impacts of new and conservation technologies. Although these projections are not intended to be forecasts, taken together they indicate an increasing gap between the demand for energy and foreseeable domestic supplies, thus underscoring the urgency for the vigorous introduction of new energy technologies as well as the need for strong efforts in energy conservation. Some preliminary evaluations of selected technologies were made as a function …

This report describes the use of noise analysis to investigate in-core instrument tube vibrations in BWR-4 reactors. Neutron noise signals from in-core fission chambers and acoustic noise signals from externally mounted accelerometers were used in these studies. The results show that neutron noise can be used to detect vibration and, more importantly, impacting of instrument tubes against adjacent fuel channel boxes. Externally mounted accelerometers detect impacting but not rubbing of instrument tubes against fuel channel boxes. Accelerometers can monitor impacting only on the particular instrument tube where the accelerometer is mounted. Surveillance for instrument tube impacts can be accomplished using standard BWR-4 in-core power range neutron flux detectors at all instrument tube locations containing these detectors. Ex-vessel accelerometers can then be used to monitor instrument tubes that lack power range neutron flux detectors. However, noise on axial flux profiles obtained with movable in-core detectors is not a reliable indicator of impacting, because the recorder used to plot the flux profiles does not respond adequately to the noise frequency generated by impacting.

Two ''plugs'' of dense plasma at either end of a central solenoid cell form the basis of a new mirror fusion power plant concept. A central cell blanket design is presented. Modules on crawler tracks serviced by remote welding and handling machines of very simple design are important features resulting from linear axisymmetric geometry. Three blanket designs are considered and the best one presented in some detail. It has lithium as the breeder material, helium cooled. ''Plug'' magnet field strengths must be high. A novel magnet is presented to satisfy the physics of the end plugs. Beam sources at 1,200 KV present special problems. Methods of voltage standoff, arc damage control, and neutralization are discussed. New secondary containment ideas are presented to allow removable roof sections of balanced design.

Vacuum pumping by freezing out or otherwise immobilizing the pumped gas is an old concept. In several plasma physics experiments for controlled fusion research, cryopumping has been used to provide clean, ultrahigh vacua. Present day fusion research devices, which rely almost universally upon neutral beams for heating, are high gas throughput systems, the pumping of which is best accomplished by cryopumping in the high mass-flow, moderate-to-high vacuum regime. Cryopumping systems have been developed for neutral beam injection systems on several fusion experiments (HVTS, TFTR) and are being developed for the overall pumping of a large, high-throughput mirror containment experiment (MFTF). In operation, these large cryopumps will require periodic defrosting, some schemes for which are discussed, along with other operational considerations. The development of cryopumps for fusion reactors is begun with the TFTR and MFTF systems. Likely paths for necessary further development for power-producing reactors are also discussed.

This document contains information on (1) the hydraulic conductivity of salt; (2) the various types of naturally occurring salt solution collapse features, and (3) the rate of formation of solution cavities in salt. (LK)

This report summarizes a collection of, synthesis of, and speculation on the geophysical and geochemical models of the earth's stable shields and rift zones. Two basic crustal types, continental and oceanic, and two basic mantle types, stable and unstable, are described. It is pointed out that both the crust and upper mantle play a strongly interactive role with surface geological phenomena ranging from the occurrence of mountains, ocean trenches, oceanic and continental rifts to geographic distributions of earthquakes, faults, and volcanoes. On the composition of the mantle, there is little doubt regarding the view that olivine constitutes a major fraction of the mineralogy of the earth's upper mantle. Studies are suggested to simulate the elasticity and composition of the earth's lower crust and upper mantle.

Six major problem areas have surfaced in the past twenty-five years concerning the use of plutonium tankage. The most significant of these involves the use of borosilicate glass as a neutron absorber. Approximately thirty recommendations and criteria resulted from a study of these problem areas. Not all of the criteria and recommendations are unanimously supported by all members of the committee. The committee agrees that problem areas that can be handled on a short-term basis are being pursued expeditiously. Most of the criteria presented will apply to new tankage to be installed. The committee also noted fourteen accomplishments in the last 1/sup 1///sub 2/ years directed to the application of the criteria.

Space charge as it affects ion beam transport is reviewed. The approach here will be to derive beam-current criteria for divergence from space charge, review recent theoretical models for fractional space-charge neutralization, discuss space-charge-related observations on ion-beam transport in a specific experimental system, and briefly note several applications using space charge. Experimental measurements of effective space charge are discussed for a dc ion-source test stand using a 90/sup 0/ double-focusing magnet for species separation and for a solenoidal lens magnet for trim focus of the ion beam preparatory to entrance into a 400-kV accelerator column.

The practical effects of blistering and flaking in neutral injection systems are studied. These effects will soon be more important because of energy increases in systems now under development and because of their operation with fast helium ions as well as hydrogen and deuterium ions. Two main effects were studied: enhanced erosion rate and possible voltage breakdown from sharp flakes and gas emission.

Fluids from various formations were sampled and analyzed in order to characterize groundwaters in the Delaware Basin. Waters were analyzed for solute content and/or stable isotope ratios (D/H and /sup 18/O//sup 16/O). Three lines of geochemical arguments are summarized, in order to present the natures and probable origins of analyzed fluids: solute chemistry, thermodynamic modelling of low-temperature aqueous species, and stable isotope ratios. (JGB)

A series of 12 irradiation experiments was designed to evaluate the creep characteristics of graphites when exposed to elevated temperatures and high fast fluences. Various graphites of interest to HTGR designers are to be examined. The series encompasses the irradiation of 28 specimens, each 15.24 mm (0.6 in.) in diameter by 25.4 mm (1 in.) long, to incremental exposures of 1, 2, 4, and 8 E + 25 n/m/sup 2/ (E greater than 0.18 MeV) at 900/sup 0/C; 28 similar specimens to the same exposures at 600/sup 0/C; and 28 others at 1250/sup 0/C. A compressive stress of 13.79 MPa (2000 psi) is applied to 20 of the specimens in each test by means of a metal bellows, which is expanded by gas pressure against the specimen columns; 8 of the stacked specimens are stressed to 20.68 MPa (3000 psi) by a reduction in diameter. The report describes special features of the capsules, which include (1) movable centerline thermocouples to measure the temperature profile along the axes of the capsule, (2) special linear variable differential transformer-type load cells to monitor the applied load, and (3) a computerized temperature control system designed to provide accurate longitudinal temperatures over the 0.508-m (20-in.) …

The examination of drill cuttings and core samples from the Magmamax Nos. 2 and 3 and Woolsey No. 1 wells indicate that the sequence of sedimentary rocks in the Salton Sea geothermal field from the surface to below 4000 ft can be divided into three categories: cap rock, unaltered reservoir rocks, and hydrothermally altered reservoir rocks. The cap rock extends from the surface to a depth of approximately 1100 ft in all three wells. There is evidence to suggest that the cap rock has undergone self-sealing through time as a result of the circulation of hot brine through the rocks. Essentially unaltered reservoir rocks extend from a depth of 1100 ft to approximately 3000 ft. The mineralogical and textural changes that occur at depth can be attributed to the process of hydrothermal alteration. Alteration has occurred in a chemically open system and the important variables in the alteration scheme have been temperature, permeability, brine composition, and rock composition. The transition from unaltered to altered reservoir rocks is marked by the replacement of calcite by epidote. The first appearance of epidote correlates reasonably well with the top of the alteration zone as determined in other studies by electric log analysis. Biotite …

The increasing demand for uranium as reactor fuel requires the addition of sizable new domestic reserves. One of the largest potential sources of low-grade uranium ore is the Chattanooga shale--a formation in Tennessee and neighboring states that has not been mined conventionally because it is expensive and environmentally disadvantageous to do so. An in situ process, on the other hand, might be used to extract uranium from this formation without the attendant problems of conventional mining. We have suggested developing such a process, in which fracturing, retorting, and pressure leaching might be used to extract the uranium. The potential advantages of such a process are that capital investment would be reduced, handling and disposing of the ore would be avoided, and leaching reagents would be self-generated from air and water. If successful, the cost reductions from these factors could make the uranium produced competitive with that from other sources, and substantially increase domestic reserves. A technical program to evaluate the processing problems has been outlined and a conceptual model of the extraction process has been developed. Preliminary cost estimates have been made, although it is recognized that their validity depends on how successfully the various processing steps are carried out. …