The transposed critical temperature (TPCT) is shown to be an extremely important thermodynamic property in the selection of working fluids and turbine states for geothermal power plants operating on a closed organic (binary) Rankine cycle. When the optimum working fluid composition and process states are determined for specified source and sink conditions, turbine inlet states consistently lie adjacent to the working fluids' TPCT line for all resource temperatures, constraints, and cost and efficiency factors investigated.

The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the San Angelo National Topographic Map NH14-1 are presented. The airborne data gathered are reduced by ground computer facilities to yield profile plots of the basic uranium, thorium, and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included, with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included.

The Savannah River Plant and Laboratory employ more than 16,000 people. When the separate Publications Divisions of the Plant and Laboratory were combined it was determined that a single source of information for using terms was needed, and that the source would take the form of a word list. The Word List was issued to more than 5000 employees onsite. In addition, the Word List is being added to the site computer network as a reference document and as an online spelling checker where more than 2000 employees will have access to it through their personal computers.

Information is presented concerning the reactor vessel; reactivity control mechanisms and instrumentation; reactor internals; primary coolant circuits;core auxiliary cooling system; reactor core; systems engineering; and reactor safety and reliability;

The decays of charm mesons are described in terms of quark-diagram amplitudes. Experimental implications of these amplitudes are also discussed.

Inclusive and exclusive measurements of psi radiative decay are presented. The magnitude of hard inclusive radiative decay is comparable to the prediction f first order QCD, but the measured spectrum is considerably softer. In addition to measurements of radiative decays to the known pseudoscalar and tensor mesons, a sizable decay to a resonance of mass 1440/sub -15//sup +10/ MeV/c/sup 2/ in the K anti K..pi.. mode is observed. This may be the E(1420) meson. Supporting evidence is presented for the existence of the n/sub c/ at a mass of 2980 MeV/c/sup 2/.

The current design configurations of the core assemblies for the gas-cooled fast reactor (GCFR) demonstration plant reactor core conceptual design are described. Primary emphasis is placed upon the design innovations that have been incorporated in the design of the core assemblies since the establishment of the initial design of an upflow GCFR core. A major feature of the design configurations is that they are prototypical of core assemblies for use in commercial plants; a larger number of the same assemblies would be used in a commercial plant.

During late summer and early fall of 1988, the Washington Department of Natural Resources, Division of Geology and Earth Resources (DGER) completed drilling eight shallow geothermal gradient test wells in the southern Washington Cascade Range. This report describes the preliminary results of the 1988 drilling and gradient measuring, and summarizes our current perspectives on distribution and magnitude of the geothermal resource potential in the southern Washington Cascades. 18 refs., 11 figs., 11 tabs.

Impurities in the Tandem Mirror Experiment (TMX) have been studied using extreme ultraviolet spectroscopy. Three time-resolving absolutely-calibrated normal-incidence monochromators, one on each section of TMX, were used to study the impurity emissions in the wavelength range of 300 A to 1600 A. The instruments on the east end cell and central cell were each capable of obtaining spatially-resolved profiles from 22 chords of the plasma simultaneously while the instrument on the west end cell monitored the central chord. The impurities identified in TMX were carbon, nitrogen, oxygen, and titanium. Emphasis was placed upon determining the impurity densities and radiated power losses of the central cell; results indicate that the impurity concentrations were low - less than 0.4% for each species - and that less than 10% of the total net trapped neutral beam power was lost to radiation. The use of titanium gettering on the central cell walls was observed to decrease the brightnesses of singly- and doubly-ionized carbon and oxygen in the central cell plasma. In the end cells, oxygen was the main impurity with a concentration of about 1.5% and was injected by the neutral beams; the other impurities had concentrations of about 0.5%. Radiation losses from the …

Ion cyclotron resonance heating (ICRH) was evaluated and it was found to be satisfactory for use in establishing the conditions necessary to form a thermal barrier in TMX-upgrade (TMX-U). We discuss the constraints that must be satisfied in order to maintain a plasma, and outline a complete startup scenario that ends with the plasma at design parameters. The detailed discussions in this report concentrate on those parts of startup where ICRH is necessary. The ability of ICRH to couple power into a plasma at the fundamental ion cyclotron resonance, w/sub ci/, is determined from experiments with a half-turn loop antenna in the Phaedrus tandem mirror central cell. From these experiments, we get the empirical scaling that shows power deposited in the plasma is proportional to the plasma density.

Extensive source terms for beta, gamma, and neutrons following fission pulses are presented in various tabular and graphical forms. Neutron results from a wide range of fissioning nuclides (42) are examined and detailed information is provided for four fuels: /sup 235/U, /sup 238/U, /sup 232/Th, and /sup 239/Pu; these bracket the range of the delayed spectra. Results at several cooling (decay) times are presented. For ..beta../sup -/ and ..gamma.. spectra, only /sup 235/U and /sup 239/Pu results are given; fission-product data are currently inadequate for other fuels. The data base consists of all known measured data for individual fission products extensively supplemented with nuclear model results. The process is evolutionary, and therefore, the current base is summarized in sufficient detail for users to judge its quality. Comparisons with recent delayed neutron experiments and total ..beta../sup -/ and ..gamma.. decay energies are included. 27 refs., 47 figs., 9 tabs.

A continuous duty cryopump system was designed and developed that comprises a self-contained cryopump for installation into a vacuum chamber, and a microprocessor controller for automatic operation. This deuterium pump has two units in a single housing, arranged so that one is pumping while the other is being regenerated. Liquid helium-cooled, finned sections in each unit pump deuterium by condensation, and a third pump integral within the cryopump housing collects the regenerated gas. A microprocessor unit controls distribution of liquid and gaseous helium, used for conditioning the pumping units, and operates remote actuators for the regeneration. Software provides fully automatic, timed sequencing of the repetitive cryopump events which include: cooldown of the pumping units, opening of the louvers isolating the unit from the vacuum chamber, closing of the louvers, and warming up of the unit for regeneration. Default values in the software can be reprogrammed by the operator through the keyboard in response to prompts displayed on the computer. An override allows the operator to control the cryopump manually by activating switches on a control panel. Interlocks to prevent cryogen lockup are included in the software.

The Savannah River Plant has 28 ponds and 190 Carolina Bays on its 192,000-acreite. Excluding the Par Pond system, the mean pond area is 17.6 acre, with a range of 0.4 to 202.8 acres. Par Pond is the largest pond, with an area of 2500 acres. The mean Carolina Bay area is 6.6 acres, with a range of less than 0.3 to 124.0 acres. The geographical location of each pond and bay has been digitized and can be graphically displayed by computer. This capability will facilitate identification of wetland areas as required by Executive Order 11990 (Protection of Wetlands, May 24, 1977).

Geothermal development in The Geysers KGRA has affected local public services and fiscal resources in Sonoma, Lake, Mendocino, and Napa counties. Each of these counties underwent rapid population growth between 1970 and 1980, some of which can be attributed to geothermal development. The number of workers currently involved in the various aspects of geothermal development in The Geysers is identified. Using three different development scenarios, projections are made for the number of power plants needed to reach the electrical generation capacity of the steam resource in The Geysers. The report also projects the cumulative number of workers needed to develop the steam field and to construct, operate, and maintain these power plants. Although the number of construction workers fluctuates, most are not likely to become new, permanent residents of the KGRA counties. The administrative and public service costs of geothermal development to local jurisdictions are examined and compared to geothermal revenues accruing to the local governments. Revenues do not cover the immediate fiscal needs resulting from increases in local road maintenance and school enrollment attributable to geothermal development. Several mitigation options are discussed, and a framework is presented for calculating mitigation costs per unit of public service.

The fourth Quarterly Technical Progress Report presents the results of work accomplished during the period February 6 through April 30, 1989. the overall objective of the program is the development of a pulsed atmospheric, fluidized bed combustion (PAFBC) technology to burn coal and to provide heat and steam to commercial, institutional, and small industrial applications at a reasonable price in an environmentally acceptable manner. During this past quarter, a baseline for comparing PAFBC vs. AFBC performance was established and the initial series of PAFBC coal-fired combustion tests was completed. The AFBC baseline was representative of bubbling bed units with the exception of emissions which were somewhat higher and attributable to the size constraints of the AFBC unit. However, it still provided a valid baseline for referencing and optimizing PAFBC performance. Initial coal combustion tests in the pulsed fluid-bed verified enhanced performance in comparison to the non-pulsed beds, providing reduced NO{sub x}, CO, and SO{sub 2} emissions as well as higher steam generation rates and considerably lower entrainment losses. 9 figs., 4 tabs.

The following information about the Savannah River is tabulated: significant activities and discharges along the Savannah River, river water temperature data near Jackson st Savannah River Plant, flow informatiom, and reservoir parameters for Clarks Hill, Richard B. Russell and Hartwell reservoirs.

A one-and-a-quarter-dimensional transport code, which includes radial as well as some two-dimensional effects for field-reversed configurations, is described. The set of transport equations is transformed to a set of new independent and dependent variables and is solved as a coupled initial-boundary value problem. The code simulation includes both the closed and open field regions. The axial effects incorporated include global axial force balance, axial losses in the open field region, and flux surface averaging over the closed field region. Input, output, and structure of the code are described in detail. A typical example of the code results is also given. 20 refs., 21 figs., 7 tabs.

This thesis describes the results of a search for new leptons with associated heavy neutrinos. The search uses 68.1 pb/sup /minus/1/ of data taken with the TPC2..gamma.. detector at the PEP storage ring. New lepton pairs with charged lepton masses m/sub L/ < 12 GeV and mass differences in the approximate range 0.4 GeV < m/sub L/ /minus/ m/sub/nu/L/ < 2.5 GeV are excluded at the 99% confidence level. Results are also given of a study of search techniques for the region m/sub L/ < 12 GeV, m/sub L/ /minus/ m/sub ..nu..L/ < 0.4 GeV.

The objectives of the research are (1) evaluate the potential of FT-IR for qualitative functional group detection in chromatographic fractions of highly polar materials, (2) develop separation techniques with the aid of FT-IR detection for concentration of oxygen, nitrogen and sulfur functionalities in synfuels, (3) describe and quantify the various heteroatom functionalities in selected solvent refined coal fractions, (4) place speciation techniques on-line with chromatographic separations, (5) compare quantitative speciation information obtained from LC-FTIR with established fluorine tagging techniques regarding model compounds and synfuels. 23 figures, 5 tables.

The University of Tennessee Space Institute (UTSI) reports on significant activity, task status, planned research, testing, development, and conclusions for the Magnetohydrodynamics (MHD) Coal-Fired Flow Facility (CFFF) and the Research and Development Laboratory. Although slowed by incessant rain during several days, work on the CFFF Bid Packages progressed to nearly 100 percent completion, excluding later punchlist items. On the quench system, the cyclone separator was delivered to UTSI, and under Downstream Components, the secondary combustor was received and the radiant slagging furnace was emplaced at the CFFF. Water quality analysis of Woods Reservoir provided the expected favorable results, quite similar to last year's. Generator experiments describing local current distribution are reported along with behavior under conditions of imposed leakage. Also, during the Quarter, the shelter for the cold flow modeling facility was constructed and circuits installation begun. A jet turbine combustor was tested for use as a vitiation burner. Samples taken from the exhaust duct, besides other applications, show that the refractories used are performing well in alleviating heat loss while exhibiting acceptable degredation. A new resistive power take-off network was designed and implemented.

The feasibility of developing a microwave diagnostic system for measurement of bubbles in a fluidized bed combustion system has been experimentally investigated. Experiments were performed in a simple waveguide geometry, using microwave frequencies from 2.4 to 3.9 GHz. Styrofoam spacers were used to simulate bubbles in bed materials, such as Greer limestone. The results show that it is feasible to develop a diagnostic system based on microwave transmission through a system consisting of gaps in a limestone media, such as a fluidized bed. The gap has been shown to perturb the transmitted power, and to be very sensitive to bubble and bed material dimensions. Resonance effects are shown to occur when dimensions are integer multiples of a quarter wavelength.

Results on the two-photon production of the eta', f(1270), A/sub 2/(1310), and f'(1515) mesons at SPEAR energies are presented using data taken with the Mark II detector. The radiative width of the eta' has been determined to be GAMMA/sub ..gamma gamma../(eta') = 5.8 +- 1.1 keV (20% systematic uncertainty). Upper limits for the radiative widths of the f, A/sub 2/, and f' have been determined.

We are investigating the interactive process between turbulent flow and dispersed phase particles. We are focusing on the mechanisms that appear to result in a reduction of local turbulent intensity and a corresponding reduction in wall heat transfer and subsequent wall erosion in turbulent solid propellant combustion flow. We apply computational simulations and physical experiments specialized to a developing free shear layer over a rearward facing step and over a parallel splitter plate. The flow configuration evolves in a two-dimensional, steady, combustion and non-combustion turbulent free shear mixing region, with and without particle additives. The computational simulations combine three basic components: gas phase Navier-Stokes solutions, Lagrange particle field solutions and a Monte Carlo technique for the random encounters, forces and accelerations between the two fields. We concentrate here on relatively large sized additive particles (of the order of tens of microns to 100 microns mean diameter). We examine their apparent influence in breaking up the larger, energy bearing eddy structures into smaller structures which are more readily dissipated.

This progress report is submitted at the end of the first year of a 3-year project grant studying development of a nuclear pumped atomic iodine laser. The first section of the report will provide background on the study and briefly describe the original plans for the 3-year project. The second section will detail the work done to date. Included will be a description of the preparations made for experimentation, as well as some preliminary results recently obtained. Plans for the upcoming budget year are covered in the accompanying proposal, Project Plans for 1989--1990.''