The concept of correction of the magnetization sextupole became a topic of discussion as soon as it was realized that superconductor magnetization could have a serious effect on the SSC beam during injection. Several methods of correction were proposed. These included (1) correction with active bore tube windings like those on the HERA machine which correct out magnetization sextupole and the sextupole due to iron saturation, (2) correction with persistent sextupole windings mounted on the bore tube (3) correction using passive superconductor (4) correction using ferromagnetic material, and (5) correction using oriented magnetized materials. This report deals with the use of passive superconductor to correct the magnetization sextupole. Two basic methods are explored in this report: (1) One can correct the magnetization sextupole by changing the diameter of the superconductor filaments in one or more blocks of the SSC dipole. (2) One can correct the magnetization sextupole and decapole by mounting passive superconducting wires on the inside of the SSC dipole coil bore. In addition, an assessment of the contribution of each conductor in the dipole to the magnetization sextupole and decapole is shown. 38 refs, 25 figs., 15 tabs.

Modified Alloys 316 and 800H, designed for high temperature service, have been developed at Oak Ridge National Laboratory. Assessment of the weldability of the advanced austenitic alloys has been conducted at the University of Tennessee. Four aspects of weldability of the advanced austenitic alloys were included in the investigation.

The linac injector for the Advanced Light Source (ALS) at LBL was recently put into operation. Energy is 50 MeV, frequency 3 GHz. The electron gun delivers up to 6nC in a 3.0-ns bunch at 120 kV. A train of bunches is injected into a 1-Hz booster and accelerated to 1.5 GHz for storage ring injection. A magnetic analysis system is used for optimizing the linac. Measured beam properties from the gun and after acceleration in the linac are described. 9 refs., 3 figs.

The Western Area Power Administration (Western), an agency of the United States Department of Energy, is proposing to construct the 115-kV Wolf Point Substation near Wolf Point in Roosevelt County, Montana (Figure 1). As part of the construction project, Western's existing Wolf Point Substation would be taken out of service. The existing 115-kV Wolf Point Substation is located approximately 3 miles west of Wolf Point, Montana (Figure 2). The substation was constructed in 1949. The existing Wolf Point Substation serves as a Switching Station'' for the 115-kV transmission in the region. The need for substation improvements is based on operational and reliability issues. For this environmental assessment (EA), the environmental review of the proposed project took into account the removal of the old Wolf Point Substation, rerouting of the five Western lines and four lines from the Cooperatives and Montana-Dakota Utilities Company, and the new road into the proposed substation. Reference to the new proposed Wolf Point Substation in the EA includes these facilities as well as the old substation site. The environmental review looked at the impacts to all resource areas in the Wolf Point area. 7 refs., 6 figs.

The populations of ground electronic state atomic hydrogen and ground electronic state, vibrationally-rotationally excited hydrogen molecules in a negative hydrogen ion source discharge have been measured using vacuum ultraviolet (VUV) laser absorption spectroscopy. Vibrational states up to v=8 and rotational levels as high as J=15 have been measured. The measurements have been made under a range of discharge conditions. The complete vibrational population distribution for v=1-8, J=1 has been obtained. The vibrational distribution appears to be thermalized and does not exhibit a plateau'' at the higher vibrational levels, in contrast to most models of this system. In contrast, the high rotational states are populated suprathermally. These determinations indicate that rotationally excited molecules may play an important role in the production of H{sup minus} in these sources. 5 refs., 5 figs.

The effect of Au on the reliability of 0.65 mm pitch surface mount solder joints between plastic quad flat packs and Cu-Ni-Au FR-4 printed circuit boards was investigated. Cu-Ni-Au is a desirable printed circuit board finish for multi-chip modules or printed circuit boards that would otherwise require a selective Au finish, for example for edge connectors or wire bondable parts. However, Au is known to embrittle solder when it is present in sufficiently high concentrations, creating a concern that solder joint fatigue life in service will also be adversely affected. This paper reports the results of mechanical shock, mechanical vibration and thermal cycling testing of fine pitch solder joints containing varying amounts of Au. Tests were performed on as-soldered joints and on joints that had been heat-treated to evolve the microstructure toward equilibrium. The tests were designed to accelerate in-service conditions in a typical industrial environment. Under these conditions, the Au concentrations tested did not promote solder joint failures. Microstructural characterization of the distribution and morphology of the Au-, Ni-, and Cu-Sn intermetallics in the joint before and after accelerated testing was also performed. On the basis of these observations it is recommended that the Au concentration in solder joints …

The effectiveness of water sprays in absorbing HF releases was recently demonstrated in extended laboratory and field tests. In this paper, computer simulations are presented of the Hawk, Nevada Test Site, series of field tests. The model used, HFSPRAY, is a Eulerean/Lagrangian model which simulates the momentum, mass and energy interactions between a water spray and a turbulent plume of HF in air; the model can predict the flow velocities, temperature, water vapor, and HF concentration fields in two-dimensional large- geometries for spraying in any direction, (i.e., down-flow, inclined-down-flow, up-flow, and co-current horizontal flow). The model was validated against recent data on spraying of water on large releases of HF. 17 refs., 11 figs., 4 tabs.

The Integrated Environmental Control Model (IECM) was designed to permit the systematic evaluation of environmental control options for pulverized coal-fired (PC) power plants. Of special interest was the ability to compare the performance and cost of advanced pollution control systems to conventional'' technologies for the control of particulate, SO{sub 2} and NO{sub x}. Of importance also was the ability to consider pre-combustion, combustion and post-combustion control methods employed alone or in combination to meet tough air pollution emission standards. Finally, the ability to conduct probabilistic analyses is a unique capability of the IECM. Key results are characterized as distribution functions rather than as single deterministic values. (VC)

A jet-cell based vertex chamber has been built for the D{O} experiment at Fermilab and operated in a test beam there. Low drift velocity and diffusion properties were achieved using CO{sub 2}(95%)-ethane(5%) at atmospheric pressure. The drift velocity is found to be consistent with (9.74+8.68( E -1.25)) {mu}m/nsec where E is the electric field strength in (kV/cm < E z 1.6 kV/cm.) An intrinsic spatial resolution of 60 {mu}m or better for drift distances greater than 2 mm is measured. The track pair efficiency is estimated to be better than 90% for separations greater than 630 {mu}m. 8 refs., 6 figs., 1 tab.

The objective of this project is to demonstrate on a commercial scale several innovative applications of cost-reducing technology to the Chiyoda Thoroughbred-121 (CT-121) process. CT-121 is a second generation flue gas desulfurization (FGD) process which is considered by the Electric Power Research Institute (EPRI) and Southern Company Services (SCS) to be one of the most reliable and lowest cost FGD options for high-sulfur coal-fired utility boiler applications. Demonstrations of the innovative design approaches will further reduce the cost and provide a clear advantage to CT121 relative to competing technology.

The Advanced Light Source (ALS), now under construction at Lawrence Berkeley Laboratory, is a third-generation synchrotron radiation source designed to produce extremely bright photon beams in the UV and soft X-ray regions. The lattice magnets to be installed in the two rings, a 1--1.9 GeV storage ring, and a 1.5 GeV booster synchrotron, have been magnetically measured to ascertain their excitation curves and field uniformity. In this paper the analysis of these data is discussed, and results for measured magnets are given. 5 refs., 2 figs., 7 tabs.

It is hardly necessary to emphasize the importance that an accurate prediction of the parameters of critical flow plays in a number of industries, notably in nuclear reactor safety calculations and in metering. In spite of its importance, the literature of the subject still contains erroneous statements. Many of them result from an unjustified belief in the generality of certain conclusions drawn in the elementary study of one-dimensional isentropic flow of a perfect gas with constant specific heats through a convergent-divergent (de Laval) nozzle. This lecture will present a complete and consistent theory of such flows, applicable to any fluid (single- or multiphase) and any channel shape. The study is restricted to the one-dimensional approximation, and, although only adiabatic conditions are discussed, the formalism can be extended to arbitrary conditions at the boundary of the channel. A scrutiny of some of the latest critical reviews of the state of the art of modelling thermal-hydraulic phenomena, especially in the context of LWR safety analysis, reveals the persistence of some misconceptions concerning the nature of the flow and of the relation between the preferred mathematical model and its discretized equivalent. It has recently become clear that the ensemble of trajectories in phase …

Development of automated test equipment for an advanced telemetry system requires continuous monitoring of PCM data while exercising telemetry inputs. This requirements leads to a large amount of data that needs to be stored and later analyzed. For example, a data stream of 4 Mbits/s and a test time of thirty minutes would yield 900 Mbytes of raw data. With this raw data, information needs to be stored to correlate the raw data to the test stimulus. This leads to a total of 1.8 Gb of data to be stored and analyzed. There is no method to analyze this amount of data in a reasonable time. A data compression method is needed to reduce the amount of data collected to a reasonable amount. The solution to the problem was data reduction. Data reduction was accomplished by real time limit checking, time stamping, and smart software. Limit checking was accomplished by an eight state finite state machine and four compression algorithms. Time stamping was needed to correlate stimulus to the appropriate output for data reconstruction. The software was written in the C programming language with a DOS extender used to allow it to run in extended mode. A 94--98% compression in …

The Bonneville Power Administration (BPA) initiated the Augmented Fish Health Monitoring project in 1986. This project was a five year interagency project involving fish rearing agencies in the Columbia Basin. Historically, all agencies involved with fish health in the Columbia Basin were conducting various levels of fish health monitoring, pathogen screening and collection. The goals of this project were; to identify, develop and implement a standardized level of fish health methodologies, develop a common data collection and reporting format in the area of artificial production, evaluate and monitor water quality, improve communications between agencies and provide annual evaluation of fish health information for production of healthier smolts. This completion report will contain a project evaluation, review of the goals of the project, evaluation of the specific fish health analyses, an overview of highlights of the project and concluding remarks. 8 refs., 1 fig., 4 tabs.

This 1990 report contains monitoring data from routine radiological and nonradiological environmental surveillance activities. Summaries of significant environmental compliance programs in progress such as National Environmental Policy Act (NEPA) documentation, environmental permits, environmental restoration, and various waste management programs for Sandia National Laboratories in Albuquerque (SNL, Albuquerque) are included. The maximum offsite dose impact was calculated to be 2.0 {times} 10{sup {minus}3} mrem. The total 50-mile population received a collective dose of 0.82 person-rem during 1990 from SNL, Albuquerque, operations. As in the previous year, the 1990 SNL operations had no adverse impact on the general public or on the environment. This report is prepared for the US Department of Energy in compliance with DOE Order 5400.1. 97 refs., 30 figs., 137 tabs.

There is no routine radioactive emission from Sandia National Laboratories, Tonopah Test Range (SNL, TTR). However, based on the types of test activities such as air drops, gun firings, ground- launched rockets, air-launched rockets, and other explosive tests, possibilities exist that small amounts of depleted uranium (DU) (as part of weapon components) may be released to the air or to the ground because of unusual circumstances (failures) during testing. Four major monitoring programs were used in 1990 to assess radiological impact on the public. The EPA Air Surveillance Network (ASN) found that the only gamma ({gamma}) emitting radionuclide on the prefilters was beryllium-7 ({sup 7}Be), a naturally-occurring spallation product formed by the interaction of cosmic radiation with atmospheric oxygen and nitrogen. The weighted average results were consistent with the area background concentrations. The EPA Thermoluminescent Dosimetry (TLD) Network and Pressurized Ion Chamber (PIC) reported normal results. In the EPA Long-Term Hydrological Monitoring Program (LTHMP), analytical results for tritium ({sup 3}H) in well water were reported and were well below DOE-derived concentration guides (DCGs). In the Reynolds Electrical and Engineering Company (REECo) Drinking Water Sampling Program, analytical results for {sup 3}H, gross alpha ({alpha}), beta ({beta}), and {gamma} scan, strontium-90 ({sup …

Previously, we had only obtained extremely low xylanase activity in cultures of {ital Thermoanaerobacter ethanolicus} strain JW200, despite demonstrated xylan hydrolysis. We were not able to increase the enzyme activity or concentrate it in solution. Therefore, we decided to isolate new strains of thermophilic anaerobes with higher xylanase activity as a future source for cloning xylanases into {ital T. ethanolicus}. We now have organisms exhibiting 100-fold higher xylanase activity than JW200, but still cannot isolate or concentrate the enzyme activity except at very low yields. We have concentrated and partially purified a xylanase from strain N.D. using preparative matrix-free isoelectric focusing. We have also purified to homogeneity and partially characterized a xylosidase from {ital T. ethanolicus}. We have detected and measured arabinosidase and acetyl esterase activity in {ital T.ethanolicus}, {ital Clostridium thermohydrosulfuricum} and strain N.D. 7 refs., 2 tabs. (MHB)

Significant progress has been made toward solving the century-old problem of chromatic aberrations in diffractive optics. Our approach exploits modern materials and microfabrication technology and is very different from the purely diffractive strategy,'' which is commonly employed and which results in multiple diffractive elements separated by a finite distance. We have developed a Fresnel zone plate lens comprised of a serial stack of patterned minus-filters which allows broadband radiation to be focused (or imaged) without longitudinal or transverse chromatic aberrations. 7 refs., 4 figs.

The lepton charge asymmetry from W decaying into a lepton and a neutrino is discussed (preliminary result). This measurement gives information on parton distribution functions at low x values. The derivation of the recently published W mass value of 79.91 {plus minus} 0.39 GeV/c{sup 2} is also presented. M{sub W} is used to set an upper limit on the top quark mass. 13 refs., 4 figs., 1 tab.

A tunable, high-intensity picosecond dye laser system has been employed with electron energy analysis to investigate the dynamics of (3+1) resonance-enhanced multiphoton ionization of H{sub 2} via different vibrational levels of its B{sub 1}{Sigma}{sub u}{sup +} and C{sup 1}{Pi}{sub u} electronic states. We observe production of molecular ions in various vibrational levels, with a shift to increased population of lower vibrational states of H{sub 2}{sup +} consistent with the a.c. Stark shift of the correspondingly lower vibrational levels of the C state into resonance with the three- photon energy of the laser. Clear evidence of direct dissociation of H{sub 2} followed by single-photon ionization of the excited H atom is observed as well. Above threshold ionization of these two processes occurs readily. We also find that dissociative ionization is an increasingly important ionization pathway as the wavelength is increased. Finally, we see evidence of a new ionization pathway, which we assign to photoionization into a transient bound state created by the avoided crossing of the first repulsive electronic state of H{sub 2}{sup +}, {vert bar}2p{sigma}{sub u}, n{r angle}, with the single-photon-dressed ground state of H{sub 2}{sup +}, {vert bar}1s{sigma}{sub g},n + 1{r angle}. 6 refs., 2 figs.

This report summarizes results of recent analyses of radioactivity in fish from SRS streams near the F-Area and H-Area seepage basins. Fish were collected from headwater areas of Four Mile Creek and Pen Branch, from just below the H-Area seepage basin, and from three sites downstream in Four Mile Creek. These fish were analyzed for gross alpha and gross beta radioactivity using standard EPA methods. Levels of gross alpha and nonvolatile beta radioactivity in fish were found to be comparable to levels previously reported for these sites. Gross alpha activity was not found to be influenced by Separations Area discharges. Nonvolatile beta activity was higher in the nonvolatile beta activity was attributable to Cs-137 and K-40. The dosimetric consequences of consuming fish from this area were found to be well below DOE guidelines.

The main goals of this paper are: (1) To develop a low-pressure CVD (LPCVD) process that allows epitaxial growth at lower temperatures. Lower temperatures will allow the achievement of a sharp dopant profile at the substrate/epi-layer interface. Less out-diffusion from the substrate would allow the use of thinner epitaxial layers, which would lead to a larger depletion width in the photoactive region. LPCVD also avoids, to a great extent, gas-phase nucleation, which would cause Ge particulates to fall onto the wafer surface during growth. (2) To reduce high levels of oxygen and copper present at the wafer interface, as observed by secondary ion mass spectroscopy (SIMS). In order to achieve high-quality epitaxial layers, it is imperative that the substrate surface be of excellent quality. (3) To make and test detectors, after satisfactory epitaxial layers have been made.

The primary objective of the project was the investigation of the pore structure and reactivity changes occurring in metal/metal oxide sorbents used for desulfurization of hot coal gas during sulfidation and regeneration, with particular emphasis placed on the effects of these changes on the sorptive capacity and efficiency of the sorbents. Commercially available zinc oxide sorbents were used as model solids in our experimental investigation of the sulfidation and regeneration processes.

Volumetric measurements have been completed for CH{sub 4}, CO{sub 2}, and H{sub 2}S at temperatures from 25{degrees}C to 380{degrees}C and 2 or 3 pressures at each temperature. The H{sub 2}S and CO{sub 2} solutions are stored in aluminized mylar bags in PVC pipes with water surrounding the bags at a pressure of several atmospheres. The methane is stored in a one liter autoclave with a sliding teflon piston engaging the sides of the autoclave which separates the standard methane solution from the pressurizing fluid. The solutions are prepared at 100 to 200 atmospheres and do not need to be re-standardized after each experiment. We also have some measurements on aqueous ammonia, boric acid, and acetic acid. Preliminary calculations of the free energy of methane in water at room temperature as a function of the model parameters for the methane have been finished. In preparation for these calculations, the theory and practice of the free energy perturbation calculations was reviewed. In molecular dynamics and Monte Carlo calculations a system does not immediately equilibrate to a change in the Hamiltonian, so that there is a time lag or a configuration number lag in the response of the system. These lags cause errors …