A COMPILATION OF DATA ON SOME SPECTRA OF THORIUM (open access)

A COMPILATION OF DATA ON SOME SPECTRA OF THORIUM

A compilation of available data on the spectra of thorium is presented, including energy levels and classified lines with Zeeman effects and isotope shifts, as well as certain data on unclassified lines. The present status of knowledge of these spectra is discussed. (auth)
Date: May 22, 1958
Creator: Charles, G.W.
System: The UNT Digital Library
EXTENDED LENGTH HRE-3 SLURRY DUMP LINE TO REPLACE THROTTLING DUMP VALVE (open access)

EXTENDED LENGTH HRE-3 SLURRY DUMP LINE TO REPLACE THROTTLING DUMP VALVE

From the standpoint of erosion, a long dump line may be preferable to a throttling dump valve to achieve the pressure drop from the HRE-3 slurry blanket to the dump tank. Extended length HRE-3 dump lines in which the maximum average velocity is 20 fps, the smallest allowable line size is 1/2 in., and the time for dumping is 10 minutes are investigated. Twenty-six parallel 1/2-in. Sch. 80 pipes, each 725 ft long, or four parallel 1 1/2-in. Sch. 80 pipes each 2,000 ft long are required. To avoid localized velocities considerably higher than 20 fps as a result ef flashing, these pipes can be submerged in a 25,000 gal pool of water initially at 135 deg F and with 40 deg F allowable temperature rise. It can be concluded that if the velocity, line size, and dumping time are limited to the values listed above, use of restrictor piping to achieve the pressure drop is not very practical. If higher velocities and flashing are allowed, a cursory study indicates that for an average velocity in the range from 100 to 200 fps, one 1 1/4-in. (or smaller) line of less than 250-ft length could be used. Flashing would occur, …
Date: May 22, 1958
Creator: Haack, L.A.
System: The UNT Digital Library
Electrical Simulation of Diaphragm Feed Pump System (open access)

Electrical Simulation of Diaphragm Feed Pump System

The electical analog study of the diaphragm feed pump system resulted in changes to the system which have improved the over-all operation and reliability of the pumps. Specifically, the study showed that if the release of the high- pressure oil from the pulsator through the valve on the Scott and Williams pump could be made to take place over a longer period of time, pressure oscillations could be substantially reduced. Also, pressure surges could be reduced by placing an accumulator in the pump discharge line near the check valve. Both of these have been incorporated into sulted in a quieter and smoother operation of the pumping system. (auth)
Date: May 22, 1958
Creator: Pasqua, P. F.
System: The UNT Digital Library