The purpose of this plan is to document the Lawrence Livermore National Laboratory (LLNL) Waste Minimization and Pollution Prevention Awareness Program. The plan specifies those activities and methods that are or will be employed to reduce the quantity and toxicity of wastes generated at the site. The intent of this plan is to respond to and comply with (DOE's) policy and guidelines concerning the need for pollution prevention. The Plan is composed of a LLNL Waste Minimization and Pollution Prevention Awareness Program Plan and, as attachments, Program- and Department-specific waste minimization plans. This format reflects the fact that waste minimization is considered a line management responsibility and is to be addressed by each of the Programs and Departments. 14 refs.

We have developed rat thyroid and mammary clonogen transplantation systems for the study of radiogenic cancer induction at the target cell level in vivo. The epithelial cell populations of both glands contain small subpopulations of cells which are capable of giving rise to monoclonal glandular structures when transplanted and stimulated with appropriate hormones. During the end of the last grant year and the first half of the current grant year, we have completed analyses and summarized for publication: investigations on the relationship between grafted thyroid cell number and the rapidity and degree of reestablishment of the thyroid-hypothalamicpituitary axis in thyroidectomized rats maintained on a normal diet or an iodine deficient diet; studies of the persistence of, and the differentiation potential and functional characteristics of, the TSH- (thyrotropin-) responsive sub-population of clonogens during goitrogenesis, the plateau-phase of goiter growth, and goiter involution; studies of changes in the size of the clonogen sub-population during goitrogenesis, goiter involution and the response to goitrogen rechallenge; and the results of the large carcinogenesis experiment on the nature of the grafted thyroid cell number-dependent suppression of promotion/progression to neoplasia in grafts of radiation-initiated thyroid cells. We are testing new techniques for the culture, cytofluorescent analysis and …

This report summarizes EMaCC activities for fiscal year 1990 and describes the materials research programs of various offices and divisions within the department. The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further the effective use of materials expertise within the department. (JL)

We have used a temperature programmed, gas evolution technique to compare H{sub 2}S from coal and from pyrite in the presence of minerals or polymers. Pyrite decomposition in coal with H{sub 2}S release can be observed directly only if carbonate minerals, particularly iron-containing carbonates, are absent. Two distinct chemical mechanisms are required to model conversion of pyrite in coal to H{sub 2}S and pyrrhotite. Initially a reaction at pyrite grain surfaces (shrinking core model) occurs that is controlled by the rate of iron movement toward crystallite centers and by hydrogen-donor availability. Tar evolution (as indicated by methane-plus-ethane) also requires H-donors. Organic free radicals compete so efficiently for this scarce commodity that the rate of pyrite decomposition slows. At a 10 K/min heating rate, the rate of H{sub 2}S release by the H-donor mechanism reaches a maximum at 700 K and then decreases. Unimolecular decomposition of coal pyrite to FeS and S{sub 2} then occurs sharply at 830 K. Coal pyrolysis products effectively capture S{sub 2}, and the rate of H{sub 2}S release matches that of sulfur release from pure pyrite in a vacuum (0.07 mg- S/cm{sup 2}/min at 773 K). The high temperature H{sub 2}S evolution peak from coal is …

1,1'-Diruthenocenylnaphthalene has been prepared and its molecular structure has been determined by x-ray diffraction, in order to compare its structure with that of its iron analog. The molecular structure of the half oxidized form of 1,1'-diferocenylnaphthalene has also be determined. Comparison of these structures has made it possible to assign the origins of observed deformations in these substances. Polymeric, face-to-face metallocenes related to the 1,8-dimetallocenylnaphthalenes (M=Fe, Ru) have also been prepared by coupling of 1,1'-bis(chlorozinc)metallocenes with 1,8- diiodonaphthalene. A more general approach to the synthesis of polymeric face-to-face metallocenes incorporating other transition metals has been developed. This involves the sequential replacement of iodo groups in 1,8-diiodonaphthalene with cyclopentadiene and the complexation of these rings with metals. A short synthesis of 4-n-butyl-1,8-diiodonaphthalene has been achieved. The molecular structure of a 2,3-oligomeric face-to-face ferrocene has been determined and shown to have the unexpected cis arrangement of naphthalene rings. 6 refs.

An advanced version of the MELMRK computer code has been developed that provides detailed models for conservation of mass, momentum, and thermal energy within relocating streams of molten metallics during meltdown of Savannah River Site (SRS) reactor assemblies. In addition to a mechanistic treatment of transport phenomena within a relocating stream, MELMRK 2.0 retains the MOD1 capability for real-time coupling of the in-depth thermal response of participating assembly heat structure and, further, augments this capability with models for self-heating of relocating melt owing to steam oxidation of metallics and fission product decay power. As was the case for MELMRK 1.0, the MOD2 version offers state-of-the-art numerics for solving coupled sets of nonlinear differential equations. Principal features include application of multi-dimensional Newton-Raphson techniques to accelerate convergence behavior and direct matrix inversion to advance primitive variables from one iterate to the next. Additionally, MELMRK 2.0 provides logical event flags for managing the broad range of code options available for treating such features as (1) coexisting flow regimes, (2) dynamic transitions between flow regimes, and (3) linkages between heatup and relocation code modules. The purpose of this report is to provide a detailed description of the MELMRK 2.0 computer models for melt relocation. …

An attempt was made to pursue [sup 129]Xe NMR as a pore measurement technique. Samples studied were synthetic imogolite (tubular aluminosilicate with gibbsite structure), sodium Y-zeolite, and an aerogel and a xerogel. Gases used were normal Xe, [sup 13]CO[sub 2], and [sup 15]N[sub 2]. Although a completely general NMR technique for measuring pore size distributions may not be possible, information about molecular motion and interactions can be obtained, because NMR is sensitive to short range interactions (1 nm or less) and to molecular dynamics in the range 10[sup [minus]2] to 10[sup [minus]6]s.

The University of Chicago Solar Energy Group has had a continuing program and commitment to develop an advanced evacuated solar collector integrating nonimaging concentration into its design. During the period from 1985--1987, some of our efforts were directed toward designing and prototyping a manufacturable version of an Integrated Compound Parabolic Concentrator (ICPC) evacuated collector tube as part of an international cooperative effort involving six organizations in four different countries. This ``multilateral`` project made considerable progress towards a commercially practical collector. One of two basic designs considered employed a heat pipe and an internal metal reflector CPC. We fabricated and tested two large diameter (125mm) borosilicate glass collector tubes to explore this concept. The other design also used a large diameter (125mm) glass tube but with a specially configured internal shaped mirror CPC coupled to a U-tube absorber. Performance projections in a variety of systems applications using the computer design tools developed by the International Energy Agency (IEA) task on evacuated collectors were used to optimize the optical and thermal design. The long-term goal of this work continues to be the development of a high efficiency, low cost solar collector to supply solar thermal energy at temperatures up to 250{degree}C. Some …

This report contains discussions on the following topics: Experimental program at the Fermilab Tevatron Collider: FNAL E-740; Experimental program at the superconducting super collider: Solenoidal detector collaboration; Computation development program at Iowa State University: Batch after twilight running and parallel processing; Experimental program at the University of Hawaii: Deep underwater muon and neutrino detector; Global analysis of parton distributions; high energy direct photon production; photon fragmentation functions; single transverse-spin asymmetry; associated production of Higgs Boson at collider energies; Cronin effect in photoproduction and deeply inelastic scattering; and heavy meson production.

An advanced version of the MELMRK computer code has been developed that provides detailed models for conservation of mass, momentum, and thermal energy within relocating streams of molten metallics during meltdown of Savannah River Site (SRS) reactor assemblies. In addition to a mechanistic treatment of transport phenomena within a relocating stream, MELMRK 2.0 retains the MOD1 capability for real-time coupling of the in-depth thermal response of participating assembly heat structure and, further, augments this capability with models for self-heating of relocating melt owing to steam oxidation of metallics and fission product decay power. As was the case for MELMRK 1.0, the MOD2 version offers state-of-the-art numerics for solving coupled sets of nonlinear differential equations. Principal features include application of multi-dimensional Newton-Raphson techniques to accelerate convergence behavior and direct matrix inversion to advance primitive variables from one iterate to the next. Additionally, MELMRK 2.0 provides logical event flags for managing the broad range of code options available for treating such features as (1) coexisting flow regimes, (2) dynamic transitions between flow regimes, and (3) linkages between heatup and relocation code modules. The purpose of this report is to provide a detailed description of the MELMRK 2.0 computer models for melt relocation. …

The goal of this project is the development of a commercially viable, cobalt-based Fischer-Tropsch (F-T) catalyst for use in a slurry bubble column reactor. Cobalt-based catalysts have long been known as being active for F-T synthesis. They typically possess greater activity than iron-based catalysts, historically the predominant catalyst being used commercially for the conversion of syngas based on coal, but possess two disadvantages that somewhat lessen its value: (1) cobalt tends to make more methane than iron does, and (2) cobalt is less versatile with low H{sub 2}/CO ratio syngas due to its lack of water-gas shift activity. Therefore, the major objectives of this work are (1) to develop a cobalt-based F-T catalyst with low (< 5 %) methane selectivity, (2) to develop a cobalt-based F-T catalyst with water-gas shift activity, and (3) to combine both these improvements into one catalyst. It will be demonstrated that these catalysts have the desired activity, selectivity, and life, and can be made reproducibly. Following this experimental work, a design and a cost estimate will be prepared for a plant to produce sufficient quantities of catalyst for scale-up studies.

An attempt was made to pursue {sup 129}Xe NMR as a pore measurement technique. Samples studied were synthetic imogolite (tubular aluminosilicate with gibbsite structure), sodium Y-zeolite, and an aerogel and a xerogel. Gases used were normal Xe, {sup 13}CO{sub 2}, and {sup 15}N{sub 2}. Although a completely general NMR technique for measuring pore size distributions may not be possible, information about molecular motion and interactions can be obtained, because NMR is sensitive to short range interactions (1 nm or less) and to molecular dynamics in the range 10{sup {minus}2} to 10{sup {minus}6}s.

The purpose of this plan is to document the Lawrence Livermore National Laboratory (LLNL) Waste Minimization and Pollution Prevention Awareness Program. The plan specifies those activities and methods that are or will be employed to reduce the quantity and toxicity of wastes generated at the site. It is intended to satisfy Department of Energy (DOE) and other legal requirements that are discussed in Section C, below. The Pollution Prevention Awareness Program is included with the Waste Minimization Program as suggested by DOE Order 5400.1. The intent of this plan is to respond to and comply with the Department`s policy and guidelines concerning the need for pollution prevention. The Plan is composed of a LLNL Waste Minimization and Pollution Prevention Awareness Program Plan and, as attachments, Directorate-, Program- and Department-specific waste minimization plans. This format reflects the fact that waste minimization is considered a line management responsibility and is to be addressed by each of the Directorates, Programs and Departments. Several Directorates have been reorganized, necessitating changes in the Directorate plans that were published in 1991.

Feasibility of producing nano-phase Si{sub 3}N{sub 4} with improved properties, and ultrafine-grained nano-phase transparent Si{sub 3}N{sub 4} by working with amorphous nano-size powders without the use of sintering aids was investigated. The approach uses cryogenic compaction of nano-size particles under liquid nitrogen followed by pressureless sintering.

The University of Chicago Solar Energy Group has had a continuing program and commitment to develop an advanced evacuated solar collector integrating nonimaging concentration into its design. During the period from 1985--1987, some of our efforts were directed toward designing and prototyping a manufacturable version of an Integrated Compound Parabolic Concentrator (ICPC) evacuated collector tube as part of an international cooperative effort involving six organizations in four different countries. This multilateral'' project made considerable progress towards a commercially practical collector. One of two basic designs considered employed a heat pipe and an internal metal reflector CPC. We fabricated and tested two large diameter (125mm) borosilicate glass collector tubes to explore this concept. The other design also used a large diameter (125mm) glass tube but with a specially configured internal shaped mirror CPC coupled to a U-tube absorber. Performance projections in a variety of systems applications using the computer design tools developed by the International Energy Agency (IEA) task on evacuated collectors were used to optimize the optical and thermal design. The long-term goal of this work continues to be the development of a high efficiency, low cost solar collector to supply solar thermal energy at temperatures up to 250{degree}C. Some …

Tetraphenylborate (TPB) is used to precipitate radioactive 137Cs from high-level nuclear waste water at the Defense Waste Processing Facility (DWPF) operated by the US DOE at the Savannah River Plant (SRP). The process is part of the procedure for the glassification of high-level nuclear waste in preparation for its long-term geological disposal. The decontaminated waste water contains millimolar quantities of TPB that will be processed into salt concretions. The transporation and use of large amounts of TPB can potentially result in the release of TPB into soil or aquatic environments. Previous study has shown that TPB degrades in soils to initially form diphenylborinic acid (DPBA) and biphenyl. DPBA appears to degrade further into other unidentified compounds which subsequently degrade into inorganic boron. The factors which promote the abiotic degradation of TPB need to be investigated since this chemical is used in the processing of radioactive wastes. TPB and its intermediate product, DPBA, have been reported to be toxic to microorganisms and plants, dependent on soil or water environments for their survival and growth.

This report describes the progress and the plan of activities in the Feasibility Study of Health Effect in populations residing near the Pinellas Plant. The period covered by the work progress is September 1, 1992 through April 30, 1993 and the period covered by the plan of the project activities is May 1 through August 31, 1993.

Plasma kinetic theory and some examples of microinstabilities are briefly reviewed. Although the velocity space configuration of any EBIS is inherently susceptible to a number of classical beam microinstabilities, the small radial dimension of an EBIS plasma may prevent modes from occurring in EBIS traps due to physical limitation. In EBIS devices with high electron beam compression, where the potential for beam microinstabilities is great, the radial dimension is smaller than the Debye length, which renders plasma kinetic theory invalid. Potential for parametric instabilities exists due to coupling of structure excited modes into plasma modes by various mode-mode coupling ``decay`` processes.

This document provides methods to account for the different effects of different gases on the atmosphere. It discusses the rationale and uses for simplified measures to represent human-related effects on climate and provides a brief introduction to a major index, the global warming potential (GWP) index. Appendix 7.A analyzes the science underlying the development of indices for concerns about climate, which is still evolving, evaluates the usefulness of currently available indices, and presents the state of the art for numerical indices and their uncertainties. For concerns about climate, the Intergovernmental Panel on Climate Change (IPCC) has been instrumental in examining relative indices for comparing the radiative influences of greenhouse gases. The IPCC developed the concept of GWPs to provide a simple representation of the relative effects on climate resulting from a unit mass emission of a greenhouse gas. Alternative measures and variations on the definition of GWPs have also been considered and reported.

This document provides a test plan for the conduct of electric arc vitrification testing by a vendor in support of the Hanford Tank Waste Remediation System (TWRS) Low-Level Waste (LLW) Vitrification Program. The vendor providing this test plan and conducting the work detailed within it [one of seven selected for glass melter testing under Purchase Order MMI-SVV-384216] is the US Bureau of Mines, Department of the Interior, Albany Research Center, Albany, Oregon. This test plan is for Phase I activities described in the above Purchase Order. Test conduct includes feed preparation activities and melting of glass with Hanford LLW Double-Shell Slurry Feed waste simulant in a 3-phase electric arc (carbon electrode) furnace.

The Vertical Denitrating Calciner system will stabilize certain unique solutions containing fissile salts by removing the water and nitrate ion to produce a more easily stored powder. This end is achieved by high-firing the solution in the calciner. The resultant calcine is distinguished by particles which are larger and denser than those produced by the more conventional oxalate precipitation process. This criticality safety evaluation report examines criticality safety for the denitration system, installed in glovebox 188-1 at PFP. The examination shows that, due to the incorporation of standard criticality safety design techniques, the glovebox can be maintained subcritical with minimal reliance on administrative controls. The examination also shows that, ignoring the necessary administrative controls can make a criticality possible in glovebox 188-1. Section 3.0 of this report lists the necessary administrative controls.

At about 1100 on July 2, 1980, a temperature rise above normal was recorded on charts monitoring operation of the incinerator in Room 149, Building 771. The plenum overheat alarm sounded at 1215, emergency actions initiated, and the fire was extinguished and mop-up began at about 1300. Investigation determined that the fire in the plenum was caused by a heat rise in the system, a deteriorated bypass valve on the No. 3 heat exchanger (KOH scrubber), nitration of the urethane seal on the HEPA filter media to the filter frame, and accumulation of metallic fines on the filter media. It was concluded that the management system responded properly, except for the ring- down system to activate the Emergency Operations Center.

This report presents the details of the Hanford waste tank characterization study for tank 241-SX-106. The drivers and objectives of the headspace vapor sampling and analysis were in accordance with procedure that were presented in other reports. The vapor and headspace gas samples were collected and analyzed to determine the potential risks to tank farm workers due to fugitive emissions from the tank.

This report presents the details of the Hanford waste tank characterization study for tank 241-T-107. The drivers and objectives of the headspace vapor sampling and analysis were in accordance with procedure that were presented in other reports. The vapor and headspace gas samples were collected and analyzed to determine the potential risks to tank farm workers due to fugitive emissions from the tank.