A review is given of present and planned combustible radioactive waste treatment systems in the US. Advantages and disadvantages of various systems are considered. Design waste streams are discussed in relation to waste composition, radioactive contaminants by amount and type, and special operating problems caused by the waste.

Significant progress has been made toward solving the century-old problem of chromatic aberrations in diffractive optics. Our approach exploits modern materials and microfabrication technology and is very different from the purely diffractive strategy,'' which is commonly employed and which results in multiple diffractive elements separated by a finite distance. We have developed a Fresnel zone plate lens comprised of a serial stack of patterned minus-filters which allows broadband radiation to be focused (or imaged) without longitudinal or transverse chromatic aberrations. 7 refs., 4 figs.

None

The Spin Spectrometer at the Holifield Heavy Ion Research Facility (HHIRF) is a multidetector ..gamma..-ray spectrometer consisting of 72 separate NaI detector elements closely packed in a 4..pi.. geometry. The basic apparatus was constructed at Washington University and has been installed and implemented at the HHIRF at Oak Ridge National Laboratory. The spectrometer was designed especially for the investigation of the mechanisms of heavy-ion induced nuclear reactions and of the structure of nuclei with high angular momentum. The data acquisition system is described. (WHK)

The gun injects axially into a drift tank followed by a magnetic mirror. For the experiments reported here, only the guide coils outside the vacuum vessel and solenoids on the plasma gun electrodes were used; the mirror coil was not energized. A stainless steel flux conserver is placed in the mirror throat to prevent the plasma from contacting the nonconducting vacuum wall in the region of the mirror. An axis encircling array of magnetic loop probes includes four diamagnetic loops and a loop which measures the azimuthally averaged outward pointing radial component of magnetic field. These loop probes are stainless steel jacketed and form a flux conserving boundary (at a radius = 30 cm) for plasma emitted from the gun. A five tip probe that can be positioned anywhere along the axis of the experiment is used to measure internal components of magnetic field.

This report describes our initial attempts at the molecular characterization of a maize controlling element. We have prepared a cDNA probe and used it to detect changes at a locus where Ds elements are found. Evidence of their presence are indicated by changes in the restriction patterns, but there is as yet no information on the physical nature of the controlling elements nor on the kinds of rearrangements they cause.

This feasibility study examines reliability centered maintenance (RCM) as it applies to Bonneville Power Administrations (BPA) substation maintenance program. Reliability techniques are examined in evaluated. Existing BPA equipment maintenance procedures are documented. Equipment failure history is considered. Economic impacts are estimated. Various equipment instrumentation methods are reviewed. Based on this analysis a prototype system is proposed. The prototype will be implemented in two phases. Phase 1 is to be completed in 1992, it includes instrumenting one power transformer and one oil circuit breaker. Software development will focus on displaying data. Phase 2 is to be completed the following year. The remaining transformers and breakers will be instrumented during the second phase. Software development will focus on predictive maintenance techniques and maintenance decision support.

None

The objective for this experimental work was to examine the reaction mechanisms, half-collision dynamics, and other optically induced chemical effects, that are operable on a well characterized single-crystal semiconductor surface. Of particular interest were reactions induced by charge transfer from the semiconductor surface including hot carrier and thermalized carrier processes. The primary technique to measure the desorbed fragment translational energies was time-of-flight mass-spectroscopy, used in conjunction with a pulsed tunable laser source. The work was carried out in ultrahigh vacuum, thus other surface spectroscopies such as temperature-programmed desorption, (TPD), (LEED), etc. were used as needed. In the project, the photoreactions of several halogen-containing molecules on GaAs(110) surfaces have been investigated. The studies have made the first observations of several new photochemical processes on uhv prepared surfaces including intermolecular charge transfer; desorption by thermal-carrier-induced reactions (including the measurement of coverage-dependent changes in the translational energies of the desorbed products); interferometric oscillation of photoinduced reactions; and self-quenching of thermal carrier reactions on surfaces.

Significant progress was made in the May 1990--May 1991 contract period in three primary coal liquefaction research areas: catalysis, structure-reactivity studies, and novel liquefaction processes. A brief summary of the accomplishments in the past year in each of these areas is given.

A model for H/sup -/, D/sup -/ production by energetic particles reflecting from metal surfaces is discussed. The model employs the energy and angular distribution data derived from the Marlowe code. The model is applied to particles incident normally upon Cs, Ni, and Cs/Ni surfaces.

The January 1992 quarterly progress report discusses a two-dimensional finite element analysis (FEA) of the proposed retrofit MHD coil. The superconducting Cable-in-Conduit Conductor (CICC) winding pack has a smooth, semi-elliptical cross section and is supported by a similarly shaped strap which resists the electromagnetic forces tending to separate the coils on each side of the channel. The coils are designed to produce a peak on-axis field of 4.5 tesla with a nominal current density of 13.05{times}10{sup 6} A/m{sup 2}. A sketch of the magnet system and structure is shown in Fig. 1.0-1. The objective of this analysis is to quantify the highly 3-D characteristics of the proposed superconductivity magnet system, and develop an appropriate support concept. A fully paramatized 3-D finite element model of the coil and structure is developed as a means of obtaining the field and stress solutions. The flexibility of FEA and a model built using design parameters allows variations in the coil end turn bend radius, strap thickness, support details and positions to be studied. The preliminary results show the calculated stresses as a result of this iterative design process.

A plant design for a reverse osmosis (RO) membrane unit was completed. The design includes a conceptual diagram, specifications for a RO unit producing 40 gal/min of permeated product, a list of radioisotopes tested on RO units and the rejections achieved, a discussion of the principle of RO, a discussion of the upper limits of cation and anion concentrations (there are no lower limits), a discussion of membrane configurations and porosities, a discussion of factors affecting membranes, a section on calculating the membrane area needed for a particular application, and capital and operating cost calculations. The three factors found to affect the adsorption of cobalt on ion exchange resins were investigated in an interaction effects design experiment. These factors are solution pH, and sulfite and ammonium concentrations. The effects of these factors were investigated with both anionic and cationic resins. Greater than 99% of the cobalt can usually be removed from solutions at a pH between 3 and 6. A design for an ion-exchange pilot plant was completed. The design includes a schematic diagram; flow, resin, and column specifications; impurity limits; and operating and capital costs. A short theoretical discussion and process description are also included. The design retains flexibility …

This Final Report covers the work executed by Plug Power from 8/11/03 – 10/31/07 statement of work for Topic 2: advancing the state of the art of fuel cell technology with the development of a new generation of commercially viable, stationary, Back-up/Peak-Shaving fuel cell systems, the GenCore II. The Program cost was $7.2 M with the Department of Energy share being $3.6M and Plug Power’s share being $3.6 M. The Program started in August of 2003 and was scheduled to end in January of 2006. The actual program end date was October of 2007. A no cost extension was grated. The Department of Energy barriers addressed as part of this program are: Technical Barriers for Distributed Generation Systems: o Durability o Power Electronics o Start up time Technical Barriers for Fuel Cell Components: o Stack Material and Manufacturing Cost o Durability o Thermal and water management Background The next generation GenCore backup fuel cell system to be designed, developed and tested by Plug Power under the program is the first, mass-manufacturable design implementation of Plug Power’s GenCore architected platform targeted for battery and small generator replacement applications in the telecommunications, broadband and UPS markets. The next generation GenCore will be …

This is volume 2 of a two-volume report on the project. Volume 1 provides general information about industry participation and commercialization plan. This volume provides details of technical work and results.

In order to improve the luminosity, two crab cavities have been installed in KEKB HER and LER [1]. Since there is only one crab cavity in each ring, the crab cavity generates a horizontally titled bunch along the whole ring. The achieved specific luminosity with crabbed bunch is higher, but it is not as high as that from beam-beam simulation [2]. One of the suspicions is the electron cloud. The electron cloud in LER (positron beam) may distort the crabbed bunch and cause the luminosity drop. This note briefly estimates the bunch shape distortion due to the electron cloud in KEKB LER.

In this paper, we present a construction of the compact form of the exceptional Lie group F4 by exponentiating the corresponding Lie algebra f4. We realize F4 as the automorphisms group of the exceptional Jordan algebra, whose elements are 3 x 3 Hermitian matrices with octonionic entries. We use a parametrization which generalizes the Euler angles for SU(2) and is based on the fibration of F4 via a Spin(9) subgroup as a fiber. This technique allows us to determine an explicit expression for the Haar invariant measure on the F4 group manifold. Apart from shedding light on the structure of F4 and its coset manifold OP2 = F4/Spin(9), the octonionic projective plane, these results are a prerequisite for the study of E6, of which F4 is a (maximal) subgroup.

The present report begins with a brief survey of recent hypervalent iron chemistry and mentions two previously reported ferrate papers funded by the DOE/BES grant. The focus is then shifted to the seven publications acknowledging support of the grant that have not been reported since the last Progress Report, DOE/ER/14340-9, was prepared. These papers deal with: (a) the successful use of an ATR element in a stopped-flow infrared spectrometer, (b) the rationalization of a depolarization of a LiClO4 solution in polyethylene oxide high polymer, (c) an analysis of several coupled ultrasonic relaxations observed in solutions of pentoses undergoing isomerization, (d) the combination of ultrasonic absorption and Raman scattering measurements to elucidate zinc thiocyanate solutions in water, (e) the use of NMR to determine stability constants when LiClO4:12-crown-4 is dissolved in acetonitrile and in methanol, (f) the possible existence of triple ions in low permittivity solutions, and (g) the properties of a high surface area ceria aerogel. Collectively, these papers illustrate advantages of bringing several modern experimental techniques to bear on complex chemical systems.

GaAs based negative electron affinity photocathodes activated with Cs and NF{sub 3} are used as polarized electron sources for linear accelerators. It is generally believed that the activation layer consists of CsF. The activation layers of Cs-NF{sub 3} on GaAs photocathodes are herein investigated using synchrotron radiation photoelectron spectroscopy (SR-PES). F1s, N1s and other core levels are recorded at photon energies ranging from 70eV to 820eV. Surprisingly, a significant amount of nitrogen is observed in the activation layers. Two distinct species of nitrogen are observed, one of which decreases along with the Fluorine signal as the yield of the photocathode decays with time.

Neutron cross-section data are fundamental for the design ofnuclear interrogation systems, the maintenance of nuclear materials andwaste, and the understanding the consequences of nuclear catastrophe.Although a large body of nuclear data exists, it is often old,unreliable, or poorly determined. For several years we have collaborated,as part of an IAEA Coordinated Research Project, to precisely measure thepartial thermal neutron gamma ray cross sections for all elements fromhydrogen to uranium at the Budapest Reactor. These data will replace theunreliable tables of Lone et al [1], still widely in use, and will bepublished as an IAEA TECDOC.

Recently a large scale study of points in the MSSM parameter space which are problematic at the Large Hadron Collider (LHC) has been performed. This work was carried out in part to determine whether the proposed International Linear Collider (ILC) could be used to solve the LHC inverse problem. The results suggest that while the ILC will be a valuable tool, an energy upgrade may be crucial to its success, and that, in general, precision studies of the MSSM are more difficult at the ILC than has generally been believed.

Argonne National Laboratory founded the Laboratory Computing Resource Center (LCRC) in the spring of 2002 to help meet pressing program needs for computational modeling, simulation, and analysis. The guiding mission is to provide critical computing resources that accelerate the development of high-performance computing expertise, applications, and computations to meet the Laboratory's challenging science and engineering missions. In September 2002 the LCRC deployed a 350-node computing cluster from Linux NetworX to address Laboratory needs for mid-range supercomputing. This cluster, named 'Jazz', achieved over a teraflop of computing power (1012 floating-point calculations per second) on standard tests, making it the Laboratory's first terascale computing system and one of the 50 fastest computers in the world at the time. Jazz was made available to early users in November 2002 while the system was undergoing development and configuration. In April 2003, Jazz was officially made available for production operation. Since then, the Jazz user community has grown steadily. By the end of fiscal year 2007, there were over 60 active projects representing a wide cross-section of Laboratory expertise, including work in biosciences, chemistry, climate, computer science, engineering applications, environmental science, geoscience, information science, materials science, mathematics, nanoscience, nuclear engineering, and physics. Most important, many …

We study the origin of subleading soft and collinear poles of form factors and amplitudes in dimensionally-regulated massless gauge theories. In the case of form factors of fundamental fields, these poles originate from a single function of the coupling, denoted G({alpha}{sub s}), depending on both the spin and gauge quantum numbers of the field. We relate G({alpha}{sub s}) to gauge-theory matrix elements involving the gluon field strength. We then show that G({alpha}{sub s}) is the sum of three terms: a universal eikonal anomalous dimension, a universal non-eikonal contribution, given by the coefficient B{sub {delta}}({alpha}{sub s}) of {delta}(1-z) in the collinear evolution kernel, and a process-dependent short-distance coefficient function, which does not contribute to infrared poles. Using general results on the factorization of soft and collinear singularities in fixed-angle massless gauge theory amplitudes, we conclude that all such singularities are captured by the eikonal approximation, supplemented only by the knowledge of B{sub {delta}}({alpha}{sub s}). We explore the consequences of our results for conformal gauge theories, where in particular we find a simple exact relation between the form factor and the cusp anomalous dimension.

Laboratory experiments simulating many of the dynamical features of solar coronal loops have been carried out. These experiments manifest collimation, kinking, jet flows, and S-shapes. Diagnostics include high-speed photography and x-ray detectors. Two loops having opposite or the same magnetic helicity polarities have been merged and it is found that counter-helicity merging provides much greater x-ray emission. A non-MHD particle orbit instability has been discovered whereby ions going in the opposite direction of the current flow direction can be ejected from a magnetic flux tube.